UPSC ENGINEERING SERVICES EXAMINATION
Main Examination
Civil Engineering Topicwise
Conventional Solved Papers Paper-II
26
Years SOLVED PAPERS
Thoroughly revised and updated Fully solved with explanations Also useful for State Engineering Services Exams
Publications
www.madeeasypublications.org
Publications
MADE EASY Publications Pvt. Ltd Corporate Office: 44-A/4, Kalu Sarai (Near Hauz Khas Metro Station), New Delhi-110016 E-mail:
[email protected] Contact: 011-45124660, 0-8860378007 Visit us at: www.madeeasypublications.org
ESE-2021 : Main Examination Civil Engineering : Paper-II | Conventional Solved Questions : (1995-2020) © Copyright, by MADE EASY Publications. All rights are reserved. No part of this publication may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photo-copying, recording or otherwise), without the prior written permission of the above mentioned publisher of this book.
1st Edition : 2010 2nd Edition : 2011 3rd Edition : 2012 4th Edition : 2013 5th Edition : 2014 6th Edition : 2015 7th Edition : 2016 8th Edition : 2017 9th Edition : 2018 10th Edition : 2019 11th Edition : 2020
MADE EASY PUBLICATIONS has taken due care in collecting the data and providing the solutions, before publishing this book. Inspite of this, if any inaccuracy or printing error occurs then MADE EASY PUBLICATIONS owes no responsibility. MADE EASY PUBLICATIONS will be grateful if you could point out any such error. Your suggestions will be appreciated. © All rights reserved by MADE EASY PUBLICATIONS. No part of this book may be reproduced or utilized in any form without the written permission from the publisher.
During the last few decades of engineering academics, India has witnessed geometric growth in engineering graduates. It is noticeable that the level of engineering knowledge has degraded gradually, while on the other hand competition has increased in each competitive examination including GATE and UPSC examinations. Under such scenario higher level efforts are required to take an edge over other
B. Singh (Ex. IES)
competitors. The objective of MADE EASY books is to introduce a simplified approach to the overall concepts of related stream in a single book with specific presentation. The topic-wise presentation will help the readers to study & practice the concepts and questions simultaneously. The efforts have been made to provide close and illustrative solutions in lucid style to facilitate understanding and quick tricks are introduced to save time. Following tips during the study may increase efficiency and may help in order to achieve success.
Thorough coverage of syllabus of all subjects
Adopting right source of knowledge, i.e. standard reading text materials
Director’s Message
Develop speed and accuracy in solving questions
Balanced preparation of Paper-I and Paper-II subjects with focus
Practice online and offline modes of tests
Appear on self assessment tests
Good examination management
Maintain self motivation
Avoid jumbo and vague approach, which is time consuming in
on key subjects
solving the questions
Good planning and time management of daily routine
Group study and discussions on a regular basis
Extra emphasis on solving the questions
Self introspection to find your weaknesses and strengths
Analyze the exam pattern to understand the level of questions
Apply shortcuts and learn standard results and formulae to save time B. Singh (Ex. IES) CMD, MADE EASY Group
Civil Engineering
Main Examination 1.
Conventional Solved Questions
Fluid Mechanics including
5.
Hydraulic Machines & OCF .................1-183
Contents
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
2.
Fluid Properties ......................................................... 1 Manometry and Hydrostatic Forces .................... 6 Buoyancy & Floatation...........................................14 Fluid Kinematics ......................................................17 Fluid Dynamics, Flow Measurements and Vortex Flow .......................................................23 Dimensional Analysis & Model Analysis ...........30 Flow Through Pipes ................................................46 Viscous Flow of Incompressible Fluid ...............75 Turbulent Flow in Pipes .........................................82 Boundary Layer Theory .........................................83 Drag and Lift Force .................................................93 Notches and Weirs ..................................................98 Impact of Jets and Turbines .............................. 101 Pumps ..................................................................... 127 Open Channel Flow ............................................. 140
1. Properties of Soils ................................................ 452 2. Effective Stresses, Permeability and Seepage Analysis ................................................. 464 3. Compressibility and Consolidation ................. 482 4. Compaction of Soils ............................................ 495 5. Stress Distribution in Soil .................................. 500 6. Shear Strength of Soil ......................................... 505 7. Retaining Wall/Earth Pressure Theories ......... 519 8. Stability of Slopes ................................................ 532 9. Shallow Foundation and Bearing Capacity .............534 10. Deep Foundation, Sheet Pile Walls and Machine Foundation................................... 556 11. Soil Stablization and Soil Exploration ............ 571
6.
4.
Water Resources Engineering ....................235-303
Environmental Engineering .......... 304-451 1. Water Demand ...................................................... 304 2. Conduits for Transporting Water and Distribution Systems .................................. 306 3. Development of Ground Water and Well Hydraulics ..................................................... 322 4. Quality Control of Water Suppliers ................. 340 5. Water Treatment ................................................... 344 6. Design of Sewer ................................................... 375 7. Quality and Characteristics of Sewage .......... 385 8. Disposing of the Sewage Effluents ................. 391 9. Treatment of Sewage .......................................... 401 10. Air, Sound, Land Pollution and EIA ................. 423
Surveying & Geology ..................... 581-627 1. Fundamental Concepts of Surveying and Linear Measurements ................................. 581 2. Compass Surveying, Theodolites and Traverse Surveying ...................................... 582 3. Levelling, Contouring and Plane Table Surveying......................................... 597 4. Calculation of Area, Volume and Theory of Errors .................................................... 610 5. Tacheometric, Curve, Hydrographic Survey, Tides and Triangulation ...................................... 613 6. Field Astronomy and Photogrammetric Survey................................... 618
Engineering Hydrology.................. 184-234
1. Water Requirement of Crops ............................ 235 2. Design of Stable Channels and Canals .......... 252 3. Design and Construction of Gravity Dams ......................................................... 269 4. Water Logging, Theories of Seepage and Spillway .......................................................... 280 5. River Training Work, Diversion Headwork, Cross-drainage Work and Miscellaneous ..... 290
Soil Mechanics and Foundation Engineering ................ 452-580
1. Precipitation and General Aspects of Hydrology.......................... 184 2. Evaporation, Transpiration, Evapotranspiration and Stream Flow Measurement ............................... 193 3. Infiltration, Runoff and Hydrograph ............... 203 4. Floods, Flood Routing & Flood Channel ........ 220
3.
Paper-II
7.
Highway Engineering ..................... 628-686 1. 2. 3. 4.
8.
Railway Engineering ...................... 687-712 1. 2. 3. 4. 5.
9.
Highway Geometric Design .............................. 628 Traffic Engineering .............................................. 648 Pavement Design ................................................. 664 Highway Materials, Maintenance and Properties ............................ 676 Rail Joints, Welding of Rails and Signals ........ 687 Ballast, Formation and Sleepers ...................... 689 Geometric Design of the Track ......................... 694 Points and Crossing ............................................. 705 Track Stresses, Traction and Tractive Resistance .............................................. 709
Airport, Dock, Harbour and Tunnelling Engineering ................. 713-735 1. Airport ..................................................................... 713 2. Dock and Harbour ............................................... 726 3. Tunnelling .............................................................. 730
nnnn