Owner’s Manual

Get it fixed, at your home or ours! Your Home For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME® (1-800-469-4663) www.sears.com

Anytime, day or night (U.S.A. and Canada) www.sears.ca

Our Home

ROTARY LAWN MOWER 149cc Kohler Engine 21" Multi-Cut Model No. 917.384510 Product No. 6021P

For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Parts and Repair Center. 1-800-488-1222 Anytime, day or night (U.S.A. only) www.sears.com

To purchase a protection agreement (U.S.A.) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.S.A.) Para pedir servicio de reparación a domicilio, y para ordenar piezas: 1-888-SU-HOGAR® (1-888-784-6427)

1-800-361-6665 (Canada) Au Canada pour service en français: 1-800-LE-FOYERMC (1-800-533-6937) www.sears.ca

CAUTION: © Sears Brands, LLC ® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC MC Marque de commerce / MD Marque déposée de Sears Brands, LLC

Read and follow all Safety Rules and Instructions before operating this equipment Husqvarna, Charlotte, NC 28269 U.S.A.

431621 01.05.10 BY

Printed in U.S.A.

Visit our website: www.husqvarna.com

TABLE OF CONTENTS Warranty ...................................................4 Safety Rules ..........................................2-3 Product Specifications ..............................5 Assembly / Pre-Operation ........................6 Operation.............................................7-10 Maintenance Schedule ........................... 11

SERVICE NOTES

Maintenance ...................................... 11-13 Service and Adjustments...................14-15 Storage ..............................................15-16 Troubleshooting .................................16-17 Repair Parts.......................................34-38

SAFETY RULES IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Do not operate the mower when bareLook for this symbol to point out imfoot or wearing open sandals. Always portant safety precautions. It means wear substantial foot wear. CAUTION!!! BECOME ALERT!!! • Do not pull mower backwards unless absoYOUR SAFETY IS INVOLVED. lutely necessary. Always look down and beWARNING: In order to prevent accidental hind before and while moving backwards. starting when setting up, transporting, adjusting or making repairs, always disconnect • Never direct discharged material toward anyone. Avoid discharging material spark plug wire and place wire where it cannot against a wall or obstruction. Material may come in contact with plug. richochet back toward the operator. Stop WARNING: Engine exhaust, some of its the blade when crossing gravel surfaces. constituents, and certain vehicle compo• Do not operate the mower without propnents contain or emit chemicals known to er guards, plates, grass catcher or other the State of California to cause cancer and safety protective devices in place. birth defects or other reproductive harm. WARNING: Battery posts, terminals and • See manufacturer’s instructions for proper operation and installation of related accessories contain lead and lead accessories. Only use accessories apcompounds, chemicals known to the State proved by the manufacturer. of California to cause cancer and birth • Stop the blade(s) when crossing gravel defects or other reproductive harm. Wash drives, walks, or roads. hands after handling. CAUTION: Muffler and other engine • Stop the engine (motor) whenever you leave the equipment, before cleaning parts become extremely the mower or unclogging the chute. hot during operation and • Shut the engine (motor) off and wait remain hot after engine until the blade comes to complete stop has stopped. To avoid before removing grass catcher. severe burns on contact, • Mow only in daylight or good artificial light. stay away from these areas. • Do not operate the machine while under the influence of alcohol or drugs. I. GENERAL OPERATION • Never operate machine in wet grass. • Read, understand, and follow all Always be sure of your footing: keep a instructions on the machine and in the firm hold on the handle; walk, never run. manual(s) before starting. Be thoroughly • Disengage the self-propelled mechfamiliar with the controls and the proper anism or drive clutch on mowers so use of the machine before starting. equipped before starting the engine. • Do not put hands or feet near or under • If the equipment should start to vibrate rotating parts. Keep clear of the disabnormally, stop the engine (motor) and charge opening at all times. check immediately for the cause. Vibra• Only allow responsible individuals, who tion is generally a warning of trouble. are familiar with the instructions, to • Always wear safety goggles or safety glassoperate the machine. es with side shields when operating mower. • Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could II. SLOPE OPERATION be picked up and thrown by blade. Slopes are a major factor related to slip & • Be sure the area is clear of other people fall accidents which can result in severe before mowing. Stop the machine if injury. All slopes require extra caution. If anyone enters the area. 2 you feel uneasy on a slope, do not mow it.

39

KOHLER 4-CYCLE ENGINE

KEY PART NO. NO. 1

2

3

5 8 9 10 11

25 26 29 36 37 38 40 44 45 46 48 49 50 51 52 53 54 55 56 57

DESCRIPTION

14 165 01-s Starter, Recoil (Includes Key Numbers 2 and 3, Recoil Housing, Recoil Bushing, Recoil Guide Plate, Recoil Springs, Recoil Pulley, Recoil Retainer Plate and Recoil Shoulder Screw) 14 160 01-s Kit, Starter Rope, with Handle (Includes Coil Starter Rope, Recoil Starter Handle, Recoil Starter Handle Retainer and Recoil Rope Retainer) 14 379 01-s Kit, Pawl Repair (Includes Recoil Springs and Recoil Starter Pawls) 14 227 04-s Cap Assembly, Fuel 14 100 10-s Nut, Flywheel, with Serrations 14 109 02-s Cup, Starter Drive 14 025 02-s Flywheel Assembly, Aluminum 14 050 01-s Kit, Breather Filter (Includes Breather Cover Gasket, Breather Cover Spring, Breather Filter and Breather Reed) 14 090 18-s Lever, Governor 14 126 22-s Control Assembly, Fixed Speed 14 089 14-s Spring, Extension (Governor) 14 094 13-s Base, Air Cleaner 14 123 05-s Hose, Breather 14 083 01-s Element, Air Filter 14 096 09-s Cover, Air Cleaner 14 199 03-s Kit, Oil Pan (Includes Key Numbers 45 and 46) 14 032 05-s Seal, Oil 14 041 13-s Gasket, Oil Pan 14 041 16-s Gasket, Carburetor (Heat Shield) 14 853 21-s Carburetor, 12mm Auto Choke without Shutoff 14 014 29-s Crankshaft Assembly 14 340 01-s Key, Woodruff 14 017 02-s Valve, Intake 14 016 02-s Valve, Exhaust 14 841 15-s Gasket, Head 14 318 02-s Kit, Cylinder Head (Includes Key Number 93) 14 096 05-s Cover, Valve 14 041 01-s Gasket, Valve Cover

MODEL NUMBER XT149-0026-EA

KEY NO. NO. 60 61 62 64 66 70 71 72 73 74 78 79 80 81 82 83 86 89 90 93 99 100 101 123 125 126 128 129 130 131 132 133 136

153 154

38

14 314 04-s 14 068 06-s 14 067 02-s 14 584 05-s

PART DESCRIPTION

Guard Assembly, Muffler Muffler Assembly Rod Assembly, Connecting Module, Ignition (Aluminum Flywheel) 14 132 08-s Plug, Spark (RA10HC) 14 123 04-s Assembly, Dipstick and Tube (Includes Key No.s 71 and 72) 14 153 03-s O-Ring, Oil Fill Tube 14 153 01-s O-Ring, Dipstick 14 113 03-s Label, Warning 14 096 36-s Cover, Engine 14 027 03-s Housing, Blower M-641060-s Nut, Hex Flange (M6) 14 112 07 Spacer, Compression Limiter 14 072 12-s Stud, Blower Housing (Fuel Tank) 14 072 13-s Stud, Blower Housing (Ignition) 14 079 20-s Linkage, Governor (Auto Choke) 25 086 166-s Screw, Retangle Head, M6 14 096 51-s Cover, Air Cleaner Base (Breather Gas) 25 086 293-s Screw, Hex Flange (M6) 24 072 06-s Stud, Carburetor (M6) 14 065 11-s Tank, Fuel (Row) (Includes Key Number 5) 14 050 14-s Filter, Fuel (in-nipple) 14 237 04-s Clamp, Hose 25 111 61-s Hose, Fuel Low-permeation --Guard, Finger --Seal, Oil --Retainer, Valve Spring --Nut, Hex Jam (M6) --Pivot, Rocker Arm --Arm, Rocker --Stud, Rocker Arm --Fan, Flywheel (Plastic) 14 219 07-s Brake Assembly, Carburetor Side (Includes Brake Lever, Brake Spring, Flange Nuts, Brake Pad, Ground To Kill Lead, Screw, Kill Switch, Brake Bracket, Brake Lever Washer and Brake Lever Rivet) 14 237 05-s Clamp, Hose --Camshaft Assembly

DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Tall grass can hide obstacles. DO NOT: • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping.

•

•

• •

III. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. • Be alert and turn machine off if children enter the area. • Before and while walking backwards, look behind and down for small children. • Never allow children to operate machine. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling. Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle. Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device. If fuel is spilled on clothing, change clothing immediately. Never overfill fuel tank. Replace gas cap and tighten securely.

V. GENERAL SERVICE • Never run machine inside a closed area. • Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing. • Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. • Never attempt to make wheel height adjustments while the engine is running. • Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recommended parts, when necessary. • Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. • Do not change the engine governor setting or overspeed the engine. • Maintain or replace safety and instruction labels, as necessary.

IV. SAFE HANDLING OF GASOLINE Use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes and other sources of ignition. • Use only an approved container. • Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. • Never refuel the machine indoors. • Never store the machine or fuel container where there is an open flame, spark or pilot light such as a water heater or on other appliances. • Never fill containers inside a vehicle, on

WARNING: This lawn mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest Husqvarna or other authorized service center (See the REPAIR PARTS section of this manual).

3

KOHLER 4-CYCLE ENGINE

WARRANTY SECTION 1: LIMITED WARRANTY Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “Warranty Period” of the product as set forth below:

MODEL NUMBER XT149-0026-EA

(4) Additional damage to parts or components due to continued use occurring after any of the above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. HUSQVARNA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THESE PRODUCTS EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURATION TO THE WARRANTY PERIOD AS DEFINED IN THE LIMITED WARRANTY STATEMENT. HUSQVARNA RESERVES THE RIGHT TO CHANGE OR IMPROVE THE DESIGN OF THE PRODUCT WITHOUT NOTICE, AND DOES NOT ASSUME OBLIGATION TO UPDATE PREVIOUSLY MANUFACTURED PRODUCTS.

2 YEAR NON-COMMERCIAL WARRANTY: Automatic Mower, Riding lawn mowers, yard and garden tractors, walk behind mowers, tillers, chain saws, trimmers, brushcutters, clearing saws, snow blowers, handheld blowers, backpack blowers, hedge trimmers, electrical products and power-assist collection systems for noncommercial, nonprofessional, noninstitutional or nonincome producing use, except as herein stated. Emission control system components necessary to comply with CARB-TIER-II and EPA regulations. Husqvarna Safety Apparel carries a 90-day warranty from the date of the customer’s original purchase for defects in material and workmanship. Normal wear, tear or abuse is not covered under warranty. Product must be returned to Charlotte with a warranty claim form. All care and maintenance instructions must be followed as stated by the manufacturer on the care label. The fit of the protective apparel/boot is not covered under warranty.

60 61

126

Some states do not allow the exclusion of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SECTION 5: CUSTOMER RESPONSIBILITIES The product must exhibit reasonable care, maintenance, operation, storage and general upkeep as written in the maintenance section of the Owner’s/ Operator’s manual. Should an operational problem or failure occur, the product should not be used, but delivered as is to an authorized Husqvarna dealer for evaluation. Proof of purchase, as explained in section 6, rests solely with the customer.

SECTION 2: HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY Husqvarna will repair or replace defective components without charge for parts or labor if a component fails because of a defect in material or workmanship during the warranty period. SECTION 3: ITEMS NOT COVERED BY THIS WARRANTY The following items are not covered by this warranty: (1)Normal customer maintenance items which become worn through normal regular use, including, but not limited to, belts, blades, blade adapters, bulbs, filters, guide bars, lubricants, rewind springs, saw chain, spark plugs, starter ropes and tines; (2) Natural discoloration of material due to ultraviolet light; (3) Lawn and garden attachments are covered by a third party which gives a warranty, all claims for warranty should be sent to the manufacturer; and (4)Emission Control System components necessary to which are manufactured by third party engine manufacturer.

SECTION 6: PROCEDURE TO OBTAIN WARRANTY CONSIDERATION It is the Owner’s and Dealer’s responsibility to make certain that the Warranty Registration Card is properly filled out and mailed to Husqvarna Forest & Garden Company. This card should be mailed within ten (10) days from the date of purchase in order to confirm the warranty and to facilitate post-sale service.

62

93 53

128

86

93

49

55

29

37

57 129

36 131 130

89 90

48

38

153

56 154

79

40 46 44

45

To obtain the benefit of this warranty, the product believed to be defective must be delivered to an authorized Husqvarna dealer in a timely manner, no later than thirty (30) days from date of the operational problem or failure. The product must be delivered at the owner’s expense. Pick-up and delivery charges are not covered by this warranty. An authorized Husqvarna dealer can be normally located through the “Yellow Pages” of the local telephone directory or by calling 1-800-HUSKY62 for a dealer in your area. HUSQVARNA 7349 Statesville Road Charlotte, NC 28269 531 83 81-23 2002

4

79

51 83

Proof of purchase must be presented to the authorized Husqvarna dealer in order to obtain warranty service. This proof must include date purchased, model number, serial number, and complete name and address of the selling dealer.

SECTION 4: EXCEPTIONS AND LIMITATIONS This warranty shall be inapplicable to defects resulting from the following: (1) Accident, abuse, misuse, negligence and neglect, including stale fuel, dirt, abrasives, moisture, rust, corrosion, or any adverse reaction due to incorrect storage or use habits; (2) Failure to operate or maintain the unit in accordance with the Owner’s/Operator’s manual or instruction sheet furnished by Husqvarna; (3) Alterations or modifications that change the intended use of the product or affects the product’s performance, operation, safety, or durability, or causes the product to fail to comply with any applicable laws; or:

50

54 132

25 26

52

37

90

KOHLER 4-CYCLE ENGINE

MODEL NUMBER XT149-0026-EA

PRODUCT SPECIFICATIONS Serial Number: Date of Purchase: Gasoline Capacity / Type: Oil Capacity:

1.5 Quarts (Unleaded Regular) 20 Ounces

Oil Type (API SG–SL):

SAE 30 (above 32°F); SAE 10W-30 (below 32°F)

Spark Plug: Blade Bolt Torque:

Champion RC12YC (Gap: .030") 35–40 ft. lbs.

• The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above. 99 5

2

ACCESSORIES

1 3

These accessories were available when this lawn mower was produced. They are not shipped with your mower. They are also available at most Husqvarna retailers and service centers. Some of these accessories may not apply to your lawn mower.

79

100

78

101

80 81

74

80 82

90

123

8

72

101 9

70

73

71

133

90 125 64

10

66 11

136

36

5

Operator presence control bar

LIFT UP

TO REMOVE LAWN MOWER FROM CARTON

1. Remove loose parts included with mower. 2. Cut down two end corners of carton and lay end panel down flat. 3. Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle. 4. Roll lawn mower out of carton and check carton thoroughly for additional loose parts.

TO UNFOLD HANDLE IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables. 1. Raise handles until lower handle section locks into place in mowing position. 2. Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs. 3. Remove handle padding holding operator presence control bar to upper handle. Your lawn mower handle can be adjusted for your mowing comfort. Refer to “ADJUST HANDLE” in the Service and Adjustments section of this manual. Vinyl bindings

6 MOWING POSITION

LIFT UP

Upper handle

Handle knob

Lower handle

TO ASSEMBLE GRASS CATCHER 1. Put grass catcher frame into grass bag with rigid part of bag on the bottom. Make sure the frame handle is outside of the bag top. 2. Slip vinyl bindings over frame. NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using. Frame handle

HOW TO SET UP YOUR LAWN MOWER

Frame opening

TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging, see “TO CONVERT MOWER” in the Operation section of this manual.

35

194177X422 197808 169708X498 194788 132004 191574 66426 74780512 154132 185589 183281 750634 429930X004 182398 51793 17600406 401174X004 401175X004 418655 401621X004 401814X428 410385X422 410386X422 407494X005 401629 185595

PART NO.

Control Bar Upper Handle Lower Handle Rope Guide Nut, Hex Handle Bolt Wire Tie Bolt, Hex Head 5/16-18 x 3/4 Hinge Bracket Mulcher Door Engine Zone Control Cable Hex Washer Head Screw Up-Stop Bracket Handle Knob Hairpin Cotter Screw 1/4-20 x 3/8 Axle Arm Assembly, Front, LH Axle Arm Assembly, Front, RH Kit, Rear Skirt Selector Spring, Front Rear Door Assembly Handle Bracket Assembly, LH Handle Bracket Assembly, RH Wheel Adjusting Bracket Spacer Discharge Deflector

DESCRIPTION

54 55

53

46 47 48 49 50 51 52

32 33 34 35 36 37 39 40 41 42 43 44 45

KEY NO.

DESCRIPTION

Selector Spring, Rear Selector Knob Axle Arm Assembly, Rear, LH Locknut, Hex 5/16-18 Shoulder Bolt 5/16-18 Wheel & Tire Assembly, Front Flanged Locknut, Hex Frame, Grassbag Hinge Screw Spring, Rear Door, LH Spring, Rear Door, RH Bolt, Rear Door Screw, Hex Head, Threaded, Rolled 3/8-16 x 1 404763 Danger Decal 751153 Nut, Hex 401177X004 Axle Arm Assembly, Rear, RH 401277X460 Wheel & Tire Assembly, Rear 194715 Grassbag 147286 Hinge Rod 418709 Kit, Housing (Includes Key Number 46) 851084 Screw, Hex Head, Grade 8 3/8-24 x 1-3/8 850263 Helical Lockwasher 851074 Hardened Washer

401624X004 87877 401176X004 426589 401638 401273X460 409149 411949 88652 405421 405423 184193 150406

PART NO.

DESCRIPTION

21" Blade Blade Adapter Hinge Spring Engine, Kohler, Model Number XT149-0026-EA (See Breakdown) 409148 Nut, Hex 73800400 Locknut, Hex 1/4-20 88348 Washer, Flat 197480 O-Ring 197991 Clip, Cable 164265 Grip, Foam 401630 Washer, Curved 851201X004 Washer, Special, Engine 413693 Kit, Rear Baffle (Includes 3 Screws) 410589 Baffle, Rear 17411312 Screw, Rear Baffle 404764 Warning Decal (not shown) 431621 Owner’s Manual

406712 420097 152124 ---

PART NO.

Available accessories not included with mower: -71 33623 Gas Can (2.5 Gallon Container) -71 33500 Fuel Stabilizer -71 33000 SAE 30W Oil (20 Ounce Bottle)

76 77 ---

61 62 65 66 67 68 73 74 75

56 57 58 59

KEY NO.

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 25 26 29 30 31

KEY NO.

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag.

HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.384510 (PRODUCT NUMBER 6021P)

ASSEMBLY / PRE-OPERATION

OPERATION

REPAIR PARTS

53

55 54

56 57

66

These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning.

29

30

33 22

35

52

8

32

25

Operator presence control bar

31

59

33

34

44

66

30

65

43

73

36

23

19

73

36

42

37

65

49

39

61

44

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

45 30 22

73 36

Spark plug

65

66

9

Grass catcher

58

Air filter

61

8

37 73

34

30 26

Muffler

33 32 66 65

Mulcher door

Housing

4

13

14

12

11

36

5

Gasoline filler cap

20

33 62 51

77

76

3

Starter handle

Engine oil cap with dipstick

75

14

6

47

41

7

15

21

18 35 46

67

29

41 47

74

Handle knob

Wheel adjuster (on each wheel)

10

40

39

50

68

49

2

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.

1

HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.384510 (PRODUCT NUMBER 6021P)

KNOW YOUR LAWN MOWER

34

MEETS CPSC SAFETY REQUIREMENTS Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the U.S. Consumer Product Safety Commission. The blade turns when the engine is running. Operator presence control bar – must be held down to the handle to start the engine. Release to stop the engine.

7

Mulcher door – allows conversion to discharging or bagging operation. Starter handle – used for starting engine.

• To convert to mulching or discharging operation, remove grass catcher and close rear door.

The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses or wide vision safety mask worn over spectacles.

Pivot pins

Rear door

Grass catcher handle

SOLUCIÓN DE PROBLEMAS - Vea la sección apropiada en el manual amenos que esté dirigido a un centro de servico Sears. PROBLEMA Falta de fuerza

CORRECCIÓN

3. Velocidad del motor lenta. 4. Acumulación de césped, hojas o basura debajo de la segadora. 5. Demasiado aceite en motor. 6. Velocidad de recorrido demasiado rápida.

HOW TO USE YOUR LAWN MOWER ENGINE SPEED Engine speed was set at the factory for optimum performance. It is not adjustable. ENGINE ZONE CONTROL CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running. • Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the lawn mower. TO ADJUST CUTTING HEIGHT Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns. • To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting. NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9position adjusters (if so equipped) allow lever to be positioned between the plate tabs. LEVER BACKWARD TO LOWER MOWER

CAUSA 1. Cuchilla desgastada, doblada o suelta. 2. Altura de las ruedas dispareja.

Catcher frame hook

SIDE DISCHARGING • Rear door must be closed. • Open mulcher door and install discharge deflector under door as shown. • Mower is now ready for discharging operation. • To convert to mulching or bagging operation, discharge deflector must be removed and mulcher door must be closed. SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR LAWN MOWER FOR MULCHING 1. Rear door closed. 2. Mulcher door closed. FOR REAR BAGGING 1. Grass catcher installed. 2. Mulcher door closed. FOR SIDE DISCHARGING 1. Rear door closed. 2. Discharge deflector installed. CAUTION: Do not run your lawn mower without rear door closed, clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open.

Plate tab

Mal cortedisparejo

3. Acumulación de césped, hojas o basura debajo de la segadora. Vibración excesiva

1. Cuchilla desgastada, doblada o suelta. 2. Cigueñal del motor doblado.

Cordón arrancador difícil de tirar

1. El freno del volante del motor está aplicado cuando se suelta la barra de control. 2. Cigueñal del motor doblado.

TO CONVERT MOWER Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging:

Open mulcher door

REAR BAGGING • Lift rear door of the lawn mower and place the grass catcher frame hooks onto the door pivot pins.

Install discharge deflector

8

1. Cambie la cuchilla. Apriete el perno de la cuchilla. 2. Ajuste todas las ruedas a la misma altura. 3. Limpie la parte inferior de la caja de la segadora. 1. Cambie la cuchilla. Apriete el perno de la cuchilla. 2. Póngase en contacto con su centro de servicio Sears o con un otro centro de servicio cualificado.

1. Presione la barra de control hacia el mango superior antes de tirar el cordón arrancador. 2. Póngase en contacto con su centro de servicio Sears o con un otro centro de servicio cualificado. 3. Adaptador de la cuchilla quebrado. 3. Cambie el adaptador de la cuchilla. 4. La cuchilla se arrastra en 4. Mueva la segadora a un lugar el césped. en donde el césped ha sido cortado o a una superficie firme para hacer arrancar el motor.

Recogedor de 1. Altura de corte demasiado baja. césped no se 2. Levantamiento de la cuchilla llena (si viene desgastado. equipado) 3. Recogedor sin ventilación de aire. Difícil de empujar

LEVER FORWARD TO RAISE MOWER Lever

1. Cuchilla desgastada, doblada o suelta. 2. Altura de las ruedas dispareja.

1. Ajuste a la posición de “Corte más alto.” 2. Ajuste a la posición de “Corte más alto.” 3. Limpie/cambie el filtro de aire. 4. Limpie la parte inferior de la caja de la segadora. 5. Revise el nivel del aceite. 6. Corte a una velocidad de recorrido más lenta.

1. El césped está demasiado alto o la altura de la rueda demasiado baja. 2. Parte trasera de la caja/cuchilla de la segadora arrastrándose en el césped. 3. Recogedor de césped demasiado lleno. 4. Posición de la altura del mango no adecuada para usted.

33

1. Eleve la altura de corte. 2. Cambie las cuchillas. 3. Limpie el recogedor de césped. 1. Eleve la altura de corte. 2. Eleve la parte trasera de la caja de la segadora (1) un lugar más alto. 3. Vacíe el recogedor de césped. 4. Ajuste la altura del mango de modo que le acomode.

ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y cámbielo con aceite de motor limpio. (Vea “MOTOR” en la sección de Mantenimento de este manual.) CILINDRO 1. Remueva la bujía. 2. Vacíe una onza (29 ml) de aceite a través del agujero de la bujía en el cilindro. 3. Tire la manilla de arranque lentamente unas cuantas veces para distribuir el aceite. 4. Vuelva a montar la nueva bujía.

• Si es posible, guarde su unidad en un recinto cerrado y cúbrala para protegerla contra el polvo y la mugre. • Cubra su unidad con un forro protector adecuado que no retenga la humedad. No use plástico. El plástico no puede respirar, lo que permite la formación de condensación, lo que producirá la oxidación de su unidad. IMPORTANTE: Nunca cubra la segadora mientras el motor y las areas de escape todavia estan calientes. PRECAUCIÓN: Nunca almacene la segadora con gasolina en el estanque dentro de un edificio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que se enfríe el motor antes de almacenarla en algún recinto cerrado.

OTROS • No guarde la gasolina de una temporada a la otra. • Cambie el envase de la gasolina si se empieza a oxidar. La oxidación y/o la mugre en su gasolina producirán problemas.

IMPORTANT: • Check oil level before each use. Add oil if needed. Fill to full line on dipstick. • Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. See “TO CHANGE ENGINE OIL” in the Maintenance section of this manual. ADD GASOLINE • Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

MOWER IS NOW READY FOR DISCHARGING OPERATION

TO EMPTY GRASS CATCHER 1. Lift up on grass catcher using the frame handle. 2. Remove grass catcher with clippings from under lawn mower handle. 3. Empty clippings from bag. NOTE: Do not drag the bag when emptying; it will cause unnecessary wear. Grass catcher frame handle

SOLUCIÓN DE PROBLEMAS - Vea la sección apropiada en el manual amenos que esté dirigido a un centro de servico Sears. PROBLEMA No arranca

CAUSA

CORRECCIÓN

1. Filtro de aire sucio. 2. Sin combustible. 3. Combustible rancio.

1. Limpie/cambie el filtro de aire. 2. Llene el estanque de combustible. 3. Vaciar el estanque y vuelva a llenarlo con combustible limpio y nuevo. 4. Agua en el combustible. 4. Vaciar el estanque y vuelva a llenarlo con combustible limpio y nuevo. 5. Alambre de la bujía desconectado. 5. Conecte el alambre a la bujía. 6. Bujía mala. 6. Cambie la bujía. 7. Cuchilla suelta o adaptador 7. Apriete el perno de la cuchilla de la cuchilla quebrado. cambie el adaptador de la cuchilla. 8. Barra de control en la 8. Presione la barra de control posición suelta. hacia el mango. 9. Barra de control defectuosa. 9. Cambie la barra de control. 10. Válvula del combustible (si equ10. Gire a la válvula del combustible ipada) está en la posición OFF. a la posición ON. 11. Batería débi (si equipada). 11. Cague la batería. 12. Desconecte el conector 12. Conecte la batería al motor. de la batería (si equipada).

32

Gasoline filler cap

BEFORE STARTING ENGINE ADD OIL Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see “ENGINE” in the Maintenance section of this manual. CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup. 1. Be sure lawnmower is level. 2. Remove oil dipstick from oil fill spout. 3. You receive a container of oil with the unit. Slowly pour the entire container down the oil fill spout into the engine. NOTE: Initial oil fill requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz. 4. Insert and tighten dipstick.

Engine oil cap

9

TO STOP ENGINE

MULCHING MOWING TIPS

• To stop engine, release operator presence control bar.

IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. See “CLEANING” in the Maintenance section of this manual. • The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades. • Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early afternoon. At this time the grass has dried, yet the newly cut area will not be exposed to direct sunlight. • For best results, adjust the lawn mower cutting height so that the lawn mower cuts off only the top one-third of the grass blades. If the lawn is overgrown it will be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of mulched grass. For extremely heavy grass, reduce your width of cut by overlapping previously cut path and mow slowly.

TO START ENGINE NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial use of the product and should be considered normal. NOTE: Your engine is equipped with an automatic choke system. No priming or choking is required before starting. • To start engine, hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

MOWING TIPS CAUTION: Do not use de-thatcher blade attachments on your mower. Such attachments are hazardous, will damage your mower and could void your warranty. • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time. • For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow slowly. • For better grass bagging and most cutting conditions, the engine speed should be set in the FAST position. • Pores in cloth grass catchers can become filled with dirt and dust with use and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using. • Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life.

MAX 1/3

• Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across (perpendicular) to the first cut path. • Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn.

10

ALMACENAMIENTO Inmediatamente prepare su segadora para el almacenamiento al final de cada temporada o si la unidad no se va a usar por 30 días o más.

Barra de control que exige la presencia del operador

POSICIÓN PARA SEGAR

SEGADORA Cuando se va a guardar la segadora por cierto período de tiempo, límpiela cuidadosamente, remueva toda la mugre, la grasa, las hojas, etc. Guárdela en un área limpia y seca. 1. Limpie toda la segadora (Vea “LIMPIEZA” en la sección de Mantenimento de este manual). 2. Lubríquela según se muestra en la sección de Mantenimento de este manual. 3. Asegúrese de que todas las tuercas y clavijas y todos los pernos y tornillos estén apretados en foma segura. Inspeccione las partes que se mueven para verificar si están dañadas, quebradas o desgastadas. Cámbielas si es necesario. 4. Retoque todas las superficies que estén oxidadas o con la pintura picada; use una lija antes de pintar.

DOBLAR HACIA ADELANTE PARA ALMACENAR

Mango superior

Manilla del mango

Mango inferior

MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es importante evitar que se formen depositos de coma en partes fundamentales del sistemade combustible tales como el carburador, el filtro del combustible, la mangura del combustible o en el estanque durante el almacenamiento. Los combustibles mezclados con alcohol (conocido come gasohol o que tienen etanol o metanol) Pueden atraer humedad, lo que conduce a la separacion y a la formación de acidos durante el almacenamiento. La gasolina acida puede danar el sistema de combustible de un motor durante el perido de almacenamiento. • Vaciar el depósito del carburante poniendo en marcha el motor y dejándolo funcionar hasta que el carburante termine y el carburador esté vacío. • Nunca use los productos para limpieza del carburador o del motor en el estanque de combustible pues se pueden producir daños permanentes. • Use combustible nuevo la próxima temporada. AVISO: El estabilizador de combustible es una alternativa aceptable para reducir a un mínimo la formación de depósitos de goma en el combustible durante el período de almacenamiento. Agregue estabilizador a la gasolina en el estanque de combustible o en el envase para el almacenamiento. Siempre siga la proporción de mezcla que se encuentra en el envase del estabilizador. Haga funcionar el motor por lo menos 10 minutos después de agregar el estabilizador, para permitir que este llegue al carburador. No drene la gasolina del estanque de gasolina y el carburador si se está usando estabilizador de combustible.

MANGO Puede doblar el mango de su segadora para el almacenamiento. 1. Apriete los extremos inferiores del mango inferior entre sí hasta que el mango inferior quede separado del puntal del mango, luego muévalo hacia adelante. 2. Suelte los pernos de montaje del mango superior lo suficiente como para permitir que el mango superior se pueda doblar hacia atrás. IMPORTANTE: Cuando doble el mango para el almacenamiento o el transporte, asegúrese que lo doble según se muestra o purde dañar los cables de control. • Cuando prepare sus mangos a partir de la posición de almacenamiento, el mango inferior automáticamente se asegurará en la posición para segar. APRIETE PARA DOBLAR Mango inferior

31

SERVICIO Y AJUSTES ADVERTENCIA: Para evitar lesiónes serias, antes de dar calquier servico o de hacer ajustes: 1. Suelte la barra de control y pare el motor. 2. Asegúrese que la cuchilla y que todas las partes movibles se hayan detenido completamente. 3. Desconecte el alambre de la bujía y póngalo en donde no pueda entrar en contacto con ésta.

MAINTENANCE

Posición para segar

Clavija de horquilla Clavija de montaje POSICIÓN BAJA

SEGADORA

BEFORE EACH USE

Posición para segar

Puntal del mango POSICIÓN ALTA

PARA AJUSTAR LA ALTURA DE CORTE Vea “PARA AJUSTAR LA ALTURA DE CORTE” en la sección de Operación de este manual.

AFTER EACH USE

EVERY 10 HOURS

EVERY 25 HOURS OR SEASON

EVERY 100 HOURS

BEFORE STORAGE

Check for Loose Fasteners Clean / Inspect Grass Catcher * Check Tires Check Drive Wheels *** Clean Lawn Mower **** Clean under Drive Cover *** Check Drive Belt / Pulleys *** Check / Sharpen / Replace Blade Lubrication Clean and Recharge Battery ** Check Engine Oil level Change Engine Oil Clean Air Filter Inspect Muffler Replace Spark Plug Replace Air Filter Paper Cartridge Empty fuel system or add Stabilizer

DESVIADOR TRASERO Se proporciona un desviador trasero, adjunto entre las ruedas traseras de su segadora, para reducir a un mínimo la posibilidad que objetos sean lanzados hacia afuera de la parte trasera de la segadora, en la posición en donde se encuentra el operador. Si se daña el desviador debe cambiarse.

* (if so equipped) ** Electric-Start mowers *** Power-Propelled mowers a scraper **** Use to clean under deck

Mango inferior

PARA AJUSTAR EL MANGO El mango puede ser montado a una posición alta o baja. Los agujeros de montaje en el mango inferior están fuera del centro para levantar y bajar el mango. 1. Remueva el mango superior y conexióne(s) el asegurar él (los) cable(s) al mango inferior. 2. Remueva las clavijas de horquilla de la clavija de montaje del puntal del mango. 3. Apreite el mango inferior hacia dentro para removerlo de las clavijas de montaje. 4. Gire el mango inferior por encima para levantar o bajar el mango. 5. Vuelva a montar las clavijas de horquilla por encima de las clavijas de montaje. 6. Vuelva a montar el mango superior y todas las partes removidas del mango inferior.

GIRAR

MOTOR VELOCIDAD DEL MOTOR La velocidad del motor ha sido ajustada en la fábrica. No trate de aumentar la velocidad del motor pues se pueden producir lesiones personales. Si cree que el motor está funcionando demasiado rápido o demasiado lento, lleve su segadora a mas con su centro de servicio cualificado. CARBURADOR Su carburador tiene un chorro principal fijo no ajustable para controlar la mezcla. Si su motor no está funcionando en forma adecuada debido a problemas que se sospecha vienen del carburador, lleve su segadora a contacto con su centro de servicio cualificado para repararla y/o ajustarla. IMPORTANTE: Nunca manipule el regulador del motor, el que ha sido ajustado en la fábrica para la velocidad del motor adecuada. Puede ser peligroso hacer funcionar el motor a una velocidad por sobre el ajuste de alta velocidad de la fábrica. Si cree que la velocidad alta regulada del motor necesita ajuste,contacto con su centro de servicio cualificado, el que cuenta con el equipo adecuado y la experiencia para hacer los ajustes necesarios.

APRIETE PARA AJUSTE Mango inferior Clavija de montaje Puntal del mango Clavija de horquilla

30

1 - Change more often if operating under a heavy load or in high outdoor temperatures. 2 - Service more often if operating in dirty or dusty conditions. 3 - Replace blades more often when mowing in sandy soil. 4 - Charge 48 hours at end of season. 5 - And after each 5 hours of use.

LUBRICATION CHART

GENERAL RECOMMENDATIONS The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual.

➀ Wheel adjuster (on each wheel) ➁ Engine oil

Some adjustments will need to be made periodically to properly maintain your unit.

➀ Mulcher

At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual. • At least once a year, replace the spark plug, clean or replace air filter element and check blade for wear. A new spark plug and clean/new air filter element assure proper air-fuel mixture and help your engine run better and last longer. • Follow the maintenance schedule in this manual.

door hinge

➀ Rear door hinge

➀ Handle bracket mounting pins ➀ Spray lubricant ➁ See "ENGINE" in Maintenance section.

BEFORE EACH USE • Check engine oil level. • Check for loose fasteners. LUBRICATION Keep unit well lubricated (See “LUBRICATION CHART”).

11

IMPORTANT: Do not oil or grease plastic wheel bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly.

LAWN MOWER Always observe safety rules when performing any maintenance. TIRES • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. BLADE CARE For best results, mower blade must be kept sharp. Replace bent or damaged blades. CAUTION: Use only a replacement blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is hazardous, could damage your mower and void your warranty. TO REMOVE BLADE 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 2. Turn lawn mower on its side. Make sure air filter and carburetor are up. 3. Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. 4. Remove blade bolt by turning counterclockwise. 5. Remove blade and attaching hardware (bolt, lock washer and hardened washer). TO REPLACE BLADE 1. Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter. 2. Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine. 3. Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft. 4. Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise. • The recommended tightening torque is 35-40 ft. lbs. Blade adapter

Key

Crankshaft keyway

Lockwasher Blade

Blade bolt Hardened washer

Trailing edge

Crankshaft 12

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual. TO SHARPEN BLADE NOTE: We do not recommend sharpening the blade - but if you do, be sure the blade is balanced. An unbalanced blade will cause eventual damage to lawn mower or engine. • The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower. • To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced. GRASS CATCHER • The grass catcher may be hosed with water, but must be dry when used. • Check your grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, replace only with approved replacement catcher shown in the Repair Parts section of this manual. Give the lawn mower model number when ordering.

ENGINE LUBRICATION Use only high quality detergent oil rated with API service classification SJ–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

Change the oil after every 25 hours of operation or at least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. TO CHANGE ENGINE OIL NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty.

1. Desconecte el alambre de la bujía y póngalo de modo que no pueda entrar en contacto con ésta. 2. Remueva la tapa del depósito del aceite; déjela a un lado en una superficie limpia. 3. Incline la cortadora de césped por este costado tal como se muestra y purgue el aceite en un recipiente idóneo. Mueva la segadora de atrás para adelante para remover todo el aceite que se haya quedado atrapado dentro del motor.

Envase

4. Limpie todo el aceite derramado en la segadora y en el lado del motor. 5. Echar aceite despacio en el conducto del aceite, parándose a intervalos regulares para controlar el nivel del aceite con la varilla. 6. Parar de añadir aceite cuando se alcanza la señal de lleno (FULL) en la varilla. Esperar un minuto para dejar que el aceite se arregle. 7. Continúe agregando cantidades pequeas de aceite y vuelva a inspeccionar la varilla medidora settles del nivel de aciete en lleno (FULL). NO sobrellene el motor con aceite, o fumará pesa demante del silenciador cuando lo valla a arrancar. 8. Asegúrese de apretar la varilla medidora del aceite antes de arrancar el motor. 9. Vuelva a conectar el alambre de la bujía a ésta. FILTRO DE AIRE Su motor puede sufrir averías y funcionar de manera incorrecta con un filtro del aire sucio. Sustituir el papel del cartucho una vez al año o tras 100 horas de funcionamiento, más a menudo si se utiliza en condiciones de suciedad y polvo particulares. No lave el filtro de aire. PARA LIMPIAR EL FILTRO DE AIRE 1. Remueva la cubierta. 2. Cuidadosamente, remueva el cartucho. 3. Límpielo golpeándolo suavemente en una superficie plana. Si está muy sucio cambie el cartucho. Cartucho

Ranuras

Cubierta

PRECAUCIÓN: Los solventes de petróleo, tales como el keroseno, no se deben usar para limpiar el cartucho. Pueden producir el deterioro de éste. No aceite el cartucho. No use aire a presión para limpiarlo o secarlo. 4. Instale el cartucho, luego vuelva a poner la cubierta. SILENCIADOR Inspeccione y cambie el silenciador si está corroído puede producir un peligro de incendio y/o daño. BUJÍA Cambie el bujía al comienzo de cada temporada de siega o después de cada 100 horas de operación, lo que suceda primero. El tipo de bujía y el ajuste de la abertura aparecen en “ESPECIFICACIONES DEL PRODUCTO” sección de este manual. FILTRO DE COMBUSTIBLE EN LINEA El filtro de combustible debe cambiarse una vez cada temporada. Si el filtro de combustible se tapona, obstruyendo el flujo del combustible hacia el carburador, es necesario cambiarlo. 1. Con el motor frío, remueva el filtro y tapone las secciones de la línea de combustible. 2. Ponga el filtro de combustible nuevo en su posición en la línea de combustible con la flecha señalando hacia el carburador. 3. Asegúrese de que no hayan fugas en la línea del combustible y que las grapas estén colocadas en forma adecuada. 4. Inmediatamente limpie toda la gasolina derramada. Abrazadera

Abrazadera

Filtro de Combustible

LIMPIEZA

IMPORTANTE: Para obtener el mejor rendimineto, mantenga la caja de la segadora sin acumulacion de cesped y basura. Limpie la parte de abajo de su segadora despues de cada uso. PRECAUCIÓN: Desconecte el alambre de la bujía y póngalo en donde no pueda entrar en contacto con ésta. • Haga descansar la segadora en su lado. Asegúrese que el filtro de aire y que el carburador queden mirando hacia arriba. Limpie la parte inferior de su segadora raspándola para remover la acumulación de césped y basura. • Limpie el motor a menudo para evitar que se acumule la basura. Un motor tapado funciona más caliente y se acorta su duración. • Mantenga las superficies pulidas y las ruedas sin gasolina, aceite, etc. • No recomendamos el uso de una manguera de jardín para limpiar la segadora a menos que el sistema eléctrico, el silenciador, el filtro de aire y el carburador estén tapados para evitar que les entre el agua. El agua en Plancha trasera 29 el motor puede acortar la duración de éste.

SEGADORA Siempre observe las reglas de seguridad cuando haga el mantenimiento. LLANTAS • Mantenga las llantas sin gasolina, aceite o substancias químicas para control de insectos que pueden dañar la goma. • Evite los tocones, las piedras, las grietas profundas, los objetos afilados y otros peligros que pueden dañar a las llantas. CUIDADO DE LA CUCHILLA Para obtener los mejores resultados, la cuchilla de la segadora tienen que mantenerse afilada. Cambie la cuchilla doblada o dañada. PRECAUCIÓN: Usar solamente la hoja de repuesto aprobada por el fabricante de su cortacésped. Usar una hoja no aprobada por el fabricante de su cortacésped es peligroso, puede dañar su cortacésped y anular su garantía. PARA REMOVER LA CUCHILLA 1. Desconecte el alambre de la bujía y póngalo en donde no pueda entrar en contacto con ésta. 2. Haga descansar la segadora en su lado. Asegúrese que el filtro de aire y que el carburador queden mirando hacia arriba. 3. Use un bloque de madera entre la cuchilla y la caja de la segadora para evitar que la cuchilla gire cuando se le quite el perno. AVISO: Proteja sus manos con guantes y/o envuelva la cuchilla con una tela gruesa. 4. Remueva el perno de la cuchilla girándolo en el sentido contrario en que giran las manillas del reloj. 5. Remueva la cuchilla y los artículos de ferretería adjuntadores (el perno, la arandela de seguridad y la arandela endurecida). PARA CAMBIAR LA CUCHILLA 1. Ponga la cuchilla en el adaptador de ésta alineando los dos (2) agujeros en la cuchilla con las salientes elevadas en el adaptador. 2. Asegúrese de que el borde de salida de la cuchilla (opuesto al borde afilado) esté hacia arriba hacia el motor. 3. Instale el perno de la cuchilla con la arandela de seguridad y la arandela endurecida en el adaptador de la cuchilla y el cigueñal. 4. Use un bloque de madera entre la cuchilla y la caja de la segadora y apriete el perno de la cuchilla girándolo en el sentido en que giran las manillas del reloj. • La torsión para apretar recomendada es de 35 – 40 pies libras. Adaptador de la cuchilla

Ranura

Chavetero del ciguenal

Arandela de seguridad Cuchilla

Perno Arandela endurecida de la Borde de salida cuchilla

Ciguénal 28

IMPORTANTE: El perno de la cuchilla es tratado a calo. Si es necesario sustituir los pernos, sustituirlos sólo con pernos aprobados mostrados en la sección Partes de Reparación de este manual. PARA AFILAR LA CUCHILLA AVISO: No recomendamos el afilar la cuchilla – pero si lo hace, asegúrese de que quede balanceada. Se tiene que tener cuidado de mantenerla balanceada. Una cuchilla que no está balanceada va a producir eventualmente daño en la segadora o en el motor. • La cuchilla puede afilarse con una lima o en una rueda rectificadora. No trate de afilarla mientras se encuentra en la segadora. • Para revisar el balance de la cuchilla, clave un clavo en una viga o en la pared. Deje alrededor de una pulgada de un clavo recto expuesto. Ponga el agujero central de la cuchilla sobre la cabeza del clavo. Si la cuchilla está balanceada debe permanecer en la posición horizontal. Si cualquiera de los extremos de la cuchilla se mueve hacia abajo, afile el extremo pesado hasta que ésta quede balanceada. RECOGEDOR DE CÉSPED • El recogedor de césped puede ser rociado con el agua de la manguera pero tiene que estar seco cuando se vaya a usar. • Revise su recogedor de césped a menudo para verificar si está dañado o deteriorado. Se va a desgastar con el uso normal. Si se necesita cambiar el recogedor, cámbielo solamente por uno que sea aprobado por el fabricante. Dé el número del modelo de la segadora cuando lo ordene.

MOTOR LUBRICACIÓN Use solamente aceite de detergente de alta calidad clasificado con la clasificación SJ–SL de servicio API. Seleccione la calidad de viscosidad SAE según su temperatura de operación esperada.

Cambie el aceite después de 25 horas de operación o por lo menos una vez al año si la segadora se utiliza menos 25 horas el año. Revise el nivel del aceite del cárter antes de arrancar el motor y después de cada cinco (5) horas de uso continuado. Apriete el tapón del aceite en forma segura cada vez que revise el nivel del aceite. PARA CAMBIAR EL ACEITE DEL MOTOR AVISO: Antes de inclinar la segadora para drenar el aceite, drene el tanque de combustible haciendo correr el motor hasta que el tanque esté vacio.

1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 2. Remove engine oil cap; lay aside on a clean surface. 3. Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine.

Container

4. Wipe off any spilled oil from lawn mower or side of engine. 5. Slowly pour oil down the oil fill spout, stopping every few ounces to check the oil level with the dipstick. 6. Stop adding oil when you reach the FULL mark on the dipstick. Wait a minute to allow oil to settle. 7. Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfill, or engine will smoke heavily from the muffler on startup. 8. Always be sure to retighten oil dipstick before starting engine. 9. Reconnect spark plug wire to plug. AIR FILTER Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions.

CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge. 4. Install cartridge, then replace cover. MUFFLER Inspect and replace corroded muffler as it could create a fire hazard and/or damage. SPARK PLUG Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual. IN-LINE FUEL FILTER The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required. 1. With engine cool, remove filter and plug fuel line sections. 2. Place new fuel filter in position in fuel line with arrow pointing towards carburetor. 3. Be sure there are no fuel line leaks and clamps are properly positioned. 4. Immediately wipe up any spilled gasoline. Clamp

Clamp

Fuel Filter

CLEANING

IMPORTANT: For best performance, keep mower housing free of built-grass and trash. Clean the underside of your mower after each use. TO CLEAN AIR FILTER CAUTION: Disconnect spark plug wire 1. Remove cover. from spark plug and place wire where it 2. Carefully remove cartridge. cannot come in contact with spark plug. 3. Clean by gently tapping on a flat sur• Clean the underside of your lawn face. If very dirty, replace cartridge. mower by scraping to remove build-up of grass and trash. Cartridge Slot • Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life. • Keep finished surfaces and wheels free of all gasoline, oil, etc. • We do not recommend using a garden hose to clean lawn mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortBack plate Cover 13 ened engine life.

SERVICE AND ADJUSTMENTS WARNING: To avoid serious injury, before performing any service and adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

Mowing position

MANTENIMENTO Mowing position

ANTES DESPUES CADA CADA CADA ANTES DEL DE CADA DE CADA 10 25 HORAS O 100 ALMACEUSO USO HORAS TEMPORADA HORAS NAMIENTO Revisar si hay Sujetadores Sueltos Limpiar/Inspeccionar el Recogedor de Césped * Controlar los Neumáticos Controlar las Ruedas Motrices ***

Hairpin Handle cotter bracket Mounting pin LOW POSITION HIGH POSITION

LAWN MOWER

Limpiar la Segadora **** Limpiar debajo la Cubierta de la Transmisión *** Revisar las Correas y las Poleas Impulsadas *** Revisar / Afilar / Cambiar la Cuchilla Lubricación

TO ADJUST CUTTING HEIGHT See “TO ADJUST CUTTING HEIGHT” in the Operation section of this manual.

Limpiar / Recargar la Batería ** Revisar el nivel del Aceite Cambiar el Aceite del motor Limpiar el Filtro de Aire

REAR DEFLECTOR The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced.

Inspeccionar el Silenciador Cambiar la Bujía Cambiar el Cartucho de Papel del Filtro de Aire Vaciar el sistema del carburante o añadir un estabilizador de carburante.

Lower handle

RECOMENDACIONES GENERALES

TO ADJUST HANDLE The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle. 1. Remove upper handle and all wire tie(s) securing cable(s) to lower handle. 2. Remove hairpin cotters from lower handle bracket mounting pin. 3. Squeeze lower handle in to remove it from mounting pins. 4. Turn lower handle over to raise or lower handle. 5. Squeeze lower handle in and position holes onto mounting pins on handle bracket. 6. Reassemble upper handle and all parts removed from lower handle.

ROTATE

ENGINE

SQUEEZE TO ADJUST Lower handle Mounting pin Handle bracket

* ** *** ****

Hairpin cotter

14

ENGINE SPEED Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to a qualified service center for repair and adjustment. CARBURETOR Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to a qualified service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governed high speed needs adjusting, contact a qualified service center, which has proper equipment and experience to make any necessary adjustments.

TABLA DE LUBRICACIÓN

La garantía de esta segadora no cubre los artículos que han estado sujetos al abuso o a la negligencia del operador. Para recibir todo el valor de la garantía, el operador tiene que mantener la segadora según las instrucciones descritas en este manual.

➀ Ajustador de la rueda

➁ Aceite

del motor

Hay algunos ajustes que se tienen que hacer en forma periódica para poder mantener su unidad adecuadamente.

➀ Puerta

de la acolchadora

Al menos una vez cada estación comprobar si es necesario efectuar los ajustes descritos en las secciones de Servicio y Ajustes de este manual.

➀ Bisagra

de la puerta traser

• Una vez al año, cambie la bujía, limpie o cambie el elemento del filtro de aire y revise si la cuchilla está desgastada. Una bujía nueva y un elemento del filtro de aire limpio/ nuevo aseguran la mezcla de aire-combustible adecuada y ayudan a que su motor funcione mejor y que dure más. • Siga el programa de mantenimiento en este manual.

➀ Clavija de montaje del puntal del mango ➀ Rocie el lubricante ➁ Vea "MOTOR" en la seccion de Mantenimiento

ANTES DE CADA USO • Revise el nivel del aceite del motor. • Revise si hay sujetadores sueltos.

IMPORTANTE: No aceite o engrase los rodamientos de la rueda de plastico. Los lubricantes viscosos atearan polvo y mugre, lo acortara la duracion de los rodamientos autolubricantes. Si cree que tienen que lubricarse, use losamente un lubricante tipo crafito, de polvo seco, en forma moderada.

LUBRICACIÓN Mantenga la unidad bien lubricada (vea la “TABLA DE LUBRICACIÓN”).

27

PARA PARAR EL MOTOR

CONSEJOS PARA SEGAR Y ACOLCHAR

• Para parar el motor, suelte la barra de controles que exigen la presencia del operador.

IMPORTANTE: Para obtener el mejor rendimiento mantenga la caja de la segadora sin acumulacion de cesped y basura. Vea “LIMPIEZA” en la seccion de Mantenimento de este manual. • La cuchilla acolchadora especial va a volver a cortar los recortes de césped muchas veces, y los reduce en tamaño, de modo que si se caen en el césped se van a dispesar entre éste y no se van a notar. También, el césped acolchado se va a deshacer rápidamente entregando substancias nutritivas para el césped. Siempre acolche con la velocidad del motor (cuchilla) más alta, pues así se obtendrá la mejor acción de recorte de las cuchillas. • Evite cortar el césped cuando esté mojado. El césped mojado tiende a formar montones e interfiere con la acción de acolchado. La mejor hora para segar el césped es temprano en la tarde. A esa hora éste se ha secado y el área recién cortada no quedará expuesta al sol directo. • Para obtener los mejores resultados, ajuste la altura del corte de la segadora de modo que ésta corte solamente el tercio superior de las hojas de césped. En el caso de que el césped haya crecido demasiado, puede ser necesario el elevar la altura del corte para reducir el esfuerzo necesario para empujar la segadora y para evitar sobrecargar el motor, dejando montones de recortes de césped. Para un césped muy pesado, reduzca el ancho del corte pasando por encima del lugar anteriormente cortado y siegue lentamente.

PARA HACER ARRANCAR EL MOTOR AVISO: Debido a las capas protectoras del motor, una cantidad pequeña de humo puede estar presente durante el uso inicial del producto y se debe considerar normal. AVISO: Su motor viene equipado con un sistema de estrangulación automático. No requiere ser cebado o obturado antes de arrancar. • Para hacer arrancar un motor, sujete la barra de controles que exigen la presencia del operador abajo en el mango y tire el mango del arrancador rápidamente. No permita que el cordón arrancador se devuelva abruptamente.

CONSEJOS PARA SEGAR PRECAUCIÓN: No utilizar dispositivos antipaja de la hoja en la segadora ya que estos accesorios son peligrosos, pueden dañar su segadora y anular su garantía. • Bajo ciertas condiciones, tal como césped muy alto, puede ser necesario el elevar la altura del corte para reducir el esfuerzo necesario para empujar la segadora y para evitar sobrecargar el motor, dejando montones de recortes de césped. Puede que sea necesario reducir la velocidad del recorrido y/o haga funcionar la segadora sobre el área por segunda vez. • Para un corte muy pesado, reduzca el ancho del corte pasando parcialmente por encima del lugar anteriormente cortado y siegue lentamente. • Para un mejor ensacado del césped y para la mayoría de las condiciones de corte, la velocidad del motor debe ajustarse a la posición de RÁPIDO. • Los poros en los recogedores de césped de tela pueden llenarse con mugre y polvo con el uso y los recogedores recaudarán menos césped. Para evitar éste, rocíe el recogedor con la manguera de agua regularmente y déjelo secarse antes de usarlo. • Mantenga la parte superior del motor, alrededor del arrancador, despejada y sin recortes de césped y paja. Esto ayudará el flujo del aire del motor y extenderá su duración.

MAX 1/3

STORAGE Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.

Operator presence control bar

LAWN MOWER When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire lawn mower (See “CLEANING” in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. 4. Touch up all rusted or chipped paint surfaces; sand lightly before painting. HANDLE You can fold your lawn mower handle for storage. 1. Squeeze the bottom ends of the lower handle toward each other until the lower handle clears the handle bracket, then move handle forward. 2. Loosen upper handle mounting bolts enough to allow upper handle to be folded back. IMPORTANT: When folding the handle for storage or transportation, be sure to fold the handle as shown or you may damage the control cables. • When setting up your handle from the storage position, the lower handle will automatically lock into the mowing position.

FOLD FORWARD FOR STORAGE

Upper handle

Handle knob

Lower handle

ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. • Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

SQUEEZE TO FOLD Lower handle • Ciertos tipos de césped y sus condiciones pueden exigir que un área tenga que ser acolchada por segunda vez para esconder completamente los recortes. Cuando se haga el segundo corte, siegue atravesado (en forma perpendicular) a la pasada del primer corte. • Cambie su patrón de corte de semana a semana. Siegue de norte a sur una semana y luego cambie de este a oeste la próxima semana. Esto evitará que el césped se enrede y cambie de dirección.

26

MOWING POSITION

15

ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual). CYLINDER 1. Remove spark plug. 2. Pour one ounce (29 ml) of oil through spark plug hole into cylinder. 3. Pull starter handle slowly a few times to distribute oil. 4. Replace with new spark plug.

OTHER • Do not store gasoline from one season to another.

• Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. • If possible, store your unit indoors and cover it to protect it from dust and dirt. • Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust. IMPORTANT: Never cover mower while engine and exhaust areas are still warm. CAUTION: Never store the lawn mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TROUBLESHOOTING - See appropriate section in manual unless directed to a Sears Parts & Repair Center. PROBLEM Does not start

CAUSE

CORRECTION

1. Dirty air filter. 2. Out of fuel. 3. Stale fuel. 4. Water in fuel. 5. Spark plug wire is disconnected. 6. Bad spark plug. 7. Loose blade or broken blade adapter. 8. Control bar in released position. 9. Control bar defective. 10. Fuel valve lever (if so equipped) in OFF position. 11. Weak battery (if equipped). 12. Disconnected battery connector (if equipped).

16

1. Clean/replace air filter. 2. Fill fuel tank. 3. Empty fuel tank and refill tank with fresh, clean gasoline. 4. Empty fuel tank and refill tank with fresh, clean gasoline. 5. Connect wire to plug. 6. Replace spark plug. 7. Tighten blade bolt or replace blade adapter. 8. Depress control bar to handle. 9. Replace control bar. 10. Turn fuel valve lever to the ON position. 11. Charge battery. 12. Connect battery to engine.

PASOS SIMPLES DE RECORDAR CUANDO CONVIERTA SU SEGADORA

AVISO: El terraplén inicial del aceite requiere solamente 18 onzas debido al aceite residual en el motor de la prueba de calidad de 100% del fabricante. Al cambiar el aceite puede necesitar 20 onzas. 4. Inserte y apriete la varilla medidora de aceite. IMPORTANTE: • Revise el nivel del aceite antes de cada uso. Agregue aceite si es necesario. Llene hasta la línea de lleno en la varilla medidora de nivel. • Cambie el aceite después de 25 horas de operación o una vez por temporada. Puede necesitar cambiar el aceite más a menudo cuando las condiciones son polvorosas o sucias. Vea “PARA CAMBIAR EL ACEITE DEL MOTOR” en la seccion de Mantenimiento de este manual. AGREGUE GASOLINA • Llene el estanque de combustible hasta la parte inferior del cuello de relleno del estanque de gasolina. No lo llene demasiado. Use gasolina regular, sin plomo, nueva y limpia con el mínimo de 87 octanos. No mezcle el aceite con la gasolina. Para asegurar que la gasolina utilizada sea fresca compre estanques los cuales puedan ser utilizados durante los primeros 30 días. ADVERTENCIA: Limpie el aceite o el combustible derramado. No almacene, derrame o use gasolina cerca de una llama expuesta. PRECAUCIÓN: Los combustibles mezclados con alcohol (conocidos como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, la que conduce a la separación y formación de ácidos durante el almacenamiento. La gasolina acídica puede dañar el sistema del combustible de un motor durante el almacenamiento. Para evitar los problemas con el motor, se debe vaciar el sistema del combustible antes de guardarlo por un período de 30 días o más. Vacíe el estanque del combustible, haga arrancar el motor y hágalo funcionar hasta que las líneas del combustible y el carburador queden vacíos. La próxima temporada use combustible nuevo. Vea las Instrucciones Para El Almacenamiento para más información. Nunca use productos de limpieza para el motor o para el carburador en el estanque del combustible pues se pueden producir daños permanentes.

PARA ACOLCHAMIENTO 1. La plancha acolchadora trasera instalada. 2. La protección contra la descarga cerrada. PARA ENSACAMIENTO TRASERO 1. La plancha acolchadora trasera removida. 2. Recogedor del césped instalado. 3. La protección contra la descarga cerrada. PARA DESCARGA LATERAL1. La plancha acolchadora trasera instalada. 2. La desviador de la descarga instalada. PRECAUCIÓN: No haga funcionar su segadora sin la placa de la acolchadora, el desviador de recortes o sin el recogedor césped aprobados en su lugar. Nunca trate de operar la segadora cuando se halla removido la puerta trasera o cuando se ha removido a puerta trasera o cuando está un poco abierta.

PARA VACIAR EL RECOGEDOR DE CÉSPED 1. Levante el recogedor de césped usando el mango del bastidor. 2. Remueva el recogedor de césped, con los recortes, de debajo del mango de la segadora. 3. Vacíe los recortes de la bolsa. AVISO: No arrastre la bolsa cuando la vacíe; se producirá un desgaste innecesario. Mango del bastidor del recogedor de césped

ANTES DE HACER ARRANCAR EL MOTOR AGREGUE ACEITE Su segadora fue enviada sin aceite en el motor. Para el tipo y el grado del aceite a utilizar, vea el “MOTOR” en la sección del Mantenimiento de este manual. PRECAUCIÓN: NO sobrellene el motor con aceite, o fumará pesa demante del silenciador cuando lo valla a arrancar. 1. Asegúrese que la segadora esté nivelada. 2. Remueva la varila medidora de aceite del tubo de desarga de aceite. 3. Usted recibe un envase de aceite con la unidad. Vierta lentamente el envase entero de aceite en el tubo de relleno del motor.

Tapa del rellenador de gasolina

25

Tapa del deposito de aceite

OPERATION

REPAIR PARTS

53

55 54

56 57

66

These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning.

29

30

33 22

35

52

8

32

25

Operator presence control bar

31

59

33

34

44

66

30

65

43

73

36

23

19

73

36

42

37

65

49

39

61

44

READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

45 30 22

73 36

Spark plug

65

66

9

Grass catcher

58

Air filter

61

8

37 73

34

30 26

Muffler

33 32 66 65

Mulcher door

Housing

4

13

14

12

11

36

5

Gasoline filler cap

20

33 62 51

77

76

3

Starter handle

Engine oil cap with dipstick

75

14

6

47

41

7

15

21

18 35 46

67

29

41 47

74

Handle knob

Wheel adjuster (on each wheel)

10

40

39

50

68

49

2

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.

1

HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.384510 (PRODUCT NUMBER 6021P)

KNOW YOUR LAWN MOWER

34

MEETS CPSC SAFETY REQUIREMENTS Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the U.S. Consumer Product Safety Commission. The blade turns when the engine is running. Operator presence control bar – must be held down to the handle to start the engine. Release to stop the engine.

7

Mulcher door – allows conversion to discharging or bagging operation. Starter handle – used for starting engine.

Operator presence control bar

LIFT UP

TO REMOVE LAWN MOWER FROM CARTON

1. Remove loose parts included with mower. 2. Cut down two end corners of carton and lay end panel down flat. 3. Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle. 4. Roll lawn mower out of carton and check carton thoroughly for additional loose parts.

TO UNFOLD HANDLE IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables. 1. Raise handles until lower handle section locks into place in mowing position. 2. Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs. 3. Remove handle padding holding operator presence control bar to upper handle. Your lawn mower handle can be adjusted for your mowing comfort. Refer to “ADJUST HANDLE” in the Service and Adjustments section of this manual. Vinyl bindings

6 MOWING POSITION

LIFT UP

Upper handle

Handle knob

Lower handle

TO ASSEMBLE GRASS CATCHER 1. Put grass catcher frame into grass bag with rigid part of bag on the bottom. Make sure the frame handle is outside of the bag top. 2. Slip vinyl bindings over frame. NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using. Frame handle

HOW TO SET UP YOUR LAWN MOWER

Frame opening

TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging, see “TO CONVERT MOWER” in the Operation section of this manual.

35

194177X422 197808 169708X498 194788 132004 191574 66426 74780512 154132 185589 183281 750634 429930X004 182398 51793 17600406 401174X004 401175X004 418655 401621X004 401814X428 410385X422 410386X422 407494X005 401629 185595

PART NO.

Control Bar Upper Handle Lower Handle Rope Guide Nut, Hex Handle Bolt Wire Tie Bolt, Hex Head 5/16-18 x 3/4 Hinge Bracket Mulcher Door Engine Zone Control Cable Hex Washer Head Screw Up-Stop Bracket Handle Knob Hairpin Cotter Screw 1/4-20 x 3/8 Axle Arm Assembly, Front, LH Axle Arm Assembly, Front, RH Kit, Rear Skirt Selector Spring, Front Rear Door Assembly Handle Bracket Assembly, LH Handle Bracket Assembly, RH Wheel Adjusting Bracket Spacer Discharge Deflector

DESCRIPTION

54 55

53

46 47 48 49 50 51 52

32 33 34 35 36 37 39 40 41 42 43 44 45

KEY NO.

DESCRIPTION

Selector Spring, Rear Selector Knob Axle Arm Assembly, Rear, LH Locknut, Hex 5/16-18 Shoulder Bolt 5/16-18 Wheel & Tire Assembly, Front Flanged Locknut, Hex Frame, Grassbag Hinge Screw Spring, Rear Door, LH Spring, Rear Door, RH Bolt, Rear Door Screw, Hex Head, Threaded, Rolled 3/8-16 x 1 404763 Danger Decal 751153 Nut, Hex 401177X004 Axle Arm Assembly, Rear, RH 401277X460 Wheel & Tire Assembly, Rear 194715 Grassbag 147286 Hinge Rod 418709 Kit, Housing (Includes Key Number 46) 851084 Screw, Hex Head, Grade 8 3/8-24 x 1-3/8 850263 Helical Lockwasher 851074 Hardened Washer

401624X004 87877 401176X004 426589 401638 401273X460 409149 411949 88652 405421 405423 184193 150406

PART NO.

DESCRIPTION

21" Blade Blade Adapter Hinge Spring Engine, Kohler, Model Number XT149-0026-EA (See Breakdown) 409148 Nut, Hex 73800400 Locknut, Hex 1/4-20 88348 Washer, Flat 197480 O-Ring 197991 Clip, Cable 164265 Grip, Foam 401630 Washer, Curved 851201X004 Washer, Special, Engine 413693 Kit, Rear Baffle (Includes 3 Screws) 410589 Baffle, Rear 17411312 Screw, Rear Baffle 404764 Warning Decal (not shown) 431621 Owner’s Manual

406712 420097 152124 ---

PART NO.

Available accessories not included with mower: -71 33623 Gas Can (2.5 Gallon Container) -71 33500 Fuel Stabilizer -71 33000 SAE 30W Oil (20 Ounce Bottle)

76 77 ---

61 62 65 66 67 68 73 74 75

56 57 58 59

KEY NO.

NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 25 26 29 30 31

KEY NO.

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag.

HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.384510 (PRODUCT NUMBER 6021P)

ASSEMBLY / PRE-OPERATION

KOHLER 4-CYCLE ENGINE

MODEL NUMBER XT149-0026-EA

PRODUCT SPECIFICATIONS Serial Number: Date of Purchase: Gasoline Capacity / Type: Oil Capacity:

1.5 Quarts (Unleaded Regular) 20 Ounces

Oil Type (API SG–SL):

SAE 30 (above 32°F); SAE 10W-30 (below 32°F)

Spark Plug: Blade Bolt Torque:

Champion RC12YC (Gap: .030") 35–40 ft. lbs.

• The model and serial numbers will be found on a decal on the rear of the lawn mower housing. Record both serial number and date of purchase in space provided above. 99 5

2

ACCESSORIES

1 3

These accessories were available when this lawn mower was produced. They are not shipped with your mower. They are also available at most Husqvarna retailers and service centers. Some of these accessories may not apply to your lawn mower.

79

100

78

101

80 81

74

80 82

90

123

8

72

101 9

70

73

71

133

90 125 64

10

66 11

136

36

5

KOHLER 4-CYCLE ENGINE

WARRANTY SECTION 1: LIMITED WARRANTY Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “Warranty Period” of the product as set forth below:

MODEL NUMBER XT149-0026-EA

(4) Additional damage to parts or components due to continued use occurring after any of the above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. HUSQVARNA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THESE PRODUCTS EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURATION TO THE WARRANTY PERIOD AS DEFINED IN THE LIMITED WARRANTY STATEMENT. HUSQVARNA RESERVES THE RIGHT TO CHANGE OR IMPROVE THE DESIGN OF THE PRODUCT WITHOUT NOTICE, AND DOES NOT ASSUME OBLIGATION TO UPDATE PREVIOUSLY MANUFACTURED PRODUCTS.

2 YEAR NON-COMMERCIAL WARRANTY: Automatic Mower, Riding lawn mowers, yard and garden tractors, walk behind mowers, tillers, chain saws, trimmers, brushcutters, clearing saws, snow blowers, handheld blowers, backpack blowers, hedge trimmers, electrical products and power-assist collection systems for noncommercial, nonprofessional, noninstitutional or nonincome producing use, except as herein stated. Emission control system components necessary to comply with CARB-TIER-II and EPA regulations. Husqvarna Safety Apparel carries a 90-day warranty from the date of the customer’s original purchase for defects in material and workmanship. Normal wear, tear or abuse is not covered under warranty. Product must be returned to Charlotte with a warranty claim form. All care and maintenance instructions must be followed as stated by the manufacturer on the care label. The fit of the protective apparel/boot is not covered under warranty.

60 61

126

Some states do not allow the exclusion of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SECTION 5: CUSTOMER RESPONSIBILITIES The product must exhibit reasonable care, maintenance, operation, storage and general upkeep as written in the maintenance section of the Owner’s/ Operator’s manual. Should an operational problem or failure occur, the product should not be used, but delivered as is to an authorized Husqvarna dealer for evaluation. Proof of purchase, as explained in section 6, rests solely with the customer.

SECTION 2: HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY Husqvarna will repair or replace defective components without charge for parts or labor if a component fails because of a defect in material or workmanship during the warranty period. SECTION 3: ITEMS NOT COVERED BY THIS WARRANTY The following items are not covered by this warranty: (1)Normal customer maintenance items which become worn through normal regular use, including, but not limited to, belts, blades, blade adapters, bulbs, filters, guide bars, lubricants, rewind springs, saw chain, spark plugs, starter ropes and tines; (2) Natural discoloration of material due to ultraviolet light; (3) Lawn and garden attachments are covered by a third party which gives a warranty, all claims for warranty should be sent to the manufacturer; and (4)Emission Control System components necessary to which are manufactured by third party engine manufacturer.

SECTION 6: PROCEDURE TO OBTAIN WARRANTY CONSIDERATION It is the Owner’s and Dealer’s responsibility to make certain that the Warranty Registration Card is properly filled out and mailed to Husqvarna Forest & Garden Company. This card should be mailed within ten (10) days from the date of purchase in order to confirm the warranty and to facilitate post-sale service.

62

93 53

128

86

93

49

55

29

37

57 129

36 131 130

89 90

48

38

153

56 154

79

40 46 44

45

To obtain the benefit of this warranty, the product believed to be defective must be delivered to an authorized Husqvarna dealer in a timely manner, no later than thirty (30) days from date of the operational problem or failure. The product must be delivered at the owner’s expense. Pick-up and delivery charges are not covered by this warranty. An authorized Husqvarna dealer can be normally located through the “Yellow Pages” of the local telephone directory or by calling 1-800-HUSKY62 for a dealer in your area. HUSQVARNA 7349 Statesville Road Charlotte, NC 28269 531 83 81-23 2002

4

79

51 83

Proof of purchase must be presented to the authorized Husqvarna dealer in order to obtain warranty service. This proof must include date purchased, model number, serial number, and complete name and address of the selling dealer.

SECTION 4: EXCEPTIONS AND LIMITATIONS This warranty shall be inapplicable to defects resulting from the following: (1) Accident, abuse, misuse, negligence and neglect, including stale fuel, dirt, abrasives, moisture, rust, corrosion, or any adverse reaction due to incorrect storage or use habits; (2) Failure to operate or maintain the unit in accordance with the Owner’s/Operator’s manual or instruction sheet furnished by Husqvarna; (3) Alterations or modifications that change the intended use of the product or affects the product’s performance, operation, safety, or durability, or causes the product to fail to comply with any applicable laws; or:

50

54 132

25 26

52

37

90

KOHLER 4-CYCLE ENGINE

KEY PART NO. NO. 1

2

3

5 8 9 10 11

25 26 29 36 37 38 40 44 45 46 48 49 50 51 52 53 54 55 56 57

DESCRIPTION

14 165 01-s Starter, Recoil (Includes Key Numbers 2 and 3, Recoil Housing, Recoil Bushing, Recoil Guide Plate, Recoil Springs, Recoil Pulley, Recoil Retainer Plate and Recoil Shoulder Screw) 14 160 01-s Kit, Starter Rope, with Handle (Includes Coil Starter Rope, Recoil Starter Handle, Recoil Starter Handle Retainer and Recoil Rope Retainer) 14 379 01-s Kit, Pawl Repair (Includes Recoil Springs and Recoil Starter Pawls) 14 227 04-s Cap Assembly, Fuel 14 100 10-s Nut, Flywheel, with Serrations 14 109 02-s Cup, Starter Drive 14 025 02-s Flywheel Assembly, Aluminum 14 050 01-s Kit, Breather Filter (Includes Breather Cover Gasket, Breather Cover Spring, Breather Filter and Breather Reed) 14 090 18-s Lever, Governor 14 126 22-s Control Assembly, Fixed Speed 14 089 14-s Spring, Extension (Governor) 14 094 13-s Base, Air Cleaner 14 123 05-s Hose, Breather 14 083 01-s Element, Air Filter 14 096 09-s Cover, Air Cleaner 14 199 03-s Kit, Oil Pan (Includes Key Numbers 45 and 46) 14 032 05-s Seal, Oil 14 041 13-s Gasket, Oil Pan 14 041 16-s Gasket, Carburetor (Heat Shield) 14 853 21-s Carburetor, 12mm Auto Choke without Shutoff 14 014 29-s Crankshaft Assembly 14 340 01-s Key, Woodruff 14 017 02-s Valve, Intake 14 016 02-s Valve, Exhaust 14 841 15-s Gasket, Head 14 318 02-s Kit, Cylinder Head (Includes Key Number 93) 14 096 05-s Cover, Valve 14 041 01-s Gasket, Valve Cover

MODEL NUMBER XT149-0026-EA

KEY NO. NO. 60 61 62 64 66 70 71 72 73 74 78 79 80 81 82 83 86 89 90 93 99 100 101 123 125 126 128 129 130 131 132 133 136

153 154

38

14 314 04-s 14 068 06-s 14 067 02-s 14 584 05-s

PART DESCRIPTION

Guard Assembly, Muffler Muffler Assembly Rod Assembly, Connecting Module, Ignition (Aluminum Flywheel) 14 132 08-s Plug, Spark (RA10HC) 14 123 04-s Assembly, Dipstick and Tube (Includes Key No.s 71 and 72) 14 153 03-s O-Ring, Oil Fill Tube 14 153 01-s O-Ring, Dipstick 14 113 03-s Label, Warning 14 096 36-s Cover, Engine 14 027 03-s Housing, Blower M-641060-s Nut, Hex Flange (M6) 14 112 07 Spacer, Compression Limiter 14 072 12-s Stud, Blower Housing (Fuel Tank) 14 072 13-s Stud, Blower Housing (Ignition) 14 079 20-s Linkage, Governor (Auto Choke) 25 086 166-s Screw, Retangle Head, M6 14 096 51-s Cover, Air Cleaner Base (Breather Gas) 25 086 293-s Screw, Hex Flange (M6) 24 072 06-s Stud, Carburetor (M6) 14 065 11-s Tank, Fuel (Row) (Includes Key Number 5) 14 050 14-s Filter, Fuel (in-nipple) 14 237 04-s Clamp, Hose 25 111 61-s Hose, Fuel Low-permeation --Guard, Finger --Seal, Oil --Retainer, Valve Spring --Nut, Hex Jam (M6) --Pivot, Rocker Arm --Arm, Rocker --Stud, Rocker Arm --Fan, Flywheel (Plastic) 14 219 07-s Brake Assembly, Carburetor Side (Includes Brake Lever, Brake Spring, Flange Nuts, Brake Pad, Ground To Kill Lead, Screw, Kill Switch, Brake Bracket, Brake Lever Washer and Brake Lever Rivet) 14 237 05-s Clamp, Hose --Camshaft Assembly

DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Tall grass can hide obstacles. DO NOT: • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping.

•

•

• •

III. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. • Be alert and turn machine off if children enter the area. • Before and while walking backwards, look behind and down for small children. • Never allow children to operate machine. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling. Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle. Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device. If fuel is spilled on clothing, change clothing immediately. Never overfill fuel tank. Replace gas cap and tighten securely.

V. GENERAL SERVICE • Never run machine inside a closed area. • Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing. • Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. • Never attempt to make wheel height adjustments while the engine is running. • Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recommended parts, when necessary. • Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. • Do not change the engine governor setting or overspeed the engine. • Maintain or replace safety and instruction labels, as necessary.

IV. SAFE HANDLING OF GASOLINE Use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes and other sources of ignition. • Use only an approved container. • Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. • Never refuel the machine indoors. • Never store the machine or fuel container where there is an open flame, spark or pilot light such as a water heater or on other appliances. • Never fill containers inside a vehicle, on

WARNING: This lawn mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest Husqvarna or other authorized service center (See the REPAIR PARTS section of this manual).

3

TABLE OF CONTENTS Warranty ...................................................4 Safety Rules ..........................................2-3 Product Specifications ..............................5 Assembly / Pre-Operation ........................6 Operation.............................................7-10 Maintenance Schedule ........................... 11

SERVICE NOTES

Maintenance ...................................... 11-13 Service and Adjustments...................14-15 Storage ..............................................15-16 Troubleshooting .................................16-17 Repair Parts.......................................34-38

SAFETY RULES IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Do not operate the mower when bareLook for this symbol to point out imfoot or wearing open sandals. Always portant safety precautions. It means wear substantial foot wear. CAUTION!!! BECOME ALERT!!! • Do not pull mower backwards unless absoYOUR SAFETY IS INVOLVED. lutely necessary. Always look down and beWARNING: In order to prevent accidental hind before and while moving backwards. starting when setting up, transporting, adjusting or making repairs, always disconnect • Never direct discharged material toward anyone. Avoid discharging material spark plug wire and place wire where it cannot against a wall or obstruction. Material may come in contact with plug. richochet back toward the operator. Stop WARNING: Engine exhaust, some of its the blade when crossing gravel surfaces. constituents, and certain vehicle compo• Do not operate the mower without propnents contain or emit chemicals known to er guards, plates, grass catcher or other the State of California to cause cancer and safety protective devices in place. birth defects or other reproductive harm. WARNING: Battery posts, terminals and • See manufacturer’s instructions for proper operation and installation of related accessories contain lead and lead accessories. Only use accessories apcompounds, chemicals known to the State proved by the manufacturer. of California to cause cancer and birth • Stop the blade(s) when crossing gravel defects or other reproductive harm. Wash drives, walks, or roads. hands after handling. CAUTION: Muffler and other engine • Stop the engine (motor) whenever you leave the equipment, before cleaning parts become extremely the mower or unclogging the chute. hot during operation and • Shut the engine (motor) off and wait remain hot after engine until the blade comes to complete stop has stopped. To avoid before removing grass catcher. severe burns on contact, • Mow only in daylight or good artificial light. stay away from these areas. • Do not operate the machine while under the influence of alcohol or drugs. I. GENERAL OPERATION • Never operate machine in wet grass. • Read, understand, and follow all Always be sure of your footing: keep a instructions on the machine and in the firm hold on the handle; walk, never run. manual(s) before starting. Be thoroughly • Disengage the self-propelled mechfamiliar with the controls and the proper anism or drive clutch on mowers so use of the machine before starting. equipped before starting the engine. • Do not put hands or feet near or under • If the equipment should start to vibrate rotating parts. Keep clear of the disabnormally, stop the engine (motor) and charge opening at all times. check immediately for the cause. Vibra• Only allow responsible individuals, who tion is generally a warning of trouble. are familiar with the instructions, to • Always wear safety goggles or safety glassoperate the machine. es with side shields when operating mower. • Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could II. SLOPE OPERATION be picked up and thrown by blade. Slopes are a major factor related to slip & • Be sure the area is clear of other people fall accidents which can result in severe before mowing. Stop the machine if injury. All slopes require extra caution. If anyone enters the area. 2 you feel uneasy on a slope, do not mow it.

39

Owner’s Manual

Get it fixed, at your home or ours! Your Home For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME® (1-800-469-4663) www.sears.com

Anytime, day or night (U.S.A. and Canada) www.sears.ca

Our Home

ROTARY LAWN MOWER 149cc Kohler Engine 21" Multi-Cut Model No. 917.384510 Product No. 6021P

For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Parts and Repair Center. 1-800-488-1222 Anytime, day or night (U.S.A. only) www.sears.com

To purchase a protection agreement (U.S.A.) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.S.A.) Para pedir servicio de reparación a domicilio, y para ordenar piezas: 1-888-SU-HOGAR® (1-888-784-6427)

1-800-361-6665 (Canada) Au Canada pour service en français: 1-800-LE-FOYERMC

• Español, p. 19

(1-800-533-6937) www.sears.ca

CAUTION: © Sears Brands, LLC ® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC MC Marque de commerce / MD Marque déposée de Sears Brands, LLC

Read and follow all Safety Rules and Instructions before operating this equipment Husqvarna, Charlotte, NC 28269 U.S.A.

431621 01.05.10 BY

Printed in U.S.A.

Visit our website: www.husqvarna.com