® Huck-Spin Fastening System The most advanced fastening system for heavy assembly and aftermarket repair.

Huck-Spin® Fastening System

Huck-Spin®. The efficient and ergonomic high strength fastening system.

P

roven a top performer for over a decade, the Huck-Spin® fastening system is the most reliable and advanced system of its kind, ideal for high volume OEM applications, heavy assembly, and aftermarket repair. In short, the patented Huck-Spin has revolutionized lockbolt technology. Because of the unique, low-impact, straight-line installation process, Huck-Spin fasteners deliver a more secure joint than any other fastening system – with installation speeds up to 50% faster than an impact wrench working with conventional nuts and bolts. The installation process is fast and effortless, and a quick, visual inspection is all that’s needed for quality control, as opposed to the lengthy torque testing required with nuts and bolts. No other fastening system can match the productivity provided by the Huck-Spin. This swaging process virtually eliminates human error, providing a more precise, consistent installation. A Huck-Spin installation retains much higher clamp load and delivers up to 8 times greater fatigue strength. The Huck-Spin system utilizes a computer-based control station featuring an easy-to-use custom interface, further ensuring a high standard of quality and productivity. And because the Huck-Spin fastener is designed with no pintail, you’ll improve factory safety and significantly reduce noise in the workplace.



With Huck-Spin, you’ll realize greater productivity while your customers eliminate problems due to fasteners loosening. Their cost of warranty repair and rework will decrease significantly, adding to their bottom line.

Pin protrusion allows easy removal with Spincutter TM system Flanged collar and head spread load to ensure structural integrity

High fatigue thread form extends the life of your structure

The Huck-Spin Advantage Overall, the Huck-Spin Fastening System offers several distinct advantages over other conventional fasteners:

Corrosion resistant coatings can be painted Excellent gap pull-out and high retained clamp

• Wider grip range • Highly sustained and consistent clamp • Fast installation • Quick, visual inspection of the fully swaged collar (no time-consuming torque check is needed) • Shock-free installation • Reduction of manufacturing noise • Elimination of pintail waste • Elimination of loosening problems • Eliminates corrosion-prone pintail breaking point

Installation Sequence

• Hex head style also available, allowing removal with a standard impact wrench • Safe, easy-to-use spin collar cutter available • Offered in metric and inch series

1

The pin is inserted into the prepared hole while the collar is threaded onto the pin by hand.

2

3

The installation tool spins onto the The tool simultaneously pulls up threaded pin, clamping the work on the pin while pushing down together tightly. the collar, pressing or swaging the collar material into the threads of the fastener for a secure, permanent joint.

4

The tool spins off, completing the installation in about half the time required for an ordinary torqued fastener.



Huck-Spin® Metric Series

Huck-Spin® Metric Series

Flanged Head A Shank B Underhead Diameter Pin/Part Number Collar Grip Range Length Length (mm) Number (ref.) (max.)

C Head Height (max.)



9.70 9.70 9.70 9.70 9.70 9.70 9.70 9.70 9.70 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 11.50 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 12.80 16.10 16.10 16.10 16.10 16.10 16.10 16.10 16.10 16.10 16.10

12 12 12 12 12 12 12 12 12 14 14 14 14 14 14 14 14 14 14 14 14 14 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20

MHSPF-DT12-10 MHSPF-DT12-15 MHSPF-DT12-20 MHSPF-DT12-25 MHSPF-DT12-30 MHSPF-DT12-35 MHSPF-DT12-40 MHSPF-DT12-45 MHSPF-DT12-50 MHSPF-DT14-10 MHSPF-DT14-15 MHSPF-DT14-20 MHSPF-DT14-25 MHSPF-DT14-30 MHSPF-DT14-35 MHSPF-DT14-40 MHSPF-DT14-45 MHSPF-DT14-50 MHSPF-DT14-55 MHSPF-DT14-60 MHSPF-DT14-65 MHSPF-DT14-70 MHSPF-DT14-75 MHSPF-DT16-10 MHSPF-DT16-15 MHSPF-DT16-17 MHSPF-DT16-20 MHSPF-DT16-25 MHSPF-DT16-30 MHSPF-DT16-35 MHSPF-DT16-40 MHSPF-DT16-45 MHSPF-DT16-50 MHSPF-DT16-55 MHSPF-DT16-60 MHSPF-DT16-65 MHSPF-DT16-70 MHSPF-DT16-75 MHSPF-DT16-90 MHSPF-DT20-15 MHSPF-DT20-20 MHSPF-DT20-25 MHSPF-DT20-30 MHSPF-DT20-35 MHSPF-DT20-40 MHSPF-DT20-45 MHSPF-DT20-50 MHSPF-DT20-55 MHSPF-DT20-60

MHSCF-R12 MHSCF-R12 MHSCF-R12 MHSCF-R12 MHSCF-R12 MHSCF-R12 MHSCF-R12 MHSCF-R12 MHSCF-R12 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R14 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R16 MHSCF-R20 MHSCF-R20 MHSCF-R20 MHSCF-R20 MHSCF-R20 MHSCF-R20 MHSCF-R20 MHSCF-R20 MHSCF-R20 MHSCF-R20

4-16 9-21 14-26 19-31 24-36 29-41 34-46 39-51 44-56 4-19 9-24 14-29 19-34 24-39 29-44 34-49 39-54 44-59 49-64 54-69 59-74 64-79 69-84 4-16 9-21 10-24 14-26 19-31 24-36 29-41 34-46 39-51 44-56 49-61 54-65 59-71 64-76 69-81 84-99 9-21 14-26 19-31 24-36 29-41 34-46 39-51 44-56 49-61 54-66

4.00 9.00 14.00 19.00 24.00 29.00 34.00 39.00 44.00 4.00 9.00 14.00 19.00 24.00 29.00 34.00 39.00 44.00 49.00 54.00 59.00 64.00 69.00 4.00 9.00 10.00 14.00 19.00 24.00 29.00 34.00 39.00 44.00 49.00 54.00 59.00 64.00 69.00 84.00 9.00 14.00 19.00 24.00 29.00 34.00 39.00 44.00 49.00 54.00

46.04 51.04 56.04 61.04 66.04 71.04 76.04 81.04 86.04 54.42 59.42 64.42 69.42 74.42 79.42 84.42 89.42 94.42 99.42 104.42 109.42 114.42 119.42 54.41 59.41 62.41 64.41 69.41 74.41 79.41 84.41 89.41 94.41 99.41 104.41 109.41 114.41 119.41 134.40 68.24 73.24 78.24 83.24 88.24 93.24 98.24 103.24 108.24 113.24

D Head Diameter (max.) 25.50 25.50 25.50 25.50 25.50 25.50 25.50 25.50 25.50 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 35.00 42.50 42.50 42.50 42.50 42.50 42.50 42.50 42.50 42.50 42.50

E Collar G Collar Flanged Dia. Height (max.) (max.) 26.25 26.25 26.25 26.25 26.25 26.25 26.25 26.25 26.25 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 31.00 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 34.75 43.05 43.05 43.05 43.05 43.05 43.05 43.05 43.05 43.05 43.05

18.49 18.49 18.49 18.49 18.49 18.49 18.49 18.49 18.49 20.90 20.90 20.90 20.90 20.90 20.90 20.90 20.90 20.90 20.90 20.90 20.90 20.90 20.90 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 23.39 28.80 28.80 28.80 28.80 28.80 28.80 28.80 28.80 28.80 28.80

H Collar O D (max.) 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 23.40 23.40 23.40 23.40 23.40 23.40 23.40 23.40 23.40 23.40 23.40 23.40 23.40 23.40 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 25.63 32.10 32.10 32.10 32.10 32.10 32.10 32.10 32.10 32.10 32.10

I Collar I D (ref.)

Maximum Hole Size (mm)

Tensile Strength (lbs.)

Clamp Strength (lbs.)

Shear Strength (lbs.)

Nose Assembly Number

Tool Number

12.29 12.29 12.29 12.29 12.29 12.29 12.29 12.29 12.29 14.70 14.70 14.70 14.70 14.70 14.70 14.70 14.70 14.70 14.70 14.70 14.70 14.70 14.70 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 16.46 20.45 20.45 20.45 20.45 20.45 20.45 20.45 20.45 20.45 20.45

13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0

19,720 19,720 19,720 19,720 19,720 19,720 19,720 19,720 19,720 26,908 26,908 26,908 26,908 26,908 26,908 26,908 26,908 26,908 26,908 26,908 26,908 26,908 26,908 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 57,730 57,730 57,730 57,730 57,730 57,730 57,730 57,730 57,730 57,730

14,610 14,610 14,610 14,610 14,610 14,610 14,610 14,610 14,610 19,780 19,780 19,780 19,780 19,780 19,780 19,780 19,780 19,780 19,780 19,780 19,780 19,780 19,780 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 40,700 40,700 40,700 40,700 40,700 40,700 40,700 40,700 40,700 40,700

15,750 15,750 15,750 15,750 15,750 15,750 15,750 15,750 15,750 21,570 21,570 21,570 21,570 21,570 21,570 21,570 21,570 21,570 21,570 21,570 21,570 21,570 21,570 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 28,320 44,280 44,280 44,280 44,280 44,280 44,280 44,280 44,280 44,280 44,280

99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7414-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1

HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52

C

D

A

B Flanged Head

G I H

E

Inspection Data–FLANGED HEAD Metric (mm) Nominal A (Min) B (Max) C (Min) D (Max) Diameter Pin Pin Swage Flange Pultrusion Pultrusion Length Diameter DT12

10.3

22.3

15.5

?

DT14

12.04

30.1

16.2

?

DT16

13.8

25.8

19.9

?

DT20

17.2

29.2

23.8

?

D B

A

C

Meets metric DIN grade 10.9 Material values. Grade 8.8 available. Contact factory for details. Stainless Steel and Aluminum variations capabilities upon request. Contact factory for details.





Huck-Spin® Metric Series

Huck-Spin® Metric Series

Hex Head A Shank B Underhead Diameter Pin/Part Number Collar Grip Range Length Length (mm) Number (ref.) (max.)

12 12 12 12 12 12 12 12 12 12 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20

MHSF-DT12-10 MHSF-DT12-15 MHSF-DT12-17 MHSF-DT12-20 MHSF-DT12-25 MHSF-DT12-30 MHSF-DT12-35 MHSF-DT12-40 MHSF-DT12-45 MHSF-DT12-50 MHSF-DT16-10 MHSF-DT16-15 MHSF-DT16-17 MHSF-DT16-20 MHSF-DT16-25 MHSF-DT16-30 MHSF-DT16-35 MHSF-DT16-40 MHSF-DT16-45 MHSF-DT16-50 MHSF-DT16-55 MHSF-DT16-60 MHSF-DT16-65 MHSF-DT16-70 MHSF-DT16-80 MHSF-DT20-15 MHSF-DT20-20 MHSF-DT20-25 MHSF-DT20-30 MHSF-DT20-35 MHSF-DT20-40 MHSF-DT20-45 MHSF-DT20-50 MHSF-DT20-55 MHSF-DT20-60

MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R12 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R16 MHSH-R20 MHSH-R20 MHSH-R20 MHSH-R20 MHSH-R20 MHSH-R20 MHSH-R20 MHSH-R20 MHSH-R20 MHSH-R20

4-16 9-21 10-24 14-26 19-31 24-36 29-41 34-46 39-51 44-56 4-16 9-21 10-24 14-26 19-31 24-36 29-41 34-46 39-51 44-56 49-61 54-66 59-71 64-76 74-86 9-21 14-26 19-31 24-36 29-41 34-46 39-51 44-56 49-61 54-66

Meets metric DIN grade 10.9 Material values. Grade 8.8 available. Contact factory for details. Stainless Steel and Aluminum variations capabilities upon request. Contact factory for details.



4.00 9.00 10.00 14.00 19.00 24.00 29.00 34.00 39.00 44.00 4.00 9.00 10.00 14.00 19.00 24.00 29.00 34.00 39.00 44.00 49.00 54.00 59.00 64.00 74.00 9.00 14.00 19.00 24.00 29.00 34.00 39.00 44.00 49.00 54.00

50.10 55.10 58.10 60.10 65.10 70.10 75.10 80.10 85.10 90.10 59.54 64.54 67.54 69.54 74.54 79.54 84.54 89.54 94.54 99.54 104.54 109.54 114.54 119.54 129.54 73.68 78.68 83.68 88.68 93.68 98.68 103.68 108.68 113.68 118.68

C Head Height (max.)

D Head Diameter (max.)

E Collar Flanged Dia. (max.)

12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 15.10 17.70 17.70 17.70 17.70 17.70 17.70 17.70 17.70 17.70 17.70

15.20 15.20 15.20 15.20 15.20 15.20 15.20 15.20 15.20 15.20 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 21.00 32.66 32.66 32.66 32.66 32.66 32.66 32.66 32.66 32.66 32.66

N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

G Collar H Collar Height O D (max.) (max.) 23.48 23.48 23.48 23.48 23.48 23.48 23.48 23.48 23.48 23.48 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 28.98 34.68 34.68 34.68 34.68 34.68 34.68 34.68 34.68 34.68 34.68

19.89 19.89 19.89 19.89 19.89 19.89 19.89 19.89 19.89 19.89 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00 32.00

I Collar I D (ref.)

Maximum Hole Size (mm)

Tensile Strength (lbs.)

Clamp Strength (lbs.)

Shear Strength (lbs.)

Nose Assembly Number

Tool Number

12.88 12.88 12.88 12.88 12.88 12.88 12.88 12.88 12.88 12.88 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 16.80 20.34 20.34 20.34 20.34 20.34 20.34 20.34 20.34 20.34 20.34

13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0

19,720 19,720 19,720 19,720 19,720 19,720 19,720 19,720 19,720 19,720 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 36,650 57,730 57,730 57,730 57,730 57,730 57,730 57,730 57,730 57,730 57,730

14,610 14,610 14,610 14,610 14,610 14,610 14,610 14,610 14,610 14,610 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 40,700 40,700 40,700 40,700 40,700 40,700 40,700 40,700 40,700 40,700

9,850 9,850 9,850 9,850 9,850 9,850 9,850 9,850 9,850 9,850 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450

99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7412-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1 99-7418-1

HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52

C

B

A

D Hex Head

G

E

I

H

Inspection Data–HEX HEAD Metric (mm) Nominal A (Min) B (Max) C (Min) D (Max) Diameter Pin Pin Swage Flange Pultrusion Pultrusion Length Diameter DT12

10.3

22.3

14.0

?

DT16

13.8

25.8

17.7

?

DT20

17.2

29.2

23.1

?

D B

A

C



Huck-Spin® Inch Series

Huck-Spin® Inch Series

Round Flanged Head Diameter Pin/Part Number Collar Grip Range (In.) Number

1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4

HSP8-DT16-4 HSP8-DT16-6 HSP8-DT16-8 HSP8-DT16-10 HSP8-DT16-12 HSP8-DT16-16 HSP8-DT16-20 HSP8-DT16-24 HSP8-DT16-28 HSP8-DT16-32 HSP8-DT16-36 HSP8-DT16-40 HSP8-DT16-44 HSP8-DT16-48 HSP8-DT16-52 HSP8-DT20-4 HSP8-DT20-6 HSP8-DT20-8 HSP8-DT20-10 HSP8-DT20-12 HSP8-DT20-14 HSP8-DT20-16 HSP8-DT20-18 HSP8-DT20-20 HSP8-DT20-22 HSP8-DT20-24 HSP8-DT20-26 HSP8-DT20-28 HSP8-DT20-32 HSP8-DT20-36 HSP8-DT20-40 HSP8-DT20-44 HSP8-DT20-48 HSP8-DT20-52 HSP8-DT20-56 HSP8-DT20-60 HSP8-DT24-4 HSP8-DT24-6 HSP8-DT24-8 HSP8-DT24-12 HSP8-DT24-16 HSP8-DT24-20 HSP8-DT24-24 HSP8-DT24-28 HSP8-DT24-32 HSP8-DT24-36 HSP8-DT24-40 HSP8-DT24-44 HSP8-DT24-48

HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R16 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R20 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24 HSCF-R24

0.125-0.500 0.125-0.625 0.250-0.750 0.375-0.875 0.500-1.000 0.750-1.250 1.000-1.500 1.250-1.750 1.500-2.000 1.750-2.250 2.000-2.500 2.250-2.750 2.500-3.000 2.750-3.250 3.000-3.500 0.125-0.500 0.125-0.625 0.250-0.750 0.375-0.875 0.500-1.000 0.625-1.125 0.750-1.250 0.875-1.375 1.000-1.500 1.125-1.625 1.250-1.750 1.375-1.875 1.500-2.000 1.750-2.250 2.000-2.500 2.250-2.750 2.500-3.000 2.750-3.250 3.000-3.500 3.250-3.750 3.500-4.000 0.125-0.500 0.125-0.625 0.250-0.750 0.500-1.000 0.750-1.250 1.000-1.500 1.250-1.750 1.500-2.000 1.750-2.250 2.000-2.500 2.250-2.750 2.500-3.000 2.750-3.250

A Shank B Underhead Length Length (ref.) (max.) 0.250 0.250 0.250 0.375 0.500 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000 0.250 0.250 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.125 1.250 1.375 1.500 1.750 2.000 2.250 2.500 2.750 3.000 3.250 3.500 0.250 0.250 0.250 0.500 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 2.750

1.715 1.840 1.965 2.090 2.215 2.465 2.715 2.965 3.215 3.465 3.715 3.965 4.215 4.465 4.715 2.005 2.130 2.255 2.380 2.505 2.630 2.755 2.880 3.005 3.130 3.255 3.380 3.505 3.755 4.005 4.255 4.505 4.755 5.005 5.255 5.505 2.290 2.415 2.540 2.790 3.040 3.290 3.540 3.790 4.040 4.290 4.540 4.790 5.040

C Head Height (max.) .397 .397 .397 .397 .397 .397 .397 .397 .397 .397 .397 .397 .397 .397 .397 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .498 .600 .600 .600 .600 .600 .600 .600 .600 .600 .600 .600 .600 .600

D Head E Collar Diameter Flanged Dia. (max.) (max.) 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.070 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.590 1.590 1.590 1.590 1.590 1.590 1.590 1.590 1.590 1.590 1.590 1.590 1.590

1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.085 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600

G Collar Height (max.)

H Collar O D (max.)

I Collar I D (ref.)

Maximum Hole Size (In.)

Tensile Strength (lbs.)

Clamp Strength (lbs.)

Shear Strength (lbs.)

Nose Assembly Number

Tool Number

0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.755 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 0.927 1.112 1.112 1.112 1.112 1.112 1.112 1.112 1.112 1.112 1.112 1.112 1.112 1.112

0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 0.815 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.216 1.216 1.216 1.216 1.216 1.216 1.216 1.216 1.216 1.216 1.216 1.216 1.216

.615 .615 .615 .615 .615 .615 .615 .615 .615 .615 .615 .615 .615 .615 .615 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .775 .780 .780 .780 .780 .780 .780 .780 .780 .780 .780 .780 .780 .780

TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 50,100 50,100 50,100 50,100 50,100 50,100 50,100 50,100 50,100 50,100 50,100 50,100 50,100

15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200

17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850

99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7312-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1

HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS37 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52

C

B

A

D Flanged Head

G I H

E

Inspection Data–FLANGED HEAD Imperial (in.) Nominal A (Min) B (Max) C (Min) D (Max) Diameter Pin Pin Swage Flange Pultrusion Pultrusion Length Diameter DT16

0.430

0.930

0.560

?

DT20

0.540

1.040

0.730

?

DT24

0.640

1.140

0.921

?

D B

A

C

Huck-Spin meets SAE, J429, ASTM A490, and SAE Grade 8 material values. Also available in SAE Grade 2 and 5. Stainless Steel and Aluminum variations capabilities upon request. Contact factory for details.





Huck-Spin® Inch Series

Huck-Spin® Inch Series

Truss Head A Shank B Underhead Diameter Pin/Part Number Collar Grip Range Length Length (In.) Number (ref.) (max.)

C Head Height (max.)



0.499 0.499 0.499 0.499 0.499 0.499 0.499 0.499 0.499 0.499 0.499 0.499 0.499 0.290 0.290 0.290 0.290 0.290 0.290 0.290 0.290 0.290 0.290 0.290 0.290 0.290 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330 0.330

1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4

HST-DT16-6 HST-DT16-8 HST-DT16-12 HST-DT16-16 HST-DT16-20 HST-DT16-24 HST-DT16-28 HST-DT16-32 HST-DT16-36 HST-DT16-40 HST-DT16-44 HST-DT16-48 HST-DT16-52 HST-DT20-6 HST-DT20-8 HST-DT20-12 HST-DT20-16 HST-DT20-20 HST-DT20-24 HST-DT20-28 HST-DT20-32 HST-DT20-36 HST-DT20-40 HST-DT20-44 HST-DT20-48 HST-DT20-52 HST-DT24-6 HST-DT24-8 HST-DT24-12 HST-DT24-16 HST-DT24-20 HST-DT24-24 HST-DT24-28 HST-DT24-32 HST-DT24-36 HST-DT24-40 HST-DT24-44 HST-DT24-48 HST-DT24-52

HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R16 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R20 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24 HSC-R24

0.000-0.500 0.250-0.750 0.500-1.000 0.750-1.250 1.000-1.500 1.250-1.750 1.500-2.000 1.750-2.250 2.000-2.500 2.250-2.750 2.500-3.000 2.750-3.250 3.000-3.500 0.000-0.500 0.250-0.750 0.500-1.000 0.750-1.250 1.000-1.500 1.250-1.750 1.500-2.000 1.750-2.250 2.000-2.500 2.250-2.750 2.500-3.000 2.750-3.250 3.000-3.500 0.000-0.500 0.250-0.750 0.500-1.000 0.750-1.250 1.000-1.500 1.250-1.750 1.500-2.000 1.750-2.250 2.000-2.500 2.250-2.750 2.500-3.000 2.750-3.250 3.000-3.500

0.130 0.250 0.500 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000 0.130 0.250 0.500 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000 0.130 0.250 0.500 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000

1.630 1.880 2.130 2.380 2.630 2.880 3.130 3.380 3.630 3.880 4.130 4.380 4.630 2.060 2.180 2.430 2.680 2.930 3.180 3.430 3.680 3.930 4.180 4.430 4.680 4.930 2.175 2.425 2.675 2.925 3.175 3.425 3.675 3.925 4.175 4.425 4.675 4.925 5.175

D Head E Collar G Collar H Collar Diameter Flanged Dia. Height O D (max.) (max.) (max.) (max.) 1.064 1.064 1.064 1.064 1.064 1.064 1.064 1.064 1.064 1.064 1.064 1.064 1.064 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.330 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600 1.600

TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.750 0.922 0.922 0.922 0.922 0.922 0.922 0.922 0.922 0.922 0.922 0.922 0.922 0.922 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100

0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 1.010 1.010 1.010 1.010 1.010 1.010 1.010 1.010 1.010 1.010 1.010 1.010 1.010 1.213 1.213 1.213 1.213 1.213 1.213 1.213 1.213 1.213 1.213 1.213 1.213 1.213

I Collar I D (ref.)

Maximum Hole Size (In.)

Tensile Strength (lbs.)

Clamp Strength (lbs.)

Shear Strength (lbs.)

Nose Assembly Number

Tool Number

TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 23,400 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 33,900 55,100 55,100 55,100 55,100 55,100 55,100 55,100 55,100 55,100 55,100 55,100 55,100 55,100

15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 15,800 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 26,080 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200 37,200

17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 17,350 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 27,450 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850 39,850

99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7313-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7315-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1 99-7314-1

HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52 HS52

B

A

C D

Truss Head

G I

E

H

Inspection Data–FLANGED HEAD Imperial (in.) Nominal A (Min) B (Max) C (Min) Diameter Pin Pin Swage Pultrusion Pultrusion Length

D (Max) Flange Diameter

DT16

13.76

25.76

0.124

?

DT20

0.520

?

0.782

?

DT24

0.568

?

?

?

D B

A

C

Huck-Spin meets SAE, J429, ASTM A490, and SAE Grade 8 material values. Also available in SAE Grade 2 and 5. Stainless Steel and Aluminum variations capabilities upon request. Contact factory for details.

10

11

Huck-Spin® Tooling

Huck-Spin® Tooling

Installation Tooling

Installation Tooling

The Huck-Spin™ Installation Tool employs a unique spin on, swage, spin off routine to install Huck-Spin fasteners with a secure clamp, but without the typical pinbreak.

Hydraulic power for the tool is provided by the electricpowered HUCK POWERRIG® 918 or 940.

Hydraulic Tools & Nose Assemblies / Inch Series Tool Model

HS7 Series

Hydraulic Tools

HS24 Series HS37 Series

HS52 Series

2624HS

HSSFT-M12

HSSFT-M16

Nose Assembly

1/4"

99-7300















5/16"

99-7301















3/8"

99-7302, 99-7303















1/2"



99-7330

99-7307 99-7312-1

99-7306-1,99-7308-1 99-7309-1, 99-7313-1 99-7550CC

99-7500 99-7500CC









5/8"



99-7331





99-7602





3/4"







99-7314-1 99-7553CC

99-7503 99-7503CC









1"







99-7321, 99-7322





99-7315-1, 99-7316-1 99-7501 99-7317-1, 99-7318-1 99-7501CC 99-7551CC

HSSFT-M16 Swage Forward™ Weight: TBD lbs

Model 2624HS Hydraulic Tool Weight:

14.0 lbs

Length:

7.4"

Length:

."

7.7"

Height:

."

3.4"

Width:

."

Height: Width:

Hydraulic Tools & Nose Assemblies / Metric Series Tool Model

HS24 Series

HS37 Series

Hydraulic Tools

HS52 Series

2624HS

HSSFT-M12

HSSFT-M16

Nose Assembly

12mm

99-7430

99-7412-1

99-7413-1, 99-7560CC

99-7510, 99-7510CC







14mm



99-7414-1, 99-7416-1

99-7415-1, 99-7561CC

99-7511, 99-7511CC



99-7700





16mm





99-7315-1, 99-7316-1 99-7317-1, 99-7318-1 99-7551CC

99-7501, 99-7501CC



99-7602





20mm





99-7418-1, 99-7562CC

99-7512, 99-7512CC



Hydraulic Collar Cutter Nose

HS7

Tool Model

HS24 Series

HS37 Series

Hydraulic Tools

HS52 Series



12

Nose Assembly

12mm





14mm







16mm







20mm





2624HS

HSSFT-M12

HSSFT-M16

HS52

HS7 Hydraulic Tool

HS37 Hydraulic Tool

HS37 RH Hydraulic Tool

HS52 Hydraulic Tool

HS52 RH Hydraulic Tool

Weight:

5.9 lbs

Weight:

30.0 lbs

Weight:

30.0 lbs

Weight:

40.0 lbs

Weight:

40.0 lbs

Length:

8.39"

Length:

10.912"

Length:

15.61"

Length:

11.787"

Length:

16.34"

Height:

8.85"

Height:

7.460"

Height:

7.46"

Height:

11.000"

Height:

11.00"

Width:

1.83"

Width:

3.280"

Width:

3.28"

Width:

4.280"

Width:

4.28"



13

POWERIG®

Huck-Spin® Tooling Huck SpinCutter ®

Installation Tool HUCK offers three basic POWERIG® hydraulic power units for both in-plant and on-site use. Available in a choice of gasoline or electric power, there is a POWERIG® available

to deliver a hydraulic flow rate ranging from 70 cu. inches to 2 gallons per minute.

POWERIG® 940

POWERIG® 918

Specifications

Specifications

Weight: 74.5 lbs. operational 66 lbs. w/o hydraulic fluid

Weight: 780 lbs. operational 585 lbs. w/o hydraulic fluid

Power: electric, 115 or 220 volts, single phase

Power: electric, 220 or 440 volts, 3 phase

Length: 12.5 in. Height: 18 in.

Length: 44 in. Height: 30 in.



Width: 10.5 in.

Width: 25 in.

Flow Rate: 70 cu. in/min. @ 5,000 psi Reservoir Capacity: 1.5 gallons Options: 220V, 60/50 hertz single phase, 250VDC, direct current

POWERIG® P/N



The Model 940 POWERIG® is a portable unit sized for moderate production and repair applications. This unit features rugged construction for durability in the field, and the choice of 115 or 220 Volt AC power. The Model 940 includes a handle for easy transport, simple adjustable hydraulic outputs and quick-connect couplers for connecting installation tool hoses.

DESCRIPTION

964 940

PORTABLE HYDRAULIC POWER SOURCE FOR REPAIR USE ONLY, MANUAL SHIFT FROM PULL TO RETURN FOR USE WITH 2624HS ONLY REQUIRES 110VAC

940-220

PORTABLE HYDRAULIC POWER SOURCE FOR REPAIR & LIGHT PRODUCTION SERVICE REQUIRES 220VAC

940HS

TYPE VI POWERIG CONTROLLER PORTABLE HYDRAULIC POWER SOURCE WITH INTERNAL CONTROLLER FOR REPAIR & LIGHT PRODUCTION SERVICE ADJUSTABLE PRESSURES & NON ADJUSTABLE TIMERS REQUIRES 110VAC & 90 psi AIR

PORTABLE HYDRAULIC POWER SOURCE FOR REPAIR & LIGHT PRODUCTION SERVICE REQUIRES 110VAC

Flow Rate: 2.0 gpm per tool station

The Model 918 POWERIG® is the largest hydraulic unit offered by HUCK. Sized for high production applications the unit can operate up to three tools independently. This electrically powered model also delivers sufficient power to operate the tools up to 100 feet away. A 22-gallon reservoir stores hydraulic fluid, with a filter-strainer in the suction line to assure clean, filtered fluid.

POWERIG® P/N

DESCRIPTION

940-220HS

TYPE VI POWERIG CONTROLLER PORTABLE HYDRAULIC POWER SOURCE WITH INTERNAL CONTROLLER FOR REPAIR & LIGHT PRODUCTION SERVICE ADJUSTABLE PRESSURES & NON ADJUSTABLE TIMERS REQUIRES 110VAC & 90 psi AIR

918 Series

2 TOOL, STATIONARY HYDRAULIC POWER SOURCE FOR HEAVY PRODUCTION SERVICE

918-5 Series

3 TOOL, STATIONARY HYDRAULIC POWER SOURCE FOR HEAVY PRODUCTION SERVICE

N

ow, take the red-hot out of the repair process with the cool — as in room temperature — way to cut through the collars of Huck-Spin® lockbolts. With the new Huck SpinCutter from Alcoa Fastening Systems, you can leave your oxy-acetylene torch in the corner and remove Huck-Spin fasteners with a tool that couldn’t be easier or safer to operate. The SpinCutter splits Huck-Spin collars smoothly and swiftly by hydraulic action. Mastered in minutes, it eliminates the special skills and safety precautions that cutting-torches require. This time-saving, production-quality tool also eliminates the frequent and costly blade replacements you may have experienced with other collar cutters. Forget a dozen or two dozen cuts: the SpinCutter offers the durability to split more than a thousand Huck-Spin collars before needing a new set of blades. What’s more, the Huck SpinCutter Collar Cutting Kit comes with a nose assembly for installing new Huck-Spin fasteners when finishing up a repair job. That’s double the duty — and double the value — from a single tool. So let the torch be … extinguished. The faster, safer, and much, much cooler approach to Huck-Spin collar removal is here. Call your Alcoa Fastening Systems distributor for complete information or go to www.huck. com/cutter.

Huck SpinCutter Kit Contents • Huck 2624HS hydraulic tool and hoses • Huck SpinCutter nose assembly • Huck-Spin installation nose assembly • Compact air-driven power source • Huck POWERIG® 940 is optional at extra cost (tool and noses are available independently for existing POWERIG owners)

Fastener Materials and finishes Material Collar Pin

Collar Finish

Pin Finish

Steel

Low Carbon Steel

Medium Carbon Steel

Zinc Plated Clear Chromate

Zinc Plated Gold Chromate

Stainless

302

305/304

Passivated

Dry Lubricated

Fastener Ordering Information Follow the form below to construct a part number for ordering Huck-Spin fasteners. Refer to the Grip Data chart for grip numbers.

HST (STYLE) - (MATERIAL) (DIAMETER) (GRIP NUMBER) Example: HST-DT16-8 is a Standard Collar, Truss Head, Medium Carbon Steel, 1/2" Diameter, Grip: 1/16" increments

Protruding Head Truss Head 100° Flush Head Flange Head

14

Diameter

Material

Style

6

P

Steel

R

3/16

T

Stainless Steal

U

1/4

8

3/8

12

100 F

15

For the Long Haul™

The Benefits of Huck Fastening Systems Huck fastening systems deliver a number of important benefits, making them the worldwide leader. • Easy to use – consistent accuracy with little operator training required • High productivity – reducing installation time by 25% to 50% • Reduced QC procedures – a visual inspection is sufficient to verify a correct installation

• High clamp performance – typically much higher than with conventional fasteners • Durability – extremely high clamp force retention, with 10% to 20% greater fatigue life than conventional threaded fasteners

Alcoa Fastening Systems Commercial Products: A Global Organization Alcoa Fastening Systems (AFS) maintains company offices in the United States and Canada, with offices in many other countries. Authorized AFS fastener distributors are also Americas Headquarters 8001 Imperial Drive Waco, TX 76712, USA P.O. Box 8117 Waco, TX 76714-8117, USA Tel: 800 388 4825 Fax: 800 798 4825 Indianapolis Distribution 5436 West 78th Street Indianapolis, IN 46268, USA Tel: 800 732 3470 ext 1 Fax: 800 573 2645 Kingston Operations 1 Corporate Drive Kingston, NY 12401, USA Tel: 800 278 4825 Fax: 845 334 7333 Latin America Sales Avenida Parque Lira 79-402 Tacubaya Mexico C P 11850 Tel: 52 55 5515 1776 Fax: 52 55 5277 7564

Mississauga Distribution 6150 Kennedy Road, Unit 10 Mississauga, Ontario L5T-2J4 Canada Tel: 905 564 4825 Fax: 905 564 1963 Stoughton Operations 44 Campanelli Parkway Stoughton, MA 02072, USA Tel: 800 732 3470 ext 2 Fax: 800 644 2177 Waco Operations 8001 Imperial Drive Waco, TX 76712, USA P.O. Box 8117 Waco, TX 76714-8117, USA Tel: 800 388 4825 Fax: 800 798 4825

Shanghai Sales No.1277, Zhongshan Xi Road Hailuo Building, Room 504 Shanghai, 200051, China Tel: 86-21-62700949 Fax: 86-21-62701964

Your Authorized Distributor

Singapore Sales Blk 194 Pandan Loop #07-16 Pantech Industrial Complex 128383, Singapore Tel: 65 67 78 92 33 Fax: 65 67 78 01 51 Telford Operations Unit C, Stafford Park 7 Telford, Shropshire TF3, 3BQ United Kingdom Tel: 44 1952 290011 Fax: 44 1952 290459

International Locations Melbourne Operations 20 Stamford Road Oakleigh, Victoria, 3166 Australia Tel: 61 3 9567 3377 Fax: 61 3 9563 1980

For The Long Haul, The Future of Fastening Technology, The Future of Assembly Technology, The Future of Tooling Technology, and Tools of Productivity are service marks of Alcoa Fastening System. AFS provides technical assistance regarding the use and application of both fasteners and tooling.

B-AFS106 1005-00M

located in many of the world’s industrial centers, where they provide a ready source of AFS fasteners, installation tools, tool parts, and application assistance.

NOTICE: The information contained in this publication is only for general guidance with regard to properties of the products shown and/or the means for selecting such products, and is not intended to create any warranty, express, implied, or statutory; all warranties are contained only in AFS’s written quotations, acknowledgements, and/or purchase orders. It is recommended that the user secure specific, up-to-date data and information regarding each application and/or use of such products.

© 2005 Alcoa Fastening Systems E-mail: [email protected] • www.alcoafasteningsystems.com

One Great ConnectionSM