Copyright 2021 Village Lighting Co. Patents Pending
1. How does Light Stream work? TM
Wireless connection: App/Device to Controller: Bluetooth Controller to Switch(s) and bulbs: 2.4G Wireless
TM
Light Stream uses ordinary E12 Socketed SPT2 or SPT1 wire to power bulbs equipped with wireless transmitters and receivers. The bulbs will receive and relay signals from both the Controllers and paired Switches. Because some functions of the bulbs are directly controlled by interrupting their power supply, it’s imperative that bulbs are connected directly to a controller or switch without any additional hardware on the line.
APP
SWITCH CONTROLLER
BULBS
SWITCH
BULBS BULBS
2. General Installation No more than 200 bulbs may be used on a single switch or controller. If more than 200 bulbs are required for a job, add Switches as needed. NOTE: Switches should not be placed further than 25 feet away from the controller or blocked by any significant architectural structure. Architectural or strong wireless interference could disrupt the communication between the Controller and Switch.
>200 Bulbs
SWITCH
Non-socketed extension cords connecting runs of LS bulbs are permitted as long as there’s no additional hardware added between the conections.