Pliers
Hand Tools 20 Foot Glow Fish Tape pg. 110
Ironworker's Pliers with Comfort Grip pg. 16
Heavy-Duty Wire Stripper/Cutter pg. 31
Multi-Bit Precision Screwdrivers pg. 72 Impact Flip Socket Drivers pg. 79
Jobsite Karbn™ Full Brim Hard Hats pg. 153
Electrical Testing & Installation Tools Construction & Structural Tools
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Introducing Over 250 New Products!
Thermal Imager pg. 271
Battery-Operated Impact Tools pg. 276
1000V Insulated Screwdrivers and Kits pgs. 68, 145
Safety Lamp with Magnet pg. 157
Cable and Wire Management Solutions pgs. 240-241
90° Impact Wrench pg. 278
Cooling Fan for Hard Hats and Safety Helmets pg. 158
Respirators and Reusable Face Masks pg. 159
Impact Punchdown Tool pg. 236 LAN Scout™ Jr. 2 Cable Tester pg. 247
Wide Range Distribution Grip pg. 305
Cordless Utility LED Light pg. 281
Clamp Meters pg. 255-257
Pliers
WRȨQG.OHLQ VQHZLQQRYDWLYHWRROVIRUWKHMRE
Strippers, Cutters, and Crimpers
/RRNIRUWKLVV\PERO
Drivers and Wrenches
Conduit Benders with Angle Setter™ pg. 118 Utility Staple Starter with Staples pg. 104
Magnetic Wire Puller pg. 115
Rechargeable Self-Leveling Green Planar Laser Level pg. 126
Conduit Tools and Measurement
Electrician’s Hammers pg. 102
Tool Kits Safety, PPE and Comfort
Gel Knee Pads pg. 169
60W Portable Solar Panel pg. 183
Bluetooth®* Jobsite Speaker pg. 181 Powerbox 1 pg. 184
Modular Tool Pouch System pg. 201
Jobsite Accessories
Rechargeable Flashlights pgs. 172-173 Headlamps pgs. 157, 175-177
Tool Storage
ScoutTM Pro 3 Tester with PoE pg. 248-249
Bluetooth®* Earbuds pg. 180
Lifting, Pulling, and Structural
*Bluetooth is a registered trademark of Bluetooth Special Interest Group (SIG).
Power Tools and Accessories
Portable Power Stations 500/1500W pgs. 182-183
Test and Measurement
Jobsite Accessories, PPE, Safety Helmets and Visors
Voice/Data/Video
Non-Contact Voltage Testers pg. 264
GFCI Receptical Tester pg. 265
7$%/(2)&217(176
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
HAND TOOLS
JOBSITE
3OLHUV ........................... 09
'ULYHUV :UHQFKHV ... 63
Lineman ............................................ 12-15 Ironworker ...............................................16 Diagonal ................................................. 21 Long-Nose ...................................... 22-26 Slip-Joint Pliers ................................... 26 Pump ....................................................... 27 Specialty ................................................. 28 Plier Handles ......................................... 28
Screwdrivers .................................. 65-77 Multi-Bit Screwdrivers & Bits ... 70-75 Impact & Torque Drivers .................... 78 Nut Drivers ..................................... 79-83 Tap Tool & Awls ................................... 84 Wrenches ........................................ 85-95 Hex Keys ...................................... 96-100 Hammers ................................... 101-103 Utility Stapler .................................... 104
6WULSSHUV&XWWHUV & &ULPSHUV ................ 29 Wire Stripping/Cutting ............... 30-35 Crimping ......................................... 36-37 Cable Cutting/Stripping ............. 38-43 Bolt Cutting ......................................... 44 Sheet Metal (HVAC) .................... 45-47 Duct ....................................................... 48 Knives .............................................. 49-57 Scissors ......................................... 58-60 Hand Saws ..................................... 61-62
,QVXODWHG7RROV 33( 6DIHW\ .......... 139
7RRO6WRUDJH ............ 185
1000V Insulated Tools ........... 140-149
Pouches ...................................... 187-193
Hard Hats .................................. 151-153
Tool Holders .............................. 194-196
Safety Helmets .................................. 154
Tool Belts/Suspenders ........... 196-206
Hard Hat Accessories ............. 155-158
Backpacks ................................ 208-210
Eyewear/Respiration ............... 158-159
Tool Bags ................................... 211-218
Work Wear ................................ 160-161
Zipper Bags ............................... 219-221
Gloves ......................................... 162-166
Storage Racks ......................... 222-223
Chisels & Punches .................. 105-106
Supports .............................................. 167
&RQGXLW3LSH 0HDVXUHPHQW ....... 107
Safety Products ................................. 168
Lineman/Utility Buckets, Bags, & Accessories .............. 224-230
Fish Tapes ................................. 108-111 Fish Rods ................................... 112-114 Wire Pulling .............................. 115-116 Conduit ....................................... 117-118 Pipe ............................................. 119-123 Levels ......................................... 124-129 Tape Measures ......................... 130-131 Distance Measuring ......................... 132
7RRO.LWV ..................... 133
-REVLWH$FFHVVRULHV ... ...169 169 Illumination ................................ 170-178 Coolers ................................................ 179 Magnetic Wristband ......................... 180 Wireless Jobsite Speakers ..... 180-181 Phone Holders ................................... 181 Batteries & Power ................... 182-184
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
3RZHU7RROV $FFHVVRULHV ........................................ 275
Cable Preparation ............................................................................................................. 232 Cable Termination ................................................................................................... 232-235 Punchdown Tools ..................................................................................................... 236-237 Cable Connectors .................................................................................................... 238-239 Cable Management .................................................................................................. 239-241 VDV Kits .................................................................................................................... 242-245 Cable Testing ........................................................................................................... 246-252
Battery-Operated Impact Drills .................................................................................. 276-277
Battery-Operated Lighting ................................................................................................... 281 Holemaking .................................................................................................................... 282-283 Blades ........................................................................................................................................ 283 Drill Bits .......................................................................................................................... 284-288
/LIWLQJ3XOOLQJ 6WUXFWXUDO.................................... 289 Wire Pulling Grips ........................................................................................................ 290-306 Wire Mesh Grips ............................................................................................................ 307-311 Hooks and Rope ...................................................................................................................... 313 Block and Tackle ............................................................................................................ 314-316 Steel & Concrete Construction .................................................................................. 317-320
Power Tools and Accessories Lifting, Pulling, and Structural
Clamp Meter ............................................................................................................. 254-257 Multimeter ................................................................................................................ 258-260 Meter Accessories ................................................................................................... 261-262 Electrical Testers ..................................................................................................... 263-267 Thermometers ......................................................................................................... 268-269 Borescopes ......................................................................................................................... 270 Specialty Testers ..................................................................................................... 271-273 Meter & Tester Cases ...................................................................................................... 274 High Voltage ...................................................................................................................... 274
Battery-Operated Cutters/Crimpers ......................................................................... 279-281
Test and Measurement
7HVW 0HDVXUHPHQW ............................................... 253
Battery-Operated Impact Wrenches .................................................................................. 278
Voice/Data/Video
9RLFH'DWD9LGHR .................................................... 231
Tool Storage
CONSTRUCTION & STRUCTURAL TOOLS
Jobsite Accessories
ELECTRICAL TESTING & INSTALLATION TOOLS
Safety, PPE and Comfort
:$55$17 800-553-4676
Jaw Thickness 0.23" (0.58 cm) 0.35" (0.89 cm) 0.35" (0.89 cm) 0.23" (0.58 cm) 0.24" (0.61 cm) 0.24" (0.61 cm) 0.24" (0.61 cm)
Tapered Nose Mini Jaw
Pointed Nose Standard Jaw
Cutting Knives Semi-Flush Semi-Flush Flush Flush Semi-Flush Semi-Flush Flush
Pointed Nose Narrow Jaw
Handle Color Light Blue Light Blue Light Blue Light Blue Light Blue Light Blue Light Blue
Pointed Nose Extra Narrow Jaw
Handle Finish Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped
Overall Length 4.26" (10.82 cm) 5.1" (12.95 cm) 5.1" (12.95 cm) 4.26" (10.82 cm) 4.26" (10.82 cm) 4.26" (10.82 cm) 4.26" (10.82 cm)
3OLHUV
'LDJRQDO&XWWLQJ3OLHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
Midget Diagonal-Cutting Pliers – Nickel Ribbon Wire Cutters • Designed to cut nickel ribbon wire • Nose tip is only 1/32" (0.8 mm) for precise work in confined areas • Cutting knife tip is 3/16" (5 mm) long for precise cutting • Spring-loaded action for self-opening D230-4C
Jaw Length 0.5" (1.27 cm)
Jaw Width 0.438" (1.11 cm)
Jaw Thickness 0.25" (0.64 cm)
Cutting Knives Semi-Flush
Handle Color Light Blue
Handle Finish Plastic-Dipped
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. D230-4C
Overall Length 4.26" (10.82 cm)
7RRO.LWV 6DIHW\33( DQG&RPIRUW
Precision Flush Cutter • Shears wire up to 16 AWG producing a flat, flush cut • Shear cutting greatly reduces cutting effort and minimizes fly-off • Molded flared grips for greater tool control • Steel return spring for increased comfort during repetitive cutting • Ultra slim profile increases access in confined areas • Heat treated for increased durability
Jaw Length 0.45" (1.14 cm)
Jaw Width 0.26" (0.66 cm)
Jaw Thickness 0.09" (0.23 cm)
Cutting Knives Flush
Handle Color Red
Handle Finish Textured
Overall Length 5.05" (12.83 cm)
7RRO6WRUDJH
Cat. No. D275-5
-REVLWH $FFHVVRULHV
D275-5
9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW
Plastic-Cutting Pliers • Precisely cuts injection mold sprues, gates and other plastic 1/16" hollow-head screw keeps knife-edges from • Adjustable damaging each other (not designed for use on metal) • Spring-loaded for self-opening action D227-7C
Jaw Length 1" (2.54 cm)
Jaw Width 0.969" (2.46 cm)
Jaw Thickness 0.5" (1.27 cm)
Cutting Knives Flush
Handle Color Red
Handle Finish Plastic-Dipped
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. D227-7C
Overall Length 7.688" (19.53 cm)
21
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW 9RLFH'DWD9LGHR
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 3OLHUV
LONG-NOSE
7RRO6WRUDJH
3OLHUV
Side-Cutting Long-Nose Pliers
6WULSSHUV&XWWHUV DQG&ULPSHUV
Hot-riveted joint ensures smooth action and no handle wobble
from Klein's US-made proprietary blend
Induction-hardened cutting knives for long life
'ULYHUVDQG :UHQFKHV
)25*('67((/
Knurled jaws for grabbing and looping wire
&RQGXLW7RROV DQG0HDVXUHPHQW
Slim head design for working in confined areas
Side-Cutting Long-Nose Pliers 7RRO.LWV
Includes core Long-Nose features plus: Heavier design for greater cutting power Knurled jaws for grabbing and looping wire Extended handles provide added reach and greater leverage Curved handles provide greater tool control Glow-in-the-Dark grips are easily spotted in dark or low lit areas (Cat. Nos. D203-8-GLW) Spring-loaded action for self-opening (Cat. Nos. D203-6C and D203-7C)
• • • • • •
D203-6C
6DIHW\33( DQG&RPIRUW D203-8NCR
12 AWG WIRE STRIPPING D203-8N J203-8N
19 & 22 AWG WIRE STRIPPING
D203-8NCR
D203-6H2
Jaw Length
Jaw Width
12 AWG SKINNING HOLE D203-8N-INS
Plastic-Dipped
GLOW-IN-THE-DARK Plastic-Dipped
JOURNEYMAN™ Dual-Material
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
Jaw Thickness
Point Diameter
Knife Length
Handle Color
Handle Finish
Overall Length
0.5" 0.5" 0.5" 0.5" 0.5" 0.5" 0.5" 0.5" 0.5"
0.125" 0.125" 0.125" 0.125" 0.125" 0.125" 0.125" 0.125" 0.125"
(3.2 cm) (3.2 cm) (3.2 cm) (3.2 cm) (3.2 cm) (3.2 cm) (3.2 cm) (3.2 cm) (3.2 cm)
0.625" 0.625" 0.625" 0.625" 0.625" 0.625" 0.625" 0.625" 0.625"
(1.6 cm) (1.6 cm) (1.6 cm) (1.6 cm) (1.6 cm) (1.6 cm) (1.6 cm) (1.6 cm) (1.6 cm)
Orange/Gray Yellow Yellow Glow-in-the-Dark Orange Orange Yellow Yellow/Black Yellow/Black
3-Layer Insulation Plastic-Dipped Plastic-Dipped Plastic-Dipped 2-Layer Insulation 2-Layer Insulation Plastic-Dipped Journeyman™ Dual-Material Journeyman™ Dual-Material
8.77" 8.41" 8.41" 8.46" 8.91" 8.91" 8.42" 8.42" 8.42"
(0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm) (0.24 cm)
0.572" 0.572" 0.572" 0.572" 0.572" 0.572" 0.572" 0.572" 0.572" 0.572" 0.572"
(1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm) (1.45 cm)
Orange/Gray Orange/Gray Yellow Yellow Orange Yellow Yellow Orange Yellow Yellow/Black Yellow/Black
3-Layer Insulation 3-Layer Insulation Plastic-Dipped Plastic-Dipped 2-Layer Insulation Plastic-Dipped Plastic-Dipped 2-Layer Insulation Plastic-Dipped Journeyman™ Dual-Material Journeyman™ Dual-Material
6.9" (17.53 cm) 7.43" (18.87 cm) 6.67" (16.94 cm) 6.67" (16.94 cm) 6.9" (17.53 cm) 7.17" (18.21 cm) 7.17" (18.21 cm) 7.37" (18.72 cm) 6.625" (16.83 cm) 6.75" (17.15 cm) 7.32" (18.59 cm)
7RRO6WRUDJH
Cat. No.
12 AWG WIRE STRIPPING AND CRIMPING
-REVLWH $FFHVVRULHV
HANDLE FINISH
Heavy-Duty Design With Extended Handles
(5.89 cm) (5.89 cm) (5.89 cm) (5.89 cm) (5.89 cm) (5.89 cm) (5.89 cm) (5.89 cm) (5.89 cm)
1.02" 1.02" 1.02" 1.02" 1.02" 1.02" 1.02" 1.02" 1.02"
(2.59 cm) (2.59 cm) (2.59 cm) (2.59 cm) (2.59 cm) (2.59 cm) (2.59 cm) (2.59 cm) (2.59 cm)
(1.3 cm) (1.3 cm) (1.3 cm) (1.3 cm) (1.3 cm) (1.3 cm) (1.3 cm) (1.3 cm) (1.3 cm)
(22.28 cm) (21.36 cm) (21.36 cm) (21.49 cm) (22.63 cm) (22.63 cm) (21.39 cm) (21.39 cm) (21.39 cm)
Standard Design With Curved Handles
0.688" 0.688" 0.688" 0.688" 0.688" 0.688" 0.688" 0.688" 0.688" 0.688" 0.688"
(1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm) (1.8 cm)
0.375" 0.375" 0.375" 0.375" 0.375" 0.375" 0.375" 0.375" 0.375" 0.375" 0.375"
(1 cm) (1 cm) (1 cm) (1 cm) (1 cm) (1 cm) (1 cm) (1 cm) (1 cm) (1 cm) (1 cm)
.094" .094" .094" .094" .094" .094" .094" .094" .094" .094" .094"
www.kleintools.com > 800-553-4676
23
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
1.9" (4.83 cm) 2.42" (6.15 cm) 1.969" (5.0 cm) 1.969" (5.0 cm) 1.969" (5.0 cm) 2.43" (6.17 cm) 2.43" (6.17 cm) 2.43" (6.17 cm) 1.876" (4.77 cm) 1.876" (4.77 cm) 2.438" (6.19 cm)
3RZHU7RROV DQG$FFHVVRULHV
2036EINS 2037EINS D203-6 D203-6C D203-6-INS D203-7 D203-7C D203-7-INS D203-6H2 J203-6 J203-7
7HVWDQG 0HDVXUHPHQW
2.313" 2.313" 2.313" 2.313" 2.313" 2.313" 2.313" 2.313" 2.313"
9RLFH'DWD9LGHR
2038EINS D203-8 D203-8N D203-8-GLW D203-8-INS D203-8N-INS D203-8NCR J203-8 J203-8N
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
/RQJ1RVH3OLHUV
All-Purpose Pliers Includes core Side-Cutting Long-Nose Pliers features plus: Cat. No. J206-8C strips 8-16 AWG solid and 10-18 AWG stranded wire Cat. No. J207-8CR strips 10-18 AWG solid and 12-20 AWG stranded wire and crimps non-insulated connectors, lugs and terminals Knurled jaw for grabbing and looping wire 6-32 and 8-32 screw shearing
• • • •
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
J206-8C
CRIMPING FEATURE J207-8CR
Cat. No. J206-8C J207-8CR
Jaw Length 2.214" (5.62 cm) 2.214" (5.62 cm)
Jaw Width 1" (2.54 cm) 1" (2.54 cm)
Jaw Thickness 0.5" (1.27 cm) 0.5" (1.27 cm)
Point Diameter 0.15" (0.38 cm) 0.15" (0.38 cm)
Knife Length 0.5" (1.27 cm) 0.5" (1.27 cm)
Handle Color Yellow/Black Yellow/Black
Handle Finish Journeyman™ Dual-Material Journeyman™ Dual-Material
Overall Length 8.3" (21.08 cm) 8.48" (21.54 cm)
Long-Nose Pliers • Knurled jaws for grabbing and looping wire • Curved handles provide greater tool control • Spring-loaded action for self-opening (Cat. No. D301-6C) D301-6
Cat. No. D301-6 D301-6C
Jaw Length 1.895" (4.81 cm) 1.895" (4.81 cm)
Jaw Width 0.688" (1.75 cm) 0.688" (1.75 cm)
Jaw Thickness 0.375" (0.95 cm) 0.375" (0.95 cm)
Point Diameter 0.094" (0.24 cm) 0.094" (0.24 cm)
Handle Color Yellow Yellow
Handle Finish Plastic-Dipped Plastic-Dipped
Overall Length 6.67" (16.94 cm) 6.67" (16.94 cm)
Slim Long-Nose Pliers • Cat. No. D307-51/2C has a longer nose and handles for deeper reach into work • Lightweight, slim-nose pliers for precision miniature assembly work • Curved handles provide greater tool control • Spring-loaded for self-opening action D307-5 1/2C
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
D322-4 1/2C
Cat. No. D307-51/2C D321-41/2C D322-41/2C D327-51/2C
24
Jaw Length 1.709" (4.34 cm) 1.063" (2.70 cm) 1.063" (2.70 cm) 1.688" (4.29 cm)
Jaw Width 0.5" (1.27 cm) 0.44" (1.12 cm) 0.44" (1.12 cm) 0.5" (1.27 cm)
www.kleintools.com > 800-553-4676
Jaw Thickness 0.313" (0.80 cm) 0.027" (0.69 cm) 0.027" (0.69 cm) 0.313" (0.80 cm)
Point Diameter 0.063" (0.16 cm) 0.04" (0.10 cm) 0.04" (0.10 cm) 0.06" (0.15 cm)
Handle Color Yellow Light Blue Light Blue Dark Blue
Handle Finish Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped
Overall Length 5.67" (14.40 cm) 4.82" (12.24 cm) 4.82" (12.24 cm) 5.625" (14.3 cm)
3OLHUV
/RQJ1RVH3OLHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV D335-51/2C
Jaw Length 1.709" (4.34 cm) 1.709" (4.34 cm)
Jaw Width 0.51" (1.30 cm) 0.51" (1.30 cm)
Jaw Thickness 0.313" (0.80 cm) 0.313" (0.80 cm)
Point Diameter 0.0625" (0.16 cm) 0.0625" (0.16 cm)
Handle Color Yellow Light Blue
Handle Finish Plastic-Dipped Plastic-Dipped
Overall Length 5.67" (14.40 cm) 5.67" (14.40 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. D318-51/2C D335-51/2C
'ULYHUVDQG :UHQFKHV
Long Needle-Nose Pliers • Designed for accurate work in hard-to-reach areas • Knurled jaws for grabbing and looping wire • Spring-loaded for self-opening action • Curved handles provide greater tool control • Extra-slim hinge for extremely close quarter work (Cat. No. D355-51/2C)
Telecom Long-Nose Pliers 7RRO.LWV 71980
Cat. No. 71980
Jaw Length 1.875" (4.8 cm)
Jaw Width 0.688" (1.8 cm)
Jaw Thickness 0.375" (1 cm)
Point Diameter 0.09" (0.24 cm)
Knife Length 0.5" (1.3 cm)
Handle Color Yellow
Handle Finish Plastic-Dipped
6DIHW\33( DQG&RPIRUW
Long-Nose Telephone Work Pliers – Type L1 • Knurled jaw tips for greater gripping power • Induction-hardened side-cutting knives for long life • Convenient 0.030" stripping hole • Curved handles provide greater tool control Overall Length 6.625" (16.8 cm)
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
Long-Nose Telephone Work Pliers – Stripping • Cleanly strips 22 to 24 AWG wire • Convenient insulation crushing slot • Curved handles provide greater tool control
Cat. No. D2291
Jaw Length 1.25" (3.2 cm)
Jaw Width 0.688" (1.8 cm)
Jaw Thickness 0.375" (1 cm)
Point Diameter 0.09" (0.24 cm)
Handle Color Yellow
Handle Finish Plastic-Dipped
Overall Length 6" (15.2 cm)
7HVWDQG 0HDVXUHPHQW D302-6
Jaw Length 1.56" (3.96 cm)
Jaw Width 0.688" (1.75 cm)
Jaw Thickness 0.375" (0.95 cm)
Point Diameter 0.094" (0.24 cm)
Handle Color Yellow
Handle Finish Plastic-Dipped
Overall Length 6.109" (15.52 cm)
25
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
Curved Long-Nose Pliers • 70° bent nose for maximum work visibility in confined areas • Knurled jaws for grabbing and looping wire • Curved handles provide greater tool control Cat. No. D302-6
9RLFH'DWD9LGHR
D2291
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW
Midget Curved Chain-Nose Pliers • 60° bent nose for maximum work visibility in confined areas • Easily bends and forms fine wire • Polished inside jaws and radiused jaw edges prevent nicking wire • Spring-loaded for self-opening action • Curved handles provide greater tool control D320-4 1/2C
Cat. No. D320-41/2C
Jaw Length 1" (2.5 cm)
-REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
Jaw Thickness 0.25" (0.6 cm)
Point Diameter 0.05" (0.13 cm)
Handle Color Light Blue
Handle Finish Plastic-Dipped
Overall Length 4.75" (12.1 cm)
®
UR IDC
UG IDC
VDV826-605
Cat. No. VDV026-049 D234-6 D234-6C
VDV026-049
UY IDC VDV826-604
Jaw Length 2" (5.08 cm) 1.085" (2.76 cm) 1.085" (2.76 cm)
Jaw Width 0.5" (1.27 cm) 0.688" (1.75 cm) 0.688" (1.75 cm)
D234-6
Jaw Thickness 0.36" (0.91 cm) 0.375" (0.95 cm) 0.375" (0.95 cm)
Point Diameter 0.125" (0.32 cm) — —
Knife Length 0.44" (1.12 cm) 0.6" (1.52 cm) 0.6" (1.52 cm)
Handle Color Yellow Yellow Yellow
Handle Finish Plastic-Dipped Plastic-Dipped Plastic-Dipped
Overall Length 6.7" (17.02 cm) 5.86" (14.88 cm) 5.86" (14.88 cm)
Slip-Joint Pliers Slip-Joint Pliers • Shear-type cutter for precision wire cutting • Two versatile jaw positions • Serrated jaws provide sure-gripping power • Nickel-chrome plated for long life D511-6
Cat. No. D511-6 D511-8 D511-10
Jaw Length 1.188" (3 cm) 1.375" (3.5 cm) 1.75" (4.5 cm)
Jaw Width 1.188" (3 cm) 1.25" (3.2 cm) 1.375" (3.5 cm)
Jaw Thickness 3/8" (1 cm) 7/16" (1.1 cm) 15/32" (1.2 cm)
Handle Color Blue Blue Blue
Handle Finish Plastic-Dipped Plastic-Dipped Plastic-Dipped
Overall Length 6.563" (16.7 cm) 8.063" (20.5 cm) 9.875" (25.18 cm)
Slip-Joint Pliers - Hose Clamp • Quickly installs and removes spring-tension hose clamps • Grips with either end or side of jaws for work in confined areas • Nickel-chrome plated for long life Cat. No. D514-8
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Jaw Width 0.406" (1 cm)
Connector Crimping Pliers • Crimps and seats UR/UY/UG insulation displacement connectors (IDC) - Scotchlok type connectors • Curved handles for greater control • Hot-riveted joint ensures smooth action and no handle wobble • Induction-hardened cutting surface for long life • Cat. No. VDV026-049 cleanly strips 23-24 AWG wire and has grooved jaws for wire wrapping, looping and twisting
6DIHW\33( DQG&RPIRUW
7RRO.LWV
/RQJ1RVH3OLHUV
26
Jaw Length 1.375" (3.5 cm)
Jaw Width 1.25" (3.2 cm)
www.kleintools.com > 800-553-4676
D514-8
Jaw Thickness 7/16" (1.1 cm)
Handle Color Blue
Handle Finish Plastic-Dipped
Overall Length 8.063” (20.5 cm)
6WULSSHUV&XWWHUV DQG&ULPSHUV
PUMP
PLIERS
3OLHUV
'ULYHUVDQG :UHQFKHV
D504-10
&RQGXLW7RROV DQG0HDVXUHPHQW
Klaw™ Pump Pliers narrow design for easy • Compact, work in small or hard to reach spaces surfaces with specially hardened • Gripping teeth for reduced wear and positive gripping • Extended grips for added comfort Quick-Adjust Pump Pliers: Push button and quick • ratchet feature allows for fast and easy adjustment to any position. (Cat. Nos. D504-10B and D504-12B)
7RRO.LWV D504-10B
Jaw Capacity
Handle Color
Handle Finish
Overall Length
2.125" (5.4 cm) 2.75" (7 cm)
Yellow Yellow
Plastic-Dipped Plastic-Dipped
10.24" (26.01 cm) 12.6" (32.00 cm)
1.375" (3.5 cm) 2.125" (5.4 cm) 2.75" (7 cm)
Yellow Yellow Yellow
Plastic-Dipped Plastic-Dipped Plastic-Dipped
7.13" (18.11 cm) 9.72" (24.69 cm) 11.81" (30.00 cm)
6DIHW\33( DQG&RPIRUW
Cat. No. Quick-Adjust KlawTM Pump Pliers
D504-10B D504-12B Classic KlawTM Pump Pliers
D502-6
SPLIT TETHER RING D502-6TT D502-10TT D502-12TT Plastic-Dipped
JOURNEYMAN™ Dual-Material
Handle Color Orange/Gray Yellow Yellow Yellow Yellow Orange Yellow Yellow Yellow Yellow/Black
Handle Finish 3-Layer Insulation Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped 2-Layer Insulation Plastic-Dipped Plastic-Dipped Plastic-Dipped Journeyman™ Dual-Material
Overall Length 10.29" (26.14 cm) 6.53" (16.59 cm) 8" (20.32 cm) 10.02" (25.45 cm) 11.25" (28.58 cm) 10.3" (26.16 cm) 12.19" (30.96 cm) 13" (33.02 cm) 16.68" (42.37 cm) 10.25" (26.04 cm)
27
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
Jaw Capacity 1.75" (4.5 cm) 0.875" (2.2 cm) 0.875" (2.2 cm) 1.75" (4.5 cm) 1.75" (4.5 cm) 1.75" (4.5 cm) 2.375" (6 cm) 2.375" (6 cm) 4.25" (10.8 cm) 1.75" (4.5 cm)
EINS INSULATED 3-Layer Protection
7HVWDQG 0HDVXUHPHQW
Cat. No. 50210EINS D502-6 D502-6TT D502-10 D502-10TT D502-10-INS D502-12 D502-12TT D502-16 J502-10
INS INSULATED 2-Layer Protection
9RLFH'DWD9LGHR
HANDLE FINISH
7RRO6WRUDJH
Pump Pliers • Secure tongue and groove design for non-slip grip - even with heavy pressure • Wide range of versatile jaw positions • Quick adjust rivet allows one handed, fast and easy adjustment of plier jaws • TT pliers feature split tether ring for securing tool when working at height
-REVLWH $FFHVVRULHV
D504-7 D504-10 D504-12
SPECIALTY
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
End-Cutting Pliers • Wide throat clearance for clean, even cutting of wire or nails at close range design provides greater cutting • High-leverage power at the knives than other plier designs • Extended handles for longer reach and increased leverage D232-8
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
Cat. No. D232-8
7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
Jaw Width 1.76" (4.47 cm)
Jaw Thickness 0.615" (1.56 cm)
Knife Length 1.19" (3.02 cm)
Handle Color Red
Handle Finish Plastic-Dipped
Overall Length 8.51" (21.62 cm)
Conduit Locknut and Reaming Pliers • Tightens 1/2" (13 mm) and 3/4" (19 mm) EMT or 1/2" (13 mm) rigid locknuts • Fits liquid tight fittings and caps • Reams and deburrs both inside and outside of conduit • Knurled jaws at nose tip pull wire or fish tape • Machined nose fits snugly into locknut wings D333-8
Cat. No. D333-8
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Jaw Length 0.421" (1.07 cm)
Jaw Length 1.625" (4.1 cm)
Jaw Width 0.938" (2.4 cm)
Jaw Thickness 0.5" (1.3 cm)
Point Diameter 0.19" x 0.36" (0.48 cm x 0.91 cm)
Handle Color Yellow
Handle Finish Plastic-Dipped
Overall Length 7.75" (19.7 cm)
Pliers Handles Replacement Klein-Koat™ Pliers Handles • Plastic material for slip-resistant grip and comfort Cat. No. 60 70 89
Size to Fit Pliers 6" (15.2 cm) Long 7" (17.8 cm) Long 8" to 9" (20.3 to 22.9 cm) Long
Color Red Red Red
Comfort Grip Kit for Slim-Head Ironworker’s Pliers, 2-Pack Ironworker’s plier grip provides additional • cushioning for repeated hardwire cutting the straight handle of Klein’s Slim-Head • Fits Ironworker’s Pliers (Cat. No. 201-7CST) • Heat shrink band keeps grip in place • Includes two grips and two heat shrink bands Cat. No. M200ST • Pliers not included 28
www.kleintools.com > 800-553-4676
70
Description Ironworker’s Plier Comfort Grip
Qty 2
Fits Cat. No. 2017CST
Color Black
M200ST
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
%ROW&XWWLQJ 6KHHW0HWDO+9$& DQG'XFW .QLYHV +DQG6DZV
3RZHU7RROV DQG$FFHVVRULHV
6FLVVRUV
7HVWDQG 0HDVXUHPHQW
Manufactured with the needs of the professional tool user in mind, Klein strippers, cutters, and crimpers are designed to get jobs done with precision and quality.
&DEOH&XWWLQJ6WULSSLQJ
9RLFH'DWD9LGHR
CUTTERS, AND CRIMPERS
&ULPSLQJ
7RRO6WRUDJH
:LUH6WULSSLQJ&XWWLQJ
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
30
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 3OLHUV
WIRE STRIPPING
3RZHU7RROV DQG$FFHVVRULHV
3OLHUV
Heavy-Duty Wire Strippers
6WULSSHUV&XWWHUV DQG&ULPSHUV
Induction hardened cutting knives for longer cut life
Precision ground stripping holes
'ULYHUVDQG :UHQFKHV
4x Stronger
6-32 and 8-32 screw shearing holes
&RQGXLW7RROV DQG0HDVXUHPHQW
than traditional Klein wire strippers
Hot-riveted joint ensures smooth action and no handle wobble
)25*('67((/
from Klein's US-made proprietary blend
6DIHW\33( DQG&RPIRUW
Heavy-Duty Wire Stri
Twists up to
Includes core Wire Strippers featur The durability of a plier with the sh Twist up to three wires at a time Shear-cutting knives (Cat. No. K12 and larger cable such as Romex® Cat. No. K12035 DOES NOT cut st Cat. No. K12065CR crimps non-in for 10-20 AWG stranded wire
3 Wires
-REVLWH $FFHVVRULHV
• • • • •
7RRO.LWV
Knurled jaw for twisting, grabbing and looping wire
7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW
Strips and Cuts Solid AWG Stranded AWG 8-18 10-20 8-18 10-20
Crimps Stranded AWG — 10-20
Screw Shearing 6-32, 8-32 6-32, 8-32
Handle Color Blue/Gray Blue/White
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. K12035 K12065CR
comfort grip handles for reduced hand fatigue Overall Length 8.41" (21.4 cm) 8" (20.3 cm)
Romex® is a registered trademark of Southwire Company.
31
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
Wire Strippers/Cutters Coil spring provides fast self-opening action
'ULYHUVDQG :UHQFKHV
Wire looping and bending holes
&RQGXLW7RROV DQG0HDVXUHPHQW
Strong gripping serrated nose for easy bending, shaping, and pulling of wire
Precision ground stripping holes
Precision, shear-type cutting blades for easier cutting
Includes core Wire Strippers/Cutters features plus: Easy-to-read markings Precision shear-type cutting blades for easier cutting Narrow nose fits into tight places Double dipped Klein Kurve™ comfort grips Glow-in-the-Dark grips to easily locate your tool in dark or low lit areas (Cat. No. 11055GLW)
• • • • •
HANDLE FINISH
GLOW-IN-THE-DARK Double-Dipped
9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Screw shearing holes
Wire Strippers/Cutters
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
Handy closure lock for convenient storage
Cat. No. 11053 11054EINS K11095 11055 11055GLW 11055-INS 11057 K1412 K1412CAN
Solid AWG — 8-16 8-18 10-18 10-18 10-18 20-30 12-14 12-14
INS INSULATED 2-Layer Protection
K11095
EINS INSULATED 3-Layer Protection
Strips and Cuts Stranded AWG NM-B Cable 6-12 — 10-18 — 10-20 — 12-20 — 12-20 — 12-20 — 22-32 — 14-16 12/2, 14/2 14-16 —
WARNING: Do NOT use for cutting steel wire or bolts
32
www.kleintools.com > 800-553-4676
comfort grip handles for reduced hand fatigue
NMD-90 — — — — — — — — 12/2, 14/2
Screw Shearing 6-32, 8-32 6-32, 8-32 6-32, 8-32 6-32, 8-32 6-32, 8-32 6-32, 8-32 6-32, 8-32 6-32, 8-32 6-32, 8-32
Handle Color Blue/Red Orange/Gray Blue/White Blue/Yellow Glow-in-the-Dark Orange Blue/Red Yellow/White Yellow/White
Handle Finish Double-Dipped 3-Layer Insulation Comfort Grip Double-Dipped Double-Dipped 2-Layer Insulation Double-Dipped Double-Dipped Double-Dipped
Overall Length 7.5" (19.1 cm) 7.7" (19.6 cm) 7.25" (18.4 cm) 7.4" (18.8 cm) 7.4" (18.8 cm) 7.7" (19.6 cm) 7.5" (19.1 cm) 8" (20.3 cm) 8" (20.3 cm)
3OLHUV
:LUH6WULSSHUV&XWWHUVDQG&ULPSHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV 1019
'ULYHUVDQG :UHQFKHV
Wire Strippers/Cutters/Crimpers • Cuts and strips solid and stranded wire • Crimps insulated and non-insulated connectors • Cat. No. 1019 also crimps B-connectors and insulated displacement connectors (IDC) • Tip designed to grab, pull and bend the smallest of wires • Reinforced head reduces flex • Optimized for ideal leverage when stripping and crimping • Precision shear-type cutting blades for easier cutting • Double dipped Klein Kurve comfort grips • Do not use for cutting steel wire or bolts • Patent US D827,403 ™
Strips and Cuts Solid AWG Stranded AWG 10-20 12-22 10-26 12-28
Screw Shearing 6-32, 8-32 6-32, 8-32
B-Connectors
Crimping Capacity 10-22 AWG Insulated and Non-insulated Terminals 10-22 AWG Insulated and Non-insulated Terminals; B-Connectors; Scotchlok® IDC Connectors
UR IDC VDV826-605
Handle Color Gray/Yellow Gray/Red
UG IDC
Handle Finish Double-Dipped Double-Dipped
UY IDC VDV826-604
Overall Length 7.75" (19.7 cm) 7.75" (19.7 cm)
7RRO.LWV
Cat. No. 1009 1019
Non-Insulated Connectors
&RQGXLW7RROV DQG0HDVXUHPHQW
Insulated Connectors
Scotchlok® is a registered trademark of 3M Corporation.
6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
Standard Wire Strippers/Cutters • Cuts, strips, loops solid and stranded wire • Spring-loaded action for self-opening • Easy-to-read wire gauge markings on both sides for stripping in either direction • Hardened steel with precision ground stripping holes • Black-oxide finish resists corrosion • Color-coded, textured handles provide a firm, comfortable grip handles • Shear-type cutting blades for clean cuts. • Cat. No. 11048 strips two wires in a single motion • Cat. Nos. 1011 and 1011M strip six standard wire sizes without nicking wire • Do not use for cutting steel wire or screws
HANDLE FINISH
11048 Textured
INS INSULATED 2-Layer Protection
9RLFH'DWD9LGHR
DUAL-WIRE STRIPPER
7RRO6WRUDJH
11045
Strips and Cuts Stranded AWG — — 16-26 — — 8-16 8-16 12-22 0.15-4.0 mm²
Handle Color Yellow Orange Red Yellow Yellow Red Orange Blue Blue
Handle Finish Textured 2-Layer Insulation Textured Textured Textured Textured 2-Layer Insulation Textured Textured
Overall Length 6.25" (15.9 cm) 7" (17.8 cm) 6.25" (15.9 cm) 6.25" (15.9 cm) 6.25" (15.9 cm) 6.25" (15.9 cm) 7" (17.8 cm) 6.125" (15.6 cm) 6.125" (15.6 cm)
33
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
Solid AWG 10-18 10-18 — 22-30 10-14 — — 10-20 —
7HVWDQG 0HDVXUHPHQW
Cat. No. 11045 11045-INS 11046 11047 11048 11049 11049-INS 1011 1011M
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
:LUH6WULSSHUV&XWWHUV Adjustable Wire Stripper/Cutter • Cuts and strips solid and stranded wire • Handy, light, compact tool for stripping insulation • Adjustable slide stop with set screw for repeated stripping work • Convenient hole for looping or bending wire • Black-oxide finish with plastic-dipped handles
Cat. No. 1004
Strips and Cuts Solid AWG Stranded AWG 12-26 14-28
Hold-Open Spring Yes
Handle Color Yellow
1004
Overall Length 5" (12.7 cm)
Self-Adjusting Wire Stripper/Cutter head adjusts to strip 10-20 AWG Solid, • Stripping 12-22 Stranded and 12/2 and 14/2 Romex wire • Adjustable stopper to control the length of the core strip • Convenient wire cutter in handle • Tensioning thumb wheel allows for precise stripping of smaller gauge wires • Grooved grips are designed for added comfort
6DIHW\33( DQG&RPIRUW
™
Cat. No. 11061
Handle Color
Overall Length
Blue/Black
8.25" (21 cm)
®
Romex is a registered trademark of Southwire Company.
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
11061
Strips and Cuts Solid AWG Stranded AWG Romex® Hold-Open Spring 10-20 12-22 12/2, 14/2 No
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
™
Adjustable Wire Stripper/Cutter • Cuts and strips up to 22 AWG wire with ease • Compound action wire stripping: grip and strip via single action squeezing motion • Precision machined stripping holes easily remove jacket insulation without damaging the wire • Removes up to 1" (2.4 cm) in length of the insulation layer (jacket layer) in a single step • Tension loaded wire-grip gently holds the cable in place while retaining the cable geometry • Additional cutting blades available
Cat. No. 11063W
Strips and Cuts Solid AWG Stranded AWG 8-20 10-22
Hold-Open Spring Yes
Handle Color Blue/Black
Overall Length 6.594" (16.8 cm)
Cat. No. VDV110-046 11073 11074
RG6 Coaxial Cable 8-22 AWG 16-26 AWG
Wire Stop/Gauge
11081
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Application
Replacement Blades
34
www.kleintools.com > 800-553-4676
Adjustable Wire Stop/Gauge
11063W
3OLHUV
0XOWL3XUSRVH7RROV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Solid AWG 8-22
Strips and Cuts Stranded AWG 10-26
Screw Shearing 4-40, 6-32, 8-32, 10-24, 10-32
Crimping Capacity 10-22 AWG Insulated Terminals
Handle Color Red
Overall Length 7.75" (19.7 cm)
Solid AWG 8-22
Strips and Cuts Stranded AWG 10-26
1001
6DIHW\33( DQG&RPIRUW
Cat. No. 1001
7RRO.LWV
Multi-Purpose Electrician’s Tool • Cuts and strips 8-22 AWG Solid and 10-26 AWG Stranded wire • Crimps 10-22 AWG insulated and non-insulated terminals • Two wire cutters double the utility of this tool • Cleanly shears bolts • Pivot nut adjusts tension • Wire-looping holes near tip
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 1000
1000
'ULYHUVDQG :UHQFKHV
Multi-Purpose 6-in-1 Tool • Easily cuts and strips 8-22 AWG Solid and 10-26 AWG Stranded wire • Crimps 10-22 AWG insulated terminals • Cleanly shears bolts • Gauges wire sizes • Measures stud sizes
Screw Shearing 4-40, 6-32, 8-32, 10-24, 10-32
Crimping Capacity 10-22 AWG Insulated, Non-Insulated Terminals
Handle Color Red
Overall Length 8.5" (21.6 cm)
-REVLWH $FFHVVRULHV
Solid AWG 10-20
Strips and Cuts Stranded AWG 12-22
1010
Screw Shearing Crimping Capacity 4-40, 5-40, 6-32, 8-32, 10-32, 10-24 10-22 AWG Insulated, Non-Insulated Terminals, 7-8 mm Ignition Terminals
Handle Color Blue
Overall Length 8.25" (20.96 cm)
9RLFH'DWD9LGHR
Cat. No. 1010
7RRO6WRUDJH
Multi-Purpose Long-Nose Tool • Easily cuts and strips 10-20 AWG Solid and 12-22 Stranded wire • Crimps 10-22 AWG insulated and non-insulated terminals and 7-8 mm ignition terminals • Cleanly shears bolts • Cutters and strippers are in front of the pivot for maximum ease-of-use in reaching into tight places • Narrow, serrated pliers nose to pull, loop, and bend wire
7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
35
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
CRIMPING
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Crimper/Stripper/Cutter • Includes a dedicated crimper with a wire stripper and two cutters • Specially hardened wire cutter in the nose • Shear cutter below the rivet cuts copper wire • Forged steel for added durability • Textured grips for enhanced dexterity and integrated hang holes 2005N
Cat. No. 2005N
Strips and Cuts Crimps Stranded AWG Capacity 10-18 10-22 AWG Insulated and Non-Insulated Terminals
Handle Color Red
Overall Length 9" (23 cm)
Crimpers/Cutters • Cut and crimp 10-22 AWG wire • Tapered nose design for working in confined areas dies marked for insulated and non-insulated • Crimping solderless terminals and connectors • Specially hardened wire cutter in nose • Hot-riveted joint for smooth action and no handle wobble
1005
Cat. No. 1005 1005-INS J1005
Cuts and Crimps 10-22 AWG Insulated and Non-Insulated Terminals 10-22 AWG Insulated and Non-Insulated Terminals 10-22 AWG Insulated and Non-Insulated Terminals
Handle Color Red Orange Red/Black
1006
10-22 AWG Non-Insulated Terminals
Black
36
www.kleintools.com > 800-553-4676
Handle Finish Plastic-Dipped 2-Layer Insulation Journeyman™ y Dual-Material Plastic-Dipped
Overall Length 9.6" (24.4 cm) 10" (25.4 cm) 9.8" (24.9 cm) 9.6" (24.4 cm)
HANDLE FINISH
Plastic-Dipped
JOURNEYMAN™ Dual-Material
INS INSULATED 2-Layer Protection
3OLHUV
&ULPSHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Front Cavity RED 22-16 AWG Insulated Terminals
Crimps Mid Cavity BLUE 16-14 AWG Insulated terminals
Rear Cavity YELLOW 12-10 AWG Insulated terminals
Handle Color Red/Black
Handle Finish Dual-Material
Overall Length 9" (22.9 cm)
7RRO.LWV
Ratcheting Crimpers – Insulated Terminals No. T1715 full cycle ratcheting crimper crimps insulated • Cat. terminals in wire sizes 22-16 (front cavity), 16-14 (middle cavity),
• •
and 12-10 (rear cavity) Cat. No. T1710 compound-action tool crimps 10-22 AWG insulated terminals to meet or exceed MIL-SPEC pull-out tests and features a special locator to quickly position terminal to double crimp Built-in ratchet with safety release assures uniform crimps every time Compound lever-action of narrow span handles puts more crimping power into each squeeze Cable Size 22-16 AWG, 16-14 AWG, 12-10 AWG 10-22 AWG
Handle Finish Plastic-Dipped Plastic-Dipped
-REVLWH $FFHVVRULHV
Cat. No. T1715 T1710
T1715
6DIHW\33( DQG&RPIRUW
•
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 3005CR
3005CR
'ULYHUVDQG :UHQFKHV
Ratcheting Crimpers – Insulated Terminals • Crimps insulated terminals onto 10-22 AWG stranded copper wire compound action design puts more crimping power • Adjustable into each squeeze • Three crimping cavities in one tool • Built-in ratchet ensures full-cycle crimping for a uniform crimp every time • Unique cavity design provides consistent crimp from either side of the tool • Dial adjusts the amount of force applied to the crimp • Dual-material molded grips provide added comfort
Overall Length 9" (22.9 cm) 9" (22.9 cm) T1710
7RRO6WRUDJH
Crimps #6-4/0 AWG Battery Lugs and Terminals
Handle Color Red
Handle Finish Molded Grips
7HVWDQG 0HDVXUHPHQW
Cat. No. 2006
9RLFH'DWD9LGHR
Large Crimp Tool – Compound-Action • Ultra-comfortable hand grips for easy use • All-in-one, integral crimp nest. No removable parts or rotating dies handles and compound-action mechanism for superior • High-leverage mechanical advantage • Adjustment screw allows user to control crimp depth
Overall Length 19.5" (49.5 cm)
37
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
2006
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW 9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV 7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 3OLHUV
CUTTING
6DIHW\33( DQG&RPIRUW
3OLHUV
Cable Cutters 6WULSSHUV&XWWHUV DQG&ULPSHUV
Hot-riveted joint ensures smooth action and no handle wobble
from Klein's US-made proprietary blend
&RQGXLW7RROV DQG0HDVXUHPHQW
Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges
Through-hardened (not case-hardened) for longer-lasting cutting surfaces
'ULYHUVDQG :UHQFKHV
)25*('67((/
7RRO.LWV
High-Leverage Cable Cutters Includes core Cable Cutter features plus: High-leverage design for exceptional cutting capability Cut aluminum, copper and communications cable Cable-gripping shear-type jaws require 30% less force needed to cut as compared to Klein's 63050 model The compact, yet powerful, 63215 cutter cuts and removes aluminum metal clad (MC) cable jacket
6DIHW\33( DQG&RPIRUW
• • • •
-REVLWH $FFHVVRULHV
63215
63225
7RRO6WRUDJH
Cable Cutters
J63225N
HANDLE FINISH
• • • •
Plastic-Dipped
JOURNEYMAN™ Dual-Material
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
Cutting Capacity 4/0 Aluminum, 2/0 Soft Copper, 100-Pair 24 AWG Communications Cable Up to 1/0 AWG Aluminum and Copper Cutting Capacity 4/0 Aluminum, 2/0 Soft Copper, 100-Pair 24 AWG Communications Cable
Handle Finish Plastic-Dipped JourneymanTM Dual-Material Plastic-Dipped
Overall Length 9.07" (23 cm) 9.3" (24 cm) 6.6" (16.7 cm)
Handle Color Red Orange/Black Orange Red/Black
Handle Finish Plastic-Dipped 3-Layer Insulation 2-Layer Insulation JourneymanTM Dual-Material
Overall Length 9.39" (23.9 cm) 9.625" (24.5 cm) 9.625" (24.5 cm) 9.563" (24.3 cm)
www.kleintools.com > 800-553-4676
39
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Handle Color Red Red/Black Red
3RZHU7RROV DQG$FFHVVRULHV
HIGH-LEVERAGE Cat. No. 63225 J63225N 63215 STANDARD Cat. No. 63050 63050-EINS 63050-INS J63050
7HVWDQG 0HDVXUHPHQW
63050
9RLFH'DWD9LGHR
Includes core Cable Cutter features plus: Precision, one-hand shearing action Cable-gripping shear-type jaws Perfect for working in confined spaces Jaw capacity of 1.06" (3 cm)
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
&DEOH&XWWHUV Cable Cutters – Coaxial • Cuts up to 1" (2.5 cm) aluminum and copper coaxial cable • Precision, one-hand shearing action without compression or frayed ends • Forged body with heat-treated and precision-ground steel blades withstands frequent cutting • Hot-riveted design requires no adjustment while maintaining a smooth, precise operation • Plastic-dipped handles for maximum comfort and gripping power • When cutting drop wire with an inner steel conductor, we recommend diagonal-cutting pliers (Cat. No. D2000-28) HOW TO USE: Use a back-and-forth motion to score the cable until you reach the inner conductor. • The inner conductor may then be cut by squeezing the handles firmly
63030
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
WARNING: Do NOT cut steel or ACSR. Cat. No. 63030
Cutting Capacity 1" (2.5 cm) Aluminum and Copper
Handle Color Blue
Handle Finish Plastic-Dipped
Overall Length 8.25" (21 cm)
All-Purpose Shears and BX Cutter • Cuts BX cable, sheet metal, steel strapping and bundling wire • Lightweight and compact • Wire stripping notch in nose for added convenience • High-leverage; shear-type design for one-hand operation • Handle cavity is designed to restore BX cable to original shape after cutting
1104
WARNING: Do NOT cut steel or ACSR. Cat. No. 1104
Cutting Capacity Cuts BX Cable, Sheet Metal, Steel Strapping and Bundling Wire
Handle Color Red
Handle Finish Plastic-Dipped
Overall Length 7.625" (19.4 cm)
Heavy-Duty Cable Shears • Cuts ACSR, steel, and most hardened wire • Heavy-duty, tempered steel blades • Blades grip cable and cut easily at center of jaws • Lock keeps handles closed for easy storage • Comfortable, plastic-coated handles for steady grip • Hardened steel, precision cutting blades for long service life • Unique triangular jaws cleanly cut cable without compression or frayed ends Cat. No. 63016
63016
Cutting Capacity Upp to 1/4" (6.4 ( mm)) Copper pp and Mild Steel Strands, upp to 3/16" (4.8 ( mm)) Aircraft Cable, Wire Rope, Aluminum and Copper Rods, up to 5/32" (4 mm) for Steel and Iron Rods
Multi-Cable Cutter • Hardened steel precision-ground cutting blades for long life • Copper curved cutter cleanly cuts round copper cable without compression or frayed ends • Double-dipped grips for comfort • Coil spring provides fast self-opening action • Holes for looping and bending wire • Convenient lock for storage also prevents accidental locking and loosening over time Cat. No. 63020
40
Cutting Capacity Upp to 12 AWG Solid and Stranded Copper pp Wire, Upp to 0.032" (.081 ( mm) Diameter Stainless Steel, Upp to 1/2" ((12.7 mm) Multi-conductor Cable, Coaxial Cable RG-6 Quad, RG-59 and RG-62
www.kleintools.com > 800-553-4676
Screw Shearing 6-32, 8-32
Handle Color Blue
Handle Finish Plastic-Dipped
Overall Length 7.5" (19.1 cm)
TM
63020
Handle Color Red
Handle Finish Plastic-Dipped
Overall Length 7” (17.78 cm)
3OLHUV
&DEOH&XWWHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV 63035
®
Cat. No. 63035 63035SC
Cutting Capacity 350 MCM Copper, 350 MCM Aluminum 9/32" (0.7 cm) Wire Rope and Cables
Handle Color Red Red
Weight 1.7 lb (0.8 kg) 2.0 lb (0.9 kg)
Overall Length 16.75" (42.545 cm) 16" (40.64 cm)
7RRO.LWV
WARNING: Do NOT cut steel or ACSR.
&RQGXLW7RROV DQG0HDVXUHPHQW
63035SC
'ULYHUVDQG :UHQFKHV
Utility Cable and Rope Cutters • Forged steel with black-oxide finish for long life hook jaws grab and hold cable while • Shear-type shear-cutting action makes clean cuts • Beveled tips for positive mating • Hinge bolt with pin-set nut for proper blade tension No. 63035SC cuts wire up to 9/32" (0.7 cm) • Cat. and Stoffel container seals • Cat. No. 63035 is not designed to cut steel or ACSR
Stoffel® is a registered trademark of Stoffel Seals Corporation.
6DIHW\33( DQG&RPIRUW
Standard and Communication Cable Cutters
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
• Lightweight, yet efficient shear-type cable cutters hook-jaw blades grab and hold cable while • Replaceable shear-cutting action makes clean cuts strong fiberglass handles with heavy vinyl • Exceptionally grips for comfort and slip resistance • Heavy-duty pins in head serve as blade-stops • Jaws are forged tool steel with black-oxide finish for long life tips assure positive mating, and hinge on a rugged bolt with a pin• Beveled set nut to maintain proper blade tension • Makes a clean, even cut for ease in fitting lugs and terminals • Cat. No. 63041TH includes rubber sleeves • Cat. No. 63047 cuts lead or rubber-covered communications cable
63041TH
9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW
63047
WARNING: Do NOT cut steel or ACSR. Soft Cable Maximum Capacity 1-3/8" (3.5 cm) Diameter 1-3/8" (3.5 cm) Diameter 1-3/4" (4.5 cm) Diameter Up to 2-1/4" (5.7 cm) Diameter
Cable Maximum Capacity 500 MCM Copper, 750 MCM Aluminum 500 MCM Copper, 750 MCM Aluminum 1000 MCM Copper, 1200 MCM Aluminum 900-Pair Soft Copper, MCM Aluminum
Replacement Blade 63081 63081 63090 63110
Weight 5.3 lb (2.4 kg) 5.3 lb (2.4 kg) 8.0 lb (3.6 kg) 8.6 lb (3.9 kg)
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 63041 63041TH 63045 63047
Overall Length 25.5" (64.8 cm) 25.5" (64.8 cm) 32" (81.3 cm) 37" (94 cm)
41
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
Ratcheting Cable Cutters • Reduced hand force for easier cutting • Patented two-step ratchet mechanism requires fewer strokes per cut release lever opens blades easily in every cutting position to allow • Quick removal of the cable before completion of cut • Hardened steel cutting blades for lasting strength and sharpness • Locking lever keeps handles closed for easy transport; fits in a toolbox or bag
63060
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
&DEOH&XWWHUV
7RRO.LWV
63711
63601
6DIHW\33( DQG&RPIRUW
63750
Replacement parts available (blades, handles, springs, pawl sets and release plates). Go to www.kleintools.com or call 800-553-4676 for a full listing of replacement parts.
-REVLWH $FFHVVRULHV
Cat. No. 63060 63711 63750
Maximum Cable Capacity Copper 600 MCM 600 MCM 1000 MCM Frequent Use: 750 MCM 600 MCM
Handle Color
Overall Length
Communication Cable 1-1/8" (2.9 cm) 1-1/8" (2.9 cm) 2-1/16" (5.2 cm)
Red Red Red
10.25" (26 cm) 11.5" (29.2 cm) 12.125" (30.8 cm)
2-1/16" (5.2 cm)
Red
10.25" (26 cm)
ACSR Ratcheting Cable Cutters • High-leverage ratcheting mechanism for easier cutting lever opens blades easily in every cutting position • Quick-release (Allows removal of the cable before completion of cut) • Hardened steel cutting blades for long lasting strength and sharpness • Tools can be locked when not in use • Cat. No. 63800ACSR features cutting inserts with screws
63607
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
63601
Aluminum 750 MCM 750 MCM 1000 MCM Frequent Use: 750 MCM 1000 MCM
WARNING: Do NOT cut steel or ACSR.
63800ACSR
Replacement parts available (blades, handles, springs, pawl sets and release plates) Go to www.kleintools.com or call 800-553-4676 for a full listing of replacement parts.
Cat. No. 63607 63800ACSR
42
ACSR 336 MCM 477 MCM
Maximum Cable Capacity Aluminum Copper 600 MCM 400 MCM 1-1/4" (3.18 cm) 1" (2.54 cm)
www.kleintools.com > 800-553-4676
Handle Color
Overall Length
Yellow Red
10.25" (26 cm) 13.75" (34.9 cm)
Guy Strand)
— 1/2" (1.27 cm)
3OLHUV
&DEOH&XWWHUVDQG6WULSSHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Heavy-Duty grips for comfort and slip resistance Blade-advance knob for fast rotation of the blade to engage the cable or other material being cut Quick-release mechanism allows for removal of the cable or rod before completion of the cut, if desired Not designed for cutting EHS guy strand or reinforcement rod Cuts steel and ACSR
63700
Soft Cable Maximum Capacity 2-1/4" ((5.7 cm)) Diameter, 750 MCM Diameter, Copper or Aluminum
Steel Cable Maximum Capacity 1-1/4" ((3.2 cm)) Diameter ACSR, ACAR, 7/16" (1.1 ( cm)) Diameter Common Guyy Strand, 5/8" (1.6 cm) Diameter Steel Wire Rope, 1/2" (1.3 cm) Diameter Steel Rod (C.R.S. SOFT)
Handle Color Yellow
Overall Length 28" (71.1 cm)
6DIHW\33( DQG&RPIRUW
Cable Strippers
Strip Dimensions 350 MCM, 500 MCM, 600 MCM, 750 MCM 2/0, 3/0, 4/0, 250 MCM
7RRO6WRUDJH
Cable Size MTW/THHN/THWN-2 MTW/THHN/THWN-2
-REVLWH $FFHVVRULHV
Large Cable Strippers • Effectively removes cable insulation • Quicker and safer than using a knife • Clover design features 4 different wire sizes in one tool • Ensures precise cuts every time Cat. No. 21050 21051
21050
Replacement Blades
21051B 21051C
For use with Klein’s large cable strippers (Cat. No. 21050 and 21051) For models purchased 2019 and later
9RLFH'DWD9LGHR
Cable Tools
50400
N1
3RZHU7RROV DQG$FFHVVRULHV
OL
S
INC
. U.S
N1
TO
.A.
KLE IN
TO OL
S
INC .
U.S. A.
Overall Length 12" (30.5 cm) 14.5" (36.8 cm)
EI N
Maximum Cable Capacity 350 MCM 500 MCM
KL
Tool Opening 7/8" (2.2 cm) 1-1/64" (2.6 cm)
7HVWDQG 0HDVXUHPHQW
Cable Benders • Forged, one-piece steel construction for exceptional strength and durability • Head is angled 22° for ease in bending cable in tight, hard-to-access places • Corrosion-resistant, black-oxide finish with heavy-duty double-dipped plastic handle • It is recommended that two benders be used for easier bends
Cat. No. 50400 50402
7RRO.LWV
Cat. No. 63700
&RQGXLW7RROV DQG0HDVXUHPHQW
• • • •
'ULYHUVDQG :UHQFKHV
Ratcheting ACSR Cable Cutter – Heavy-Duty design provides maximum • Ratchet-action leverage with minimum effort for heavy-duty use heat-treated, shear-type blades, plus • Forged, 24" (61 cm) long fiberglass handles with
2 benders are recommended for easier bends
43
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
Bolt Cutters – Steel and Fiberglass Handle • All-purpose, center-cut jaws alloy tool steel jaws are precision ground for sure, • Forged, efficient cutting and long life plate reinforcement prevents jaw bolts from loosening • Lock or turning, keeping jaws in correct alignment • NOT for cutting cable 63314
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
%ROW&XWWHUV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
63118
Cat. No. 63314 63318 63324 63330 63336 63342 63118 63124 63130 63136
Soft & Medium Cutting Max Capacity 5/16" (0.8 cm) 3/8" (1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 9/16" (1.4 cm) 11/16" (1.8 cm) 3/8" (1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 1/2" (1.3 cm)
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
* Up to Brinell 300, Rockwell C31.,** Up to Brinell 400, Rockwell C42.
44
www.kleintools.com > 800-553-4676
Hard Material Cutting Max Capacity 3/16" (0.5 cm) 1/4" (0.6 cm) 5/16" (0.8 cm) 3/8" (1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 1/4" (0.6 cm) 5/16" (0.8 cm) 3/8" (1 cm) 3/8" (1 cm)
Handle Material Steel Steel Steel Steel Steel Steel Fiberglass Fiberglass Fiberglass Fiberglass
Replacement Blade 63814 63818 63824 63831 63836 63842 63918 63924 63930 63936
Overall Length 14" (35.6 cm) 18" (45.7 cm) 24" (61 cm) 30" (76.2 cm) 36" (91.4 cm) 42" (106.7 cm) 18.25" (46.4 cm) 24.5" (62.2 cm) 30.5" (77.5 cm) 36.5" (92.7 cm)
6WULSSHUV&XWWHUV DQG&ULPSHUV
'ULYHUVDQG :UHQFKHV
&RQGXLW7RROV DQG0HDVXUHPHQW
7RRO.LWV
6DIHW\33( DQG&RPIRUW
-REVLWH $FFHVVRULHV
7RRO6WRUDJH
9RLFH'DWD9LGHR
7HVWDQG 0HDVXUHPHQW
3RZHU7RROV DQG$FFHVVRULHV
SHEET METAL/HVAC
3OLHUV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
Aviation Snips with Wire Cutter • Serrated blades of forged steel for superior strength and durability integrated wire cutter on outside of blade for duct and • Unique ceiling suspension wire • Cuts 18 gauge steel and 22 gauge stainless steel • Spring-action lock allows opening of tool with one handed operation • Features color-coded comfortable contoured grips • Convenient hang-hole for easy storage • Conforms to ASME B107.16M performance standard
1202S
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6KHHW0HWDO+9$&
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
1201R
Cat. No. 1200L 1201R 1202S
1200L
Type Aviation with Wire Cutter Aviation with Wire Cutter Aviation with Wire Cutter
Cutting Pattern Left/Straight Right/Straight Straight/Wide Curves
Color Code Red Green Yellow
Cutting Capacity 18 Gauge Steel, 22 Gauge Stainless Steel 18 Gauge Steel, 22 Gauge Stainless Steel 18 Gauge Steel, 22 Gauge Stainless Steel
Cutting Length 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm)
Overall Length 10.063" (25.6 cm) 10.063" (25.6 cm) 10.063" (25.6 cm)
Snap Lock Punch • Steel jaw easily punches 3/8" (1 cm) wide impressions on metal edges to easily join pieces of sheet metal, duct, or siding • Compound-leverage mechanism for greater control and easy operation • All-steel construction and nickel-chrome plated hardware provide long life and durability • Convenient self-opening latch for one handed operation Cat. No. 86528
Handle Color Blue/Gray
Overall Length 8.4" (21.3 cm)
86528
Hand Notcher • Cuts 30° V shapes in sheet metal quickly and easily to make corners • High-impact steel jaw with 13/16" (2.1 cm) maximum throat depth • All steel construction with nickel-plate and black-oxide finish provides long life and durability • Comfortable, contoured grips cover hardened steel handles • For up to 24 gauge steel and 28 gauge stainless steel • Convenient self-opening latch for one handed operation Cat. No. 86526
Handle Color Blue/Gray
Overall Length 9" (23.2 cm)
5-Blade Crimper • Produces factory-precision indentations in stove pipe and round duct with just a squeeze • Compound-leverage mechanism makes precise indentations • Comfortable, contoured grips cover hardened steel handles • All steel construction and nickel-plating provide long life and durability • Convenient self-opening latch for one handed operation • Crimps 24 gauge steel and 28 gauge stainless steel • Convenient self-opening latch for one handed operation Cat. No. 86520
46
Jaw Size 1.75" (4.5 cm)
Handle Color Blue/Gray
www.kleintools.com > 800-553-4676
Overall Length 10.2" (26 cm)
86526
86520
3OLHUV
6KHHW0HWDO+9$&
6WULSSHUV&XWWHUV DQG&ULPSHUV
Cutting Capacity 24 Gauge g Steel, 28 Gauge Stainless Steel
89555 89556
Cutting Length 3.5" (8.9 cm)
Overall Length 12" (30.5 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 89556
REPLACEMENT BLADE KIT
Jaw Size 3" (7.6 cm) 3" (7.6 cm)
Handle Color Blue/Gray Blue/Gray
6DIHW\33( DQG&RPIRUW
Type Straight Offset
86522
86524
Overall Length 8.6" (21.9 cm) 5.4" (13.7 cm)
-REVLWH $FFHVVRULHV
Folding Tools • Two folding depths: 3/8" (1 cm) and 1" (2.5 cm) • Handy sight gauges for accurate depth alignment • Made of heavy-duty 16 gauge steel for strength Folds 24 Gauge Steel, 28 Gauge Stainless Steel 24 Gauge Steel, 28 Gauge Stainless Steel 24 Gauge Steel, 28 Gauge Stainless Steel
86532
Overall Length 12" (30.5 cm) 18" (45.7 cm) 24" (61 cm)
Nylon Tie Tensioning Tools • Designed for work with ties rated at 120 - 250 lb (54 - 113 kg) • Tensions up to 65 lb of force (30 kg) • Maximum tie width of 15/32" (1.2 cm) • Handle grips for comfort tie material is automatically • Excess cut off (Cat. No. 86571 only)
9RLFH'DWD9LGHR
86571
7HVWDQG 0HDVXUHPHQW
Adjustable Hole Cutter • Cuts 2" to 12" (5.1 to 30.5 cm) holes in sheet metal • For up to 24 gauge steel and 26 gauge stainless steel • Inch and centimeter measurement scales are molded into the body • Quality bearings assure a long cutting life • Installs into standard electric drill chucks • Includes replacement bit and L-Style Hex-Key to tighten the bit • Features an adjustable Pivot Point for accurate hole size
7RRO6WRUDJH
Cat. No. 86530 86532 86534
7RRO.LWV
Seamers – Straight and Offset • 3" jaw folds 22 gauge steel and 24 gauge stainless steel • Jaw marked in 1/4" increments for precise bending measurements • Compound-leverage mechanism easily and accurately bends, seams, and flattens sheet metal • All-steel construction and nickel-chrome plated hardware for long life and durability • Convenient self-opening latch for one handed operation • Comfortable, contoured grips cover hardened steel handles Cat. No. 86522 86524
'ULYHUVDQG :UHQFKHV
Tin Snips • 12" (30.5 cm) long tool with high-carbon cutting blades • Full 3.5" (8.9 cm) blades cut straight and wide curves • Excellent for 24 gauge steel and 28 gauge stainless steel • Easily cuts tin, copper, aluminum, soft metals and vinyl • All steel construction for long life and durability • Easily replaceable cutting blades (Cat. No. 89555) • Large handles to accommodate gloves
86570
3RZHU7RROV DQG$FFHVVRULHV
REPLACEMENT DRILL BIT 89551 89552
Hole Diameter 2" to 12" (5.1 to 30.5 cm)
Overall Length 7.2" (18.3 cm)
Cat. No. 86570 86571
Description Nylon Tie Tensioning Tool Nylon Tie Tensioning Tool with Auto Cutoff
Overall Length 7.8" (19.2 cm) 8.5" (21.6 cm)
www.kleintools.com > 800-553-4676
47
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Cat. No. 89552
DUCT TOOLS
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Duct Cutter with Wire Cutter All-steel double edge blade easily cuts fiber board, • fiberglass lined, and flexible ducts • Built-in wire cutter for convenience • Compound leverage mechanism for easy wire cutting • Comfortable, contoured grips cover hardened steel handles construction and nickel-chrome plated • All-steel hardware provides long life and durability • Convenient self-opening latch for one handed operation Cat. No. 89554
89554
Overall Length 12.5" (31.9 cm)
Duct Stretcher • Aligns and pulls ductwork together, easing installation of drive cleats • Offset handle protects hand Cat. No. 89565
Overall Length 16" (40.6 cm)
89565
Serrated Duct Knife • Cuts duct board and flexible duct • Double-edged knife: fine edge and serrated • Cushion-grip handle for comfort • Includes puncture resistant nylon sheath with belt loop Cat. No. DK06
Blade Length 5.5" (14 cm)
Blade Material Stainless Steel
Overall Length 10.781" (27.4 cm)
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local laws on legality of selling or possessing these knives.
48
www.kleintools.com > 800-553-4676
DK06
6WULSSHUV&XWWHUV DQG&ULPSHUV
POCKET KNIVES
3OLHUV
'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW
Blade Length 2.95" (6.4 cm)
Blade Material Stainless Steel
Handle Material Length Closed Aluminum 4.23" (10.7 cm)
-REVLWH $FFHVVRULHV
Blade Type Drop Point
44228
Overall Length 7.18" (18.2 cm)
7RRO6WRUDJH 44213
keeps blade closed Low-carry pocket clip allows the knife to sit low and out of the way Lanyard hole for secure tethering Blade secures open with a frame lock (Cat. No. 44213) or a liner lock (Cat. No. 44223)
Blade Length 3.4" (8.6 cm) 3.5" (8.9 cm)
Blade Material 420HC Stainless Steel 440A Stainless Steel
Handle Material Length Closed Stainless Steel 4.6" (11.7 cm) Anodized Aluminum 4.6" (11.7 cm)
44223
Overall Length 8.0" (20.3 cm) 8.1" (20.6 cm)
3RZHU7RROV DQG$FFHVVRULHV
Blade Type Tanto Half-Serrated Drop Point
7HVWDQG 0HDVXUHPHQW
Cat. No. 44213 44223
9RLFH'DWD9LGHR
Assisted-Open Pocket Knives No. 44213 features a bearing-assisted opening mechanism for smooth deployment • Cat. of the blade and ambidextrous flip-lever for easy one-finger opening No. 44223 features a spring-loaded opening mechanism for quick deployment • Cat. of the blade, dual thumb studs for both left- and right-hand opening and safety lock
• • •
6DIHW\33( DQG&RPIRUW
Cat. No. 44228
7RRO.LWV
Electrician’s Bearing-Assisted Open Pocket Knife • Easy one-handed, bearing-assisted opening • Drop Point blade • Strips 14-10 AWG solid, 16-12 AWG stranded wire when the blade is closed • Hole at the base of the blade for looping wire • Rugged aluminum handle and a frame lock to secure the blade open • Ambidextrous flip lever for easy one finger opening • Low carry pocket clip keeps the knife low in your pocket, yet easy to access • Lanyard hole for secure tethering
www.kleintools.com > 800-553-4676
49
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, ppossiblyy resultingg in bodilyy injury. j y Check local laws on legality g y of sellingg or possessing p g these knives.
3OLHUV
Electrician's Pocket Knives • Liner lock secures blade in open position • Stripping notches on the back of the blade • Low-carry pocket clip • Cat. No. 44217 has a No. 2 Phillips driver
STRIPPING NOTCHES 10-14 AWG Solid and 12-16 AWG Stranded
44201
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
3RFNHW.QLYHV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
44217
Cat. No. 44201 44217
Blade Type Drop Point Drop Point
Blade Length 3.375" (8.6 cm) 3.375" (8.6 cm)
Blade Material 440A Stainless Steel 440A Stainless Steel
Handle Material Length Closed Anodized Aluminum 4.7" (11.9 cm) Anodized Aluminum 4.7" (11.9 cm)
Overall Length 7.969" (20.2 cm) 10" (25.4 cm)
Rugged Pocket Knives • Liner lock secures blade in open position • Rugged handle with rubber finger grip • Lanyard hole allows knife to be tethered • Low-carry pocket clip
4 44220
44222
Cat. No. 44220 44222
Blade Type Drop Point Tanto
Blade Length 3.5" (8.9 cm) 3.5" (8.9 cm)
Blade Material 440A Stainless Steel 440A Stainless Steel
Handle Material Length Closed Anodized Aluminum 4.703" (12 cm) Nylon/Rubber 4.703" (12 cm)
Overall Length 8.203" (20.8 cm) 8.203" (20.8 cm)
Realtree Xtra® and Realtree AP-XTRA Camouflage Design is a registered trademark of Jordan Outdoor Enterprises, Ltd.
Silver Aluminum Lockback Knives • Lockback secures blade in open position • Reversible thumb stud for easy one-hand opening • Cat. Nos. 44001, 44006, and 44007 include removable pocket clip
44000
Coping Blade
Cat. No. 44000 44001 44006 44007
Blade Type Drop Point Drop Point Hawkbill Coping
Blade Length 2.25" (5.7 cm) 2.5" (6.4 cm) 2.625" (6.7 cm) 2.5" (6.4 cm)
Blade Material AUS 8 Stainless Steel AUS 8 Stainless Steel AUS 8 Stainless Steel AUS 8 Stainless Steel
Handle Material Anodized Aluminum Anodized Aluminum Anodized Aluminum Anodized Aluminum
Length Closed 3.125" (7.9 cm) 3.5" (8.9 cm) 3.875" (9.8 cm) 3.5" (8.9 cm)
Overall Length 5.5" (14 cm) 6.125" (15.6 cm) 6.625" (16.8 cm) 6.125" (15.6 cm)
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local laws on legality of selling or possessing these knives.
50
www.kleintools.com > 800-553-4676
Drop Point Blade
Hawkbill Blade
3OLHUV
3RFNHW.QLYHV
Blade Length 2.25" (5.7 cm) 2.5" (6.4 cm) 2.563" (6.5 cm)
Blade Material AUS 8 Stainless Steel AUS 8 Stainless Steel AUS 8 Stainless-Steel
Handle Material Anodized Aluminum Anodized Aluminum Anodized Aluminum
Overall Length 5.5" (14 cm) 6.125" (15.6 cm) 6.125" (15.6 cm)
Drop Point Blade
Tanto Blade
POCKET CLIP AVAILABLE ON 44005C 44005RC
44002
44005RC
Blade Length 2.375" (6 cm) 2.75" (7 cm) 2.5" (6.4 cm) 2.625" (6.7 cm) 2.625" (6.7 cm)
Blade Material AUS 8 Stainless-Steel AUS 8 Stainless Steel AUS 8 Stainless Steel AUS 8 Stainless Steel AUS 8 Stainless Steel
Handle Material Nylon Resin Nylon Resin Nylon Resin Nylon Resin Nylon Resin
Length Closed 3.5" (8.9 cm) 4.125" (10.5 cm) 3.5" (8.9 cm) 4.203" (10.7 cm) 4.203" (10.7 cm)
Overall Length 6" (15.2 cm) 7" (17.8 cm) 6" (15.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm)
2.625" (6.7 cm)
AUS 8 Stainless Steel
Nylon Resin
4.203" (10.7 cm)
6.75" (17.2 cm)
2.625" (6.7 cm)
AUS 8 Stainless Steel
Nylon Resin
4.203" (10.7 cm)
6.75" (17.2 cm)
Drop Point Blade
Hawkbill Blade
Sheepsfoot Blade
Hawkbill — Rounded Tip Blade
9RLFH'DWD9LGHR
Blade Length 2.875" (7.3 cm)
Blade Material 440A Stainless Steel
Handle Material Length Closed Aluminum 3.8" (9.7 cm)
Overall Length 6.75" (17.2 cm)
3RZHU7RROV DQG$FFHVVRULHV
Blade Type Drop Point
44142
7HVWDQG 0HDVXUHPHQW
Compact Pocket Knife • Lockback secures blade in open position • Corrosion resistant black aluminum handle • Reversible thumb stud for easy one-hand opening • Lanyard hole allows knife to be tethered • Low-carry pocket clip Cat. No. 44142
7RRO6WRUDJH
44005C
Blade Type Drop Point Drop Point Sheepsfoot Hawkbill Hawkbill Rounded Tip Hawkbill Rounded Tip Hawkbill with Clip
-REVLWH $FFHVVRULHV
Cat. No. 44002 44003 44004 44005 44005R
6DIHW\33( DQG&RPIRUW
44005RC
7RRO.LWV
Lockback Knives • Lockback secures blade in open position • Impact-resistant nylon resin handle with rubber insert • Reversible thumb stud for easy one-hand opening • Cat. Nos. 44005C and 44005RC include pocket clip
Length Closed 3.125" (7.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
Blade Type Drop Point Drop Point Tanto
'ULYHUVDQG :UHQFKHV
Cat. No. 44000-BLK 44001-BLK 44052BLK
44000-BLK
6WULSSHUV&XWWHUV DQG&ULPSHUV
Black Aluminum Lockback Knives • Lockback secures blade in open position • Black stainless-steel blade and black anodized-aluminum handle • Reversible thumb stud for easy one-hand opening • Cat. Nos. 44001-BLK and 44052-BLK include removable pocket clip
www.kleintools.com > 800-553-4676
51
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, ppossiblyy resultingg in bodilyy injury. j y Check local laws on legality g y of sellingg or possessing p g these knives.
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
Stainless Steel Compact Knives • Lockback secures blade in open position • High-grade stainless steel handle with hardwood inlay • Lightweight and compact Cat. No. 44032 44033 44034
Blade Type Drop Point Drop Point Drop Point
Blade Length 1.625" (4.1 cm) 2.25" (5.7 cm) 3" (7.6 cm)
Blade Material Stainless Steel Stainless Steel Stainless Steel
44032
Handle Material Stainless Steel Stainless Steel Stainless Steel
6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
Length Closed 2.406" (6.1 cm) 3" (7.6 cm) 4" (10.2 cm)
Overall Length 4.25" (10.8 cm) 5.25" (13.3 cm) 7" (17.8 cm)
Wood Grain Handle Pocket Knives • Liner lock secures blade in open position • Durable plastic handle with faux wood grain • Shackle allows knife to be tethered
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
3RFNHW.QLYHV
1550-11
1550-44
Cat. No. 1550-4 1550-11 1550-44
Blade Type Hawkbill Coping Hawkbill
Blade Length 2.625" (6.7 cm) 2.25" (5.7 cm) 2.625" (6.7 cm)
Blade Material Carbon Steel Carbon Steel Stainless Steel
Handle Material Plastic Plastic Plastic
Length Closed 4.141" (10.5 cm) 3.25" (8.3 cm) 3.5" (8.9 cm)
Overall Length 6.125" (15.6 cm) 5.5" (14 cm) 6.125" (15.6 cm)
Slitting Pocket Knife • Liner lock secures blade in open position • Durable plastic handle • Shackle allows knife to be tethered Cat. No. 1550-24
Blade Type Hawkbill
Blade Length 2.75" (7 cm)
1550-24
Blade Material Stainless Steel
Handle Material Length Closed Plastic 4.5" (11.4 cm)
Overall Length 6.75" (17.2 cm)
Handle Material Length Closed Ebony Wood 3.75" (9.5 cm) Ebony Wood 5" (12.7 cm)
Overall Length 6.375" (16.2 cm) 8.75" (22.2 cm)
Sportsman Knives • Lockback secures blade in open position • Wood handle with brass holsters • Cat. No. 44037 has a leather case with belt loop
Cat. No. 44036 44037
Blade Type Clip Point Clip Point
Blade Length 2.625" (6.7 cm) 3.375" (8.6 cm)
Blade Material Stainless Steel Stainless Steel
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local laws on legality of selling or possessing these knives.
52
www.kleintools.com > 800-553-4676
44037
3OLHUV
3RFNHW.QLYHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Multi-Tools
Blade Type Blade Length Standard 2.5" (6.4 cm) Spearpoint, p p Screwdriver-Tip
Blade Material Carbon Steel
Handle Material Length Closed Plastic with 3.75" (9.5 cm) Faux Wood Grain
Overall Length 6.625" (16.8 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 1550-2
1550-2
Handle Material Length Closed Plastic with Faux 3.75" (9.5 cm) Wood Grain
Overall Length 6.5" (16.5 cm)
-REVLWH $FFHVVRULHV
Blade Material Carbon Steel
1550-6
6DIHW\33( DQG&RPIRUW
Blade Type Blade Length Curved Sheepp 2.375" (6 ( cm) foot, Standard 2.5" (6.4 cm) Spearpoint
7RRO.LWV
3-Blade Pocket Knife – Sheepsfoot, Spearpoint and Screwdriver-Tip Blades • Curved sheepsfoot skinning blade – 2-3/8" (6 cm) long • Standard spearpoint blade – 2-1/2" (6.4 cm) long • Screwdriver-tip blade – 2-1/2" (6.4 cm) long • Screwdriver blade locks open
Cat. No. 1550-6
7RRO6WRUDJH 9RLFH'DWD9LGHR
Trip-Saver™ Multi-Tool multi-tool addresses the special needs of electricians and maintenance • Unique professionals while providing many other features handy on any job designed locking “L” handle snaps securely into the “L” channel, locking the • Specially fully opened blade or implement in place during use Features the following: Needle-Nose Pliers, Beveled Wire Cutter, Toothed Pipe Grippers, • Files (coarse and fine), 5-Slot Wire Stripper (10-18 AWG), Wire-Looping Hole, Scraper, Awl/Reamer, Serrated Sheepsfoot Knife, Clip-Point Knife, Standard/Metric Ruler, Drywall Saw, Locking “L” Handle, #1 and #2 Phillips Hex Bits, Small-Slotted Hex Bit, Large-Slotted Hex Bit, 1/4" Socket Adapter, Lanyard Hole, Nylon Pouch
Blade Length 1.875" (4.8 cm), 2.5" (6.4 cm)
Material Stainless Steel
Length Closed 5.75" (14.6 cm)
Overall Length 5.75" (14.6 cm)
3RZHU7RROV DQG$FFHVVRULHV
WARNING: Close handles to lock blade in place before use.
7HVWDQG 0HDVXUHPHQW
1016
Cat. No. 1016
'ULYHUVDQG :UHQFKHV
2-Blade Pocket Knife – Spearpoint and Screwdriver-Tip Blades • Standard spearpoint blade – 2-1/2" (6.4 cm) long • Screwdriver-tip blade – 2-1/2" (6.4 cm) long • Screwdriver-tip blade locks open
www.kleintools.com > 800-553-4676
53
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, ppossiblyy resultingg in bodilyy injury. j y Check local laws on legality g y of sellingg or possessing p g these knives.
UTILITY KNIVES
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local law on legality of selling, possessing, or carrying these knives.
Camouflage Assisted-Open Folding Utility Knife • Realtree Xtra Camo design handle with rubber grip and TPR overmold for a secure grip • Rugged, heavy-duty and durable construction • Spring-assisted opening with dual thumb stud for right- or left-handed use • Blade locks when in closed position • Low carry pocket clip • Lanyard hole
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
®
Cat. No. 44135
Length Closed 6.25" (15.9 cm)
44135
Overall Length 7" (17.8 cm)
Realtree Xtra® and Realtree AP-XTRA Camouflage Design is a registered trademark of Jordan Outdoor Enterprises, Ltd.
Folding Utility Knife • Push button to easily open and close • Rugged, heavy-duty and durable construction • Contains a wire stripping notch • High quality triple ground blades stay sharp longer • Rubber grips on handle for improved control and comfort • The bright orange handle color makes this knife easy to find in a tool bag or pouch
Auto-Loading Folding Retractable Utility Knife • Auto-loading blade for faster and safer blade changes • Internal blade storage holds and includes 3 blades • Rubber grips on handle for improved control and comfort • High quality triple ground blades stay sharp longer • Lock release to close knife • Equipped with belt clip 54
www.kleintools.com > 800-553-4676
44131
Cat. No. 44131
Length Closed 4" (10.2 cm)
Overall Length 6.25" (15.9 cm)
44130
Cat. No. 44130
Length Closed 4.125" (10.5 cm)
Overall Length 7.125" (18.1 cm)
3OLHUV
8WLOLW\.QLYHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 44136
Blade retracts fully into housing when cut is complete
Length Closed 5.672" (14.4 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 44136
Overall Length 5.75" (14.6 cm)
7RRO.LWV
Klein-Kurve™ Retractable Utility Knife • Rugged, heavy-duty and durable construction • Contains a wire-stripping notch • Internal blade storage includes and holds 6 blades • High quality triple ground blades stay sharp longer • Rubber grips on handle for improved control and comfort • Designed for improved cutting ability
Cat. No. 44133
Length Closed 6.5" (16.5 cm)
Overall Length 7" (17.8 cm)
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
Utility Knife Blades • Heavy-duty razor-edged blades size fits Klein and most • Universal other makes of utility knives • Blades are reversible for extra life • Blades made in the USA
Cat. No. 44101
Blade Length 2.438" (6.2 cm)
Blade Thickness 0.025" (0.6 mm)
Package Quantity 5
7HVWDQG 0HDVXUHPHQW
Overall Width 1.297" (3.3 cm)
9RLFH'DWD9LGHR
44101 44103
Dimensions 4-21/64" x 2-51/64" x 1-19/64" (11 x 7.1 x 3.3 cm)
6DIHW\33( DQG&RPIRUW
44133
Utility Knife Blade Dispenser • 50 blades included • High quality triple ground blades stay sharp longer • Gauge on dispenser indicates blades remaining • Convenient interim storage for used blades • Blades are compatible with all standard utility knives
Cat. No. 44103
'ULYHUVDQG :UHQFKHV
Auto-Retracting Utility Knife • Rugged, heavy-duty and durable construction • Knife incorporates a wire-stripping notch • Safety yellow handle for greater visibility • Blade removal/insertion without disassembly
3RZHU7RROV DQG$FFHVVRULHV
55
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
CABLE KNIVES
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local law on legality of selling, possessing, or carrying these knives.
Cable Skinning Utility Knife with Replaceable Blade sheepsfoot blade is replaceable • Heavy-duty to eliminate the need for sharpening locks securely by a captive lock screw, • Blade making it as a solid as a fixed-blade knife • Thumb stud for easy opening • Handle has rubber exterior for increased grip A lock-back design securely locks the • blade in the open position Pocket clip for easy storage and convenient access • Cat. No. 44218
Special Features Replaceable Blade Knife
Blade Length 2.5" (6.4 cm)
44218
Knife shown folding into handle
COPING BLADE 44138
HAWKBILL BLADE 44219
Replacement Blades
Blade Material 440A Stainless Steel
Handle Color Orange/Black
Overall Length 7.797" (19.8 cm)
Cat. No. 44219 44138
Blade Length 2.5" (6.4 cm) 2.0" (4.9 cm)
Cable/Lineman's Skinning Knives Nos. 1570-3 and 1570-3LR feature 3" (7.6 cm) steel blades that • Cat. withstand frequent scoring and slitting of cable jacket • Notch on blade back for scraping or removing wire insulation • Comfortable textured handle with finger grooves and guard • No contact between stainless steel ring and hardened steel blade (Cat. No. 1570-3) • Rectangle-shaped handle design for attachment to some utility hot stick equipment • Leather sheath available, Cat. No. 5163 only for Cat. Nos. 1570-3 and 1570-3LR • Cat. No. 1580-3 has a 2" (5.2 cm) blade for increased control when scoring and
Blade Type Hawkbill Coping
Package Quantity 3 3
1570-3
1570-3LR
slitting cable jacket and an ergonomic handle for maximum comfort
Cat. No. 1570-3 1570-3LR 1571INS 1580-3
Special Features Hook Blade, Notch, and Ring Hook Blade and Notch Measuring Marks on Handle Hook Blade, Notch, and Ring
Blade Length 3" (7.6 cm) 3" (7.6 cm) 2.375" (6 cm) 2.047" (5.2 cm)
Blade Material Steel Steel 1095 Steel Steel
Handle Color Black Black Orange 2-Layer Insulation Black
Overall Length 8" (20.3 cm) 8" (20.3 cm) 8.75" (22.2 cm) 8.75" (22.2 cm)
1580-3
HANDLE FINISH 56
www.kleintools.com > 800-553-4676
1571-INS INS INSULATED 2-Layer Protection
3OLHUV
&DEOH.QLYHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Cable-Sheath Splitting Knife • Compact, lightweight knife for opening lead cables • Rugged, forged tempered cutlery steel blade • Sharp chisel-shaped edge • Hammer head on back • Plastic-dipped handles for comfort • Leather guard available (Cat. No. 5574S)
1515 S
Blade Length 2.75" (70 cm)
Overall Length 7.375" (18.7 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW 1515-1
Cat. No. 1515-1
Blade Length 4.5" (11.4 cm)
Overall Length 9" (22.9 cm)
7RRO.LWV
Bell System Cable-Sheath Splitting Knife Heavy-Duty • Heavy-duty knife for splitting cable sheaths • Rugged, forged tempered cutlery steel blade • Sharp chisel-shaped edge • Plastic-dipped handles for comfort • Leather guard available (Cat. No. 5574L)
6DIHW\33( DQG&RPIRUW 44200
Cat. No. 44200
Blade Length 1.75" (4.5 cm)
Overall Length 6.25" (15.9 cm)
-REVLWH $FFHVVRULHV
Cable-Splicer's Knife • Special-purpose short blade with comfortable, full-sized, heavy-duty handle blade made of the finest cutlery steel, tough and carefully • Coping-type tempered to hold its edge • Handle is textured for comfort and firm grip • Hang hole for easy storage and portability
'ULYHUVDQG :UHQFKHV
Cat. No. 1515-S
7RRO6WRUDJH
Cat. No. Kit Contains 46037 Cable Splicer's Kit
Weight 8 oz (227 g)
7HVWDQG 0HDVXUHPHQW
Cat. No.
9RLFH'DWD9LGHR
Cable-Splicer's Kits • Cuts cable, telephone wire, and strips insulation • Dimensions: 2-1/8" x 7-1/2" (5.4 cm x 19.1 cm)
Description
Cat. No.
Description
44200 21010 5187
Cable Splicer's Knife, 6-1/2" (16.5 cm) Free-Fall Snip Scissors and Cable Splicer's Knife Holder
Weight 9.3 oz (264 g) 46037
3RZHU7RROV DQG$FFHVVRULHV
44200 Cable Splicer's Knife, 6-1/2" (16.5 cm) 2100-7 Electrician's Scissors, Nickel Plated 5187 Scissors and Cable Splicer's Knife Holder Cat. No. Kit Contains 46039 Cable Splicer's Kit with Free-Fall Snip
46039
57
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
SCISSORS
3OLHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
2100-5
9RLFH'DWD9LGHR
7RRO6WRUDJH
Electrician's Scissors • Nickel plated to resist corrosion (Cat. Nos. 2100-5 and 2100-7) for stripping 19 AWG and 23 AWG wire on the upper blade • Notches (Cat. Nos. 2100-7, 2100-8 and 2100-9) • Extended handle to provide comfort and cutting leverage (Cat. No. 2100-8)
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
2100-7
2100-9
Cat. No. 2100-5 2100-7 2100-8 2100-9 21010-6-SEN
58
Special Features Scraper, File Scraper, File, Stripping Notches, Serrated Blades Free-Fall Snip, Extended Handle, Serrated Blades Free-Fall Snip, Serrated Blades Free-Fall Snip, Scarper, File, Serrated Blades
www.kleintools.com > 800-553-4676
Application Telecom, Electrical, Heavy-Duty Cutting Telecom, Electrical, Heavy-Duty Cutting Wire Cutting; Stripping Wire Cutting; Stripping Cable Cutting, Stripping, Deburring
Material Steel Steel Stainless Steel Stainless Steel High Carbon Steel
Cutting Length 1.875" (4.8 cm) 1.875" (4.8 cm) 1.875" (4.8 cm) 1.875" (4.8 cm) 1.875" (4.8 cm)
Overall Length 5.25" (13.3 cm) 5.25" (13.3 cm) 6.313" (16 cm) 5.25" (13.3 cm) 6.25" (15.9 cm)
3OLHUV
6FLVVRUV
6WULSSHUV&XWWHUV DQG&ULPSHUV 26001
Special Features Serrated Blades, Notches
Application Cable Cutting, Stripping, Deburring
Material Carbon Steel
Cutting Length 1.875" (4.8 cm)
Overall Length 6.75" (17.2 cm)
'ULYHUVDQG :UHQFKHV
All-Purpose Electrician's Scissors cutting notch in blade provides increased leverage and • Cable stability on tough cuts of up to 14 AWG wire • Strips 19 and 23 AWG wire forged high carbon steel blades maintain sharpness • Durable, and outlast stamped designs • Ergonomic handle fits a variety of hold preferences • Notch in tip for deburring electrical boxes Cat. No. • Serrated teeth allow for non-slip cutting action 26001 Scraper on both blades for cleaning wire •
&RQGXLW7RROV DQG0HDVXUHPHQW
High-Leverage Shears • Nickel-chrome plating resists corrosion and rusting • Cat. Nos. 22001 and 22002 have broad, short jaws
7RRO.LWV 22000
6DIHW\33( DQG&RPIRUW
22001
-REVLWH $FFHVVRULHV
22002
Special Features Extended Handle, Comfort, Cutting Leverage Serrated Blade, Broad Short Jaws Extended Handles, Serrated Blade, Broad Short Jaws High Leverage Utility Shear, 8" (20.3 cm) Extended Handles
Application Cuts Light Metals, Rubber, Heavy Fabrics Cuts Light Wire, Fabric, Cable, Cordage Cuts Light g Metal, Rubber, Cable, Wire Metal Screens, Cordage, Plastic, Ropes Cuts Light Metals, Rubber, Heavy Fabrics
Material Forged Steel Forged Steel Forged Steel
Cutting Length 1.75" (4.5 cm) 2" (5.1 cm) 2" (5.1 cm)
Overall Length 6.5" (16.5 cm) 8" (20.3 cm) 8.5" (21.6 cm)
Forged Steel
3" (7.6 cm)
9" (22.9 cm)
9RLFH'DWD9LGHR
22003
Description High-Leverage Snip Broad Blade Utility Shear Large Broad Blade Utility Shear
24000
3RZHU7RROV DQG$FFHVVRULHV
24001
Description High Leverage Kevlar® Snip Rapid Cutting Snip
Special Features Closure Lock, Serrated Blade, Spring-Loaded Closure Lock, Serrated Blade, Spring-Loaded
Application Fiberoptic (Cutting Kevlar® Insulation) Fiberoptic p (Cutting ( g Kevlar® Insulation);) Cuts Stranded Wire, Light Metal, Cordage
Material Steel Steel
Cutting Length 0.625" (1.6 cm) 1" (2.5 cm)
7HVWDQG 0HDVXUHPHQW
High-Leverage Kevlar® Snips • Nickel-chrome plating resists corrosion and rusting • Compatible for right- and left-handed users
Cat. No. 24000 24001
7RRO6WRUDJH
Cat. No. 22000 22001 22002
22003
Overall Length 6.5" (16.5 cm) 5" (12.7 cm)
Kevlar® is a registered trademark of E.I. du Pont de Nemours and Company.
59
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV
Bent Trimmers • Nickel-chrome plating resists corrosion and rusting
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
6FLVVRUV
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
23010
23015
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
23011
Cat. No. 23008
Description Bent Trimmer, 8" (20.3 cm)
Special Features Extended Handle
23010
Bent Trimmer, 10" (25.4 cm)
Extended Handle
23011
Bent Trimmer, 11-1/4" (28.6 cm)
Extended Handle
23015
Single Serrated Blunt Blade Shear
Extended Handle, Serrated Blade
Application Cuts Plastic, Rubber, Tar Paper, p Cording, Vinyl, Fiberglass Insulation and Cloth Materials Cuts Plastic, Rubber, Tar Paper, p Cording, Vinyl, Fiberglass Insulation and Cloth Materials Cuts Felt Lining, g Muslin, Cord, Rubber, Abrasive Materials and Multiple Layers of Fabric Cuts Belting, Heavy Fabric or Carpet, Leather, Upholstery
Material Metal
Cutting Length 3.5" (8.9 cm)
Overall Length 9" (22.9 cm)
Metal
4.5" (11.4 cm)
10.5" (26.7 cm)
Metal
4.75" (12.1 cm)
11.25" (28.6 cm)
Metal
3.188" (8.1 cm)
9.75" (24.8 cm)
Sharpening Tools Pocket-Sized Knife Sharpener • Versatile sharpener featuring fine craftsmanship and unique design rod unscrews and stores in handle for convenient • Sharpening carrying in tool box, pouch, or pocket rod is precision-cut, hard-chromed steel • Sharpening for accurate, consistent sharpening and long life PRODUCT SHOWN OPEN • Magnetized to trap metal particles when sharpening Handle is a high-visibility orange color • with handy pocket clip Cat. No. Blade Length 44151
3.75" (9.5 cm)
Combination Knife and Scissors Sharpener • High-grade, tungsten-carbide inserts sharpen both sides of the blade at the same time • Restores knife edge in three or four strokes • Built-in finger guard helps to protect your hand • Lightweight, compact size for easy carrying and storage electrician's scissors, pocket knives, retractable-blade utility knives, razor • Sharpens blade knives and serrated knives Cat. No. 48036
60
Overall Width 2.25" (5.7 cm)
Overall Length 4" (10.2 cm)
www.kleintools.com > 800-553-4676
PRODUCT SHOWN CLOSED
44151
Blade Material Steel
Handle Length 5.5" (14 cm)
Overall Width 0.5" (1.3 cm)
Overall Length 9.5" (24.1 cm)
48036
WARNING: Improper use of knife and scissors sharpener and/or failure to follow instructions can result in injuries. Keep your fingers behind the curved guard and your thumb securely on the multi-grooved thumb-rest indentation, never in front of it.
6WULSSHUV&XWWHUV DQG&ULPSHUV
HAND SAWS
3OLHUV
'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local law on legality of selling, possessing, or carrying these knives.
725
9RLFH'DWD9LGHR
Jab Saws • Cuts drywall, wallboard, plywood and plastic and other construction materials Faster cutting blade with triple ground teeth and • ability to cut in both directions (push and pull) Jab Saw (Cat. No. 31737) is as sturdy as fixed blade jab saws, with a • Folding lockback mechanism to secure the blade open at 125° and fully open at 180° • Hardened, carbon-steel blade for durability • Hardened, beveled blade point for scoring and plunge cuts • Comfort cushioned grip handle • Flat-end grip for palming or punching through drywall
7HVWDQG 0HDVXUHPHQW
Folding Jab Saw blade securely locks at 125° and 180 °
Description Folding Jab Saw Jab Saw
Blade Length 5.2" (13.2 cm) 6" (15.2 cm)
Overall Length 11.9" (30.3 cm) 12" (30.5 cm)
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 31737 725
Folding Jab Saw shown closed, prevents punctures to tool bags
61
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
High-Tension Hacksaw • Adjustable blade tension up to 30,000 PSI for fast, precise cuts • Soft-touch grips • Alternative 45° mounting for flush cutting • Front mount for reciprocating saw blades • Blade storage in handle 12" (30.5 cm) x 24 TPI bi-metal hack saw blade • Includes and 6" (15.24 cm) x 24 TPI bi-metal reciprocating saw blade Cat. No. 702-12
Teeth Per Inch 24
Blade Length 12" (30.5 cm)
Cat. No. 1218BI-P 1224BI-P 1232BI-P 1218BI 1224BI 1232BI
Teeth Per Inch 18 24 32 18 24 32
Package Quantity 10 10 10 100 100 100
7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Overall Length 16.25" (41.3 cm)
702-12
Bi-Metal Blades • Special high-speed steel teeth fused to carbon-steel body, which provides superior cutting and longer life • Withstands greater saw tension for less blade flexing • Fits all 12" (30.5 cm) hacksaws • Available in box of 100 blades or in a reclosable, heavy-vinyl, seal-tight pouch of 10 blades • Made in USA
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
+DQG6DZV
62
www.kleintools.com > 800-553-4676
Overall Length 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm)
1224BI
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
$ZOV :UHQFKHV +DPPHUV
3RZHU7RROV DQG$FFHVVRULHV
+H[.H\V
7HVWDQG 0HDVXUHPHQW
7DS7RROV
1XW'ULYHUV
9RLFH'DWD9LGHR
Klein's hand tools are forged from the finest steel, heat-treated and tempered, and designed to deliver great strength and long working life. Regardless of the task, Klein has a wide variety of wrenches, screwdrivers, hammer, or whichever hand tool that will help the professional complete the job.
0XOWL%LW6FUHZGULYHUV
7RRO6WRUDJH
DRIVERS AND WRENCHES
6FUHZGULYHUV
&KLVHOV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3XQFKHV
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
6FUHZGULYHUDQG1XW'ULYHUV Extra-quality features have made the Klein name famous for hand tools – features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability. All Klein drivers are made of the highest quality tempered steel and carefully heat-treated for maximum strength. Shafts have integral flanges that provide an extra-strong, torque-proof anchor in the handle. Strong, durable black tips are forged and precision ground with square edges to fit screw openings securely. They resist slippage and provide positive turning action. Cushion-Grip screwdrivers feature super-comfortable, sure-grip handles on top-quality blades for the professional. All Klein screwdrivers meet or exceed applicable ANSI and MIL specifications.
6DIHW\33( DQG&RPIRUW
Combo Recess
Square
TORX®
Hex
4. Never use a driver at an angle to the screw.
1. Never use a driver to do another tool's job.
5. Never depend on a driver's handle or covered blade to insulate you from electricity. Plastic and Cushion-Grip handles are intended only to provide a
Using a driver as a pry bar, scraper, or a chisel can ruin the tool, spoil the work and cause injury.
Make a pilot hole for the screw for easier driving. Use square-shank drivers for heavy work. 3. Never expose a driver to excessive heat. Direct flame can draw the temper from the metal, weakening and possibly warping it, making it unsafe and inefficient to use.
-REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR
Phillips
The size of the screw or nut and the type of opening it has determines which driver to use. Here are a few tips on how to use a driver that can be of benefit, because screwdrivers are the most often misused and abused hand tools of all.
Always keep the shank perpendicular to the screw head. Driving at an angle or using a point that is too small can spoil the screw or slip and damage the work.
firm, comfortable grip. Insulated blades are intended only as a protective measure against shorting out components. Only use insulated tools that are marked with the official international 1000-volt rating symbol if there is any chance that the tool will make contact with an energized source.
6. Discard damaged or worn drivers.
TORX® is a registered trademark of Acument Intellectual Properties, LLC.
Fits these drivers
Quickly magnetize and demagnetize screwdriver tips and bits using powerful Rare-Earth magnets
To magnetize screwdriver: Insert screwdriver shaft fully into magnetizing slot; avoid rotating shaft while drawing out slowly
To demagnetize screwdriver: Insert shaft fully into smallest demagnetizing slot that fits; avoid rotating shaft while drawing out slowly
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
Cabinet
USING SCREWDRIVERS AND NUT DRIVERS
2. Never push a driver beyond its capacity.
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Keystone
Cat. No. MAG2
Overall Length 2.203" (5.6 cm)
Overall Height 0.703" (1.8 cm)
Overall Width 1.094" (2.8 cm)
Weight 1.1 oz (32 g)
• #3 Phillips • 1/4" Keystone (round or square shank) • 5/16" Cabinet • #2 Phillips Insulated • 1/4" Cabinet Insulated • Most precision screwdrivers
6WULSSHUV&XWWHUV DQG&ULPSHUV
'ULYHUVDQG :UHQFKHV
&RQGXLW7RROV DQG0HDVXUHPHQW
7RRO.LWV
6DIHW\33( DQG&RPIRUW
-REVLWH $FFHVVRULHV
7RRO6WRUDJH
9RLFH'DWD9LGHR
SCREWDRIVERS
3OLHUV
7HVWDQG 0HDVXUHPHQW
3RZHU7RROV DQG$FFHVVRULHV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3OLHUV
Heat-treated, premium chromeplated shank for smooth feel and corrosion resistance Precision-machined tip for exact fit
&RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Tip-Ident® quickly identifies the type of screwdriver and tip orientation
Meet or exceed applicable ASME / ANSI specifications
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Cushion-Grip Screwdrivers
Integral flanges inside handle provide solid, twist-resistant blade anchor
Cushion-Grip handle allows for greater torque and comfort
Color-Coded Cushion-Grip Screwdrivers and Sets
660
Includes core Cushion-Grip Screwdriver features plus: Color-coded handle ends for quick and easy identification TORX® tip drive cuts slippage, saves fasteners and transmits more torque to the work
• •
Cat. No. 660 661 661-4-INS 661-7-INS 662 662-4-INS 662-7-INS 663 665 666 667 668 19542 19543 19544 19545 19546
661-4-INS
Tip Type #0 Square-Recess #1 Square-Recess #1 Square #1 Square #2 Square-Recess #2 Square #2 Square #3 Square-Recess #1 Square-Recess #2 Square-Recess #3 Square-Recess #1 Square-Recess T15 TORX® T20 TORX® T25 TORX® T27 TORX® T30 TORX®
Shank Type Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round
Insulated No No Yes Yes No Yes Yes No No No No No No No No No No
Shank Length 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 7" (17.8 cm) 4" (10.2 cm) 4" (10.2 cm) 7" (17.8 cm) 4" (10.2 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 1.5" (3.8 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
Color Code Yellow Green Green Green Red Red Red Black Green Red Black Green Yellow Green Blue Brown Red
Overall Length 7.75" (19.7 cm) 7.75" (19.7 cm) 8.313" (21.1 cm) 11.313" (28.7 cm) 8.25" (21 cm) 8.313" (21.1 cm) 11.313" (28.7 cm) 8.25" (21 cm) 11.75" (29.9 cm) 12.25" (31.1 cm) 12.25" (31.1 cm) 3.438" (8.7 cm) 8.313" (21.1 cm) 8.313" (21.1 cm) 8.313" (21.1 cm) 8.313" (21.1 cm) 8.313" (21.1 cm)
Cushion-Grip Screwdriver Sets 19555 5-Pc 85664 4-Pc — — — — — — — — — — — — — — — — — — — — — — — — —
TORX® is a registered trademark of Acument Intellectual Properties, LLC.
Miniature Screwdrivers and Sets 608-6
607-3-INS
Cat. No. 604-3 606-2 607-3 607-3-INS 607-4 608-3 608-4 608-6 608-8 608-10
66
Tip Type #0 Phillips 1/16" (1.6 mm) Keystone 3/32" (2.4 mm) Cabinet 3/32" (2.4 mm) Cabinet 3/32" (2.4 mm) Cabinet 1/8" (3.2 mm) Cabinet 1/8" (3.2 mm) Cabinet 1/8" (3.2 mm) Cabinet 1/8" (3.2 mm) Cabinet 1/8" (3.2 mm) Cabinet
Shank Type Round Round Round Round Round Round Round Round Round Round
www.kleintools.com > 800-553-4676
Insulated No No No Yes No No No No No No
Shank Length 3" (7.6 cm) 2" (5.1 cm) 3" (7.6 cm) 3" (7.6 cm) 4" (10.2 cm) 3" (7.6 cm) 4" (10.2 cm) 6" (15.2 cm) 8" (20.3 cm) 10" (25.4 cm)
Overall Length 5.75" (14.6 cm) 4.75" (12.1 cm) 5.75" (14.6 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 5.75" (14.6 cm) 6.75" (17.2 cm) 8.75" (22.2 cm) 10.75" (27.3 cm) 12.75" (32.4 cm)
Cushion-Grip Screwdriver Sets 85484 4-Pc
— — — — — —
3OLHUV
6FUHZGULYHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Cushion-Grip Screwdrivers and Sets Includes core Cushion-Grip Screwdriver features plus: Narrow cabinet-tip permits blade access where space is limited 602-6 Precision machined combo-tip designed for combination head screws Precision machined Phillips tip provides a more consistent geometric symmetry than conventional Phillips screwdrivers to ensure accurate fit and torque without slippage Heavy-duty square shank and hex bolster allows wrench-assisted turning 601-6 Bolster reinforces shank for hard use
&RQGXLW7RROV DQG0HDVXUHPHQW
601-4
'ULYHUVDQG :UHQFKHV
• • • • •
600-4
600-1
Cushion-Grip Screwdriver Sets
No Yes No No No
4" (10.2 cm) 7" (17.8 cm) 6" (15.2 cm) 8" (20.3 cm) 10" (25.4 cm)
8.344" (21.2 cm) 11.313" (28.7 cm) 10.344" (26.3 cm) 12.344" (31.4 cm) 14.344" (36.4 cm)
— — — — —
— — — — —
— — — — —
— — — — —
— — — —
Square Square Square Square Round
No No No No Yes
4" (10.2 cm) 6" (15.2 cm) 8" (20.3 cm) 12" (30.5 cm) 4" (10.2 cm)
8.344" (21.2 cm) 10.938" (27.8 cm) 13.438" (34.1 cm) 17.438" (44.3 cm) 7.75" (19.7 cm)
— — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — —
Round Round Round Round Round Round Round Round Round
No No Yes No Yes No Yes No No
3" (7.6 cm) 4" (10.2 cm) 4" (10.2 cm) 6" (15.2 cm) 7" (17.8 cm) 8" (20.3 cm) 8" (20.3 cm) 10" (25.4 cm) 12" (30.5 cm)
6.75" (17.2 cm) 8.344" (21.2 cm) 8.313" (21.1 cm) 10.938" (27.8 cm) 12.375" (31.4 cm) 13.438" (34.1 cm) 13.375" (34 cm) 15.438" (39.2 cm) 17.438" (44.3 cm)
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
33528 33532-INS 85105 9-Pc 2-Pc 4-Pc Insulated Insulated — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Heavy-Duty
1/4" 1/4" 1/4" 1/4" 1/4"
(6.4 mm) Cabinet (6.4 mm) Cabinet (6.4 mm) Cabinet (6.4 mm) Cabinet (6.4 mm) Cabinet
— — — — —
— — — —
— — — —
— — — — —
— — — —
— — — —
— — — —
— — —
— — —
— — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — —
— — — — —
— —
— —
—
— — — — — —
9RLFH'DWD9LGHR
605-4 605-7-INS 605-6 605-8 605-10
Heavy-Duty with Bolster
1/4" (6.4 mm) Keystone 5/16" (7.9 mm) Keystone 3/8" (9.5 mm) Keystone 1/2" (12.7 mm) Keystone 1/8" (3.2 mm) Cabinet
— — —
7HVWDQG 0HDVXUHPHQW
600-4 600-6 600-8 600-12 612-4-INS
Heavy-Duty with Hex Bolster
7/32" (5.6 mm) Keystone 1/4" (6.4 mm) Keystone 1/4" (6.4 mm) Cabinet 5/16" (7.9 mm) Keystone 5/16" (7.9 mm) Cabinet 3/8" (9.5 mm) Keystone 3/8" (9.5 mm) Cabinet 3/8" (9.5 mm) Keystone 3/8" (9.5 mm) Keystone
— — — — — — — — —
— — —
67
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
602-3 602-4 602-4-INS 602-6 602-7-INS 602-8 602-8-INS 602-10 602-12
7RRO6WRUDJH
Round Round Round Round Round
85442 85742 32378 85071 85072 85074 85075 85076 85078 2-Pc 2-Pc 2-Pc 2-Pc 2-Pc 6-Pc 5-Pc 7-Pc 8-Pc — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
-REVLWH $FFHVVRULHV
5/16" (7.9 mm) Cabinet 3/16" (4.8 mm) Cabinet 3/16" (4.8 mm) Cabinet 3/16" (4.8 mm) Cabinet 3/16" (4.8 mm) Cabinet 3/16" (4.8 mm) Cabinet 3/16" (4.8 mm) Cabinet 3/16" (4.8 mm) Cabinet #1 Combo #2 Combo #2 Phillips #1 Phillips #1 Phillips #2 Phillips #2 Phillips #3 Phillips #3 Phillips #2 Phillips #2 Phillips #2 Phillips
Overall Length 3.438" (8.7 cm) 6.75" (17.2 cm) 7.75" (19.7 cm) 7.75" (19.7 cm) 9.75" (24.8 cm) 10.75" (27.3 cm) 11.75" (29.9 cm) 13.75" (34.9 cm) 8.344" (21.2 cm) 8.344" (21.2 cm) 3.438" (8.7 cm) 6.75" (17.2 cm) 7.75" (19.7 cm) 8.25" (21 cm) 8.313" (21.1 cm) 11" (27.9 cm) 12.375" (31.4 cm) 11.313" (28.7 cm) 11.313" (28.7 cm) 14.313" (36.4 cm)
6DIHW\33( DQG&RPIRUW
600-1 601-3 601-4 601-4-INS 601-6 601-7-INS 601-8 601-10 7314 7324 603-1 603-3 6334INS 603-4 603-4-INS 603-6 6337INS 603-7 6037INS 603-10
Shank Insulated Shank Type Length Round No 1.5" (3.8 cm) Round No 3" (7.6 cm) Round No 4" (10.2 cm) Round Yes 4" (10.2 cm) Round No 6" (15.2 cm) Round Yes 7" (17.8 cm) Round No 8" (20.3 cm) Round No 10" (25.4 cm) Round No 4" (10.2 cm) Round No 4" (10.2 cm) Round No 1.5" (3.8 cm) Round No 3" (7.6 cm) Round Yes 4" (10.2 cm) Round No 4" (10.2 cm) Round Yes 4" (10.2 cm) Round No 6" (15.2 cm) Round Yes 7" (17.8 cm) Round No 7" (17.8 cm) Round Yes 7" (17.8 cm) Round No 10" (25.4 cm)
7RRO.LWV
Cat. No. Tip Type
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
6FUHZGULYHUV Insulated Slim-Tip Screwdrivers Includes core Cushion-Grip Screwdriver features plus:
• Clearly marked with the official 1000-Volt rating symbol • Slim tip that allows for greater access into tight spaces sits flush with the tip helping to reduce insulation • Tip chipping and cracking • Available individually and in a variety of sets • Meets or exceeds ASTM F-1505-16 and IEC 60900:2018 6916INS
Cat. No. 6916INS
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
6924INS 6946INS
Tip Type 3/16" Cabinet
Shank Type Round
Shank Length 6" (15.2 cm)
Overall Length 10.31" (26 cm)
6924INS
1/4" Cabinet
Round
4" (10.2 cm)
8.31" (21 cm)
6926INS 6956INS
1/4" Cabinet #1 Phillips
Round Round
6" (15.2 cm) 6" (15.2 cm)
10.31" (26 cm) 10.31" (26 cm)
#2 Phillips #2 Phillips #1 Square #1 Square #2 Square #2 Square
Round Round Round Round Round Round
6934INS 6936INS 6984INS 6986INS 6944INS 6946INS MAG2
6934INS
4" (10.2 cm) 6" (15.2 cm) 4" (10.2 cm) 6" (15.2 cm) 4" (10.2 cm) 6" (15.2 cm) Magnetizer/ Demagnetizer
8.31" (21 cm) 10.31" (26 cm) 8.31" (21 cm) 10.31" (26 cm) 8.31" (21 cm) 10.31" (26 cm)
Insulated Slim-Tip Screwdrivers Sets 33732INS 33734INS 33736INS 2-Pc Insulated 4-Pc Insulated 6-Pc Insulated
— • — — • — — — — — —
• • — — • — — — — • —
• • — • • — — — — • •
Demolition Screwdrivers and Sets Includes core Cushion-Grip Screwdriver features plus: Engineered, manufactured and tested for prying, chiseling and punching Plated metal strike cap to protect handle from hammer blows Heat treated metal shaft runs complete length of handle to metal strike cap to transfer metal strike force
• • •
Cat. No. 602-4DD 602-7DD 6034DD
Tip Type 1/4" (6.4 mm) Cabinet 5/16" (7.9 mm) Keystone #2 Phillips
Shank Type Round Round Round
Shank Length 4" (10.2 cm) 7" (17.8 cm) 4" (10.2 cm)
Overall Length 9" (22.9 cm) 12.375" (31.4 cm) 9" (22.9 cm)
Rapi-Driv™ Screwdrivers • Crank-action handle spins screws fast with one hand • Saves time and effort, especially on long-threaded screws in switch plates, light fixtures, etc. • Cat. No. 67100 has an interchangeable bit holder allows quick switching between tip styles and works with other standard size bits
Cat. No. 670-3 670-6 671-6 682-6 67100
68
Tip Type 3/16" (4.8 mm) Cabinet 3/16" (4.8 mm) Cabinet 1/4" (6.4 mm) Cabinet #2 Phillips #2 Phillips, 3/16" (4.8 mm) Slotted"
Shank Type Round Rapi-Driv® Round Rapi-Driv® Round Rapi-Driv® Round Rapi-Driv® Round Rapi-Driv®
www.kleintools.com > 800-553-4676
Shank Length 4" (10.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm)
Overall Length 7.75" (19.7 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm)
602-7DD
Cushion-Grip Screwdriver Sets 32008 2-Pc —
67100
670-6
3OLHUV
6FUHZGULYHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
7-Piece Multiple-Application Screwdriver Set • Specialty set for a wide variety of applications • Features Rapi-Driv and screw-holding screwdrivers ™
'ULYHUVDQG :UHQFKHV
Cat. No. 85077
Set Contains Screwdriver Set, Multi-Application, 7-Piece Tip Type
Shank Type
Shank Length
Overall Length
600-4 602-6 601-6 605-6 670-6 K36 603-4
Keystone Keystone Cabinet Cabinet Cabinet Screw Holding Phillips
Square Round Round Round Round Rapi-Driv® Round Round
4" 6" 6" 6" 6" 6" 4"
8.344" (21.2 cm) 10.938" (27.8 cm) 9.75" (24.8 cm) 10.344" (26.3 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 8.25" (21 cm)
(10.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (10.2 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No.
6DIHW\33( DQG&RPIRUW
Wire Bending Screwdrivers
7RRO.LWV
85077
Includes core Cushion-Grip Screwdriver features plus: Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches
•
605-6B
Bends AWG Gauges Nos. 10, 12, 14 AWG Gauges Nos. 10, 12, 14 AWG Gauges Nos. 10, 12, 14
Tip Type 1/4" (6.4 mm) Cabinet 1/4" (6.4 mm) Cabinet #2 Phillips
Shank Type Round Round Round
Shank Length 4" (10.2 cm) 6" (15.2 cm) 4" (10.2 cm)
-REVLWH $FFHVVRULHV
Cat. No. 605-4B 605-6B 603-4B
Overall Length 8.344" (21.2 cm) 10.344" (26.3 cm) 8.313" (21.1 cm)
7RRO6WRUDJH
Screw-Holding Screwdrivers • Starts and drives screws with one hand when working in hard-to-reach spaces 32215
Tip Type 1/4" (6.4 mm) Cabinet #2 Phillips
Shank Type Round Round
Shank Length 7" (17.8 cm) 7" (17.8 cm)
9RLFH'DWD9LGHR
Cat. No. 32215 32216
Overall Length 11.25" (28.6 cm) 11.25" (28.6 cm)
7HVWDQG 0HDVXUHPHQW
Terminal Block Screwdriver Includes core Cushion-Grip Screwdriver features plus: Provides exact fit for terminal block screws Tip is up to 19% stronger than competitors and provides 76% higher torque value than the required ASME B107 Standard
• •
Cat. No. 612-4
Tip Type 1/8" (3.2 mm) Cabinet
Shank Type Round
Shank Length 4" (10.2 cm)
Overall Length 7.75" (19.7 cm)
69
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
612-4
SCREWDRIVERS
MULTI-BIT
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
Multi-Bit Screwdriver/Nut Drivers • Integrated screwdriver/nut driver shaft holds popular tips and converts nut driver sizes • Cat. No. 32500MAG features strong, Rare-Earth magnets to securely hold bits and fasteners No. 32527 includes unique style bit for installation/removal of common TR-4 Schrader • Cat. valves and aggressive thread extractor tip for backing out broken cores which is great for HVAC and other industrial applications
Nos. 32561 and 32562 compact design features standard 1-1/4" (3.2 cm) shaft allowing • Cat. easy access to tight work spaces • Cat. No. 32559 and 32560 have extended shafts and blades to provide 39% longer reach
32500MAG
Cat. No.
Description
32500 11-in-1 32500MAG 11-in-1 Magnetic 32527 11-in-1 w/Schrader® 32476 5-in-1 32477 10-in-1 32557 10-in-1 Heavy Duty 32559 6-in-1 Extended Reach 32560 6-in-1 Extended Reach 32561 6-in-1 Stubby 32562 6-in-1 Stubby
Nut Driver Sizes 3/8", 5/16", 1/4" 3/8", 5/16", 1/4" 3/8", 5/16", 1/4"
Phillips Bits #1, #2 #1, #2 #1, #2
Slotted Square Bits Bits 1/4" (6.4 mm), 3/16" (4.8 mm) #1, #2 1/4" (6.4 mm), 3/16" (4.8 mm) #1, #2 1/4" (6.4 mm), 3/16" (4.8 mm) #1, #2
Hex Bits — — —
5/16" 5/16", 1/4" 1/4", 5/16", 3/8" 1/4", 5/16" 1/4", 5/16" 1/4", 5/16" 1/4", 5/16"
#1, #2 #1, #2 #1, #2 #1, #2 #2 #1, #2 #2
1/4" (6.4 mm), 3/16" (4.8 mm) 1/4" (6.4 mm), 3/16" (4.8 mm) 1/4" (6.4 mm), 3/16" (4.8 mm) 1/4" (6.4 mm), 3/16" (4.8 mm) 1/4" (6.4 mm) 1/4" (6.4 mm), 3/16” (4.8 mm) 3/16" (4.8 mm)
— — 3/8" — — — —
TORX® is a registered trademark of Acument Intellectual Properties, LLC. Schrader® is a registered trademark of Schrader International, Inc.
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
®
70
www.kleintools.com > 800-553-4676
— #1, #2 #1, #2 — #1, #2 — #1, #2
32561
TORX® Bits T10, T15 T10, T15 — — T10, T15 — — — — —
32557
Other Bits — — Schrader® Valve Insertion, Core Removal — — — — — — —
32476
32559
Shank Length 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm)
Overall Length 7.25" (18.4 cm) 7.8" (19.8 cm) 7.75" (19.7 cm)
4" (10.2 cm) 4" (10.2 cm) 2.953" (7.5 cm) 4.109" (10.4 cm) 4.109" (10.4 cm) 1.266" (3.2 cm) 1.266" (3.2 cm)
7.75" (19.7 cm) 7.75" (19.7 cm) 7.891" (20 cm) 9.109" (23.1 cm) 10" (25.4 cm) 3.25" (8.3 cm) 3.406" (8.7 cm)
3OLHUV
0XOWL%LW6FUHZGULYHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Multi-Bit Screwdrivers • On-board storage of industrial strength bits Stainless steel bit holders contain powerful Rare-Earth magnets for securing • bits and fasteners (Cat. No. 32303, 32308) • Spin caps for optimum and precise control • Cushion-Grip handles for greater torque and maximum control • Available in adjustable length and ratcheting models • Collar on Cat. No. 32305 sets ratchet direction at forward, fixed and review rated blades can be removed for use with an impact drill • Impact (Cat. No. 32303, 32304, 32308)
'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW
32307 32305 Cat. No. 32303, 32304, 32308
Cat. No.
Description
Nut Driver Sizes
32304
14-in-1 HVAC Adjustable j Length with Flip Socket 1/4", 5/16"
32308
8-in-1 Adjustable Length 1/4" Stubby
32305
15-in-1 Ratcheting
32307
27-in-1 Tamperproof
1/4" 1/4"
—
—
Square Bits
Combo Bits
TORX® Bits
Other Bits
Shank Length
#1, #2
#2
T10, T15, T20, T25
—
1" to 4" (2.5 to 10.1 cm) 9.73" (25 cm)
#2
—
'T10, T15
#2 JIS Bit, Schrader Valve Insertion Bit, and Core Removal Bit
1" to 4" (2.5 to 10.1 cm) 9.73" (25 cm)
#1, #2
—
—
—
1" to 2.75" (2.5 to 7 cm) 4.81" (12.2 cm)
#1, #2
#1, #2
T10, T15, T20, T25
—
—
—
Tamperproof: p p T7, T8, T10, T15, T20, T25, T27, T30, T40
Overall Length
3.5" (8.9 cm)
8.7" (22 cm)
®
TORQ-SET : TS6, TS8, TS10; Tamperproof p p Spanner: 3.38" (8.6 cm) SP4, SP6, SP8, SP10
8.5" (22 cm)
6DIHW\33( DQG&RPIRUW
14-in-1 Adjustable Length 1/4"
Slotted Bits ((4.8 mm), #0, #1, #2, #3 3/16" 1/4" (6.4 mm) 1/8" ((3.2 mm),) #0, #1, #2 3/16" ((4.8 mm), 1/4" (6.4 mm) 3/16" ((4.8 mm), #1, #2, #3 1/4" (6.4 mm) ((4.8 mm), #0, #1, #2, #3 3/16" 1/4" (6.4 mm)
7RRO.LWV
32303
Phillips Bits
*TORQ-SET® is a registered trademark of Phillips Screw Co; TORX® is a registered trademark of Acument Intellectual Properties, LLC.
-REVLWH $FFHVVRULHV
Ratcheting Multi-Bit Screwdriver/Nut Drivers torque 3-way ratcheting mechanism: forward, reverse and locked • High positions for tough applications shaft holds six universal tips; • Interchangeable converts to three nut driver sizes and one hex driver • Strong, heat-treated nut drivers for improved torque Cat. No. 32593 32594
Description 6-in-1 Ratcheting Stubby 6-in-1 Ratcheting Stubby
Nut Driver Sizes 1/4", 5/16" 1/4", 5/16"
Phillips Bits #1, #2 #2
Slotted Bits 1/4" (6.4 mm), 3/16" (4.8 mm) 3/16" (4.8 mm)
32751
8"
4"
Shank Length 4" to 8" (10.2 to 20.3 cm) 4" to 8" (10.2 to 20.3 cm) 7.75" (19.7 cm) 7.75" (19.7 cm) 4" to 8" (10.2 to 20.3 cm) —
Additional bits and replacement bits can be found on page 75
Overall Length 13.375" (34 cm) 13.375" (34 cm) 9" (22.9 cm) 9" (22.9 cm) 9.125" (23.2 cm) 5.375" (13.7 cm)
Adjustable-Length Screwdriver Set 32715 3-Pc — —
—
www.kleintools.com > 800-553-4676
71
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Tip Size #2 Phillips, 1/4" (6.4 mm) Slotted #1, #2 Square #1, #2 Square #1 Phillips, 3/16" (4.8 mm) Slotted #2 Phillips, 1/4" (6.4 mm) Slotted —
Overall Length 3.5" (8.9 cm) 3.5" (8.9 cm)
3RZHU7RROV DQG$FFHVVRULHV
Description Adjustable-Length Screwdriver Adjustable-Length Screwdriver Replacement Blade Replacement Blade Replacement Blade Screwdriver Handle
Shank Length 1.297" (3.3 cm) 1.297" (3.3 cm)
7HVWDQG 0HDVXUHPHQW
Cat. No. 32751 32708 32709 32713 32618 32619
Hex Bits — —
9RLFH'DWD9LGHR
Adjustable-Length Screwdrivers Removable shank adjusts within 4" to 8" (10 to 21 cm) range • for numerous length combinations Blades feature two tips for multiple screwdrivers in one tool • Proprietary system securely holds blade - as durable as a • traditional Klein fixed blade screwdriver • Press down to extend or lengthen the shank • Push up to retract or shorten the shank
Square Bits — #1, #2
32594
7RRO6WRUDJH
32593
3OLHUV
10-in-1 Folding Screwdriver/Nut Driver • Conveniently folds up for easy storage or to fit into your pocket • Each driver arm contains four interchangeable bit styles and two nut drivers each driver arm up to a full 180° for straight on driving power, or at • Unfold 90° for extra leverage on stubborn fasteners • Quick release button easily unlocks a fully extended driver arm 32534 Schrader®
32535 Standard
32535
32536 TORX®
32537 Tamperproof TORX®
TORX® Bits —
Cat. No. Nut Driver Sizes 32534 5/16", 1/4"
Phillips Bits #1, #2
Slotted Square Bits Bits 3/16" (4.8 mm), 1/4" (6.4 mm) #1, #2
32535 32536
5/16", 1/4" 5/16", 1/4"
#1, #2 —
3/16" (4.8 mm), 1/4" (6.4 mm) #1, #2 — —
32537
5/16", 1/4"
—
—
—
—
32538
5/16", 1/4"
—
—
—
32539
5/16", 1/4"
—
—
—
1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm
Hex Bits — — —
T10, T15 T6, T7, T8, T10, T15, T20, T25, T27 T7, T8, T9, T10, T15, T20, T25, T27 — —
32538 Standard Hex
32539 Metric Hex
Other Bits Schrader® Valve Core Removal/Installation - Extractor — —
Handle Overall Color Length Blue 8.75" (22.2 cm) Black Green
9.594" (24.4 cm) 9.75" (24.8 cm)
—
Green
9.594" (24.4 cm)
—
Red
9.594" (24.4 cm)
—
Blue
9.75" (24.8 cm)
SCREWDRIVERS
Schrader® is a registered trademark of Schrader-Bridgeport International, Inc., TORX® is a registered trademark of Acument Intellectual Properties, LLC.
PRECISION
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
0XOWL%LW6FUHZGULYHUV
Spin cap offers optimum and precise control Cushion-Grip handle for maximum comfort and torque
Industrial-strength heat treated bits
All-in-1 Precision Screwdriver Set with Case Includes core Precision Screwdriver features plus: screwdriver set includes 39 bits for various applications including • Precision repair of most Apple products • Compact case with a stay-shut latch • Powerful magnets inside barrel to better retain bits, as well as pick up and hold fasteners • Reversible barrel has standard and extended reach ends ®
Cat. No. 32717
Phillips Bits #000, #00, #0, #1, #2
Slotted Bits 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm
Square Bits Hex Bits #1, #2 0.9 mm, 1.3 mm, 1.5 mm, Tamperproof: p p 2 mm, 2.5 mm, 3 mm, 3.5 mm
TORX® Bits T3, T4, Tamperproof: p p T5, T6, T7, T8, T9, T10, T15
32717
Other Bits Triangle: g #2, #3; Pentalope: p P2, P5; Tri-Wingg®: Y000, Y0, Y1; Stand Off; Spanner: #4, #6
Shank Length Standard: 2" ((5.1 cm)) Extended: 4" (10.2 cm)
*Apple® is registered trademarks of Apple Inc; TORX® is a registered trademark of Acument Intellectual Properties, LLC; Tri-Wing® is a registered trademark of Phillips Screw Company.
72
www.kleintools.com > 800-553-4676
Additional bits and replacement bits can be found on page 75
Overall Length 6.35" (16.1 cm)
3OLHUV
3UHFLVLRQ6FUHZGULYHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
14-in-1 Precision Screwdriver/Nut Driver Includes core Precision Screwdriver features plus:
32314 Cat. No. 32314
Nut Driver Sizes 9/64", 5/32", 3/16", 7/32", 1/4", 5/16"
Phillips Bits #00, #0
®
Slotted Bits 3/32" (2.4 mm), 1/8" (3.2 mm)
TORX Bits Tamperproof TT7, TT8, TT10, TT15
Shank Length 3.1" (7.9 cm)
Overall Length 7" (17.8 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
TORX® is a registered trademark of Acument Intellectual Properties, LLC.
27-in-1 Precision Multi-Bit Screwdriver Includes core Precision Screwdriver features plus:
• Double-sided bits conveniently housed in the handle eliminating the need for a bulky bit block • Barrel contains powerful Rare-Earth magnets for securing bits and fasteners • Stainless steel barrel provides great impact and wear resistance • Cat. No. 3238 includes bits for repair of most Apple products
32328
7RRO.LWV
®
Cat. No. 32327
Phillips Bits #000, #00, #0, #1, #2
Slotted Bits 1, 2, 2.5, 3, 3.5
#000, #00, #0, #1, #2 Pentalobe
1, 2, 2.5, 3, 3.5
TORX® Bits TORX Securityy T3, T4; TORX T5H, T6H, T7H, T8H, T9H, T10H, T15H TORX Securityy T3, T4, T5H, T6H, T7H, T8H, T9H, T10H, T15H
Other Bits 0.9, 1.3, 1.5, 2, 2.5, 3, 3.5 mm Hex Security, Pentalobe 0.9, , 1.3, 1.5, 2, 2.5, 3, 3.5 mm
Shank Length 6.35" (16.1 cm)
Overall Length 8.75" (22 cm)
6.35" (16.1 cm)
8.75" (22 cm)
6DIHW\33( DQG&RPIRUW
32328
Description 27-in-1 Tamperproof 27-in-1 Tech
TORX® is a registered trademark of Acument Intellectual Properties, LLC. Apple® is a trademark of Apple, Inc.
Includes core Precision Screwdriver features plus:
• Featuring multiple precision bits in one tool • Cat. Nos. 32613 and 32614 have concealable tips and a pocket clip for easy pocket storage
32581
32585 32613
4-in-1 TORX® 3-in-1 HVAC Pocket
32614
4-in-1 Pocket
Phillips Bits #0, #00 — #0 #0, #00
Slotted Bits 1/8" ((3.2 mm),) 3/32" (2.4 mm) — 1/8" (3.2 mm)
TORX Bits —
Other Bits
Shank Length 2.797" (7.1 cm)
T7, T8, T10, T15 —
3/32" (0.2 ( cm), 1/8" (0.3 cm)
—
— Schrader® Valve Insertion/Core Removal —
—
Overall Length 6.5" (16.5 cm)
2.797" (7.1 cm) 6.5" (16.5 cm) Longg 2.09" (5.3 ( cm),) 6.625" (16.8 cm) Short 0.34" (0.9 cm) Longg 2.09" (5.3 ( cm),) 6.625" (16.8 cm) Short 0.34" (0.9 cm)
TORX® is a registered trademark of Acument Intellectual Properties, LLC. Schrader® is a registered trademark of Schrader-Bridgeport International, Inc.
7HVWDQG 0HDVXUHPHQW
Precision Screwdrivers and Sets Includes core Precision Screwdriver features plus:
• Rotating cap for optimum and precise control Slotted Bits — 1/16" (1.59 mm) Cabinet 3/32" (2.4 mm) Cabinet 1/8" (3.2 mm) Cabinet 1/8" (3.2 mm) Cabinet
TORX® Bits — — — — —
Other Bits — — — — —
Shank Length 3" (7.6 cm) 2" (5.1 cm) 3" (7.6 cm) 4" (10.2 cm) 6" (15.2 cm)
Overall Length 6.5" (16.5 cm) 5.5" (14 cm) 6.5" (16.5 cm) 7.5" (19.1 cm) 9.5" (24.1 cm)
Precision Screwdriver Sets 85614 5-Pc 85613 4-Pc
www.kleintools.com > 800-553-4676
73
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Phillips Bits #0 — — — —
614-6
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 613-3 614-2 614-3 614-4 614-6
9RLFH'DWD9LGHR
Description 4-in-1
7RRO6WRUDJH
32614 ®
-REVLWH $FFHVVRULHV
Multi-Bit Precision Screwdrivers
Cat. No. 32581
'ULYHUVDQG :UHQFKHV
screwdriver and integrated nut drivers include 14 of the • Precision most common sizes in one tool • Interchangeable steel shaft for fast, easy bit changes • Sizes are etched into integrated barrels and bits
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
Interchangeable Insulated Screwdrivers • Securely and easily release the blade with a quick twist of the lock collar • Interchangeable blades with a slim-tip to fit tight terminal blocks • Handle and blade have a 1000-Volt insulation rating layer of orange impact and flame resistant insulation protects • Afrom electric shock • Meets or exceeds ASTM F1505 standards for insulation
Cat. No. 32286 32287 32293 13156 13157
Description Insulated Flip-Blade Insulated Flip-Blade Insulated Flip-Blade Single-Ended Replacement Blade, 2-Pack Double-Ended Replacement Blade, 3-Pack
32286
TWIST FOR A
FAST, EASY
6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR
Shank Length 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm)
Interchangeable Screwdriver Set 32288 5-Pc — — —
Overall Length 8.2" (20.8 cm) 8.2" (20.8 cm) 8.2" (20.8 cm) 7.58" (19.3 cm) 7.48" (19.0 cm)
Set includes handle and carrying pouch.
Slide Drive™ Screwdriver/Nut Driver • Unique, patented Slide Drive tip switches from 1/4" size to 5/16" size • Magnetic regardless of which driver is selected • Twist the thumb nut to lock tip setting • U.S. Patent 7,654,175 B2
1/4"
™
7HVWDQG 0HDVXUHPHQW
BLADE CHANGE
32288
Tip Size #1 Phillips & 3/16" (4.8 mm) Slotted #1, #2 Square #2 Phillips & 1/4" (6.4 mm) Slotted #2 Phillips & 1/4" (6.4 mm) Slotted #1 Phillips p & 3/16" ((4.8 mm)) Slotted, #2 Phillips p & 1/4" (6.4 mm) Slotted, #1, #2 Square
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
0XOWL%LW6FUHZGULYHUV
5/16"
32596
Cat. No. 65129 65131 32596
Nut Driver Sizes 1/4" Magnetic, 5/16" Magnetic 1/4" Magnetic, 5/16" Magnetic 1/4" Magnetic, 5/16" Magnetic, 1/4", 3/8" Hollow
Phillips Bits — — #2
65129
Slotted Bits — — 1/8" (3.2 mm), 1/4" (6.4 mm)
Other Bits
Shank Length 6" (15.2 cm) 1.5" (3.8 cm) 3.25" (8.3 cm)
— — Schrader® Valve Insertion/Core Removal
Overall Length 10.25" (26 cm) 3.359" (8.5 cm) 7.5" (19.1 cm)
Schrader® is a registered trademark of Schrader-Bridgeport International, Inc.
Magnetic Screwdriver with 32-Piece Tamperproof Bit Set bit and screw holding magnet allows for • Sturdy screws to fit securely in place for easy use • Durable PVC black block allows for easy storage of standard 1/4" bits • Includes complete tamperproof bit set in block Cat. No. 32510
Nut Driver Sizes 1/4"
Phillips Bits —
Slotted Bits —
Square Bits —
Phillips Bits #0, #1, #2, #3 —
Slotted Bits 3-4, 5-6, 6-8, 8-10, 10-12, 12-14 Screw Sizes —
32510
TAMPERPROOF BIT SET INCLUDED WITH SET, ALSO SOLD SEPARATELY
STANDARD BIT SET SOLD SEPARATELY
32525
32526
Hex Bits 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm
TORX® Bits T7, T8, T10, T15, T20, T25, T27, T30, T40
Other Bits Spanner: p 4, 6, 8, 10; Tri-Wing®: 1, 2; TORQ-SET®: 6, 8, 10
Shank Length 3.5" (8.9 cm)
Overall Length 7.5" (19.1 cm)
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
Replacement Bits
Cat. No. 32526 32525
Nut Driver Sizes — —
Square Bits #1, #2, #3 —
Hex Bits 2 mm, 3/32", 7/64", 1/8", 9/64", 4 mm, 3/16" 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm
TORX® Bits T6, T7, T8, T10, T15, T20, T25 T7, T8, T10, T15, T20, T25, T27, T30, T40
TORX® is a registered trademark of Acument Intellectual Properties, LLC. TORQ-SET® and Tri-Wing® are registered trademarks of Phillips Screw Co.
74
www.kleintools.com > 800-553-4676
Additional bits and replacement bits can be found on page 75
Other Bits Clutch: 5/32" ((0.4 cm), 3/16" (0.5 cm) Spanner: p 4, 6, 8, 10; Tri-Wing®: 1, 2, 3, 4
Overall Length 1" (2.5 cm) 1" (2.5 cm)
3OLHUV
0XOWL%LW6FUHZGULYHUV1XW'ULYHUV
For Use With
Package Quantity
6WULSSHUV&XWWHUV DQG&ULPSHUV
Heavy Duty (32557) and Ratcheting (32558) Heavy Duty (32557) and Ratcheting (32558) Extended Reach Drivers (32559 and 32560) Stubby Drivers (32561 and 32562)
1 Piece 2 Piece 1 Piece 1 Piece
'ULYHUVDQG :UHQFKHV
Heavy Duty (32557) and Ratcheting (32558) Heavy Duty (32557), Ratcheting (32558) and Stubby (32561) Heavy Duty (32557) and Ratcheting (32558) Extended Reach (32559) Extended Reach (32559) Extended Reach (32560) Extended Reach (32560) Stubby Driver (32561) 5-in-1 (32476) 5-in-1 (32476) 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 2-in-1 Rapi-Driv®, 10-in-1, 11-in-1 and 10-Fold 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers Combo-Tip Multi-Tool (32505) All Klein Tools 2-in-1, 10-in-1, 11-in-1 and 10-Fold Screwdrivers 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Screwdrivers (32290, 32291, 32292) 15-in-1 Tamperproof Screwdriver (32291) 15-in-1 Tamperproof Screwdriver (32291) 15-in-1 Tamperproof Screwdriver (32291) 15-in-1 HVAC Screwdriver (32292) 4-in-1 Electronics Screwdriver (32581, 32585) 4-in-1 Electronics Screwdriver (32581, 32585) 4-in-1 Electronics Screwdrivers (32581, 32585) 4-in-1 Electronics Screwdrivers (32581, 32585) HVAC 8-in-1 Slide Driver™ Screwdriver/Nut Driver (32596) and 11-in-1 Multi-bit Screwdriver (Cat. No. 32527)
2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 1 Bit 1 Bit 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 2 Bits 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 1 Bit 2 Bits 2 Bits 2 Bits 2 Bits 1 Bit
Multi-Bit Screwdriver/Nut Driver Replacement Parts and Bits Replacement Parts for Multi-Bit Screwdriver/Nut Drivers • Precision-machined tips for exact fit into fastener a complete list of replacement bits, • For visit www.kleintools.com
Cat. No.
Tip Type
Barrel Replacements
32392 32394 32395 32396
— — — —
Bit Replacements
TORX® is a registered trademark of Acument Intellectual Properties, LLC.
www.kleintools.com > 800-553-4676
75
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Schrader® is a registered trademark of Schrader-Bridgeport International, Inc.
3RZHU7RROV DQG$FFHVVRULHV
13105
7HVWDQG 0HDVXUHPHQW
32781
9RLFH'DWD9LGHR
32784
7RRO6WRUDJH
32478
-REVLWH $FFHVVRULHV
32484
6DIHW\33( DQG&RPIRUW
32397
7RRO.LWV
32396
#2 Phillips; #1 Square #1 Phillips; 1/4" (6.4 mm) Slotted #2 Square; 3/16" (4.8 mm) Slotted #1, #2 Phillips 3/16" (4.8 mm), 1/4" (6.4 mm) Slotted #2 Square; #2 Phillips #1 Square; 1/4" (6.4 mm) Slotted #2 Phillips; 3/16" (4.8 mm) Slotted #1 Phillips; 3/16" (4.8 mm) Slotted #2 Phillips; 9/32" (7.1 mm) Slotted #1 Phillips; 3/16" (4.8 mm) Slotted #2 Phillips; 1/4" (6.4 mm) Slotted #1, #2 Square #2 Phillips, 3/16" (4.8 mm) Slotted TT7, TT8 TORX® TT9, TT10 TORX® TT15, TT20 TORX® TT25, TT27 TORX® T6,T7 TORX® T10, T15 TORX® T8, T10 TORX® T25, T27 TORX® 3/32", 7/64" Hex 5/32", 3/16" Hex 1/6", 5/64" Hex 1/8", 9/64" Hex 0.9 mm, 1.3 mm Hex 1.5 mm, 2.0 mm Hex 2.5 mm, 3.0 mm Hex 4.0 mm, 5.0 mm Hex #1, #2 Combo Schrader® Valve Core Tool #1, #2 Phillips #0, #3 Phillips #1, #2 Square T10, T15 TORX® T20, T25 TORX® 4 mm, 6 mm Slotted #1, #2 Combo 6, 8 Spanner 10, 12 Spanner 1/8, 9/64 Hex Pin 5/32, 3/16 Hex Pin 10, 15 Tamperproof 20, 25 Tamperproof 27, 30 Tamperproof Schrader® Valve Core Tool #0 Phillips; 3/32" (2.4 mm) Slotted #00 Phillips; 1/8" (3.2 mm) Slotted T7, T10 Tamperproof TORX® T8, T15 TORX® Schrader® Valve Core Tool; 1/8" (3.2 mm) Slotted
&RQGXLW7RROV DQG0HDVXUHPHQW
32398
32397 32398 32399 32400 32401 32410 32411 32412 32478 32479 32482 32483 32484 67101 32540 32541 32542 32543 32544 32485 32545 32546 32547 32548 32549 32550 32551 32552 32553 32554 32752 32528 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779 32780 32781 32782 32783 32784 13391 13392 13104 13105 13231
PLASTIC-HANDLE SCREWDRIVERS
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
Nickel-chrome, precision-forged and polished blades with black tips Internal flanges provide solid, twist-resistant shaft anchor and chrome-plated shaft helps prevent corrosion Tough smooth Comfordome handle fits in the palm of the hand comfortably
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
Plastic-Handle Screwdrivers Includes core Plastic-Handle Screwdriver features plus: Precision-machined Phillips tips provide a more consistent geometric symmetry to ensure accurate fit and torque without slippage Small-diameter cabinet-tip shanks for use in recessed holes or tight places and is well-suited for electrical and telecommunications work 35% larger than comparable screwdriver handles, the oversized Bull Driver handles deliver up to 50% extra power to perform tough jobs with minimal effort Meets or exceeds applicable ASME / ANSI specifications
• • • •
Cat. No. A000 A216-4 A216-6 A316-8
Tip Type 3/32" (2.4 mm) Keystone 1/8" (3.2 mm) Cabinet 1/8" (3.2 mm) Cabinet 3/16" (4.8 mm) Cabinet
BD308
Shank Type Round Round Round Round
Shank Length 1.5" (3.8 cm) 4" (10.2 cm) 6" (15.2 cm) 8" (20.3 cm)
Overall Length 2.875" (7.3 cm) 7" (17.8 cm) 9" (22.9 cm) 11.625" (29.5 cm)
Square Round Round Round
8" 3" 4" 6"
13.188" (33.5 cm) 6.625" (16.8 cm) 8.5" (21.6 cm) 11.188" (28.4 cm)
Bull Driver™ Plastic Handle Screwdrivers
BD308 BD111 BD122 BD133
5/16" (7.9 mm) Keystone #1 Phillips #2 Phillips #3 Phillips
(20.3 cm) (7.6 cm) (10.2 cm) (15.2 cm)
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
Pocket-Clip Screwdrivers Includes core Plastic-Handle Screwdriver features plus: Specially designed for delicate instrument work
A116-3
•
Cat. No. A130-2 A130-3 A116-2 A116-3 A131-2 P12
76
Tip Type 1/8" (3.2 mm) Keystone 1/8" (3.2 mm) Keystone 3/32" (2.4 mm) Keystone 3/32" (2.4 mm) Keystone 1/8" (3.2 mm) Keystone #0 Phillips
www.kleintools.com > 800-553-4676
Shank Type Round Round Round Round Round Round
Shank Length 2" (5.1 cm) 3" (7.6 cm) 2" (5.1 cm) 3" (7.6 cm) 2" (5.1 cm) 2.5" (6.4 cm)
Overall Length 3.875" (9.8 cm) 4.875" (12.4 cm) 4.438" (11.3 cm) 5.438" (13.8 cm) 4.438" (11.3 cm) 5" (12.7 cm)
3OLHUV
3ODVWLF+DQGOH6FUHZGULYHUV Phillips-Tip Screw-Holding Screwdrivers gripping action holds and starts Phillips screws in awkward, • Positive hard-to-reach places • Blade separates to hold the fastener • Not designed for torquing or tightening
'ULYHUVDQG :UHQFKHV
Overall Length 5.25" (13.3 cm) 10.25" (26 cm) 7.75" (19.7 cm) 9.75" (24.8 cm) 11.75" (29.9 cm) 8.25" (21 cm) 10.25" (26 cm) 12.25" (31.1 cm)
—
Cat. No. K14 K16 K19
Tip Type Screw Holding Screw Holding Screw Holding
Shank Type Round Round Round
Overall Length 5" (12.7 cm) 7" (17.8 cm) 9" (22.9 cm)
— — — —
6DIHW\33( DQG&RPIRUW
Shank Type Round Round Round Round Round Round Round Round
7RRO.LWV
Tip Type Screw Holding Screw Holding Screw Holding Screw Holding Screw Holding Screw Holding Screw Holding Screw Holding
Slotted-Holding Screwdriver Set SK234 3-Pc
&RQGXLW7RROV DQG0HDVXUHPHQW
K16
K36
Cat. No. K23 K28 K34 K36 K38 K44 K46 K48
6WULSSHUV&XWWHUV DQG&ULPSHUV
Slotted Plastic-Handle Screw-Holding Screwdrivers gripping action holds, starts, and drives slotted screws • Positive in awkward, hard-to-reach places • Split-blade screw-holding driver wedges into screw slot • Not designed for torquing or tightening
‡ Blade thickness of 0.043" (1.09 mm) expanding to 0.085" (2.16 mm). K23 has pocket clips.
-REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
77
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW
7RUTXH'ULYHU.LWV
Impact and Torque Drivers Reversible Impact-Driver Set • Rugged, hand impact-driver turns rusted, frozen, or other stubborn screws • Can also be used with 3/8" square-drive impact sockets spring-loaded, helical design transforms the impact of a hammer blow to • Internal, up to 200 ft-lb of shock torque • Easily reverses for tightening or loosening screws • Constructed of high-grade alloy steel that has been heat-treated for added strength • Reclosable, seal-tight vinyl pouch with hang-up grommet 70220
BITS FOR IMPACT DRIVER SET
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
70229
Cat. No. 70220
Phillips Bits #2, #4
Nut Driver Sizes 5/16"
Slotted Bits 5/16" (7.9 mm), 1/2" (12.7 mm)
Included 3/8" (1 cm) Square Drive fitting Adapter
Torque Screwdriver Set easy to use set includes the Torque Screwdriver, a 6-piece bit set • Compact, and a rugged case with foam inserts for a tight, organized fit • Increased usability and readability plus a wider torque range (5-40 in-lb) • Trilobular design with a textured finish for better grip • Lightweight, aluminum frame • N.I.S.T. traceable calibration certificate • Set includes six 3-1/2" (8.9 cm) power drivers and a 1/4" nut driver
Cat. No. 57032
Included Phillips: p #1 and #2; Slotted: 3/16" (4.8 ( mm)) and 1/4" (6.4 mm); Square: #1 and #2 and 1/4" Nut Driver
Weight 1.0 lb (0.5 kg)
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
57032
Master Electrician’s Torque Tool Set • Two micrometer-adjustable torque wrenches • Nine hex-wrench bits • Two 7/16" hex-wrench extensions • One 7/16" female hex-wrench adapter coupler • One hex-to-square adapter for wrenches and one adapter for screwdrivers • One adjustable torque screwdriver • Seven screwdriver bits; five slotted, two Phillips • Hinged metal box • Additional torque screwdrivers available in screwdriver section Cat. No. 57060
Description Master Electrician's Torque Wrench Set, 25-Piece
Weight 9.6 lb (4.3 kg) 57060
78
www.kleintools.com > 800-553-4676
6WULSSHUV&XWWHUV DQG&ULPSHUV
NUT DRIVERS
3OLHUV
'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
Impact Flip Sockets • Patent-pending design with onboard storage • Quickly and easily change blade between a screwdriver handle and an impact driver 1/4" socket has both shallow (driver) and deep (bit holder) • Multi-function configurations for added versatility • Powerful Rare-Earth magnet securely holds bits and hex head fasteners • Detachable sockets allow for easy removal of metal shavings from magnet • Features 1/4" Quick-Connect adapter for easy use with an impact driver • Sockets store on shaft in any order or orientation
6DIHW\33( DQG&RPIRUW
32900
-REVLWH $FFHVVRULHV
768
Description 7-in-1 Impact Flip Socket 7-in-1 Impact Flip Socket Set - No Handle 3-in-1 Impact Flip Socket, 3" (7.6 cm) Length 3-in-1 Impact Flip Socket, 5" (12.7 cm) Length 2-Piece Impact Flip Socket Set (includes 32766/32767)
Hex Sizes Included 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"
7RRO6WRUDJH
Cat. No. 32900 32907 32766 32767 32768
1/4", 5/16"
9RLFH'DWD9LGHR 635-9/16
Nut Driver Sizes 1/4" 5/16" 3/8" 7/16" 1/2" 9/16"
Shaft Length 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
Color Code Red Yellow Blue Brown Red Orange
Overall Length 9" (22.9 cm) 9" (22.9 cm) 9" (22.9 cm) 9.391" (23.9 cm) 9.391" (23.9 cm) 9.391" (23.9 cm)
Heavy-Duty Nut Driver Sets 635-4 4-Pc 635-6 6-Pc
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 635-1/4 635-5/16 635-3/8 635-7/16 635-1/2 635-9/16
7HVWDQG 0HDVXUHPHQW
Heavy-Duty Cushion-Grip Nut Drivers • Through-handle full-hollow shaft design for torquing hex nuts onto threaded rod of any length • Color-coded ends and tips for easy size identification • Wrench-assist for added torque • Rare-Earth magnetic tip holds nut in place while fastening
— —
79
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV
Handle end is also color coded for easy identification
Meets or exceed applicable ASME / ANSI and MIL specifications
Internal flanges provide solid, twist-resistant shaft anchor
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Cushion-Grip Nut Drivers
Tip-Ident™ quickly identifies size and orientation Cushion-Grip handle for greater torque and comfort
Premium chrome-plated shaft for smooth feel and corrosion resistance
Magnetic-Tip Hollow-Shaft Nut Drivers Includes core Cushion-Grip Nut Driver features plus: Exclusive hollow shaft* design with Rare-Earth magnetic tip features unobstructed pass-through, even on long bolts
Cat. No. 610-1/4M 610-5/16M 630-3/16M 630-1/4M 630-5/16M 630-11/32M 630-3/8M 630-7/16M 630-1/2M 646-3/16M 646-1/4M 646-5/16M 646-11/32M 646-3/8M 646-7/16M 646-1/2M 618-1/4M 618-5/16M
Nut Driver Sizes 1/4" 5/16" 3/16" 1/4" 5/16" 11/32" 3/8" 7/16" 1/2" 3/16" 1/4" 5/16" 11/32" 3/8" 7/16" 1/2" 1/4" 5/16"
Shaft Length 1.5" (3.8 cm) 1.5" (3.8 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 18" (45.7 cm) 18" (45.7 cm)
*3/16" magnetic nut driver does not have a hollow shaft.
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
•
80
www.kleintools.com > 800-553-4676
Color Code Red Yellow Black Red Yellow Green Blue Brown Red Black Red Yellow Green Blue Brown Red Red Yellow
630-3/8M
Overall Length 3.5" (8.9 cm) 3.5" (8.9 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 7.313" (18.6 cm) 7.313" (18.6 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 10.313" (26.2 cm) 10.313" (26.2 cm) 21.75" (55.3 cm) 21.75" (55.3 cm)
631M 7-Pc — —
— — — — — — — — —
Cushion-Grip Nut Driver Sets 647M 630M 646M 7-Pc 2-Pc 2-Pc — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
610M 2-Pc
— — — — — — — — — — — — — — — —
3OLHUV
1XW'ULYHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Hollow-Shaft Nut Drivers Includes core Cushion-Grip Nut Driver features plus: 3" (7.6 cm) length for most long bolt and stud applications 6" (15 cm) length reaches into deep recesses and fits over extra-long bolts and studs Exclusive hollow shaft* design with Rare-Earth magnetic tip features unobstructed pass-through, even on long bolts
• • •
630-11MM
'ULYHUVDQG :UHQFKHV 646-5/8-INS
Red Yellow Black Red Orange Yellow Green Blue Brown
6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 7.313" (18.6 cm)
— — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — —
33524 9-Pc Insulated — — — — — — — — — — — — — — — — — — — —
9RLFH'DWD9LGHR
Overall Length 3.5" (8.9 cm) 3.5" (8.9 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 7.313" (18.6 cm) 7.313" (18.6 cm) 9.375" (23.8 cm) 9.375" (23.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 10.313" (26.2 cm) 10.313" (26.2 cm) 10.313" (26.2 cm) 10.313" (26.2 cm) 11.375" (28.9 cm) 11.375" (28.9 cm) 11.375" (28.9 cm) 11.375" (28.9 cm) 11.375" (28.9 cm)
7RRO6WRUDJH
3" 3" 3" 3" 3" 3" 3" 3" 3"
Color Code Yellow Yellow Black Red Yellow Green Blue Brown Red Orange Yellow Black Black Red Red Yellow Yellow Green Green Blue Blue Brown Brown Red Red Orange Orange Yellow Yellow
-REVLWH $FFHVVRULHV
4 mm 4.5 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm
Insulated No No No No No No No No No No No No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes
Metric
(7.6 cm) (7.6 cm) (7.6 cm) (7.6 cm) (7.6 cm) (7.6 cm) (7.6 cm) (7.6 cm) (7.6 cm)
No No No No No No No No No
— — — — — — — — —
— — — — — — — — —
— —
—
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
7HVWDQG 0HDVXUHPHQW
630-4MM 630-4.5MM 630-5MM 630-6MM 630-7MM 630-8MM 630-9MM 630-10MM 630-11MM
6DIHW\33( DQG&RPIRUW
Shaft Length 1.5" (3.8 cm) 1.5" (3.8 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 4" (10.2 cm) 4" (10.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm)
Cushion-Grip Nut Driver Sets 65160 633 610 6-Pc 4-Pc 2-Pc — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
7RRO.LWV
Nut Driver Sizes 1/4" 5/16" 3/16" 1/4" 5/16" 11/32" 3/8" 7/16" 1/2" 9/16" 5/8" 3/16" 3/16" 1/4" 1/4" 5/16" 5/16" 11/32" 11/32" 3/8" 3/8" 7/16" 7/16" 1/2" 1/2" 9/16" 9/16" 5/8" 5/8"
647 7-Pc — — — — — — — — — — —
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 610-1/4 610-5/16 630-3/16 630-1/4 630-5/16 630-11/32 630-3/8 630-7/16 630-1/2 630-9/16 630-5/8 646-3/16 646-3/16-INS 646-1/4 646-1/4-INS 646-5/16 646-5/16-INS 646-11/32 646-11/32-INS 646-3/8 646-3/8-INS 646-7/16 646-7/16-INS 646-1/2 646-1/2-INS 646-9/16 646-9/16-INS 646-5/8 646-5/8-INS
631 7-Pc — —
*3/16" magnetic nut driver does not have hollow shaft.
3RZHU7RROV DQG$FFHVVRULHV
81
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
NUT DRIVERS
MULTI-BIT
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
Cushion-Grip handle for greater torque and comfort
Hollow-shafts accommodate long bolts
Color-coded band for easy identification
Heavy-Duty Cushion-Grip Multi-Bit Nut Drivers • Multiple sizes in one convenient tool handle and shaft exceed the torque • Heavy-duty performance of regular nut drivers Strong, Rare-Earth magnets securely hold nuts • and bolts (Cat. No. 32807MAG)
32807MAG
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
Wrench-assist feature for added torque
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
32801
Cat. No. 32807MAG 32800 32801
Description 7-in-1 6-in-1 5-in-1
Nut Driver Sizes 1/4", 5/16", 11/32", 3/8", 1/2", 7/16", 9/16" 3/16", 1/4", 5/16", 3/8", 7/16", 9/16" 3/16", 1/4", 5/16", 3/8", 9/16"
Shaft Length 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
Overall Length 9.54" (24.2 cm) 9.5" (24.1 cm) 9.109" (23.1 cm)
2-in-1 Hex Head Nut Driver • 1/4" and 5/16" six-point hex nut driver • Powerful Rare-Earth magnets for maximum fastener retention • Solid build quality; feels like a conventional nut driver • Color coded bands for easy identification • Wrench-assist to help remove stubborn fasteners
Cat. No. 65064
82
Description Hex Driver
www.kleintools.com > 800-553-4676
65064
Tip Size 1/4", 5/16"
Shank Length 3.625" (9.2 cm)
Overall Length 8" (20.3 cm)
NUT DRIVERS
PLASTIC-HANDLE
'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications.
6WULSSHUV&XWWHUV DQG&ULPSHUV
Internal flanges provide solid, twist-resistant shaft anchor
3OLHUV
Chrome-plated shaft helps prevent corrosion
Hollow-Shaft Nut Drivers
• Standard length works for most applications • Fits over long bolts and studs • Color-coded handles for easy identification • Smooth Comfordome handles fit the palm of the hand comfortably • Meets or exceeds applicable ASME / ANSI specifications
S11
™
Shaft Length 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm)
Handle Color Red Green Blue Black Red Amber Green Blue Red
Overall Length 6.625" (16.8 cm) 6.625" (16.8 cm) 6.625" (16.8 cm) 9.625" (24.5 cm) 9.625" (24.5 cm) 9.625" (24.5 cm) 9.625" (24.5 cm) 9.625" (24.5 cm) 10" (25.4 cm)
7RRO6WRUDJH
Nut Driver Sizes 1/4" 11/32" 3/8" 3/16" 1/4" 5/16" 11/32" 3/8" 1/2"
-REVLWH $FFHVVRULHV
Cat. No. S8 S11 S12 S66 S86 S106 S116 S126 S166
6DIHW\33( DQG&RPIRUW
Includes core Plastic-Handle Nut Driver features plus:
Super-Long Shaft Nut Drivers Includes core Plastic-Handle Nut Driver features plus:
S1018 Nut Driver Sizes 5/16" 5/16"
Shaft Length 18" (45.7 cm) 18" (45.7 cm)
Handle Color Amber Amber
Overall Length 21.625" (54.9 cm) 21.625" (54.9 cm)
7HVWDQG 0HDVXUHPHQW
Cat. No. S1018 S1018M
9RLFH'DWD9LGHR
• Ideal for reaching into walls and other hard-to-reach places where added length is necessary • Cat. No. S1018 has a non-magnetic tip; Cat. No. S1018M has a magnetic tip
Magnetic Nut Driver – Solid Shaft
• Powerful nut-holding magnet built into solid shaft S106M
Nut Driver Sizes 5/16"
Shaft Length 6" (15.2 cm)
Handle Color Amber
Overall Length 9.625" (24.5 cm)
www.kleintools.com > 800-553-4676
83
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Cat. No. S106M
3RZHU7RROV DQG$FFHVVRULHV
Includes core Plastic-Handle Nut Driver features plus:
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW
7DS7RROVDQG$ZOV
Tap Tools Cushion-Grip Tap Tool Driver • Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions • Increases job speed by combining taps and drivers in one tool • Each tap size re-threads to next larger size if threads are stripped
626
Replacement Bits
Cat. No. 32517
Nut Driver Sizes 1/4", 5/16", 3/8" —
Phillips Bits #1, #2 —
Slotted Bits 1/4" ((6.4 mm),) 3/16" (4.8 mm) —
7RRO.LWV
626
6DIHW\33( DQG&RPIRUW
32517
Tap Sizes 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20
Shank Overall Length Length 4" (10.2 cm) 7.75" (19.7 cm) 4" (10.2 cm) 7.75" (19.7 cm)
Cat. No. 32518
Tap Sizes 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20
628-20
10-24, 12-24, 1/4-20
626, 627-20
626-32
10-32, 8-32, 6-32
625-32, 626, 627-20
Plastic-Handle Tap Tool • Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions • Each tap size re-threads to next larger size if threads are stripped • Two high-carbon steel taps are secured in reversible holder
For use with Cat. No. 32517
627-20
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
625-24
Replacement Bits
Cat. No. 627-20 625-24 625-32
Description 6-in-1 Tapping Tool Triple Taps Triple Taps
Tap Sizes 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 6-32, 8-32, 10-24 6-32, 8-32, 10-32
Overall Length 7.625" (19.4 cm) 7.125" (18.1 cm) 7.125" (18.1 cm)
Cat. No. 628-20 626-32 626-24
Tap Sizes 10-24, 12-24, 1/4-20 10-32, 8-32, 6-32 6-32, 8-32, 10-24
For use with Cat. No. 626, 627-20 625-32, 626, 627-20 625-24
Scratch Awls Cushion-Grip Scratch Awls • Professional, heavy-duty, hard-pointed awl • Scribes metal, starts screw holes, performs a variety of piercing and punching jobs chrome-plated, heat-treated, tempered-steel shank has full reinforcing bolster • atRigid, handle for extra strength and impact reinforcement No. 650DD has plated metal strike cap to protect handle from hammer blows • Cat. and is engineered, manufactured and tested for prying, chiseling and punching
Steel Scratch Awl • One-piece forged-steel blade and bolstered shank • Heat-treated for long life • Well-balanced for top efficiency during use • Black finish for rust resistance 84
www.kleintools.com > 800-553-4676
650DD
Cat. No. 650 only
Cat. No. 650 650DD
Shank Length 3.5" (8.9 cm) 3.5" (8.9 cm)
Overall Length 7.875" (20 cm) 7.875" (20 cm)
66385
Cat. No. 66385
Shank Length 3.5" (8.9 cm)
Overall Length 7" (17.8 cm)
6WULSSHUV&XWWHUV DQG&ULPSHUV
'ULYHUVDQG :UHQFKHV
&RQGXLW7RROV DQG0HDVXUHPHQW
7RRO.LWV
6DIHW\33( DQG&RPIRUW
-REVLWH $FFHVVRULHV
WRENCHES
3OLHUV
7RRO6WRUDJH
9RLFH'DWD9LGHR
7HVWDQG 0HDVXUHPHQW
3RZHU7RROV DQG$FFHVVRULHV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
Adjustable Wrenches Precision-machined jaws are individually chosen and assembled by hand for smooth operation
Chrome-plated for corrosion resistance
Knurl turns smoothly for easy operation Standard and metric scales for faster adjustment
Contoured handles for comfortable use
Rail is ground for precision fit
4-threaded knurl worm gear for improved balance
Minimally protruding jaw shank for greater capacity in tight spaces
Adjustable Wrenches Includes core Adjustable Wrench features plus: High capacity smaller wrenches handle bigger jobs, especially in confined spaces Extra-wide 1/2" (1.27 cm) jaw that provides the same capacity as a standard 12" (30.48 cm) adjustable wrench (Cat. No. D509-8)
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
• •
Cat. No.
D509-8
Jaw Capacity
Handle Color
Handle Finish
Overall Length
0.94" (2.4 cm) 1.125" (2.9 cm) 1.3125" (3.3 cm) 1.5" (3.8 cm) 0.94" (2.4 cm) 1.125" (2.9 cm) 1.3125" (3.3 cm) 1.5" (3.8 cm)
Chrome Chrome Chrome Chrome Transparent Red Transparent Red Transparent Red Transparent Red
High-Polish Chrome High-Polish Chrome High-Polish Chrome High-Polish Chrome Plastic-Dipped Plastic-Dipped Plastic-Dipped Plastic-Dipped
6.375" (16.2 cm) 8.125" (20.6 cm) 10.125" (25.7 cm) 12.25" (31.1 cm) 6.5" (16.5 cm) 8.25" (21 cm) 10.25" (26 cm) 12.35" (31.4 cm)
1.5" (3.8 cm)
Blue
Plastic-Dipped
8.5" (21.6 cm)
2.063" (5.2 cm) 2.5" (6.4 cm) 1.688" (4.3 cm) 0.5" (1.3 cm)
Chrome Chrome Chrome Transparent Red
High-Polish Chrome High-Polish Chrome High-Polish Chrome Plastic-Dipped
18.25" (46.4 cm) 24" (61 cm) 15.875" (40.3 cm) 4.5" (11.4 cm)
High Capacity
507-6 507-8 507-10 507-12 D507-6 D507-8 D507-10 D507-12
Standard Capacity — Extra-Wide Jaw
D509-8
Blue
Transparent Red
Standard Capacity
500-18 500-24 506-15 D506-4
Chrome
Adjustable Wrenches – Slim Jaw Includes core Adjustable Wrench features plus: Designed for tight wrench-over-wrench applications Jaws meet ASME 107.11-2010 testing standards for adjustable wrenches while being 40% slimmer than most standard adjustable wrench jaws Cat. No. D86936 has 1-1/2" (3.81 cm) extra wide jaw capacity that is 5/16" (0.793 cm) larger than other wide-capacity 8" (20.32 cm) wrenches Standard and metric size markings for fast adjustment Manufactured for strength and durability
• • • • •
Cat. No. D86932 D86934 D86936
86
Jaw Capacity 0.5" (1.3 cm) 1" (2.5 cm) 1.5" (3.8 cm)
Handle Color Blue Blue Blue
www.kleintools.com > 800-553-4676
D86936
Handle Finish Plastic-Dipped Plastic-Dipped Plastic-Dipped
Overall Length 4.563" (11.6 cm) 6.406" (16.3 cm) 8.375" (21.3 cm)
6OLPPHU-DZ
3OLHUV
:UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
2-in-1 Reversible Adjustable Pipe Wrench
• • • • • •
D86930
'ULYHUVDQG :UHQFKHV
Includes core Adjustable Wrench features plus: Versatile 2-in-1 tool converts from adjustable wrench to pipe wrench by reversing the removable jaw Reversible jaw has teeth and an obtuse angle to work as a pipe wrench Pipe wrench side of jaw grips pipes and round fasteners with self-gripping angled teeth 1-1/2" (3.8 cm) extra-wide jaw opening in both configurations Standard and metric size markings for fast adjustment Meets ASME 107.11-2010 standards for adjustable wrenches
&RQGXLW7RROV DQG0HDVXUHPHQW
3LSH:UHQFK Jaw Capacity 1.5" (3.8 cm)
Handle Color Blue
Handle Finish Plastic-Dipped
7RRO.LWV
Cat. No. D86930
$GMXVWDEOH:UHQFK Overall Length 10.25" (26 cm)
6DIHW\33( DQG&RPIRUW
Open-End Wrenches • Forged from the highest quality alloy steel • Corrosion resistant
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
Different size opening on each end of wrench
Large Size 5/16" 7/16" 9/16" 5/8" 3/4" 7/8" 1"
Small Size 1/4" 3/8" 1/2" 9/16" 11/16" 13/16" 15/16"
Overall Length 4.75" (12.1 cm) 6" (15.2 cm) 7" (17.8 cm) 7.5" (19.1 cm) 9" (22.9 cm) 10" (25.4 cm) 11" (27.9 cm)
Combination Wrench Sets 68450 5-Pc 68452 7-Pc
7HVWDQG 0HDVXUHPHQW
Cat. No. 68460 68461 68462 68463 68464 68465 68466
Durable chrome-plated finish
9RLFH'DWD9LGHR
Ends are offset at 15° angle for clearance over obstructions
— —
87
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
Sets include pouch with marked pockets.
3OLHUV
Combination wrenches have the same size opening on each end
• Forged from the highest quality alloy steel • Corrosion resistant
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Combination Wrenches
Durable chrome-plated finish Open ends are offset at standard 15° angle for confined working areas
Box ends have 15° angle offset to provide clearance over obstructions
Combination Wrenches – SAE Cat. No. 68410 68411 68412 68413 68414 68415 68416 68417 68418 68419 68420 68421 68422 68423 68424 68425
Size 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-1/4"
Box End Point 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Overall Length 5.125" (13 cm) 4.375" (11.1 cm) 6.125" (15.6 cm) 6.625" (16.8 cm) 7.125" (18.1 cm) 7.5" (19.1 cm) 8.5" (21.6 cm) 9" (22.9 cm) 9.875" (25.1 cm) 10.625" (27 cm) 11.5" (29.2 cm) 12.5" (31.8 cm) 13.25" (33.7 cm) 14.25" (36.2 cm) 15.5" (39.4 cm) 16.25" (41.3 cm)
Combination Wrench Sets 68402 9-Pc 68404 12-Pc
68400 7-Pc
— — — — — — — — —
— — — — — — —
68406 14-Pc — —
— — — —
Sets include pouch with marked pockets
Combination Wrenches – Metric 68512
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
Combination Wrench Sets Cat. No. 68507 68508 68509 68510 68511 68512 68513 68514 68515 68517 68519
Size 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 17 mm 19 mm
Box End Point 12 12 12 12 12 12 12 12 12 12 12
Overall Length 5.125" (13 cm) 5.375" (13.7 cm) 6.125" (15.6 cm) 6.5" (16.5 cm) 6.5" (16.5 cm) 7.125" (18.1 cm) 7.125" (18.1 cm) 7.5" (19.1 cm) 7.5" (19.1 cm) 9" (22.9 cm) 9.75" (24.8 cm)
68500 7-Pc —
—
— — Sets include pouch with marked pockets
88
www.kleintools.com > 800-553-4676
68502 11-Pc
Socket Size
65600 65601 65602 65603 65604 65605 65606 65607 65608 65700 65701 65702 65703
3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
5/8" 11/16" 3/4" 13/16" 7/8" 7/16" 1/2" 9/16" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-1/4"
1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8"
3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 3/8" 7/16" 1/2" 3/8" 7/16" 1/2" 9/16"
Imperial Deep Socket Depth – 6 Point
65610 65611 65613 65614 65711 65712 65713 65714 65715 65716 65717
1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"
1/4" 9/32" 11/32" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16"
3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"
7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm
9RLFH'DWD9LGHR
65825 65826 65827 65828 65829 65830 65831
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8"
7RRO6WRUDJH
65704 65705 65706 65707 65708 65800 65801 65802 65804 65805 65806 65807 65808 65809 65810 65811 65812
-REVLWH $FFHVVRULHV
Imperial Socket Depth – 6 Point
6DIHW\33( DQG&RPIRUW
Drive Size
Imperial Socket Depth – 12 Point
Imperial Deep Socket Depth – 12 Point
65704 – Standard
Cat. No.
7RRO.LWV
Socket Size
&RQGXLW7RROV DQG0HDVXUHPHQW
65717 – Deep
Drive Size
'ULYHUVDQG :UHQFKHV
Cat. No.
6WULSSHUV&XWWHUV DQG&ULPSHUV
SOCKET
WRENCHES
3OLHUV
Sockets • Forged from rugged alloy steel for long life • Chrome finish for lasting protection • Size engraved for easy identification • 12-point socket provides greater torque
Metric – 6 Point
Nut Driver Sizes 1/4", 5/16"
Phillips Bits #1, #2
Slotted Bits 3/16" (4.8 mm), 1/4" (6.4 mm)
Overall Length 4.33" (11 cm)
89
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 65200
65200
65907 65908 65909 65910 65911 65912 65913 65914 65915 65916 65917 65918 65919
7HVWDQG 0HDVXUHPHQW
Electrician’s Mini Ratchet Set • Versatile 1/4" dual-drive head and socket adapter • Ring magnet and bit clip for better bit retention • Slim profile head for tight spaces • 72-tooth ratchet makes a small 5° sweep • Handle loop provides one-hand driving and convenient storage • Bit holder with a 1/4" adapter and four drive bits
3OLHUV
1/4" Drivers and Extensions 65620
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
6RFNHW:UHQFKHV
Cat. No. 65620 65621 65622 65623
Description 4.75" Ratchet, 1/4" Drive Spinner Handle 2" Extension with 1/4" Socket Size 6" Extension
65621
65622
65623
65720
Cat. No. 65720 65721 65722 65723 65724
Description 7" Ratchet, 3/8" Drive 1.75" Extension 3" Extension 6" Extension 3/8" Socket Size 5/8" Spark Plug Socket, 3/8" Drive
65721
65723
65722
65724
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
3/8" Drivers and Extensions
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
1/2" Drivers and Extensions 65820
Cat. No. 65820 65821 65823
Description 10" Ratchet, 1/2" Drive 5" Extension, 1/2" Drive 5/8" Spark Plug Socket 1/2" Drive
65821 65823
Micro-Adjustable Torque-Sensing Wrenches with Square-Drive Ratchet Head • Micro-adjustable for increased accuracy • Easy to read and adjust with quick release lever • Stainless steel handle provides improved, more comfortable grip • N.I.S.T. traceable calibration certificate meeting the ASME standard of ±4% 57005
Cat. No. 57000 57005 57010
90
Drive Size 0.375" (1 cm) 0.375" (1 cm) 0.5" (1.3 cm)
Range 10 to 100 ft. lb. (13.6 to 135.6 Nm) 30 to 250 in. lb. (3.4 to 28.3 Nm) 30 to 250 ft. lb. (40.7 to 340.0 Nm)
www.kleintools.com > 800-553-4676
Overall Length 14.125" (35.9 cm) 10.625" (27 cm) 24.25" (61.6 cm)
3OLHUV
6RFNHW:UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW
65510 12-Piece 1/2" Drive Socket Wrench Set
65504 12-Piece 3/8" Drive Socket Wrench Set
Set consists of the following pieces: Eight 6-point deep sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", and 13/16" Hinged metal box
•
Set consists of the following pieces: Eight 12-point deep sockets: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and 15/16" Hinged metal box
•
Set consists of the following pieces: Nine 12-point sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and 15/16" One extension: 5" long One spark plug socket: 5/8" One ratchet Hinged metal box
Set consists of the following pieces: Four 6-point sockets: 3/8", 7/16", 1/2", and 9/16" Four 12-point sockets: 5/8", 11/16", 3/4", and 13/16" One spark plug socket: 5/8" Two extensions: 1-3/4" and 6" long One ratchet Hinged metal box
65500 13-Piece 1/4" Drive Socket Wrench Set
65506 13-Piece 3/8" Drive Socket Set - Metric
65512 16-Piece 1/2" Drive Socket Wrench Set
65508 20-Piece 3/8" Drive Socket Wrench Set
Set consists of the following pieces: Nine 6-point sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", and 1/2" One spinner handle Two extensions: 2" and 6" long One ratchet Hinged metal box
Set consists of the following pieces:
Set consists of the following pieces: Thirteen 12-point sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", and 1-1/4" One extension: 5" long One flex handle: 17" long One ratchet Hinged metal box
Set consists of the following pieces: Four 6-point sockets: 3/8", 7/16", 1/2", and 9/16" Five 12-point sockets: 5/8", 11/16", 3/4", 13/16", and 7/8" Eight 6-point deep sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", and 13/16" Two extensions: 1-3/4" and 3" long One ratchet Hinged metal box
•
•
• • • • •
• • • • • •
6DIHW\33( DQG&RPIRUW
65514 8-Piece 1/2" Drive Deep-Socket Set
7RRO.LWV
65502 8-Piece 3/8" Drive Deep-Socket Set
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
•
• • • •
• • •
www.kleintools.com > 800-553-4676
91
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
• • •
3RZHU7RROV DQG$FFHVVRULHV
• • • •
•
7HVWDQG 0HDVXUHPHQW
•
Thirteen 6-point sockets: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm Handy, flip-lock tray
9RLFH'DWD9LGHR
•
3OLHUV
For use in confined spaces and on long studs
• Reverse ratcheting action by simply turning wrench over • Corrosion resistant
Different size opening on each end
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Ratcheting Box Wrenches
&RQGXLW7RROV DQG0HDVXUHPHQW
Durable, chrome-plated finish Laminated construction for greater strength
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
Ratcheting Box Wrench Sets Cat. No. 68200 68201 68202 68203 68204 68205 68206
Size 1/4" x 5/16" 3/8" x 7/16" 1/2" x 9/16" 5/8" x 11/16" 5/8" x 3/4" 11/16" x 3/4" 13/16" x 7/8"
Number of Points 12 12 12 12 12 12 12
Overall Length 4.375" (11.1 cm) 5.5" (14 cm) 6.875" (17.5 cm) 8.25" (21 cm) 8.25" (21 cm) 9.25" (23.5 cm) 9.25" (23.5 cm)
68221 5-Pc
68222 7-Pc
— — Sets include pouch with marked pockets
Fully Reversible Ratcheting Offset Box Wrenches Includes core Ratcheting Box Wrench features plus: Both ends are offset 25° for more convenient use in confined spaces Quick-flip reversing lever for instant ratchet reversal
• •
68236
Ratcheting Box Wrench Sets Cat. No. 68234 68236 68238 68240 68242
Size 1/4" x 5/16" 3/8" x 7/16" 1/2" x 9/16" 5/8" x 11/16" 3/4" x 7/8"
Number of Points 6 6 6 12 12
Overall Length 4.375" (11.1 cm) 5.5" (14 cm) 6.75" (17.2 cm) 8.125" (20.6 cm) 9.125" (23.2 cm)
68244 3-Pc
68245 5-Pc
— — Sets include pouch with marked pockets
Ratcheting Refrigeration Wrenches • Fully reversible for refrigeration-packing gland nuts, valve stem sockets and beam-clamp installation • Compact in size, with clearly marked sockets for four nut sizes • Quick-flip reversing lever permits instant ratchet reversal • Polished chrome finish for smooth edges for comfort Cat. No. 68309 68310
Size 3/16", 1/4" Square x 1/2", 9/16" Hex 3/16", 5/16" Square x 1/4", 3/8" Square
Overall Length 6.813" (17.3 cm) 5.5" (14 cm)
68310
Additional Items
Cat. No. 86939
Description Hex Size Adapter for Refrigeration Wrench 3/16", 5/16"
Connector Type Spring Loaded Ball Bearing
92
www.kleintools.com > 800-553-4676
Overall Length 2.125" (5.4 cm)
86939
6WULSSHUV&XWWHUV DQG&ULPSHUV
SPECIALTY WRENCHES
3OLHUV
'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
4-in-1 Lineman's Ratcheting Wrench 4-in-1 Lineman's 3/4", 13/16", 1", 1-1/8" Slim Ratcheting Wrench 6-in-1 Lineman's 3/4", 13/16", 1", 1-1/8"; Ratchetingg Wrench, Heavy-Duty 6-in-1 Lineman's 3/4", 13/16", 1", 1-1/8"; Ratcheting Wrench
KT152T KT155HD KT155T
— 9/16", 3/4"
KT155HD
9RLFH'DWD9LGHR
KT151T
KT152T
Overall Length 13" (33 cm) 13.25" (33.7 cm) 12" (30.5 cm)
7RRO6WRUDJH
Description
KT151T
-REVLWH $FFHVVRULHV
Sizes Square Hex Bits Bits 3/4", 13/16", 1", 1-1/8" —
Cat. No.
6DIHW\33( DQG&RPIRUW
Lineman’s Ratcheting Wrenches • Bolt-through design allows bolts to pass through the socket x 13/16", 1" x 1-1/8" combination square • 3/4" socket sizes for most common utility hardware • Bright yellow socket for easy visibility on most common utility pole hardware, • Works such as lag bolts, “C” clamps and suspension bolts ridges that provide a better grip • Side (Cat. Nos. KT151T and KT152T)
KT155T
9/16", 3/4"
9.375" (23.8 cm)
Application 5/8" (1.6 cm) Hardware 3/4" (1.9 cm) Hardware Bell System Type
Large Size 29/32", 1-3/32" 1-1/16", 1-5/16" 1-1/16", 1-3/16"
Small Size 5/8", 13/16" 5/8", 7/8" 11/16", 7/8"
Overall Length 13" (33 cm) 13" (33 cm) 13" (33 cm)
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 3146 3146A 3146B
3146
7HVWDQG 0HDVXUHPHQW
Lineman’s Wrenches • Forged from special bar steel and heat-treated for long life • Each end has two different size openings • Hole is provided at larger end for turning-in standard pole steps • Wrench is suited for use on heavy three-bolt guy clamps on which clearance is limited • Cat. Nos. 3146 and 3146A are dark blue; Cat. No. 3146B is silver • Small end is painted silver on Cat. No. 3146A • Cat. No. 3146B features end openings sized to NEMA hardware specifications
Dark Blue - 3146
Blue/Silver - 3146
Silver - 3146B
93
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
6SHFLDOW\:UHQFKHV Lineman’s Ratcheting Box Wrenches • 1/2", 9/16", 5/8" and 3/4" sizes in one tool (Cat. No. KT223X4) • Solid, one piece design (Cat. No. KT223X4) NOT INSULATED • “See-through” insulating handle confirms metal ends are not connected (Cat. No. KT223X4-INS) Cat. No.
Description
Size
KT223X4 KT223X4-INS
Lineman's Ratcheting 4-in-1 Box Wrench Lineman's Insulating 4-in-1 Box Wrench
1/2", 9/16", 5/8", 3/4" 1/2", 9/16", 5/8", 3/4"
Number of Points 12 12
Overall Length 8.25" (21 cm) 9" (22.9 cm)
Can Wrench • Two tools in one; saves space in your pouch • One end opens telephone box fasteners, the other end tightens nuts on binding-post terminals • The 7/16" socket has a black finish and the 3/8" socket has a silver finish are 1-1/4" (3.2 cm) deep to fit over long binding posts and are thin-walled for easy • Sockets access into tight areas • Hex-socket design enables using a wrench to obtain extra torque • High-impact, break-resistant handle for long and dependable service Cat. No. • Sockets are heat-treated, alloy steel 68005 Conduit Locknut Wrench • Easily attach locknuts in tight or deep cut-in boxes • For 1/2" and 3/4" (1.3 cm and 1.9 cm) connectors • Direct-drive heads rotate each other when twisted steel construction enables needed torque to loosen • Heavy-duty or tighten connectors • Perfect for remodel work where box is filled with existing wires • US Patent pending Cat. No. 56999
Size 1/2", 3/4"
KT223X4
KT223X4-INS
68005
Socket Size 3/8", 7/16" Hex Nut
Handle Diameter 1" (2.5 cm)
Overall Length 7" (17.8 cm)
56999
Weight 11.2 oz (318 g)
Overall Length 9" (22.9 cm)
Grip-It™ Strap Wrenches • Completely adjustable strap wrench • Works in the tightest quarters • Urethane-covered, high-strength belting attached to lightweight, I-beam handle • Cam-action design permits uniform, high-torque application normal conditions, will not scratch, damage or deform polished pipe and fittings, • Under plastic pipe and fittings, oil and water filters, glass pipe, PVC conduit, or polished shafts • Also works on alternator belts, flywheels, and propeller assemblies
Cat. No. S-6H S-12H S-18H
Handle Length 6" (15.2 cm) 12" (30.5 cm) 18" (45.7 cm)
Diameter Capacity O.D. 1.5" to 5" (3.8 to 12.7 cm) 1.5" to 5" (3.8 to 12.7 cm) 1.125" to 8" (2.9 to 20.3 cm) S-12H
94
www.kleintools.com > 800-553-4676
3OLHUV
&RQVWUXFWLRQ:UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Handle Color Black Black
Handle Finish Black Oxide Black Oxide
Jaw Capacity 1-1/2" (3.8 cm) 1-7/16" (3.65 cm)
3238
Size 1/2"
Overall Length 15" (38.1 cm)
Square Nut Size Regular Nut Size
Heavy Nut Size
Taper Diameter
Overall Length
1/2" 5/8" 3/4" 7/8" 1" 7/16" — — — — — 9/16" 5/8"
Nominal Opening Head Width 7/8" 1-1/16" 1-1/4" 1-7/16" 1-5/8" 3/4" 13/16" 1" 1-1/8" 1-5/16" 1-1/2" 15/16" 1-1/16"
2.25" (5.7 cm) 2.25" (5.7 cm) 2.5" (6.4 cm) 3" (7.6 cm) 3.625" (9.2 cm) 2.25" (5.7 cm) 2.25" (5.7 cm) 2.25" (5.7 cm) 2.5" (6.4 cm) 3" (7.6 cm) 3.625" (9.2 cm) 2.25" (5.7 cm) 2.5" (6.4 cm)
7/8" to 3/16" (2.2 to 0.5 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 1" to 1/4" (2.5 to 0.6 cm) 1-1/8" to 9/32" (2.9 to 0.7 cm) 1-1/8" to 1/4" (2.9 to 0.6 cm) 7/8" x 1/2" (2.2 to 1.3 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 1" to 1/4" (2.5 to 0.6 cm) 1-1/8" to 9/32" (2.9 to 0.7 cm) 1-1/8" to 1/4" (2.9 to 0.6 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 1" to 1/4" (2.5 to 0.6 cm)
14.75" (37.5 cm) 14.75" (37.5 cm) 16.625" (42.2 cm) 17.375" (44.1 cm) 18" (45.7 cm) 14.75" (37.5 cm) 14.75" (37.5 cm) 14.75" (37.5 cm) 16.625" (42.2 cm) 17.375" (44.1 cm) 18" (45.7 cm) 14.75" (37.5 cm) 16.625" (42.2 cm)
3/4" 7/8" 1"
1-1/4" 1-7/16" 1-5/8"
2.5" (6.4 cm) 3" (7.6 cm) 3.625" (9.2 cm)
1" to 1/4" (2.5 to 0.6 cm) 1-1/8" to 9/32" (2.9 to 0.7 cm) 1-1/8" to 1/4" (2.9 to 0.6 cm)
16.625" (42.2 cm) 17.375" (44.1 cm) 18" (45.7 cm)
3RZHU7RROV DQG$FFHVVRULHV
9/16" — — — — 1/2" — — 3/4" 7/8" 1" 5/8" —
7HVWDQG 0HDVXUHPHQW
— — — — — 7/16" 1/2" 5/8 3/4" 7/8" 1" — —
9RLFH'DWD9LGHR
Nut Type U.S. Regular and Heavy U.S. Heavy U.S. Heavy U.S. Heavy U.S. Heavy U.S. Regular and Heavy U.S. Regular U.S. Regular U.S. Regular U.S. Regular U.S. Regular Utility Utility
3214TT
Spud Wrenches With Tether Hole For Working At Height
3212TT 3213TT 3214TT
U.S. Heavy U.S. Heavy U.S. Heavy
— — —
— — —
95
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
7RRO6WRUDJH
Cat. No. 3210 3211 3212 3213 3214 3219 3220 3221 3222 3223 3224 3231 3232
3231
-REVLWH $FFHVVRULHV
Spud Wrenches • Forged from select alloy steel to withstand high-leverage and heavy loads • Extra-heavy-duty head area gives maximum strength and durability taper of handle makes lining-up bolt holes easy and works on a • Continuous range of bolt-hole sizes without binding • Extra-large hub area works on larger diameter holes better than other wrenches number, bolt size and nominal opening size are stamped on every • Catalog wrench for easy identification • American Bridge design • Cat. Nos. 3212TT, 3213TT, and 3214TT feature tether hole for working at height
6DIHW\33( DQG&RPIRUW
Cat. No. 3238
7RRO.LWV
1/2" Drive Ratcheting Construction Wrench • Accepts 1/2" square-drive hex socket • Reversible ratchet • Eliminates the need for carrying several fixed-size wrenches from select alloy steel with continuous taper handle for aligning • Forged bolt and/or rivet holes • Industrial black finish for corrosion resistance
Overall Length 16" (40.6 cm) 10.94" (28 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 3239 3227
3227
'ULYHUVDQG :UHQFKHV
Extra-Wide Adjustable-Head Spud Wrenches • Eliminates the need for carrying several fixed-size wrenches Forged from select alloy steel with continuous taper handle • for aligning bolt and/or rivet holes • Industrial black finish for corrosion resistance • Includes lanyard hole for easy tool tethering jaws are individually chosen and • Precision-machines assembled by hand for smooth operation • Heat-treated for long life
HEX-KEYS
3OLHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Blade-through-handle design for high torque applications
T-handle design delivers maximum power
Ball-End
TORX®
Hex
Soft touch grips for maximum control and comfort
Chamfered end for ease of use
Tip-Ident™ sizes marked
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
™
Size laser etched on blade Convenient hang hole TORX® is a trademark of Acument Intellectual Properties, LLC.
96
www.kleintools.com > 800-553-4676
3OLHUV
+H[.H\V
6WULSSHUV&XWWHUV DQG&ULPSHUV
T-Handle Hex-Keys – SAE JTH6E15
• •
10-Pc 6" Ball-End JTH610EB
T-Handle Hex-Key Sets with Metal Stand 10-Pc 4" Hex End 10-Pc 6" Hex End JTH410E JTH610E
10-Pc 9" Hex End JTH910E
Hex Size
Short-End Drive Type
Long-End Drive Type
Blade Length
3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" 1/2"
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4"
(10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm) (10.2 cm)
— — — — — — — — — — —
—
— — — — — — — — — — —
— — — — — — — — — — —
3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" 1/2" 3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" 1/2"
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End
6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6"
(15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm)
— — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — —
—
— — — — — — — — — — — — — — — — — — — — — —
3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" 1/2"
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"
(22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm)
— — — — — — — — —
— — — — — — — — —
— — — — — — — — —
— —
— —
— —
4" Length
7RRO.LWV 6DIHW\33( DQG&RPIRUW
JTH4E06 JTH4E07 JTH4E08 JTH4E09 JTH4E10 JTH4E11 JTH4E12 JTH4E13 JTH4E14 JTH4E15 JTH4E17 6" Length
7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW
— — — — — — — — — — —
-REVLWH $FFHVVRULHV
JTH6E06 JTH6E07 JTH6E08 JTH6E09 JTH6E10 JTH6E11 JTH6E12 JTH6E13 JTH6E14 JTH6E15 JTH6E17 JTH6E06BE JTH6E07BE JTH6E08BE JTH6E09BE JTH6E10BE JTH6E11BE JTH6E12BE JTH6E13BE JTH6E14BE JTH6E15BE JTH6E17BE 9" Length
—
97
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
JTH9E06 JTH9E07 JTH9E08 JTH9E09 JTH9E10 JTH9E11 JTH9E12 JTH9E13 JTH9E14 JTH9E15 JTH9E17
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No.
'ULYHUVDQG :UHQFKHV
Includes core Journeyman™ T-handle Hex-Key features plus: Short blade-through-handle provides maximum tool versatility Set includes metal stand for convenient hanging, storage on bench or wall
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
+H[.H\V
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
T-Handle Hex-Keys – Metric Includes core Journeyman™ T-handle Hex-Key features plus: Short blade-through-handle provides maximum tool versatility Set includes metal stand for convenient hanging, storage on bench or wall
JTH6M8BE
• •
Cat. No.
8-Pc 6" Ball-End JTH68MB
Hex Size
Short Arm Drive Type
Long Arm Drive Type
Blade Length
2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
Hex Hex Hex Hex Hex Hex Hex Hex Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End
6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6"
(15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm)
— — — — — — — —
10 mm 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 8 mm
Hex Hex Hex Hex Hex Hex Hex Hex
Hex Hex Hex Hex Hex Hex Hex Hex
9" 9" 9" 9" 9" 9" 9" 9"
(22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm) (22.9 cm)
— — — — — — — —
T-Handle Hex-Key Sets with Metal Stand 8-Pc 6" Hex End 8-Pc 9" Hex End JTH68M JTH98M
6" Length
JTH6M2 JTH6M25 JTH6M3 JTH6M4 JTH6M5 JTH6M6 JTH6M8 JTH6M10 JTH6M2BE JTH6M25BE JTH6M3BE JTH6M4BE JTH6M5BE JTH6M6BE JTH6M8BE JTH6M10BE
— — — — — — — —
— — — — — — — — — — — — — — — —
9" Length
JTH9M10 JTH9M2 JTH9M25 JTH9M3 JTH9M4 JTH9M5 JTH9M6 JTH9M8
— — — — — — — —
T-Handle Hex-Keys – TORX® Includes core Journeyman™ T-handle Hex-Key features plus: Short blade-through-handle provides maximum tool versatility Set includes metal stand for convenient hanging, storage on bench or wall
• •
Cat. No.
Hex Size
JTH6T10 JTH6T15 JTH6T20 JTH6T25 JTH6T27 JTH6T30 JTH6T40
T10 T15 T20 T25 T27 T30 T40
Short Arm Drive Type Hex Hex Hex Hex Hex Hex Hex
Long Arm Drive Type TORX® TORX® TORX® TORX® TORX® TORX® TORX®
TORX® is a trademark of Acument Intellectual Properties, LLC.
98
www.kleintools.com > 800-553-4676
Blade Length 6" 6" 6" 6" 6" 6" 6"
(15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm) (15.2 cm)
JTH6T40
T-Handle Hex-Key Sets with Metal Stand 7-Pc 6" Hex End JTH67T
3OLHUV
+H[.H\V
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
Pro Folding Hex-Key Set • High-leverage blades open independently up to 270° ends are square-cut for a secure, full-depth fit and maximum • Hex-key contact with the socket to prevent slippage and stripping • Conveniently houses the most frequently used hex-key sizes in one set are made of tough, heat-treated alloy steel and range from • Blades approximately 3.5" to 4.5" (8.89 to 11.43 cm) long • Reinforced nylon handle has a sturdy, comfortable grip 70550
Size 1/2", 3/8", 5/16", 1/4", 7/32", 3/16", 5/32", 9/64", 1/8", 7/64", 3/32"
Handle Length 6.63" (16.8 cm)
Key Lengths 4" (10.2 cm)
Color Orange
Material Handle: Reinforced Nylon Keys: Alloy Steel
7RRO.LWV
Folding Hex-Key Sets • Two key positions (straight-out or right-angle) for extra leverage ends are square-cut for a secure full-depth fit and maximum contact • Hex with the hex socket to prevent slippage and stripping of the socket • TORX drive cuts slippage, saves fasteners, efficiently transmits more torque to the work • Handy sets fit in your pocket or tool box easily and help eliminate the lost key problem • Made in the USA
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 70550
®
Description 9-Key, SAE
70581
1.875 to 3" (4.8 to 7.6 cm)
Silver
70579
5-Key, 5" SAE
3/16", 7/32", 1/4", 5/16", 3/8"
5.375" (13.7 cm)
2.688 to 3.813" (6.8 to 9.7 cm)
Silver
70582
7-Key, Metric Sizes
3.703" (9.4 cm)
0.594 to 1.781" (1.5 to 4.5 cm)
Silver
70580
6-Key, Metric Sizes
1-1/2 mm, 2 mm, 2-1/2 mm, 3 mm, 4 mm, 5 mm, 6 mm 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
5.375" (13.7 cm)
2.375 to 4" (6 to 10.2 cm)
Silver
T10, T15, T20, T25, T27, T30, T40
4.375" (11.1 cm)
2.813 to 3" (7.2 to 7.6 cm)
Silver
70586
®
7-Key, Folding TORX Set
Material Handle: Alloyy Steel Keys: Alloy Steel Handle: Alloyy Steel Keys: Alloy Steel Handle: Alloyy Steel Keys: Alloy Steel Handle: Alloyy Steel Keys: Alloy Steel Handle: Alloyy Steel Keys: Alloy Steel Handle: Alloyy Steel Keys: Alloy Steel
7RRO6WRUDJH
Color Silver
-REVLWH $FFHVVRULHV
Key Lengths 2.688 to 3.813" (6.8 to 9.7 cm)
8-Key, 1/20" to 5/32" SAE
Size Handle Length 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 4.375" (11.1 cm) 7/32", 1/4" 3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" 3.063" (7.8 cm)
TORX® is a trademark of Acument Intellectual Properties, LLC.
9RLFH'DWD9LGHR
Grip-It™ Hex-Key Sets • Blades rotate independently up to 270° fit so hex tool end reduces stripping problems. Keys are industrial • Precision strength, impact-resistant and tested for performance to below freezing • Glass-reinforced nylon handle ends are square-cut for a secure full-depth fit and maximum contact with the hex socket • Hex to prevent slippage and stripping of the socket (Cat. Nos. 70573, 70574, and 70575) design allows for a thicker neck diameter increasing torque capacity, while maintaining • Ball operational angles to 25% (Cat. Nos. 70571 and 70572) • Made in the USA
6DIHW\33( DQG&RPIRUW
Cat. No. 70591
70579
Size 3/16", 7/32", 1/4", 5/16", 3/8"
Handle Length 4.438" (11.3 cm)
Key Lengths 1.547 to 2" (3.9 to 5.1 cm)
Color Yellow
70572
Grip-It™ 5-Key, Ball, Metric
5 mm, 6 mm, 7 mm, 8 mm, 10 mm
4.438" (11.3 cm)
1.594 to 1.938" (4.1 to 4.9 cm)
Red
70573
Grip-It™ 12-Key, Inch/Metric
4.438" (11.3 cm)
1.438 to 2.266" (3.7 to 5.8 cm)
Blue
70574
Grip-It™ 9-Key, with 2 Positions
4.438" (11.3 cm)
1.75 to 2.266" (4.4 to 5.8 cm)
Yellow
70575
Grip-It™ 9-Key, Square Cut
5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
3.813" (9.7 cm)
1.391 to 1.844" (3.5 to 4.7 cm)
Yellow
Material Handle: Reinforced Nylon Keys: Alloy Steel Handle: Reinforced Nylon Keys: Alloy Steel Handle: Reinforced Nylon Keys: Alloy Steel Handle: Reinforced Nylon Keys: Alloy Steel Handle: Reinforced Nylon Keys: Alloy Steel
www.kleintools.com > 800-553-4676
99
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Description Grip-It™ 5-Key, Ball, Inch
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 70571
7HVWDQG 0HDVXUHPHQW
70575
3OLHUV Top-grade alloy steel
Ball-End
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
L-Style Hex-Keys
Rust and corrosion resistant surfaces
Extra length for hard-to-reach applications
Hex
Heat-treated and tempered for added strength and durability Short length for higher torque situations and low clearances
Cat. No.
Hex Size 0.050" 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" 0.050" 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8"
Short Arm Length 0.563" (1.4 cm) 0.625" (1.6 cm) 0.688" (1.8 cm) 0.75" (1.9 cm) 0.813" (2.1 cm) 0.875" (2.2 cm) 0.938" (2.4 cm) 1" (2.5 cm) 1.125" (2.9 cm) 1.25" (3.2 cm) 1.375" (3.5 cm) 1.563" (4 cm) 1.75" (4.5 cm) 0.563" (1.4 cm) 0.625" (1.6 cm) 0.688" (1.8 cm) 0.75" (1.9 cm) 0.75" (1.9 cm) 0.875" (2.2 cm) 0.938" (2.4 cm) 1" (2.5 cm) 1.125" (2.9 cm) 1.25" (3.2 cm) 1.375" (3.5 cm) 1.563" (4 cm) 1.75" (4.5 cm)
Short Arm Drive Type Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
Long Arm Length 2.875" (7.3 cm) 3.063" (7.8 cm) 3.25" (8.3 cm) 3.5" (8.9 cm) 3.688" (9.4 cm) 3.875" (9.8 cm) 4.125" (10.5 cm) 4.375" (11.1 cm) 4.688" (11.9 cm) 5.063" (12.9 cm) 5.5" (14 cm) 6.313" (16 cm) 7.125" (18.1 cm) 2.875" (7.3 cm) 3.063" (7.8 cm) 3.25" (8.3 cm) 3.5" (8.9 cm) 3.688" (9.4 cm) 3.875" (9.8 cm) 4.125" (10.5 cm) 4.375" (11.1 cm) 4.688" (11.9 cm) 5.063" (12.9 cm) 5.813" (14.8 cm) 6.313" (16 cm) 7.125" (18.1 cm)
Long Arm Drive Type Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End
LL2 LL4 LL5 LL6 LL7 LL8 LL9 LL10 LL12 LL14 LL16 LL20 LL24 BL2 BL4 BL5 BL6 BL7 BL8 BL9 BL10 BL12 BL14 BL16 BL20 BL24
1.5 mm 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm 1.5 mm 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm
0.563" (1.4 cm) 0.688" (1.8 cm) 0.813" (2.1 cm) 0.875" (2.2 cm) 1" (2.5 cm) 1.25" (3.2 cm) 1.438" (3.7 cm) 1.688" (4.3 cm) 1.938" (4.9 cm) 0.563" (1.4 cm) 0.688" (1.8 cm) 0.813" (2.1 cm) 0.875" (2.2 cm) 1" (2.5 cm) 1.25" (3.2 cm) 1.438" (3.7 cm) 1.688" (4.3 cm) 1.938" (4.9 cm)
Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex
3.125" (7.9 cm) 3.031" (7.7 cm) 3.563" (9.1 cm) 4" (10.2 cm) 4.5" (11.4 cm) 4.875" (12.4 cm) 5.688" (14.5 cm) 6.313" (16 cm) 7.125" (18.1 cm) 3.063" (7.8 cm) 3.313" (8.4 cm) 3.563" (9.1 cm) 4" (10.2 cm) 4.5" (11.4 cm) 4.875" (12.4 cm) 5.688" (14.5 cm) 6.313" (16 cm) 6.125" (15.6 cm)
Hex Hex Hex Hex Hex Hex Hex Hex Hex Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End Ball-End
12-Pc Hex-End LLK12
— — — — — — — — — — — — — —
L-Style Hex-Key Sets 9-Pc Hex-End, Metric 12-Pc Ball-End LMK10 BLK12 — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — —
—
9-Pc Ball-End, Metric BLMK10 — — — — — — — — — — — — — — — — — — — — — — — — — —
Metric
LLM15 LLM2 LLM25 LLM3 LLM4 LLM5 LLM6 LLM8 LLM10 BLM15 BLM2 BLM25 BLM3 BLM4 BLM5 BLM6 BLM8 BLM10
100
www.kleintools.com > 800-553-4676
— — — — — — — — — — — — — — — — — —
— — — — — — — — —
— — — — — — — — — — — — — — — — — —
— — — — — — — — —
6WULSSHUV&XWWHUV DQG&ULPSHUV
'ULYHUVDQG :UHQFKHV
&RQGXLW7RROV DQG0HDVXUHPHQW
7RRO.LWV
6DIHW\33( DQG&RPIRUW
HAMMERS
3OLHUV
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
9RLFH'DWD9LGHR
7HVWDQG 0HDVXUHPHQW
3RZHU7RROV DQG$FFHVVRULHV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
+DPPHUV Electrician’s Hammers • High-strength fiberglass core for maximum shock absorption • Durable, non-slip grip for superior comfort features an engineered claw pulling feature for NMB • H80718 (Romex ) staple removal • Hang hole in handle for tethering ability and hanging storage • Available in a variety of lengths and head weights
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
®
Cat. No. H80816 H80820 H80718 H80332
®
Type Straight-Claw Straight-Claw Straight-Claw Ball-Peen
Feature Tether Hole for Hanging Tether Hole for Hanging NM-B Staple p Pulling; Tether Hole for Hanging Tether Hole for Hanging
Head Weight 16 oz (454 g) 20 oz (567 g) 18 oz (510 g)
Overall Length 12.8" (32.5 cm) 12.8" (32.5 cm) 14.8" (38 cm)
32 oz (907 g)
14.9" (38 cm)
H80816
is a registered trademark of Southwire Company.
H80718
H80820
H80332
Straight-Claw Hammers • Straight-claw design for easy nail pulling in tight quarters plastic-alloy jacketing helps to protect neck from fraying • Durable and splintering if incorrectly struck or overstruck • High-strength fiberglass shaft absorbs shock and keeps head tight • Comfortable, perforated neoprene grip bonded to handle
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
807-18
Cat. No. 807-18 808-16
Type Straight-Claw Straight-Claw
Head Weight 18 oz (510 g) 16 oz (454 g)
Lineman's Claw Milled Hammer • Large head for driving in staples and lag bolts • Milled face aids in driving staples into utility poles • Claw end for removing nails, molding, and ground wire • Lanyard hole for tethering • Fiberglass handle with textured grip to prevent slippage Cat. No. 832-26
Head Weight 26 oz (737 g)
Overall Length 15" (38.1 cm) 13" (33 cm)
832-26
Overall Length 14.84" (38 cm)
Lineman’s Straight-Claw Hammer • Heavy-duty, double-duty hammer drives lags and pulls large nails high-carbon steel head with solid, octagon-shaped driving • Special end and thick, strong claw • Straight-grain hickory handle, lacquered to withstand weather Cat. No. 832-32
102
Head Weight 32.0 oz (907 g)
Overall Length 15" (38.1 cm)
www.kleintools.com > 800-553-4676
832-32
3OLHUV
+DPPHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Feature Double-Face Milled-Face
Head Weight 36 oz (1021 g) 36 oz (1021 g)
Overall Length 14" (35.6 cm) 14" (35.6 cm)
809-36MF one side
7RRO.LWV
Non-Sparking Hammers • Brass-head hammers are non-sparking, non-marring handle includes TPR overmold • Fiberglass for extra comfort and shock absorption overstrike protector absorbs shock • Built-in and vibration when overstrike occurs • Large sweep at base prevents loss of grip • Head is securely epoxied to prevent detachment
809-36 both sides
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 809-36 809-36MF
809-36
'ULYHUVDQG :UHQFKHV
Lineman’s Double-Face Hammer • Designed for pole-line work • Rugged and well-balanced, with the weight to drive lag bolts Faces with 1-3/4" (4.4 cm) round-crown • driving surface and beveled edges One milled face for driving staples used in pole-line work and • common, unhardened nails (Cat. No. 809-36MF) • Forged, tempered-steel head is only 3-3/4" (9.5 cm) long for use in tight areas
819-03
Overall Length 15.75" (40 cm) 16" (40.6 cm)
Head Weight 3.0 lb (1.4 kg) 4.0 lb (1.8 kg)
6DIHW\33( DQG&RPIRUW
Cat. No. 819-03 819-04
-REVLWH $FFHVVRULHV
Dead Blow Hammers • Durable, abrasion resistant non-marring hammer face • Increased striking force with zero impact rebound • Design isolates user from striking impact and reduces fatigue • 40% more driving power than other dead blow hammers • Protects job surface from damage 811-16
Head Weight 16 oz (454 g) 32 oz (907 g)
7RRO6WRUDJH
Cat. No. 811-16 811-32
Overall Length 12.5" (31.8 cm) 18" (45.7 cm)
9RLFH'DWD9LGHR
Brass Sledge Hammers – Fiberglass Rubber Grip Handle
Head Weight 7 lb (3.2 kg) 10 lb (4.5 kg) 4 lb (1.8 kg) 14 lb (6.4 kg)
Overall Length 32" (81.3 cm) 36" (91.4 cm) 16" (40.6 cm) 36" (91.4 cm)
www.kleintools.com > 800-553-4676
103
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Cat. No. 7HBRFRH07 7HBRFRH10 7HBRFRH04 7HBRFRH14
3RZHU7RROV DQG$FFHVVRULHV
• Used in non-sparking environments or to avoid damage to struck objects • Head forged from brass for softer, non-damaging blow • Head is pinned to handle as well as epoxied to prevent head coming off • Comfortable, thick rubber grip handle for increased protection from shock and vibration • Handle includes both overstrike protection and large sweep at base to prevent loss of grip
7HVWDQG 0HDVXUHPHQW
7HBRFRH14
UTILITY STAPLERS
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH
Dropped staples Hurt fingers Punctured gloves
Utility Staple Starter and Staples manual staple starter designed to install • Heavy-duty, ground wire and molding on utility poles use with Klein heavy-duty 2" x 1" staples (Cat. No. STP001) • For as well as current market staples • Top loading for quick staple reloads and less dropped staples • Holds up to 35 to 40 staples; enough to finish one pole installation • Durable steel and aluminum construction for optimal performance • Bottom stop to prevent driving staples too deep • Built-in ruler provides an easy way to measure spacing of staples • Jam release to remove bent staples • Staple holder automatically loads the next staple for smooth operation • D-ring for hanging and storage feature a hybrid design that fits all ground wire sizes and ground • Staples molding reducing the number of staples needed to carry – sold separately
Cat. No. STP100 STP001
Description Utility Staple Starter Collated Staples, packs of 15, total case size of 480 staples
3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
STP001
Staples sold separately
• Collated into packs of 15 to minimize loading time • Steel construction for durability
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
NO MORE...
104
www.kleintools.com > 800-553-4676
STP100
CHISELS& PUNCHES
&RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
Overall Length 5" (12.7 cm) 6" (15.2 cm) 6.5" (16.5 cm) 7.5" (19.1 cm) 8" (20.3 cm) 8.5" (21.6 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm)
6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
Blade Width 0.375" (1 cm) 0.5" (1.3 cm) 0.625" (1.6 cm) 0.75" (1.9 cm) 0.875" (2.2 cm) 1" (2.5 cm) 0.5" (1.3 cm) 0.75" (1.9 cm) 1" (2.5 cm)
7RRO6WRUDJH
Electrician’s Chisel • One-piece handle and blade forged of strong alloy steel • Corrosion-resistant black finish extends to the polished blade edge Overall Length 8" (20.3 cm)
66100
9RLFH'DWD9LGHR
Blade Width 2.75" (7 cm)
'ULYHUVDQG :UHQFKHV
Cat. No. 66140 66142 66143 66144 66145 66146 66174 66177 66183
66177
Cat. No. 66100
6WULSSHUV&XWWHUV DQG&ULPSHUV
66142
3OLHUV
Cold Chisels • Heat-treated, high-carbon steel for necessary hardness and durability • Cuts, shapes and removes metal • Corrosion-resistant black finish • Long length works better in hard-to-reach areas (Cat. Nos. 66174, 66177 and 66183)
7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
105
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
Punches • High-carbon steel for durability • Rugged design for impact strength for added strength • Heat-treated and hardness at working end • Corrosion-resistant black finish
66324
66313
66343
Cat. No. 66310 66311 66312 66313 66320 66321 66322 66323 66324 66325 66340 66342 66343 66344
Punch Type Center Punch Center Punch Center Punch Center Punch Pin Punch Pin Punch Pin Punch Pin Punch Pin Punch Pin Punch Drift Punch Drift Punch Drift Punch Drift Punch
Point Diameter 1/4" (6.4 mm) 5/16" (7.9 mm) 3/8" (9.5 mm) 1/2" (12.7 mm) 1/16" (1.59 mm) 3/32" (2.4 mm) 1/8" (3.18 mm) 5/32" (3.97 mm) 3/16" (4.76 mm) 1/4" (6.4 mm) 1/8" (3.18 mm) 3/16" (4.76 mm) 1/4" (6.35 mm) 5/16" (7.94 mm)
Overall Length 4.25" (10.8 cm) 4.5" (11.4 cm) 5" (12.7 cm) 6" (15.2 cm) 4.25" (10.8 cm) 4.75" (12.1 cm) 5" (12.7 cm) 5.25" (13.3 cm) 5.5" (14 cm) 7" (17.8 cm) 8" (20.3 cm) 9" (22.9 cm) 11" (27.9 cm) 11" (27.9 cm)
Wire Rope Punches • Used to safely drive out pins and keys in machinery • Long, two-handed rubber handle to lessen shocks from blows • Head attached with wire rope to reduce shock • Urethane ring around head to reduce likelihood of chipping • Heat-treated so it will not shatter • Precision heat treated to prevent shattering
7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
106
Point Diameter 1/2" (12.7 mm) 5/8" (15.88 mm) 3/4" (19.05 mm) 7/8" (22.23 mm) 1" (25.4 mm) 1-1/4" (31.75 mm)
Shank Length 4.75" (12.1 cm) 4.75" (12.1 cm) 4.75" (12.1 cm) 4.75" (12.1 cm) 4.75" (12.1 cm) 4.75" (12.1 cm)
www.kleintools.com > 800-553-4676
• • • •
occur from using a hardened punch Selected brass, correct composition for punch use Knurled handle for gripping easily Chamfered head for safety Sold in sets only
Cat. No. 4BPSET5
Overall Length 20" (50.8 cm) 20" (50.8 cm) 20" (50.8 cm) 20" (50.8 cm) 20" (50.8 cm) 20" (50.8 cm)
4BPSET5
Kit Contains Point Diameter 3/8" (9.5 mm) 1/2" (12.7 mm) 5/8" (15.9 mm) 3/4" (19.1 mm) 1" (25.4 mm)
Overall Length 6" (15.2 cm) 7" (17.8 cm) 7" (17.8 cm) 8" (20.3 cm) 8" (20.3 cm)
Pin Punches for driving out and removing • Used pins and keys and resilient shaft made from • Tough quality tool steel • Heat treated for durability and strength • Soft head for safety; will mushroom, not chip • Knurled handle for gripping easily • Sold in sets only
4PPLSET8
Kit Contains Point Diameter 1/16" (2.4 mm) 1/8" (2.8 mm) 3/16" (4.76 mm) 3/16" (4.76 mm) 1/4" (6.35 mm) 1/4" (6.35 mm) 5/16" (7.9 mm) 3/8" (9.9 mm)
7WRP22
Cat. No. 7WRP13 7WRP16 7WRP19 7WRP22 7WRP25 7WRP32
Brass Punches Used where a softer punch is • needed, e.g. where damage may
Cat. No. 4PPLSET8
9RLFH'DWD9LGHR
7RRO6WRUDJH
&KLVHOV 3XQFKHV
Overall Length 2.156" (5.5 cm) 2.156" (5.5 cm) 2.359" (6 cm) 2.547" (6.5 cm) 2.547" (6.5 cm) 2.547" (6.5 cm) 2.75" (7 cm) 2.75" (7 cm)
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
&RQGXLW7RROV 3LSH7RROV /HYHOV 'LJLWDO0HDVXULQJ
3RZHU7RROV DQG$FFHVVRULHV
7DSH0HDVXUHV
7HVWDQG 0HDVXUHPHQW
Klein Tools has a complete line of conduit and measurement tools. A variety of precise and easy to use levels and tape measurers for any layout application, and conduit and wire pulling tools that save time, effort and materials.
:LUH3XOOLQJ
9RLFH'DWD9LGHR
PIPE AND MEASUREMENT
)LVK5RGV
7RRO6WRUDJH
)LVK7DSHV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
108
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW 9RLFH'DWD9LGHR
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 3OLHUV
FISH TAPES
7RRO6WRUDJH
3OLHUV
Fish Tapes
49’
Laser etched markings in 1' (0.3 m) increments allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out
'ULYHUVDQG :UHQFKHV
Multi-grip handle gives you a firm, steady grip as you pull tape from the case
6WULSSHUV&XWWHUV DQG&ULPSHUV
50’
Designed to decrease payout effort by optimizing the tape payout angle
&RQGXLW7RROV DQG0HDVXUHPHQW
Slip-resistant housing geometry improves winding power and reduces binding Unique, low friction case reduces binding
7RRO.LWV
Polypropylene case and handle offer impact resistance Available in steel, fiberglass, and stainless steel with a wide variety of tips
6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
Multi-Groove Fiberglass Fish Tapes • Rigidity for long distance • Less surface contact when pushing through crowded conduit for smoother tape feeding • Durable 7" (17.9 cm) leader helps push through crowded conduit • Available resin eyelet for total non-conductivity • Repair kits (Cat. Nos. 56115 and 56025) available to replace tips metal eyelets (Cat. No. 56116) and spiral steel leaders • Replacement (Cat No 56120) available
7RRO6WRUDJH
Multi-Groove Profile
Cat. No.
Tape Size
56382
7HVWDQG 0HDVXUHPHQW
Less surface contact with wires
9RLFH'DWD9LGHR
Fiberglass Profile
56380
Diameter
7" (178 mm) Spiral Steel Leader
100' x 3/16" (30.5 m x 0.5 cm) 200' x 3/16" (61.0 m x 0.5 cm)
13" (33 cm) 17" (43.2 cm)
7" (17.9 cm) spiral steel leader
13" (33 cm) 13" (33 cm) 17" (43.2 cm)
Fish tape tip with non-conductive eyelet
3RZHU7RROV DQG$FFHVVRULHV
56380 56056
Non-Conductive Nylon Eyelet
56382 56383 56059
50' x 3/16" (15.2 m x 0.5 cm) 100' x 3/16" (30.5 m x 0.5 cm) 200' x 3/16" (61.0 m x 0.5 cm)
109
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
)LVK7DSHV Fiberglass Fish Tapes • Designed for flexibility and easy navigation through conduit runs • Non-conductive, fiberglass fish tape slides easily over existing wires and through multiple bends • Durable 7" (17.9 cm) leader helps push through crowded conduit lightweight and strong fiberglass composite tape resists harsh elements and is strength • The rated up to 500 pulling pounds • Repair kit (Cat. No. 56115) available to replace tips • Replacement metal eyelets (Cat. No. 56116) and spiral steel leaders (Cat. No. 56120) available 49’
50’
7" (17.9 cm) spiral steel leader
Cat. No. 56350 56351 56014
56014
1' (30.5 cm) permanent laser etched descending increments
Tape Size 50' x 3/16" (15.2 m x 0.5 cm) 100' x 3/16" (30.5 m x 0.5 cm) 200' x 3/16" (60.96 m x 0.5 cm)
Diameter 13" (33 cm) 13" (33 cm) 17" (43.2 cm)
Steel Fish Tapes • Stainless Steel fish tape is corrosion resistant extending the life of the tape (Cat. No. 56341) • Durable, high strength 1/8" (3.2 mm) wide spring steel fish tapes are firm yet flexible for long runs and large wire pulls • Double-Loop creates a stronger end for maneuvering through conduit • Full grip style handle gives you a firm, steady grip as you pull tape from the case high quality tape keeps its stability as it glides between surfaces for effective pushing • Tempered, and pulling of wire under carpets, through insulated walls and over suspended ceilings 25' (7.6 m) length with slim-profile plastic tip has protective coating to reduce non-contact moisture • and humidity but keeps the steel dry to touch (Cat. No. 56335) Cat. No.
7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
56331
56334
Tape Size
Diameter
Tape End
13" (33 cm)
Double Loop Steel
7" (17.8 cm) 9" (22.9 cm) 13" (33 cm) 13" (33 cm)
Double Loop Steel Double Loop Steel Double Loop Steel Double Loop Steel
7" (17.8 cm)
Plastic Slim Tip
1/8" Wide Stainless Steel Fish Tape
56341
240' x 1/8" x 0.062" (73.2 m x 0.3 cm x 0.2 cm)
Double-loop tip side profile
1/8" Wide Steel Fish Tapes
56331 56002 56333 56334
50' x 1/8" x 0.045" (15.2 m x 0.3 cm x 0.1 cm) 65' x 1/8" x 0.062" (19.8 m x 0.3 cm x 0.2 cm) 120' x 1/8" x 0.062" (36.6 m x 0.3 cm x 0.2 cm) 240' x 1/8" x 0.062" (73.2 m x 0.3 cm x 0.2 cm)
1/4" Wide Steel Fish Tape
56335
25' x 1/4" x 0.03" (7.6 m x 0.6 cm x 0.08 cm)
Slim-profile plastic tip (Cat. No. 56335) 1' permanent laser etched descending increments.
Glow Fish Tape • Unique Glow-in-the-Dark fiberglass tape and nylon tip Fully removable from case for more versatile application such as pass-through wire • feeding; alignment mark on case makes for easy re-installation into housing end utilizes stainless steel connector that is compatible with • Anchoring Klein Fish Rod attachments (see Cat. No. 56511) • Narrow, eyelet tip for easy feeding through crowded spaces • Patent pending Cat. No. 50550
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
56350
110
Tape Size 20' x 0.153" (6.1 m x 3.9 mm)
Diameter 7.5" (19.1 cm)
www.kleintools.com > 800-553-4676
50550
56335
3OLHUV
)LVK7DSH$FFHVVRULHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
Fiberglass Fish Tape Repair Kit high leverage ratcheting crimper, two replacement eyelets, two 7" (17.8 cm) spiral • Contains steel replacement leaders, one tube of quick dry glue and comprehensive instructions ratcheting crimper (Cat. No. 56115V) cuts tape cleanly, strips tapes and • Multi-function crimps on new attachments • Newly crimped on eyelets meet or exceed original factory pulling strength requirements • Protective carry case firmly holds all tools and additional parts in handy, organized compartments No. 56025 is for repairing non-conductive fiberglass fish tapes (Cat. No. 56382, • Cat. 56383, 56059) 56115
Included (1) High Leverage Crimper, (2) 7" (17.8 cm) Flexible Leaders, (2) Eyelets, (1) Tube Quick-Drying Glue (2) Non-Conductive Eyelets, (1) Tube Quick-Drying Glue
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 56115 56025
7RRO.LWV
Replacement Spiral Steel Flexible Leaders and Eyelets • For use with all fiberglass fish tapes • Non-conductive resin eyelets (Cat. No. 56116) • Attach with Klein Tools ratcheting crimper (Cat. No. 56115V) available in kit 56115 only Description Fiberglass Fish Tape Replacement Leaders Fiberglass Fish Tape Replacement Eyelets
Diameter 0.188" (0.5 cm) 0.188" (0.5 cm)
Package Quantity 2 6
6DIHW\33( DQG&RPIRUW
Cat. No. 56120 56116
56120
Overall Length 8.938" (22.7 cm) 1.5" (3.8 cm)
56116
-REVLWH $FFHVVRULHV
Cat. No. 50351
Diameter 3/16" (0.5 cm)
Overall Length 1.5" (3.8 cm)
9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 50350
Cat. No. 50350
Diameter 3/16" (0.5 cm)
Overall Length 13.5" (34.3 cm)
111
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
13" (330 mm) Flexible Spiral Steel Leader for Steel Fish Tapes • For use with 1/8" (0.3 cm) wide steel fish tapes • Heavy-Duty construction is strength rated up to 250 pulling pounds • High capacity eyelet holds up to five #12 unstripped wires and seven #10 bare wires 3/16" (0.5 cm) diameter tape has a rustproof inner steel cable • The core wrapped with a spiral cover for exceptional flexibility leader guides steel tapes through 90° bends • Flexible and makes pulling and pushing flat steel tapes easier • Retrofit instructions included
50351
7RRO6WRUDJH
Steel Fish Tape Swivel Eyelet • For use with 1/8" (0.3 cm) wide steel fish tapes • Swivel head design helps prevent kinks and allows smoother, easier fishing in tight turns • High capacity eyelet holds up to five #12 unstripped wires or seven #10 bare wires • High strength steel construction allows for optimal performance over repeated uses • Retrofit instructions included
FISH RODS
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW
d connectors to attach to Rods have threaded bevele gging on obstructions sna t desired length and preven
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
Exclusive Splinter Guard™ protection from painful fiberglass splinters
Luminescent glow rods provide added visibility in dark work spaces Shines 2X brighter and lasts 2X longer than ordinary glow rods
Splinter Guard™ Fish and Glow Rod Kit • Kit includes: 8 Splinter Guard™ fish and glow rods, 7 attachments and 1 carrying bag Two 48" (1.2 m) long, 1/4" (0.6 cm) diameter Low-Flex Fish rods, two 18" (45.7 cm) long and two 60" (1.5 m) long 3/16" (0.5 cm) diameter Mid-Flex Glow rods, • 8twoRods: 72" (1.8 m) long 5/32" (0.4 cm) diameter Hi-Flex Glow rods • 7 Attachments: Whisk, Double-S Hook, Magnet, Chain, Bullet Nose, Single Hook, and Twin Hook (also sold separately, Cat. No. 56511) • Rods have durable, stainless steel connectors and Splinter Guard™ protective coating to keep hands free of fiberglass splinters • Rotate the innovative new Double-S Hook to secure wires within its prongs for difficult pulling applications (Patent Pending) • Attachments fit all Klein Splinter Guard™ fish and glow rods • Luminescent rods Glow-in-the-Dark and are rechargeable in most available light Adjustable carrying bag is constructed of durable • 1680d material with a reinforced bottom and a heavy-duty zipper, accommodates 4', 5', and 6' (1.2 m, 1.5 m, 1.8 m) rods and has two exterior zipper pockets for shorter rods, leaders and attachments (also sold separately, Cat. No. 56401)
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
LO flex – long, straight feeding HIGH flex – tight bends in walls MID flex – all needs in between
56400
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Cat. No. 56400
112
Diameter 1/4", 3/16", 5/32" (0.6, 0.5, 0.4 cm)
www.kleintools.com > 800-553-4676
Included 8 Rods, 7 Attachments, 1 Bag
Overall Length 76" (193 cm)
3OLHUV
)LVK5RGV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Fish and Glow Rods • Variety of flexibilities and lengths for any application such as walls, drop ceilings, attics, crawl spaces, etc. • Sets include bull nose and hook attachments to attach and grab wires • Cat. No. 56430 also includes illuminated tip 56418
Description Lo-Flex Fish Rod Set, w/Splinter Guard™ Coating, 12' Lo-Flex Fish Rod Set, w/Splinter Guard™ Coating, 24' Fish and Glow Rod Set, w/Splinter Guard™ Coating, 25' Hi-Flex Glow Rod w/Splinter Guard™ Coating, 6' Mid-Flex Glow Rod Set, w/Splinter Guard™ Coating, 9' Mid-Flex Glow Rod Set, w/Splinter Guard™ Coating, 15' Hi-Flex Glow Rod Set, w/Splinter Guard™ Coating, 18' Glow Rod Set, w/Splinter Guard™ Coating, 30'
Diameter 1/4" (0.6 cm) 1/4" (0.6 cm) 3/16", 1/4" (0.6 and 0.5 cm) 5/32" (0.4 cm) 3/16" (0.5 cm) 3/16" (0.5 cm) 5/32" (0.4 cm) 3/16" (0.5 cm)
Cat. No. 56401
Overall Width 3.5" (8.9 cm)
Overall Height 5" (12.7 cm)
Overall Length 76" (193 cm)
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
56511
Cat. No. Kit Contains 56511 Fish Rod Attachment Set, 7-Piece Description
56512 56513 56514 56515 56516 56517
Double-S Hook Fish Rod Attachment Whisk Replacement Part, Fish Rod Attachment Chain Replacement Part, Fish Rod Attachment Magnet Replacement Part, Fish Rod Attachment Twin Hook Replacement Part, Fish Rod Attachment Single Hook and Bullet Fish Rod Attachments
Cat. No. 56119
Diameter 0.578" (1.5 cm)
3RZHU7RROV DQG$FFHVVRULHV
56119
7HVWDQG 0HDVXUHPHQW
Cat. No.
9RLFH'DWD9LGHR
Overall Length 2.5" (6.4 cm)
www.kleintools.com > 800-553-4676
113
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Illuminated Fish Rod Tip • Lights up for maximum visibility in dark spaces • Bright white, omni-directional LED light for long life • Threaded top for hook or bullet nose attachment (not included) • Fits drilled holes as small as 5/8" (1.6 cm) • Compatible with LO, MID and HIGH flex rods • Replaceable batteries included • US Patent 9,062,834
56401
6DIHW\33( DQG&RPIRUW
Fish Rod Attachment Set • Fit all Klein Splinter Guard rods attachments: Whisk, Double-S hook, Bullet nose, • 7Twin hook, Single hook, Magnet, Chain new Double-S hook grabs and secures wire • Innovative and cable in difficult pulling applications (Patent Pending) can be used alone or in conjunction with any of the • Whisk attachments to guide rods over and past obstacles • Magnet attaches to the chain to retrieve wire in blind applications • Bullet Nose allows easy pulling with the line attachment hole • Single Hook easily grabs and retrieves wires • Twin Hook is a grappling-style tool for difficult wire retrieval • Includes hard plastic carrying case • Items also sold separately
7RRO.LWV
Fish Rod Carrying Bag • Store and protect all your rods and accessories in one place • Constructed of durable 1680d material with a reinforced base • Shoulder strap adjusts for easy carrying • Adjustable bag accommodates 4', 5', and 6' (1.2 m, 1.5 m, 1.8 m) rods • Exterior pockets for 18" (45.72 cm) rods • Easily accessible exterior pocket for accessories • Main compartment with a tough zipper closure
Included (3) 4' (1.2 m) Fish Rods with Bullet Nose and Hook Attachments (4) 6' (1.5 m) Fish Rods with Bullet Nose and Hook Attachments (5) 4' (1.2 m) Lo-Flex Fish Rods, (1) 5' (1.3 m) Mid-Flex Glow Rod with Bullet Nose and Hook Attachments (1) 6' (1.8 m) Glow Rod with Bullet Nose (6) 18" (45.7 cm) Glow Rods with Bullet Nose and Hook Attachments (3) 5' (1.5 m) Glow Rods with Bullet Nose and Hook Attachments (3) 6' (1.8 m) Glow Rods with Bullet Nose and Hook Attachments (6) 5' (1.5 m) Glow Rods with Bullet Nose, Hook, and LED-Illuminated Tip Attachments
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 56312 56324 56325 56406 56409 56415 56418 56430
'ULYHUVDQG :UHQFKHV
56325
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
WireSpanner™ — Telescopic Pole 18' (5.4 m)
• Extends to 18' (5.4 m) in 10 seconds • Easily retrieve cable from a distance without needing an extra pair of hands to shorten installation time • Large hook attachment pulls multiple wires easily • Friction-twist lock pole design stays locked in place Cat. No. • Lightweight resin slides easily over obstructions SRS56036 Compact design retracts to 32" (81.2 cm) for easy storage •
Magnetic Wire Pulling System This system allows you to effortlessly pull cable • behind walls by yourself • Navigates through insulation and other obstructions for routing cable between drywall and • Perfect insulation or fixture installations leader eyelet securely connects to most • Swivel wires and mesh wire pulling grips Non-marring nylon leader-pull with 20' (6.1 m) of • heavy-duty nylon rope eyelet for wire tie-on
SRS56036
Collapsed Length 32" (0.8 m)
Overall Length 18' (5.5 m)
SRS56037
Cat. No. SRS56037
Overall Length 20' (6.1 m )
Deluxe Fish Rod Set and Mega Fish Rod Set • Splinter resistant rods in a variety of flexibilities • Crimped fittings for added strength and functionality • 3X swivel rods in Mega Set accept twists in cable run fittings on the end of each rod are mechanically • AXM crimped to carry a load of 550 lb (250 kg) set has an extensive range of attachments • Each for all of your wire pulling needs
Glow-in-the-Dark Leaders • Non-conductive rods designed for working in confined spaces • Great for routing cables in wire racks and on short runs • Attachments Glow-in-the-Dark for ease of use Includes 14" (35.6 cm) rods of various flexibilities and • illumination for a range of individual (or 4'8" (1.4 m) combined) wire pulling applications
five Glow-in-the-Dark leaders (hook, • Includes bullet, mini-eyelet, domed-eyelet and claw) Convenient storage tube protects the rods between • use and fits easily into your bag or toolbox
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
)LVK5RGVDQG:LUH3XOOLQJ7RROV
5 Attachments Included
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
Hook
Bullet
Mini-Eyelet Domed-Eyelet
Claw SRS56038
Cat. No. SRS56980 SRS56981
114
Included 10 Rods, 8 Attachments, 1 Carrying Tube 13 Rods, 3 Swivel Rods, 12 Attachments, 5 Glow Attachments, 1 Carrying Tube
www.kleintools.com > 800-553-4676
Overall Length 33' (10 m) 52' (16 m)
Cat. No. SRS56038
Included (4) Fish Rods, (5) Attachment Heads
Overall Length 4' 8" (1.4 m)
3OLHUV
:LUH3XOOLQJDQG:LUH3XOOLQJ/XEULFDQWV
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
Magnetic Wire Puller • Magnetic wire puller quickly and easily fishes wire and cable behind finished wa • High strength, Rare-Earth magnets provide strong hold for easy wire and cable • Magnetic handheld unit features easy rolling mar-resistant wheels, reducing ma • 180° pivot handle with a comfort grip provides easy control and maneuverability • In-wall unit consists of strong Rare-Earth magnets and flexible stainless-steel le • Hard plastic carrying case securely stores both units • Doubles as a metal stud finder with marking notches on all four sides of handhe
&RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW
Cat. No. 50611
Description Magnetic Wire Puller
Case Dimensions 3.2" × 4.7" × 11.0" (8.1 × 11.9 × 27.9 cm)
Replacement Part
-REVLWH $FFHVVRULHV
Magnetic Wire Puller Replacement Leader
Working Temperature 40° F to 100° F (4° C to 38° C)
Weight 1.2 lb (0.5 kg)
WARNING:
9RLFH'DWD9LGHR
Cat. No. Size Container 51100 19 oz (0.6 L) Aerosol Can
7RRO6WRUDJH
* Based on job site pulls with foam in 3/4" conduit when used as directed.
LING COM UL
UND PO
Wire Pulling Foam Lubricant • NO DRIPS! NO STAINS! NO MESS! • One can equals one gallon or 4 quarts of wax/gel lubricants* • Foam lubricant is applied directly into the conduit. No need to pre-coat wires • No mess formula stays where it is applied, even in vertical conduit • Dissolves clean from hands and clothing
WIRE P
50611ML
• Contents under pressure. Do not expose container to direct sunlight or temperatures above 120°F (48.9°C). Do not transport or store near heat sources. Keep cans dry and away from sources of ignition. If frozen, gradually warm to room temperature. • Do not use wet product on live circuits. Compound is electrically conductive before it dries.
7HVWDQG 0HDVXUHPHQW
Cat. No. 51028
Size 1 Quart (0.9 L)
Container Squeeze Bottle
Working Temperature 20° F to 122° F (-6° C to 50° C)
3RZHU7RROV DQG$FFHVVRULHV
One-Quart Premium Synthetic Clear • Designed for use primarily in finished workspaces (for example around painted walls and carpeted floors) • The crystal clear formulation is easy to clean-up and will not stain • Excellent all purpose lubricant for electrical or datacom applications • Compatible with most types of cable jackets • Will not separate out in hot environments or when exposed to freezing temperatures Weight 2.3 lb (1 kg)
www.kleintools.com > 800-553-4676
115
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
51028
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH 9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
:LUH3XOOLQJ/XEULFDQWVDQG:LUH3XOOLQJ6XSSOLHV Premium Synthetic Wax • High performance lubricant for general electrical and utility applications • Temperature stable and does not liquify and drop off after high temperature exposure • Compatible with most types of cable, including low density polyethylene • Superior “clingability” coats wires and conduit evenly • Exceptional lubricity • Non-staining, slow-drying, easy clean-up formula Cat. No. 51010 51012 51013 56117
Size 1 Quart (0.9 L) 1 Gallon (3.8 L) 5 Gallon (18.9 L) 1 Quart (0.9 L)
Container Squeeze Bottle Bucket Bucket Squeeze Bottle - 6-Pack
Working Temperature 20° F to 122° F (-6° C to 50° C) 20° F to 122° F (-6° C to 50° C) 20° F to 122° F (-6° C to 50° C) 20° F to 122° F (-6° C to 50° C)
Weight 2.3 lb (1 kg) 8.8 lb (4 kg) 44 lb (20 kg) 13.5 lb (6.1 kg)
51010
51012
Premium Synthetic Polymer • Excellent all-purpose lubricant for electrical, telecommunications and data applications • Easy-to-apply gel evenly clings instantly to the cable for easy handling and application • Compatible with most types of cable, including polyethylene and semi conducting jackets • Superior “clingability” coats wires and conduit evenly • Non-staining, slow-drying, easy clean-up formula Cat. No. 51015 51017 51018
Size 1 Quart (0.9 L) 1 Gallon (3.8 L) 5 Gallon (18.9 L)
Container Squeeze Bottle Bucket Bucket
Working Temperature 20° F to 140° F (-6° C to 60° C) 20° F to 140° F (-6° C to 60° C) 20° F to 140° F (-6° C to 60° C)
Weight 2.3 lb (1 kg) 8.8 lb (4 kg) 44 lb (20 kg)
51015
51017
Poly Pull Line • Use polypropylene line with manual or power fishing systems for light duty cable or rope pulling applications • Ready to use storage containers quickly dispense a tangle free line and also protects line from direct sunlight • Line is resistant to rot and mildew • Up to 210 lb (95.2 kg) average breaking strength Cat. No. 56108 56110
Container One-Quart Size w/Locking Lid Five-Gallon Bucket
Tensile Strength 210 lb (95.2 kg) 210 lb (95.2 kg)
Overall Length 500' (152 m) 6500' (2 km)
Weight 1 lb (0.5 kg) 11 lb (5.0 kg)
WARNING: Children can fall into bucket and drown. Keep children away from bucket with even a small amount of liquid.
56108
Wire Marker Books • Larger, easy-to-read print • More pages of the frequently used low numbers (1-24) • Each page is perforated so that a third, two-thirds or the entire page can be easily detached • Strong tack for lasting adhesion on oily wires • Markers are a vinyl coated white cloth, 8 mils thick Cat. No. 56250 56251
Description Wire Marker Book, 1-48 Wire Marker Book, 120/240V 3 Phase 1-48
56252
Wire Marker Book, 277/480V 3 Phase 1-48
56253 56254 56255
Wire Marker Book, Black Letters, Numbers and Symbols Wire Marker Book, Household Electrical Panel Wire Marker Book, Household Electric Panel w/Directory
116
www.kleintools.com > 800-553-4676
Color Black Print on White Black, Blue, Red Printed on White Brown, Orange, g Yellow Print on White Black Print on White Black Print on White Black Print on White
Number of Pages 14 14
Overall Width 3.328" (8.5 cm) 3.328" (8.5 cm)
Overall Length 5.5" (14 cm) 5.5" (14 cm)
14
3.328" (8.5 cm)
5.5" (14 cm)
10 10 10
3.328" (8.5 cm) 3.328" (8.5 cm) 3.625" (9.2 cm)
5.5" (14 cm) 5.5" (14 cm) 6.375" (16.2 cm)
56110
6WULSSHUV&XWWHUV DQG&ULPSHUV
'ULYHUVDQG :UHQFKHV
&RQGXLW7RROV DQG0HDVXUHPHQW
7RRO.LWV
6DIHW\33( DQG&RPIRUW
-REVLWH $FFHVVRULHV
7RRO6WRUDJH
9RLFH'DWD9LGHR
7HVWDQG 0HDVXUHPHQW
3RZHU7RROV DQG$FFHVVRULHV
CONDUIT/PIPE TOOLS
3OLHUV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3OLHUV
Conduit Benders
6WULSSHUV&XWWHUV DQG&ULPSHUV
with patented Angle Setter™ technology increases conduit bending accuracy while reducing bending time
7+(75$',7,21$/%(1),(/'ȗ+($''(6,*1 accurately and consistently performs common bends such as Stub Ups, Offsets, Back-to-Back and Saddle Bends Convenient storage for Angle Setter™ within bender head
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
Wide foot pedal provides excellent stability, leverage and comfort Interior hook surface and conduit track prevents conduit from rolling or twisting during bends
Bold cast-in symbols, degree scales, multiplier scales and center of bend marks help save time on the job
Easily visible arrow for ease of alignment on conduit marks
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
86(7+($1*/(6(77(5ȗ)25rrr$1'r%(1'6 1
2
4
3
Angle Setter™ creates a hard stop for quick, accurate, and consistent floor or air bends
Conduit Benders Includes core Conduit Bender features plus: Lightweight die-cast aluminum construction High strength steel handle features a swaged end for inserting conduit to correct overbends (Cat. Nos. 51603, 51604, 51608, 51609)
• •
56211
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
51603
Cat. No. Description Assembled Conduit Benders 51603 Iron Conduit Bender w/ Angle Setter™, 1/2" EMT
Material
Centerline Bend Radius Thinwall/EMT
Iron
4-5/8"
1/2" (1.3 cm)
Rigid/IMC —
51604
Iron Conduit Bender w/ Angle Setter™, 3/4" EMT
Iron
5-1/2"
3/4" (1.9 cm)
1/2" (1.3 cm)
51605
Iron Conduit Bender w/ Angle Setter™, 1" EMT
Iron
7-3/8"
1" (2.5 cm)
3/4" (1.9 cm)
51606
Aluminum Conduit Bender w/ Angle Setter™, 1/2" EMT
Aluminum
4-5/8"
1/2" (1.3 cm)
51607
Aluminum Conduit Bender w/ Angle Setter™, 3/4" EMT
Aluminum
5-1/2"
3/4" (1.9 cm)
1/2" (1.3 cm)
Iron Iron Iron Iron
4-5/8" 5-1/2" 7-3/8" —
1/2" (1.3 cm) 3/4" (1.9 cm) 1" (2.5 cm) 1-1/4" (3.2 cm)
— 1/2" (1.3 cm) 3/4" (1.9 cm) 1" (2.5 cm)
Conduit Bender Heads 51608 Iron Conduit Bender Head, 1/2" EMT 51609 Iron Conduit Bender Head, 3/4" EMT 51610 Iron Conduit Bender Head, 1" EMT 56211 Iron Conduit Bender Head, 1-1/4” EMT Replacement Angle Setters™ 51611 1/2" Angle Setter™ (2 pack)
Delrin® Plastic
—
1/2" (1.3 cm)
—
—
51612
3/4" Angle Setter™ (2 pack)
Delrin® Plastic
—
3/4" (1.9 cm)
1/2" (1.3 cm)
51613
1" Angle Setter™ (2 pack)
Delrin® Plastic
—
1" (2.5 cm)
3/4" (1.9 cm)
®
Delrin is a registered trademark of DuPont Polymers, Inc.
118
www.kleintools.com > 800-553-4676
Included/For Use With Includes Head ((Cat. No. 51608),) Handle (Cat. No. 51427), Angle Setter™ (Cat. No. 51611) Includes Head ((Cat. No. 51609),) Handle (Cat. No. 51427), Angle Setter™ (Cat. No. 51612) Includes Head ((Cat. No. 51610),) Handle (Cat. No. 51428), Angle Setter™ (Cat. No. 51613) Includes Aluminum Head, Handle (Cat. No. 51427), Angle Setter™ (Cat. No. 51611) Includes Aluminum Head, Handle (Cat. No. 51427), Angle Setter™ (Cat. No. 51612) For Use With Angle Setter™ Cat. No. 51611 For Use With Angle Setter™ Cat. No. 51612 For Use With Angle Setter™ Cat. No. 51613 — For Use With Conduit Benders Cat. Nos. 51603, 51606; Conduit Bender Head Cat. No. 51608 For Use With Conduit Benders Cat. Nos. 51604, 51607; Conduit Bender Head Cat. No. 51609 For Use With Conduit Bender Cat. No. 51605; Conduit Bender Head Cat. No. 51610
3OLHUV
&RQGXLW7RROV
51427
Cat. No. 51427 51428 51429
For Use With
Overall Length 1/2" and 3/4" Bender Heads (Cat. No. 51608 and 51609) 38" (96.5 cm) 1" Bender Head (Cat. No. 51610) 44" (111.8 cm) 1-1/4" Bender Head (Cat. No. 56211) 54" (137.2 cm)
BX and Armored Cable Cutter • Cuts armored cable up to 3/8" diameter: BX, AC, MC, MCAP and Greenfield • Depth of cut adjusts between standard MC and reduced diameter MC to prevent cable nicks • Sharp cutting blade eliminates burrs • Comes with one blade stored in handle for convenience • Holds up to six replacement blades in handle (Cat. No. 53726SEN) IMPROVED BLADE PROFILE
&RQGXLW7RROV DQG0HDVXUHPHQW
®
53726-SEN
7RRO.LWV
REPLACEMENT BLADE
Cat. No. Cutting Capacity 53725 Armored cable up to 3/8" (9.5 mm) diameter: BX, AC, MC, MCAP® and Greenfield
Overall Length 7.25" (18.4 cm)
53725
MCAP® is a registered trademark of Southwire Company.
6DIHW\33( DQG&RPIRUW
Cutting Capacity Scores 1/2", 3/4", 1" (12.7, 19.1 and 25.4 mm) EMT Conduit
1/2" and 3/4" — 88907 1" — 88908
9RLFH'DWD9LGHR
56999
Overall Length 9" (22.9 cm)
7HVWDQG 0HDVXUHPHQW
Weight 11.2 oz (318 g)
7RRO6WRUDJH
Size 1/2", 3/4"
REPLACEMENT BLADES
Overall Length 6" (15.2 cm)
Conduit Locknut Wrench • Easily attach locknuts in tight or deep cut-in boxes • For 1/2" and 3/4" (1.3 cm and 1.9 cm) connectors • Direct-drive heads rotate each other when twisted • Heavy-duty steel construction enables needed torque to loosen or tighten connectors • Perfect for remodel work where box is filled with existing wires • US Patent pending Cat. No. 56999
88906
Jaw Width 0.938" (2.4 cm)
Jaw Thickness 0.5" (1.3 cm)
Point Diameter 0.19" x 0.36" (0.48 cm x 0.91 cm)
Handle Color Yellow
Handle Finish Plastic-Dipped
Overall Length 7.75" (19.7 cm)
www.kleintools.com > 800-553-4676
119
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Jaw Length 1.625" (4.1 cm)
D333-8
3RZHU7RROV DQG$FFHVVRULHV
Conduit Locknut and Reaming Pliers • Tightens 1/2" (13 mm) and 3/4" (19 mm) EMT or 1/2" (13 mm) rigid locknuts • Fits liquid tight fittings and caps • Reams and deburrs both inside and outside of conduit • Knurled jaws at nose tip pull wire or fish tape • Machined nose fits snugly into locknut wings Cat. No. D333-8
-REVLWH $FFHVVRULHV
Electrician's Conduit Scoring Tool • Durable zinc cast scoring tool eliminates spiraling • Used for scoring 1/2", 3/4" and 1" (1.3 cm, 1.9 cm, and 2.5 cm) EMT conduit • Klein-designed, patented scoring wheel scores and allows clean conduit snaps without leaving burrs inside • 1" (2.5 cm) scoring wheel conveniently located in base of the handle; no tools required to replace scoring wheels • Four roller tracks specifically designed for professional use • Compact, enclosed design for use on job sites • US Patent D638451 Cat. No. 88906
'ULYHUVDQG :UHQFKHV
NPT Tap Size 3/4" (1.9 cm) 1" (2.5 cm) 1-1/4" (3.2 cm)
6WULSSHUV&XWWHUV DQG&ULPSHUV
Bender Handles in multiple sizes and lengths and are • Available compatible with all Klein Tools conduit bender heads • High-strength steel eliminates flex and provides excellent feel, control and leverage features an enlarged diameter hollow end for inserting conduit to correct • Handle overbends (Cat. No. 51427) • Bright orange color is easy to spot on the jobsite
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
&RQGXLW7RROV Lineman’s Pliers – Fish Tape Pulling Includes core High-Leverage Side-Cutting features plus: Easily pulls 1/8" or 1/4" (3 or 6 mm) flat steel fish tape without damaging the tape Crimps non-insulated connectors, lugs, and terminals (Cat. No. J2000-9NECRTP)
D213-9NETP
• •
Cat. No. D213-9NETP J213-9NETP
Jaw Length 1.594" (4.05 cm) 1.594" (4.05 cm)
Jaw Width 1.25" (3.18 cm) 1.25" (3.18 cm)
Jaw Thickness 0.625" (1.59 cm) 0.625" (1.59 cm)
Knife Length 0.797" (2.02 cm) 0.781" (1.98 cm)
Handle Color Dark Blue Dark Blue/Black
Handle Finish Overall Length Plastic-Dipped 9.33" (23.70 cm) Journeyman™ Dual-Material 9.55" (24.26 cm)
HANDLE FINISH
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
Pliers with heavy-duty cutting knives designed to cut ACSR, screws, nails and most hardened wire
D2000-9NETP 1.594" (4.05 cm) J2000-9NETP 1.594" (4.05 cm) J2000-9NECRTP 1.594" (4.05 cm)
1.25" (3.18 cm) 1.25" (3.18 cm) 1.25" (3.18 cm)
0.625" (1.59 cm) 0.625" (1.59 cm) 0.625" (1.59 cm)
0.781" (1.98 cm) 0.781" (1.98 cm) 0.797" (2.02 cm)
Light Blue Light Blue/Black Blue/Black
Plastic-Dipped 9.33" (23.70 cm) Journeyman™ Dual-Material 9.55" (24.26 cm) Journeyman™ Dual-Material 9.55" (24.26 cm)
JOURNEYMAN™ Dual-Material
Plastic-Dipped
Conduit-Fitting and Reaming Screwdriver design keeps tip from slipping out of screws, especially when • Hooded-blade tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged use • Reams both the inside and outside of the conduit at the same time • 5/16" (0.8 cm) screwdriver tip with 2-1/2" (6 cm) long shank • Longer Cushion-Grip handle provides comfort and more torque for reaming • Replaceable reaming blade is held in place with a 1/6" (.15 cm) set screw
85191
19353
Cat. No. 85191
Conduit Size 1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm)
CONDUIT REAMER REPLACEMENT BLADE, 2-PACK
Overall Length 7.5" (19.1 cm)
Conduit Reamer • Locks onto screwdrivers to ream and smooth thin-wall conduit • Reams ID and OD at the same time • Two set-screws for round- and square-shank screwdrivers • Fits up to 3/8" (1 cm) keystone-tip screwdrivers • NOT for use on power tools Cat. No. 19352
Conduit Size 1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm)
Overall Length 6.75" (17.2 cm)
Power Conduit Reamer • Ream conduit and install fittings in a fraction of the time • Impact rated to fit into power drill chucks and quick release adapters • Replacement blades are available and the only approved blade for use in this tool • Replacement bits are available but any standard 1/4" (1 cm) hex bit will work Cat. No. 85091
Conduit Size 1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm)
19352 19353
Overall Length 5.75" (14.6 cm)
CONDUIT REAMER REPLACEMENT BLADE, 2-PACK
Precision engineered replaceable reaming blade
85091
4x
Stronger
NOTE: Read and follow safety instructions in power tool owner’s manual.
120
www.kleintools.com > 800-553-4676
1/4" hex quick connect
Bit Retention
19353
CONDUIT REAMER REPLACEMENT BLADE, 2-PACK
3OLHUV
.QRFNRXW3XQFK6HWV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Knockout Punch Set • Optimized design reduces wrench effort • Slugs are split inside for easy removal • Maximum capacity of 10 gauge mild steel. Also cuts aluminum, fiberglass and plastic • Punches holes cleanly and accurately • Set includes 1/2" or 3/4" (1.3 cm or 1.9 cm) punch and die with draw stud Overall Length 4" (10.2 cm) 2.625" (6.7 cm)
53728SEN
&RQGXLW7RROV DQG0HDVXUHPHQW
Conduit Sizes 3/4" (1.9 cm) 1/2" (1.3 cm)
'ULYHUVDQG :UHQFKHV
Cat. No. 53727SEN 53728SEN
53727SEN
NOTE: Lubricate threads before each use.
Weight
53732SEN
9.0 lb (4.1 kg)
Description
53819 53827 53837 53849 53857 53867
0.875" Knockout Punch for 1/2" Conduit 1.115" Knockout Punch for 3/4" Conduit" 1.362" Knockout Punch for 1" Conduit 1.701" Knockout Punch for 1-1/4" Conduit 1.951" Knockout Punch for 1-1/2" Conduit 2.416" Knockout Punch for 2" Conduit
7RRO6WRUDJH
Cat. No. Punch
Die
0.875" Knockout Die for 1/2" Conduit 1.115" Knockout Die for 3/4" Conduit 1.362" Knockout Die for 1" Conduit 1.701" Knockout Die for 1-1/4" Conduit 1.951" Knockout Die for 1-1/2" Conduit 2.416" Knockout Die for 2" Conduit
9RLFH'DWD9LGHR
53820 53828 53838 53850 53858 53868
Additional Items
Ratcheting Box End Wrench, 1" Knockout Draw Stud 3/8" x 2-5/8" Knockout Draw Stud 3/4" x 4"
7HVWDQG 0HDVXUHPHQW
53873 53871 53872
-REVLWH $FFHVVRULHV
Set Contains
6DIHW\33( DQG&RPIRUW
Cat. No. 53732SEN
7RRO.LWV
Knockout Punch Set with Wrench Set includes: 1" ratcheting wrench, knockout punches, dies and • draw studs for 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" conduit sizes capacity 10 gauge mild steel; also cuts aluminum, • Cutting fiberglass and plastic • Splits slugs for easy removal • Punches holes cleanly and accurately Kit includes six different size knockout punches and dies, two • draw studs and one ratcheting box end wrench
NOTE: Lubricate threads before each use.
3RZHU7RROV DQG$FFHVVRULHV
121
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
PVC Cutter • Cuts up to 3/4" (1.9 cm) schedule 40 PVC • Makes clean burr-free cuts in PVC and flexible pipe • Reversible blade doubles life 1-3/8" (3.5 cm) outer • Cuts diameter flexible plastic pipe • Steel construction for strength • Guide helps cut pipe squarely • Handle latch keeps tool closed Cat. No. 50506SEN
PVC Cutting Capacity Up to 3/4" (1.9 cm) Schedule 40
50506SEN
Non-metallic Tubing Cutting Capacity 1" (2.5 ( cm)) Non-Metallic Tubingg Cutting, 1-3/8" (3.5 cm) Flexible Pipe Cutting
Overall Length 8.5" (21.6 cm)
REPLACEMENT BLADES 50549
Ratcheting PVC Cutters straight cuts 1/2"-2" I.D. (1.3 cm-5.1 cm) O.D. 5/8" - 2-1/2" • Provide (1.6 cm-6.4 cm) of white and gray schedule 40 and 80 PVC • Quick, one-handed blade release • Ratchet action allows easy, one-hand cutting • No tools required for instant blade change • Replacement blade and pin available
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
39&&XWWHUV
50031
REPLACEMENT BLADE FOR 50034
REPLACEMENT BLADE FOR 50031
50035
Cat. No. 50031 50034
REPLACEMENT RETAINING PIN 50033
PVC Cutting Capacity O.D. 5/8" to 1-5/8" (1.6 to 4.1 cm); I.D. 1/2" to 1-1/4" (1.3 to 3.2 cm) O.D. 5/8" to 2-1/2" (1.6 to 6.4 cm); I.D. 1/2" to 2" (1.3 to 5.1 cm)
Overall Length 9" (22.9 cm) 11" (27.9 cm)
WARNING: Do NOT cut cold PVC.
WARNING: Do NOT use to cut metallic pipes, cable or wire.
PVC Tube Cutter • Handle latch keeps tool closed • Rubberized grip with anti-impact design • Replacement blade available (Cat. No. 88914) 88912
Cat. No. 88912
122
Cutting Capacity 1" (2.5 cm) O.D. Multilayer Plastic Tubing and Up To 3/4" (1.9 cm) Schedule 40 PVC
www.kleintools.com > 800-553-4676
Overall Length 7.344" (18.7 cm)
3OLHUV
&XWWHUV%HQGHUVDQG3XQFK7RROV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Professional Mini Tube Cutter • Requires only 1-3/8" (3.5 cm) swing radius • Perfect for tight space cutting • Small convenient size; strong and durable tool Not designed for cutting stainless steel or hard • tempered tubing • Replacement blade available (Cat. No. 88905)
'ULYHUVDQG :UHQFKHV
Professional Tube Cutter • Accurate 4 roller tracking system — no spiraling • Professional reaming tool for stainless steel tubing • Extra cutting wheel included in handle • Replacement blade available (Cat. No. 88905)
Cutting Capacity 1/8" to 1-3/8" (0.3 to 3.5 cm) Steel and Copper Tubing
Overall Length 6.031" (15.3 cm)
88910
Cat. No. 88910
Cutting Capacity 1/8" to 5/8" (0.3 to 1.6 cm)
Overall Length 1.469" (3.7 cm)
&RQGXLW7RROV DQG0HDVXUHPHQW
88904
Cat. No. 88904
7RRO.LWV 6DIHW\33( DQG&RPIRUW
Professional 4-in-1 Tube Bender • Bends four popular tube sizes Calibrated markings for accurate left-hand, • right-hand, and offset bends up to 90° • For soft copper, aluminum, and steel tubing 3/16", 1/4", 5/16" and 3/8" (0.5 cm, • Bends 0.6 cm, 0.8 cm, 1 cm) O.D. tubing 89030
Overall Length 10" (25.4 cm)
-REVLWH $FFHVVRULHV
Cat. No. 89030
Swages
66400
3/16", 1/4", 5/16", 3/8", 1/2", 5/8" (4.8 mm, 6.4 mm, 7.9 mm, 9.5 mm, 12.7 mm, 15.9 mm) O.D. Tubing
9RLFH'DWD9LGHR
Cat. No.
66400
7RRO6WRUDJH
Professional 6-in-1 Swaging Punch • Swages six sizes of tubing • Hex design for ease of extraction • Precision machined surface for ease of forming • High-alloy steel, heat-treated for strength and durability • Made in USA Overall Length with Gauge Stick 5.813" (14.8 cm)
7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
123
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW 9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 3OLHUV
LEVELS
7RRO.LWV
3OLHUV
Laser Levels X-Plane Laser
Projects horizontal and vertical lines independently or together for various alignments
Z-Plane Laser
laser lines
'ULYHUVDQG :UHQFKHV
horizontal & vertical
6WULSSHUV&XWWHUV DQG&ULPSHUV
Self-leveling, easy-to-read
Mounting Bracket mount to ferromagnetic surfaces
Y-Plane Laser
&RQGXLW7RROV DQG0HDVXUHPHQW
Integrated magnetic 360˚ mounting bracket with 1/4" and 5/8" (0.6 cm and 1.6 cm) tripod mounting threads IP54: water and dust resistant
Plumb spot lasers to pinpoint overhead locations
1/4-20 tripod mounting threads
7RRO.LWV 6DIHW\33( DQG&RPIRUW
Self-Leveling Cross-Line Laser Level with Red Plumb Spot • High-performance laser leveling and alignment tool for professionals that provides a reliable self-leveling pendulum and vertical laser lines and red plumb spot lasers that project horizontal and vertical lines independently • Horizontal or together to address various alignment tasks • Integrated magnetic 360° mounting bracket with 1/4" and 5/8" (0.6 cm and 1.6 cm) tripod mounting threads • Low battery indicator and easily accessible battery compartment • Water and dust resistant (IP54) • Hard plastic carrying case included
93LCLG
-REVLWH $FFHVVRULHV
93LCLG
93LCLS
7RRO6WRUDJH 9RLFH'DWD9LGHR
Cat. No.
93LCLS
Cross-Line: Green; Plumb: Red Cross-Line: Red; Plumb: Red
Accuracy ±3/32" per p 33' (±2 ( mm per p 10 m)) Vertical & Horizontal Beams, ±1/8" per p 33' (±3 ( mm per p 10 m)) Plumb Up Spot, ±5/32" per 33' (±4 mm per 10 m) Plumb Down Spot ±3/32" per p 33' (±2 ( mm per p 10 m)) Vertical & Horizontal Beams, ±1/8" per p 33' (±3 ( mm per p 10 m)) Plumb Up Spot, ±5/32” per 33' (±4 mm per 10 m) Plumb Down Spot
Overall Height
Overall Width
Overall Length
5" (12.7 cm)
2.6" (6.6 cm)
5.3" (13.5 cm)
5" (12.7 cm)
2.6" (6.6 cm)
5.3" (13.5 cm)
7HVWDQG 0HDVXUHPHQW
93LCLG
Laser Color
3RZHU7RROV DQG$FFHVVRULHV
125
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
Rechargeable Self-Leveling Green Planar Laser Level Self-Leveling Green Planar Laser Level has easy-to-read high visibility green • Rechargeable horizontal and vertical laser lines • Projects independently or together in X-, Y- and Z-planes for various layout and alignment options • View the upward and downward plumb marks at the intersection of the Y-plane and Z-plane • More than 9 hour run time with integrated rechargeable Li-Ion battery • Integrated magnetic mounting bracket with 1/4-20 tripod mounting threads • Rugged body provides IP54 water and dust resistance Li-Ion battery pack, USB-A to USB-C charging cable, magnetic • Includes mounting bracket, protective hard carrying case, and instructions
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
/DVHU/HYHOV
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
93PLL
Cat. No. 93PLL
7RRO6WRUDJH
Accuracy ±11/64" per 33' (±4.5 mm per 10 m)
Overall Height 3.5" (1.4 cm)
Overall Width 4.8" (1.9 cm)
Overall Length 5.5" (2.2 cm)
Overall Width 1.9" (0.8 cm)
Overall Length 1.9" (0.8 cm)
Li-Ion Battery Battery is a replacement part for Klein Tools' Rechargeable Self-Leveling • Li-Ion Green Planar Laser Level (Cat. No. 93PLL) • Recharge the battery with the USB-A to USB-C charging cable the Li-Ion Battery by removing the screw at the bottom • Replace of the Rechargeable Self-Leveling Green Planar Laser Level Cat. No. 29026
Description Li-Ion Battery
Overall Height 3" (1.2 cm)
• Tripod is compact and made of lightweight aluminum construction • Adjustable legs and non-skid feet allow for stability on uneven terrain • Pan and tilt handle allows for 360° rotation and tilts pedestal to the desired orientation with Klein Tools laser levels and products that attach to a 1/4-20 mounting • Compatible thread such as cameras and video equipment
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
Laser Color Cross-Line: Green
Cat. No. 69345
Description
Overall Height
Overall Width
Overall Length
Tripod
4.5" (1.8 cm)
4.5" (1.8 cm)
23" (9.1 cm)
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
69345
126
www.kleintools.com > 800-553-4676
3OLHUV
/DVHU/HYHODQG/HYHOV
6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
Laser Line Bubble Levels • Projects a horizontal laser line and spot parallel to the base of the level up to 75' (22.9 m) • Crisp laser line projects 1/2" (1.3 cm) above base • Removable leveling base with pin for centering and thumb screws for adjusting the base • Three easy to read vials identify horizontal and cross at 0° level and vertical at 90° • The strong magnetic base attaches to ferromagnetic surfaces • High-visibility orange cast aluminum body is easy to see on conduit and jobsites
LBL100
Number of Vials 3
Type of Vials 0° Horizontal and Cross, 90° Vertical
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. LBL100
Overall Length 7.3" (18.5 cm)
7RRO.LWV
Accu-Bend™ Aluminum Levels Tapered Nose easily slides into pockets and fits in tighter spaces
Brass Thumb Screw for hands-free leveling when bending conduit Top V-Groove fits contour of pipe
6DIHW\33( DQG&RPIRUW
Prevents dog legs in conduit bends
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
Patented
Rare-Earth Magnets
Type of Vials 0°, 90°, 45°, 30° 90°
935AB4V
Overall Length 6.25" (15.8 cm) 2.5" (6.4 cm)
WARNING: Brass bolt contains lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
935AB1V
127
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
Number of Vials 4 1
7HVWDQG 0HDVXUHPHQW
Accu-Bend™ Aluminum Levels nose easily slides into • Tapered pockets and fits in tighter spaces magnet track keeps powerful • Patented Rare-Earth magnets in place • Top V-Groove fits contour of conduit and pipe Thumb screw attaches level to conduit to measure • angle while bending • Cat. No. 935AB1V is non-magnetic Cat. No. 935AB4V 935AB1V
9RLFH'DWD9LGHR
ULTRA POWERFUL
MAGNET TRACK
Large, High Visibility Vials are easy to read
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV
/HYHOV Billet Aluminum Torpedo Levels nose easily slides into • Tapered pockets and fits in tighter space magnet track keeps powerful • Patented Rare-Earth magnets in place • Top V-Groove fits contour of conduit and pipe No. 935RBLT features large, easy to read bright • Cat. LED high-definition vials for any lighting condition, a
935RBLT
3-minute auto-shut-off to save batter life, and is water Super Bright High-Definition and impact resistant
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
LED Vials (Cat No. 935RBLT)
Cat. No. 935RBLT 935RB
Number of Vials 3 4
Type of Vials 0°, 90°, 45° 0°, 90°, 45°, 30°
Overall Length 9" (22.9 cm) 8" (20.3 cm)
935RB
Aluminum Torpedo Levels • Aluminum frame with orange body for added visibility and durability • Patented magnet track keeps powerful Rare-Earth magnets in place • Top V-Groove fits contour of conduit and pipe • Large high-visibility vials are easy to read • Cat. No. 931-9RETT has tether ring for working at height • US Patent 9,964,407 Cat. No. 935R 931-9RETT
Number of Vials 3 3
Type of Vials 0°, 90°, 45° 0°, 90°, 45°
935R
9319RETT
Overall Length 9" (22.9 cm) 9" (22.9 cm)
SPLIT TETHER RING
Torpedo Level • Strip magnet bottom holds securely to conduit and metal surfaces • High-visibility orange level won't get lost on conduit • Large high-visibility vials are easy to read • Top V-Groove fits contour of pipe Cat. No. 935
Number of Vials 3
Type of Vials 0°, 90°, 45°
24" Bubble Level • Adjustable vial allows angle transfer between multiple surfaces • Patented magnet track keeps powerful Rare-Earth magnets in place • Top V-Groove fits contour of conduit and pipe • High visibility vials with reinforced housing • Durable rubberized end caps for increased drop protection • Vial accuracy is ±0.029° • US Patent 9,964,407 128
www.kleintools.com > 800-553-4676
935
Overall Length 9" (22.9 cm)
935L
Cat. No. 935L
Number of Vials 3
Type of Vials 0°, 90°, Adjustable
Overall Length 24" (61 cm)
3OLHUV
'LJLWDO/HYHOV
6WULSSHUV&XWWHUV DQG&ULPSHUV
Accuracy ±0.1° from 0° to 1°, 89° to 91°, 179° to 180°; ±0.2° at All Other Angles
935DAG
Overall Width 1.2" (3 cm)
Overall Length 2.36" (6 cm)
Overall Height 2.48" (6.3 cm)
Overall Width 1.36" (3.5 cm)
Overall Length 4.57" (11.6 cm)
Overall Width 1.3" (3.3 cm) 0.8" (1.9 cm)
Overall Length 15.1" (38.4 cm) 15.1" (38.4 cm)
7RRO.LWV
Overall Height 2.2" (5.6 cm)
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
Accuracy Vertical and Horizontal Orientation: ±0.2°; Bullseye Orientation: ±0.5°
6DIHW\33( DQG&RPIRUW
Digital Level with Programmable Angles • Digital level measures 0 to 90°, 0 to 180°, or dual axis bullseye ranges commonly used target pitches for efficiency and ease-of • Pre-programmed use: 1/8", 1/4", 3/8" and 1/2" (0.3 cm, 0.6 cm, 0.9 cm, 1.3 cm) per foot achieve target angle by setting an audible alarm; LCD will change color as a visual • Easily indicator of reaching the set target angle • Use in bullseye orientation to accurately determine X- and Y-axis • Display auto-rotates when used in horizontal or vertical orientation • High visibility reverse contrast display improves visibility in dimly lit work environments • Strong magnetic base attaches to ferromagnetic surfaces • V-Groove edges enable optimal alignment on conduit and pipes for bending and alignment • Language selectable menu for English, Spanish, and French • Soft carrying case and 2 x AA batteries included Plumber's Kit (Cat. No. 69346) allows the level to be used with PVC and other • Optional non-magnetic pipes and conduit, up to 6" of outer diameter Cat. No. 935DAGL
9RLFH'DWD9LGHR
Plumber’s Kit Accessories for 935DAGL and 935DAG Kit straps to brass, copper, PVC, and other • Plumber's non-magnetic pipes and conduit to present a magnetic surface to which Digital Angle Gauges and Levels may be mounted Two flexible, adjustable length straps connect the metal plate to pipes, conduit, or other objects Fits common PVC pipe sizes from 1" to 6" (2.5 cm to 15.2 cm) outer diameter and can stretch to fit circumferences up to 18" (45.7 cm)
7HVWDQG 0HDVXUHPHQW
• •
3RZHU7RROV DQG$FFHVVRULHV
47
Cat. No. 69346 69347
Description Plumber’s Kit for 935DAGL and 935DAG Plumber's Kit Replacement Straps
&RQGXLW7RROV DQG0HDVXUHPHQW
Cat. No. 935DAG
'ULYHUVDQG :UHQFKHV
Digital Angle Gauge and Level This Digital Angle Gauge and Level can measure or set angles, • check relative angles, or can be used as a digital level High visibility reverse contrast display improves visibility in dimly lit work environments • Strong magnetic attaches to conduit, pipes, saw blades, • vents, ducts, and base other ferromagnetic surfaces • V-Groove edges enable optimal alignment on conduit and pipes for bending and alignment • 0 to 90° and 0 to 180° measurement ranges facilitate multiple and diverse applications range is useful when accounting for kickback in • 0pipeto 180° bending applications when bending to 90° or more • Display auto-rotates when upside-down for easy viewing • Water and dust resistant with rating of IP42 • Soft carrying case and 2 x AAA batteries included Plumber’s Kit (Cat. No. 69346) allows the level to be used with PVC and other • Optional non-magnetic pipes and conduit, up to 6 inches of outer diameter
Overall Height 0.4" (1.0 cm) 0.2" (0.6 cm)
129
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV 3OLHUV
TAPE MEASURES
3RZHU7RROV DQG$FFHVVRULHV
3OLHUV
Tape Measures
6WULSSHUV&XWWHUV DQG&ULPSHUV
Magnetic end hooks with dual angle attraction attaches to conduit and steel studs to easily read from above or below
13 FOOT
'ULYHUVDQG :UHQFKHV
STANDOUT WIDE, TOUGH, & DURABLE BLADE
Retraction Speed Brake controls blade speed and protects fingers from having to touch blade
&RQGXLW7RROV DQG0HDVXUHPHQW
UNCLUTTERD, EASY-TO-READ
US Patent D803711
7RRO.LWV
Conduit bending table and 3-phase layout guide helps calculate offsets and saddles
Tape Measures
• • • •
Tape Length 25' (7.6 m) 16' (4.9 m) 25' (7.6 m) 30' (9.1 m)
Hook Single Double Double Double
Magnetic No Yes Yes Yes
Overall Width 2.35" (6 cm) 2.35" (6 cm) 2.35" (6 cm) 2.35" (6 cm)
Overall Length 3.43" (8.7 cm) 3.07" (8 cm) 3.43" (8.7 cm) 3.8" (9.7 cm)
Double
Yes
2.35" (6 cm)
3.43" (8.7 cm)
WARNING:
7.5 m (25')
7RRO6WRUDJH
• Protect hands when cleaning magnetic tip end. Use gloves or cloth. • Avoid magnetic contact with sensitive electronic or computer equipment. • To avoid personal injury and damage to this tool, do not allow the tape blade to retract into case. • Do NOT open case. Spring motor is under tension, and opening case may cause injury.
Metric and Imperial
9375
Single Hook End
-REVLWH $FFHVVRULHV
Cat. No. 9125 9216 9225 9230
Double Hook End
6DIHW\33( DQG&RPIRUW
Includes core Tape Measure features plus: Heavy-Duty nylon coating protects blade printing Super-sized back clip holds securely to wide belts and extends into pockets Printing with centimeters and inches (Cat. No. 9375) Cat. No. 9125 has one-sided printing
Tape Measure Holders • Klein offers a complete selection of leather or nylon tape measure holders and pouches
9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW
5195
Description Leather Tape Measure Holder, Medium Tape Measure Holder with Tether Ring Leather Tape Measure Holder, Large Nylon Tape Measure Clip/Holder Nylon Tape Measure Pouch
For Use With, Tape Measure 9216 9216 9125, 9225, 9375, 9230 9216, 9125, 9225, 9375, 9230 9216, 9125, 9225, 9375, 9230
5196
5712
5707
For Use With Cat. Nos. 93025, 93125, 93225, 93275, 928-25HV Cat. Nos. 86125, 86225, 86375 Cat. No. 93430 Cat. Nos. 93025, 93125, 93225, 93275, 93116, 93430 Cat. No. 93430
Overall Height 7" (17.8 cm) 3.5" (8.9 cm) 7" (17.8 cm) 3.75" (9.5 cm) 4.5" (11.4 cm)
Overall Length 4.5" (11.4 cm) 3" (7.6 cm) 5" (12.7 cm) 4.125" (10.5 cm) 8.25" (21 cm)
131
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3RZHU7RROV DQG$FFHVVRULHV
Cat. No. 5195 5195TT 5196 5707 5712
5195TT
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV 'ULYHUVDQG :UHQFKHV &RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV 7RRO6WRUDJH
Woven Fiberglass Tapes Woven fiberglass tape with moisture-proof coating of polyvinyl • chloride assures durability and protects against oil or chemicals Can be immersed in water without adverse effects • All metal parts are nickel-plated for protection against rust • Tape line is graduated in feet and inches to 8ths • Cat. No. 946-50 946-100 946-150
Tape Length 50' (15.2 m) 100' (30 m) 150' (45.7 m)
Hook Single Single Single
Overall Width 1" (2.5 cm) 1" (2.5 cm) 2" (5.1 cm)
946-50
946-150
901-6
steel spring hinges for added strength and engraved graduations on both sides. Cat. No. 900-6 901-6 905-6 910-6 911-6
Material Hardwood Hardwood Hardwood Nylon, Fiberglass Reinforced Nylon, Fiberglass Reinforced
Reading Inside Outside Outside Inside Outside
Overall Length 6' (1.8 m) 6' (1.8 m) 6' (1.8 m) 6' (1.8 m) 6' (1.8 m)
910-6
Laser Distance Measurer • Meter provides measurements up to 98' (30 m) in distance, at an accuracy of ±1/16" (±0.2 cm) • Quickly calculates length, area, volume, and Pythagoras measurements with large, easy-to-read buttons • Offers the option of one-touch, single-distance measurement and continuous measurement • Depth gauge stick flips out to measure from inside corners or channels • Highly visible backlit display • Provides both fractional (imperial) and metric readings • Memory stores last 20 measurements • Includes batteries and carrying pouch to keep safe when not in use Cat. No. 93LDM65
Batteries 2 x AAA
Overall Height 4.5" (11.4 cm)
Overall Width 2" (5.1 cm)
3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Overall Length 7.75" (19.7 cm) 9" (22.9 cm) 13" (33 cm)
Folding Rules • Black markings on yellow, with red stud center markings every 16" (40.6 cm) • Measurements are marked on both sides and both edges, graduated to 1/16" (0.2 cm) • Riveted lock joints are designed for long wear and maintained accuracy • Extension slide moves under friction in a T-slot with stops at each end (Cat. No. 905-6) • Strong, 6' (183 cm) long hardwood rules with clear abrasion-resistant coating (Cat. Nos. 900-6, 901-6, 905-6) Nos. 910-6 and 911-6 are constructed of non-conductive tough nylon, reinforced with glass fibers for added • Cat. durability, and resistance to weather, abrasion and most chemicals. Includes positive locking joints and stainless
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
0HDVXUHPHQW
132
www.kleintools.com > 800-553-4676
Overall Length 1.375" (3.5 cm)
93LDM65
3OLHUV
6WULSSHUV&XWWHUV DQG&ULPSHUV
'ULYHUVDQG :UHQFKHV
&RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV
6DIHW\33( DQG&RPIRUW
-REVLWH $FFHVVRULHV 7RRO6WRUDJH
9RLFH'DWD9LGHR
7ULP2XW
7HVWDQG 0HDVXUHPHQW
Some projects are more complex than others and require a variety of tools to be used. For this reason, Klein has tool kits to assist professionals with these demanding projects.
$SSUHQWLFH
TOOL KITS
0XOWL3LHFH
3RZHU7RROV DQG$FFHVVRULHV
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3OLHUV 6WULSSHUV&XWWHUV DQG&ULPSHUV
7RRO.LWV 41-Piece Tool Kit
Cat. No. Kit Contains 80141
New list of products, same catalog number
Cat. No.
'ULYHUVDQG :UHQFKHV
D2000-48
&RQGXLW7RROV DQG0HDVXUHPHQW
D203-8N D2000-9NETP D502-10 63225 11055 K1412 1005 601-3 601-6
7RRO.LWV
605-6 600-4 602-6 603-3
6DIHW\33( DQG&RPIRUW
603-4B 662 32561
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
32314 80141
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local laws on legality of selling or possessing these knives. WARNING: Do NOT open the tape measure case. Spring motor is under tension, and opening may cause injury.
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
3RZHU7RROV DQG$FFHVVRULHV
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
WARNING: Never remove screws while fish tape is coiled inside reel.
85091 630-3/16 630-1/4 630-5/16 630-11/32 630-3/8 630-7/16 630-1/2 70550 650 NCVT-3P RT210 ET250 56331 44131 31737 9225 56049 935AB4V 55421BP-14 5139 60159 MAG2
Weight 22.24 lb (10.1 kg) Description
8" High-Leverage g g Heavy-Duty y y Diagonal-Cutting Pliers, Angled Head 8" Long-Nose Pliers, Side-Cutting 9" High-Leverage Heavy-Duty Lineman's Pliers, Tape Puller 10" Pump Pliers High-Leverage Cable Cutter Wire Stripper/Cutter Dual NM Cable Stripper/Cutter Crimping/Cutting Tool 3/16" Cabinet Cushion-Grip Screwdriver, 3" Round Shank 3/16" Cabinet Cushion-Grip Screwdriver, 6" Round Shank 1/4" Cabinet Cushion-Gripp Screwdriver, Heavy-Duty, 6" Round Shank 1/4" Keystone y Cushion-Gripp Screwdriver, Heavy-Duty, 4" Square Shank 5/16" Keystone y Cushion-Gripp Screwdriver, Heavy-Duty, 6" Round Shank #1 Phillips p Cushion-Grip Screwdriver, 3" Round Shank #2 Phillips p Wire Bendingg Cushion-Grip Screwdriver, 4" Round Shank #2 Square-Recess q Cushion-Grip Screwdriver, 4" Round Shank 6-in-1 Stubbyy Multi-Bit Cushion-Gripp Screwdriver/Nut Driver, 1.25" Round Shank 14-in-1 Precision Cushion-Gripp Screwdriver/Nut Driver, 3" Round Shank Power Conduit Reamer, #2 Square Bit 3/16" Cushion-Grip Nut Driver, 3" Hollow Shaft 1/4" Cushion-Grip Nut Driver, 3" Hollow Shaft 5/16" Cushion-Grip Nut Driver, 3" Hollow Shaft 11/32" Cushion-Grip Nut Driver, 3" Hollow Shaft 3/8" Cushion-Grip Nut Driver, 3" Hollow Shaft 7/16" Cushion-Grip Nut Driver, 3" Hollow Shaft 1/2" Cushion-Grip Nut Driver, 3" Hollow Shaft Pro Folding Hex Key Set Cushion-Grip Scratch Awl Dual-Range Non-Contact Voltage Tester, Flashlight GFCI Receptacle Tester Digital AC/DC Voltage and Continuity Tester 50' Steel Fish Tape Folding Utility Knife Folding Jab Saw 25' Tape Measure, Magnetic Double Hook Rechargeable Light Array Headlamp ACCU-BEND™ 4 Vial Level 39-Pocket Tradesman Pro™ Tool Bag Backpack Canvas Zipper Bag Standard Safety Glasses, Clear Magnetizer/Demagnetizer
Products replaced previous items in this kit
134
www.kleintools.com > 800-553-4676
3OLHUV
7RRO.LWV Cat. No. Kit Contains 80028
New list of products, same catalog number
Weight 17.25 lb (7.8 kg)
602-6 603-4 662 85191
80028
WARNING: Do NOT open the tape measure case. Spring motor is under tension, and opening may cause injury.
7RRO6WRUDJH
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local laws on legality of selling or possessing these knives.
-REVLWH $FFHVVRULHV
Canvas Zipper Bag Standard Safety Glasses, Clear
605-4
6DIHW\33( DQG&RPIRUW
5139 60159
D203-8 D213-9NETP D502-10 11045 1005 601-6
7RRO.LWV
630-3/16 630-1/4 630-5/16 630-11/32 630-3/8 630-7/16 630-1/2 70550 NCVT-3P RT210 44131 9125 935R 55421BP-14
8" High-Leverage g Diagonal-Cutting Pliers, Angled Head 8" Long-Nose Pliers, Side-Cutting 9" High-Leverage Lineman's Pliers, Tape Puller 10" Pump Pliers Wire Stripper/Cutter Crimping/Cutting Tool, For Connectors 3/16" Cabinet Cushion-Grip Screwdriver, 6" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank 5/16" Keystone y Cushion-Grip Screwdriver, 6" Round Shank #2 Phillips p Cushion-Grip Screwdriver, 4" Round Shank #2 Square-Recess q Cushion-Grip Screwdriver, 4" Round Shank Conduit-Fittingg and Reamingg Cushion-Grip Screwdriver, 2.5" Round Shank 3/16" Cushion-Grip Nut Driver, 3" Hollow Shaft 1/4" Cushion-Grip Nut Driver, 3" Hollow Shaft 5/16" Cushion-Grip Nut Driver, 3" Hollow Shaft 11/32" Cushion-Grip Nut Driver, 3" Hollow Shaft 3/8" Cushion-Grip Nut Driver, 3" Hollow Shaft 7/16" Cushion-Grip Nut Driver, 3" Hollow Shaft 1/2" Cushion-Grip Nut Driver, 3" Hollow Shaft Pro Folding Hex Key Set Dual-Range Non-Contact Voltage Tester, Flashlight GFCI Receptacle Tester Folding Utility Knife 25' Tape Measure, Single Hook 9" Aluminum Torpedo Level 39-Pocket Tradesman Pro™ Tool Bag Backpack
&RQGXLW7RROV DQG0HDVXUHPHQW
Description
D248-8
'ULYHUVDQG :UHQFKHV
Cat. No.
6WULSSHUV&XWWHUV DQG&ULPSHUV
28-Piece Tool Kit
Products replaced previous items in this kit
9RLFH'DWD9LGHR 7HVWDQG 0HDVXUHPHQW 3RZHU7RROV DQG$FFHVVRULHV
135
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV
Cat. No. Kit Contains 80118
18-Piece Tool Kit
Cat. No.
&RQGXLW7RROV DQG0HDVXUHPHQW 7RRO.LWV 6DIHW\33( DQG&RPIRUW -REVLWH $FFHVVRULHV
Weight 11.6 lb (5.3 kg) Description
J2000-9NETP 9" Journeyman™ y High-Leverage g Heavy-Duty Lineman's Pliers, Tape Puller J2000-48 8" Journeyman™ y High-Leverage g g Heavy-Duty Diagonal-Cutting Pliers, Angled Head J203-8N 8" Journeyman™ Long-Nose Pliers, Side-Cutting J502-10 10" Journeyman™ Pump Pliers 11055 Wire Stripper/Cutter 5165 10-Pocket Tool Pouch Knife Snap D507-10 10" Adjustable Wrench Extra Capacity 603-3 #1 Phillips Cushion-Grip Screwdriver, 3" Round Shank 603-4B #2 Phillips p Wire Bending Cushion-Grip Screwdriver, 4" Round Shank 605-4 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank 605-6 1/4" Cabinet Cushion-Grip Screwdriver, 6" Round Shank 630-1/4 1/4" Cushion-Grip Nut Driver, 3" Hollow Shaft 630-5/16 5/16" Cushion-Grip Nut Driver, 3" Hollow Shaft 662 #2 Square Cushion-Grip Screwdriver, 4" Round Shank 670-6 3/16" Cabinet Rapi-Driv® Cushion-Grip Screwdriver, 6" Round Shank 9225 25' Tape Measure, Magnetic Double Hook 5705 PowerLine™ Web Work Belt 60161 Professional Safety Glasses, Clear Lens
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
7RRO.LWV
80118
WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. Check local laws on legality of selling or possessing these knives.
WARNING: Do NOT open the tape measure case. Spring motor is under tension, and opening may cause injury.
14-Piece Tool Kit 7RRO6WRUDJH
Cat. No. Kit Contains 80014 Description
D213-9NETP D248-8
9" High-Leverage Lineman's Pliers, Tape Puller 8" High-Leverage g Diagonal-Cutting Pliers, Angled Head 8" Long-Nose Pliers, Side-Cutting 10" Pump Pliers Wire Stripper/Cutter #1 Phillips p Cushion-Grip Screwdriver, 3" Round Shank #2 Phillips p Wire Bending Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 6" Round Shank 3/16" Cabinet Rapi-Driv® Cushion-Grip Screwdriver, 6" Round Shank 25' Tape Measure, Single Hook Protective Frameless Eyewear Clear Lens Adjustable PolyWeb Tool Belt 8-Pocket Tool Pouch Slotted
9RLFH'DWD9LGHR
603-4B 605-4
7HVWDQG 0HDVXUHPHQW
Weight 9.6 lb (4.4 kg)
Cat. No.
D203-8 D502-10 11045 603-3
605-6 670-6 9125 60056 5225 5164
3RZHU7RROV DQG$FFHVVRULHV
WARNING: This is NOT an occupational protective belt.
WARNING: Do NOT open the tape measure case. Spring motor is under tension, and opening may cause injury. 80014
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
WARNING: This is NOT an occupational protective belt.
136
www.kleintools.com > 800-553-4676
3OLHUV
7RRO.LWV
Description
J213-9NETP J2038 J2000-48
9" Journeyman™ High-Leverage Lineman's Pliers, Tape Puller 8" Journeyman™ Long-Nose Pliers, Side-Cutting 8" Journeyman™ y High-Leverage g g Heavy-Duty Diagonal-Cutting Pliers, Angled Head 10" Journeyman™ Pump Pliers Wire Stripper/Cutter #1 Phillips Cushion-Grip Screwdriver, 3" Round Shank #2 Phillips Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank 3/16" Cabinet Cushion-Grip Screwdriver, 6" Round Shank #2 Square-Recess Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cushion-Grip Nut Driver, 3" Hollow Shaft 5/16" Cushion-Grip Nut Driver, 3" Hollow Shaft PowerLine™ Cordura® Tool Pouch PowerLine™ Web Work Belt
J502-10 11055 603-3 603-4 605-4 601-6 662 630-1/4 630-5/16 5720 5705
&RQGXLW7RROV DQG0HDVXUHPHQW
WARNING: This is NOT an occupational protective belt.
Cat. No.
'ULYHUVDQG :UHQFKHV
92914
Weight 6.9 lb (3.1 kg)
6WULSSHUV&XWWHUV DQG&ULPSHUV
Cat. No. Kit Contains 92914
14-Piece Apprentice Tool Kit
Cordura® is a registered trademark of INVISTA for durable fabrics
Cat. No. Kit Contains 5300
Weight 6.8 lb (3.1 kg) 9" High-Leverage Lineman's Pliers, Tape Puller
D248-8 D203-8 D502-10 11045 603-3 603-4 605-4 605-6 9125 5225 5166
8" High-Leverage Diagonal-Cutting Pliers, Angled Head 8" Long-Nose Pliers, Side-Cutting 10" Pump Pliers Wire Stripper/Cutter #1 Phillips Cushion-Grip Screwdriver, 3" Round Shank #2 Phillips Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, Heavy-Duty, 6" Round Shank 25' Tape Measure, Single Hook Adjustable PolyWeb Tool Belt 7-Pocket Leather Tool Pouch
12-Piece Tool Kit
WARNING: Do NOT open the tape measure case. Spring motor is under tension, and opening may cause injury.
New list of products, same catalog number
Weight 6.83 lb (3.1 kg) 8" High-Leverage Diagonal-Cutting Pliers, Angled Head 8" Long-Nose Pliers, Side-Cutting 9" High-Leverage Lineman's Pliers Wire Stripper/Cutter 3/16" Cabinet Cushion-Grip Screwdriver, 6" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank #2 Phillips Cushion-Grip Screwdriver, 4" Round Shank #2 Square-Recess Cushion-Grip Screwdriver, 4" Round Shank 7.5m Tape Measure, Magnetic Double Hook, Metric and Imperial 9" Aluminum Torpedo Level PowerLine™ Cordura® 18-Pocket Electrician’s Tool Pouch PowerLine™ Web Work Belt
Products replaced previous items in this kit
92003
WARNING: This is NOT an occupational protective belt.
3RZHU7RROV DQG$FFHVVRULHV
Description
D248-8 D203-8 D213-9NE 11045 601-6 605-4 603-4 662 9375 935R 5719 5705
7HVWDQG 0HDVXUHPHQW
Cat. No.
9RLFH'DWD9LGHR
Cat. No. Kit Contains 92003
7RRO6WRUDJH
WARNING: This is NOT an occupational protective belt.
-REVLWH $FFHVVRULHV
Description
D213-9NETP
6DIHW\33( DQG&RPIRUW
Cat. No.
7RRO.LWV
12-Piece Tool Kit
Cordura® is a registered trademark of INVISTA for durable fabrics
WARNING: Do NOT open the tape measure case. Spring motor is under tension, and opening may cause injury.
137
/LIWLQJ3XOOLQJ DQG6WUXFWXUDO
www.kleintools.com > 800-553-4676
3OLHUV
11-Piece Apprentice Tool Kit
Cat. No. Kit Contains 92911
&RQGXLW7RROV DQG0HDVXUHPHQW
'ULYHUVDQG :UHQFKHV
6WULSSHUV&XWWHUV DQG&ULPSHUV
7RRO.LWV Weight 6.1 lb (2.8 kg)
Cat. No.
Description
D213-9NETP D248-8 D203-8 D502-10 11045 603-3 603-4 605-4 601-6 5720 5705
9" High-Leverage Lineman's Pliers, Tape Puller 8" High-Leverage Diagonal-Cutting Pliers, Angled Head 8" Long-Nose Pliers, Side-Cutting 10" Pump Pliers Wire Stripper/Cutter #1 Phillips Cushion-Grip Screwdriver, 3" Round Shank #2 Phillips Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank 3/16" Cabinet Cushion-Grip Screwdriver, 6" Round Shank PowerLine™ Cordura® Tool Pouch PowerLine™ Web Work Belt
Cordura® is a registered trademark of INVISTA for durable fabrics
WARNING: This is NOT an occupational protective belt.
6-Piece Apprentice Tool Kit
Cat. No. Kit Contains
Weight
92906
1.1 lb (0.5 kg)
6-Piece Trim-Out Tool Kit
3RZHU7RROV DQG$FFHVVRULHV /LIWLQJ3XOOLQJ DQG6WUXFWXUDO
Cat. No.
Description
D213-9NE D248-8 D203-8 11045 603-4 605-4
9" High-Leverage Lineman’s Pliers 8" High-Leverage Diagonal-Cutting Pliers, Angled Head 8" Long-Nose Pliers, Side-Cutting Wire Stripper/Cutter #2 Phillips Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank
92906
7HVWDQG 0HDVXUHPHQW
9RLFH'DWD9LGHR
7RRO6WRUDJH
-REVLWH $FFHVVRULHV
6DIHW\33( DQG&RPIRUW
7RRO.LWV
92911
Cat. No. Kit Contains
Weight
80006
2.8 lb (1.3 kg) Cat. No.
Description
D2000-9NE 11055 603-4 605-4 5204 5119
9" High-Leverage Heavy-Duty Cutting Lineman's Pliers Wire Stripper/Cutter #2 Phillips Cushion-Grip Screwdriver, 4" Round Shank 1/4" Cabinet Cushion-Grip Screwdriver, 4" Round Shank Lightweight Utility Belt, Blue 4-Pocket Tool Pouch 6-1/2" x 8-1/2"
WARNING: This is NOT an occupational protective belt.
80006
138
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories
Safety Helmets Eyewear Respiration Work Wear Gloves Safety Products
Lifting, Pulling, and Structural
Supports
Power Tools and Accessories
Hard Hat Accessories
Hard Hats
Test and Measurement
Our insulated tools combine excellent functionality and reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Klein Personal Protective Equipment and Safety products help guard against a variety of occupational hazards.
Personal Protection and Safety Equipment
Voice/Data/Video
1000V Insulated Tools
Tool Storage
INSULATED TOOLS, PPE, AND SAFETY
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
1000V INSULATED
Lifting, Pulling, and Structural
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
INSULATED All Klein insulated tools comply with ASTM F-1505 and IEC 60900 standards for insulated tools and are clearly marked with the official international 1000-volt rating symbol.
10,000 volts are run through the insulation to ensure that there are no leaks
FLAMMABILITY TESTING
Provides a multi-color, sleeker design than the Classic Lineman’s insulated tools. EINS tools have passed VDE third party testing certification to the IEC 60900 standard.
Feature large, bright orange handles making the tool comfortable to use all day and easy to identify in the field.
Feature insulated, bright orange shaft with Cushion-Grip handles for safety and comfort.
~
Durable, three component molded insulation provides protection against electric shock
Flame retardant, impact-resistant, bright orange outer coating
Product numbers with the INS and EINS suffix contain these warnings below and must be understood.
Flame retardant, impact-resistant, bright orange outer coating
WARNING: Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. WARNING: Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
WARNING: Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
Lifting, Pulling, and Structural
WARNING: Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
Power Tools and Accessories
Flame retardant, impact-resistant, multi-color outer coating
Thick, exceptionally tough, highdielectric white inner coating is bonded to the tool
Thick, exceptionally tough, highdielectric white inner coating is bonded to the tool
Test and Measurement
Thick, exceptionally tough, highdielectric white inner coating is bonded to the tool
Durable, two component molded insulation provides protection against electric shock
Durable, two component molded insulation provides protection against electric shock
Voice/Data/Video
Insulated Screwdrivers & Nut Drivers
Tool Storage
Classic Insulated (INS)
Jobsite Accessories
Electrician’s Insulated (EINS)
Safety, PPE and Comfort
Not all tools with plastic coatings or plastic handles provide protection against electrical shock. Only use those tools that are marked with the official international 1000-volt rating symbol, as shown, if there is any chance that the tool will make contact with an energized source.
Tool Kits
To conform to these standards, each insulated tool is put through Klein’s internal rigorous testing process to ensure the tool can handle any situation in the field. Some of these tests include the dielectric test, a handle pull off test, an impact test and a flammability test, to confirm the durability and reliability of our insulated tools.
Conduit Tools and Measurement
Pliers • Screwdrivers and Nut Drivers • Wire Strippers/Cutters Cable Cutters • Crimpers/Cutters • Knives
DIELECTRIC TESTING
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Insulated Insulated High-Leverage Side-Cutting Lineman's Pliers Includes core insulated features plus: High-leverage design provides 46% greater cutting and gripping power than other plier designs Streamlined design with sure-gripping, cross-hatched knurled jaws Crimping die behind hinge for superior leverage crimping non-insulated connectors, lugs and terminals (Cat. No. D213-9NE-CR-INS)
• • •
2139NEEINS
CRIMPING FEATURE
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
D213-9NE-CR-INS
Cat. No. 2138NEEINS 2139NEEINS D213-9NE-INS D213-9NE-CR-INS
Jaw Length 1.438" (3.7 cm) 1.594" (4 cm) 1.594" (4 cm) 1.594" (4 cm)
Jaw Width 1.22" (3.1 cm) 1.66" (4.2 cm) 1.25" (3.2 cm) 1.25" (3.2 cm)
Jaw Thickness 0.625" (1.6 cm) 0.625" (1.6 cm) 0.613" (1.6 cm) 0.625" (1.6 cm)
Knife Length 0.75" (1.9 cm) 0.781" (2 cm) 0.797" (2 cm) 0.781" (2 cm)
Handle Color Orange/Gray Orange/Gray Orange Orange
Handle Finish 3-Layer Insulation 3-Layer Insulation 2-Layer Insulation 2-Layer Insulation
Overall Length 8.82" (22.4 cm) 9.53" (24.2 cm) 9.68" (24.6 cm) 9.68" (24.6 cm)
3-Layer Insulation 2-Layer Insulation
9.53" (24.2 cm) 9.68" (24.6 cm)
Pliers with heavy-duty cutting knives design to cut ACSR, screws, nails and most hardened wire
20009NEEINS D2000-9NE-INS
1.594" (4 cm) 1.594" (4 cm)
1.25" (3.2 cm) 1.25" (3.2 cm)
0.613" (1.6 cm) 0.6" (1.5 cm)
0.797" (2 cm) 0.781" (2 cm)
Orange/Gray Orange
HANDLE FINISH
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
Insulated High-Leverage Diagonal-Cutting Pliers Includes core insulated features plus: High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting power than other pliers designs 13° angled head for easier work in confined spaces (Cat. Nos. 200048EINS, D248-8-INS, and D2000-48-INS)
• •
Cat. No. D228-8-INS D248-8-INS
Jaw Length 0.781" (2 cm) 0.813" (2.1 cm)
Jaw Width 1.25" (3.2 cm) 1.25" (3.2 cm)
Jaw Thickness 0.46" (1.2 cm) 0.46" (1.2 cm)
Cutting Knives Standard Standard
200028EINS
Handle Color Orange Orange
Handle Finish 2-Layer Insulation 2-Layer Insulation
Overall Length 8.24" (20.9 cm) 8.24" (20.9 cm)
3-Layer Insulation 2-Layer Insulation 3-Layer Insulation 2-Layer Insulation
8.15" (20.7 cm) 8.24" (20.9 cm) 8.15" (20.7 cm) 8.24" (20.9 cm)
HANDLE FINISH
Pliers with heavy-duty cutting knives design to cut ACSR, screws, nails and most hardened wire
200028EINS D2000-28-INS 200048EINS D2000-48-INS
0.83" (2.1 cm) 0.83" (2.1 cm) 0.813" (2.1 cm) 0.813" (2.1 cm)
1.25" (3.2 cm) 1.25" (3.2 cm) 1.25" (3.2 cm) 1.25" (3.2 cm)
0.49" (1.2 cm) 0.49" (1.2 cm) 0.48" (1.2 cm) 0.46" (1.2 cm)
Standard Standard Standard Standard
Orange/Gray Orange Orange/Gray Orange
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
Insulated Heavy-Duty Diagonal-Cutting Pliers – Tapered Nose Includes core insulated features plus:
• • One-inch deep jaws easily reach into confined spaces
D220-7-INS
HANDLE FINISH
Cat. No. D220-7-INS
142
Jaw Length 1" (2.5 cm)
Jaw Width 0.969" (2.5 cm)
Jaw Thickness 0.5" (1.3 cm)
www.kleintools.com > 800-553-4676
Cutting Knives Standard
Handle Color Orange
Handle Finish 2-Layer Insulation
Overall Length 7.67" (19.5 cm)
INS INSULATED 2-Layer Protection
Pliers
Insulated
Strippers, Cutters, and Crimpers
Insulated Long-Nose Pliers – Side-Cutting
• • • • •
INS INSULATED 2-Layer Protection
D203-8N-INS
Jaw Thickness 0.375" (1 cm) 0.375" (1 cm) 0.375" (1 cm) 0.375" (1 cm) 0.5" (1.3 cm) 0.5" (1.3 cm) 0.5" (1.3 cm)
Point Diameter 0.094" (0.24 cm) 0.094" (0.24 cm) 0.094" (0.24 cm) 0.094" (0.24 cm) 0.125" (0.32 cm) 0.125" (0.32 cm) 0.125" (0.32 cm)
Knife Length 0.572" (1.5 cm) 0.572" (1.5 cm) 0.572" (1.5 cm) 0.572" (1.5 cm) 0.693" (1.8 cm) 0.693" (1.8 cm) 0.693" (1.8 cm)
Handle Color Orange/Gray Orange Orange/Gray Orange Orange/Gray Orange Orange
Handle Finish 3-Layer Insulated 2-Layer Insulated 3-Layer Insulated 2-Layer Insulated 3-Layer Insulated 2-Layer Insulated 2-Layer Insulated
Overall Length 6.9" (17.5 cm) 6.9" (17.5 cm) 7.43" (18.9 cm) 7.37" (18.7 cm) 8.77" (22.3 cm) 8.91" (22.6 cm) 8.91" (22.6 cm)
Safety, PPE and Comfort
Jaw Width 0.688" (1.7 cm) 0.688" (1.7 cm) 0.688" (1.7 cm) 0.688" (1.7 cm) 1.02" (2.6 cm) 1.02" (2.6 cm) 1.02" (2.6 cm)
Tool Kits
Jaw Length 1.9" (4.8 cm) 1.969" (5 cm) 2.42" (6.1 cm) 2.43" (6.2 cm) 2.32" (5.9 cm) 2.32" (5.9 cm) 2.32" (5.9 cm)
EINS INSULATED 3-Layer Protection
Conduit Tools and Measurement
12 AWG SKINNING HOLE
Cat. No. 2036EINS D203-6-INS 2037EINS D203-7-INS 2038EINS D203-8-INS D203-8N-INS
HANDLE FINISH
2038EINS
Drivers and Wrenches
Includes core insulated features plus: Knurled jaws for sure wrapping and looping Curved handles provide greater tool control (Cat. Nos. 2036EINS, D203-6-INS, 2037EINS, and D203-7-INS) Extended handles provide added reach and leverage (Cat. Nos. D203-8-INS and D203-8N-INS) Heavier design for easier, more comfortable cutting and extended handle for added reach and leverage (Cat. No. 2038EINS) Skinning hole for No. 12 AWG wire (Cat. No. D203-8N-INS)
Insulated Combination Pliers Jobsite Accessories
Includes core insulated features plus:
• non-insulated connectors, lugs and terminals • Toothed pipe-grip for greater power 12098EINS
Jaw Width 1.02" (2.6 cm) 1.02" (2.6 cm)
Jaw Thickness 0.55" (1.4 cm) 0.55" (1.4 cm)
Knife Length 0.711" (1.8 cm) 0.711" (1.8 cm)
Handle Color Orange/Gray Orange
Handle Finish 3-Layer Insulation 2-Layer Insulation
Overall Length 8.71" (22.1 cm) 8.76" (22.3 cm)
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
Voice/Data/Video
Jaw Length 1.78" (4.5 cm) 1.78" (4.5 cm)
Tool Storage
Cat. No. 12098EINS 12098-INS
HANDLE FINISH
Insulated Pump Pliers Test and Measurement
Includes core insulated features plus: Secure tongue and groove design for non-slip grip – even with heavy pressure
•
HANDLE FINISH
Cat. No. 50210EINS D502-10-INS
Jaw Capacity 1.75" (4.5 cm) 1.75" (4.5 cm)
Handle Color Orange/Gray Orange
Handle Finish 3-Layer Insulation 2-Layer Insulation
Overall Length 10.29" (26.1 cm) 10.3" (26.2 cm)
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
143
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
50210EINS
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort
Insulated Insulated Crimping/Cutting Tool Includes core insulated features plus: Tapered nose design for working in confined spaces Crimping dies marked for insulated and non-insulated solderless terminals and connectors Accommodates wire from 10 to 22 AWG Wire cutter in nose
• • • •
Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories
1005-INS
Cat. No. 1005-INS
Crimps 10-22 AWG Insulated and Non-Insulated Terminals
Handle Color Orange
Handle Finish 2-Layer Insulation
Overall Length 10" (25.4 cm)
INS INSULATED 2-Layer Protection
Insulated Wire Stripper/Cutters Includes core insulated features plus: Cuts, strips, loops and gauges wire Spring-loaded for self-opening Compact, lightweight wire-stripping and cutting tool Narrow serrated nose fits into tight places for easy bending, shaping and pulling of wire Cat. Nos. 11054EINS and 11055-INS cleanly shear 6-32 and 8-32 screws Do not use for cutting steel wire or bolts Hardened spring steel with precision-ground stripping holes for easy removal of insulation
• • • • • • •
Strips and Cuts Solid AWG Stranded AWG
Cat. No.
11054EINS
Screw Shearing
Handle Color
Handle Finish
Overall Length
Orange Orange
2-Layer Insulated 2-Layer Insulated
7" (17.8 cm) 7" (17.8 cm)
Orange/Gray Orange
3-Layer Insulated 2-Layer Insulated
7.7" (19.6 cm) 7.7" (19.6 cm)
HANDLE FINISH
Straight Handle
11045-INS 11049-INS
10-18 —
— 8-16
— —
Klein-Kurve™ comfort grip handles
11054EINS 11055-INS
8-16 10-18
10-18 12-20
6-32 and 8-32 6-32 and 8-32
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
Insulated Cable Cutter Includes core insulated features plus: Cable-gripping shear-type jaws Precision, one-hand shearing action Perfect for working in confined spaces Do NOT use to cut steel or ACSR
• • • •
HANDLE FINISH 63050-EINS
Cat. No. 63050-EINS 63050-INS
Cutting Capacity 4/0 Aluminum, 2/0 Soft Copper, 100-Pair 24 AWG Communications Cable 4/0 Aluminum, 2/0 Soft Copper, 100-Pair 24 AWG Communications Cable
Handle Color Orange/Black Orange
Handle Finish 3-Layer Insulated 2-Layer Insulated
Overall Length 9.625" (24.5 cm) 9.625" (24.5 cm)
INS INSULATED 2-Layer Protection
Insulated Lineman’s Skinning Knife HANDLE FINISH
Includes core insulated features plus: Large molded, comfort grip handle with measuring marks to help measure stripping length of wire Tough, tempered steel blade provides maximum sharpness and durability to withstand frequent cable scoring Notch on back of blade for scraping or removing insulation
• • •
Cat. No. 1571INS
Lifting, Pulling, and Structural
HANDLE FINISH
144
Special Features Measuring Marks on Handle
Blade Length 2.375" (6 cm)
www.kleintools.com > 800-553-4676
1571INS
Blade Material 1095 Steel
Handle Color Orange
Handle Finish 2-Layer Insulated
Overall Length 8.75" (22.2 cm)
INS INSULATED 2-Layer Protection
EINS INSULATED 3-Layer Protection
Insulated Screwdrivers and Nut Drivers
Strippers, Cutters, and Crimpers
Klein insulated tools meet or exceed the IEC 60900:2018 and ASTM F-1505-16 standards, for insulated tools, and are clearly marked with the official 1000-volt rating symbol
Drivers and Wrenches
Traditional Klein Insulated Tools house thick, exceptionally tough, high-dielectric white inner coating that is bonded to the tool All Klein Insulated Tools have orange impact and flame resistant insulation that protects from electric shock
Tip-Ident™ quickly identifies size
Conduit Tools and Measurement
Durable, two layer, molded insulation is unique to Traditional Klein Insulated Tools
Slim-tip Insulated Tools allow greater access into tight spaces
from rom Klein's US-made proprietary blend
WARNING: Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. WARNING: Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
WARNING: Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
WARNING: Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
Jobsite Accessories
Insulated Slim-Tip Screwdrivers • Clearly marked with the official 1000-Volt rating symbol • Slim tip that allows for greater access into tight spaces • Tip sits flush with the tip helping to reduce insulation chipping and cracking. y of sets • •
Tool Storage
Shank Type Round Round
Shank Length 6" (15.2 cm) 4" (10.2 cm)
Overall Length 10.31" (26 cm) 8.31" (21 cm)
1/4" Cabinet #1 Phillips
Round Round
6" (15.2 cm) 6" (15.2 cm)
10.31" (26 cm) 10.31" (26 cm)
#2 Phillips #2 Phillips #1 Square #1 Square #2 Square #2 Square
Round Round Round Round Round Round
4" (10.2 cm) 6" (15.2 cm) 4" (10.2 cm) 6" (15.2 cm) 4" (10.2 cm) 6" (15.2 cm) Magnetizer/ Demagnetizer
8.31" (21 cm) 10.31" (26 cm) 8.31" (21 cm) 10.31" (26 cm) 8.31" (21 cm) 10.31" (26 cm)
— • — — • — — — — — —
• • — — • — — — — • —
145
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
• • — • • — — — — • •
Power Tools and Accessories
6934INS 6936INS 6984INS 6986INS 6944INS 6946INS MAG2
Tip Type 3/16" Cabinet 1/4" Cabinet
Insulated Slim-Tip Screwdrivers Sets 33732INS 33734INS 33736INS 2-Pc Insulated 4-Pc Insulated 6-Pc Insulated
Test and Measurement
6926INS 6956INS
6946INS
6934INS
Voice/Data/Video
6924INS
6916INS
Safety, PPE and Comfort
WARNING: Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
Tool Kits
FORGED STEEL
Cat. No. 6916INS 6924INS
Pliers
Cushion-Grip handles for greater torque and comfort
Pliers
Insulated Screwdrivers - Round-Shank Includes core insulated screwdriver features plus: Klein’s profilated Phillips provides a more consistent geometric symmetry than conventional Phillips screwdrivers Square-Recess tips are perfect for electrical, telephone and work in recessed holes and other tight spaces
• •
6037INS
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Insulated
Cat. No. 6334INS 603-4-INS 6037INS 6337INS 607-3-INS 612-4-INS 601-4-INS 601-7-INS 602-4-INS 605-7-INS 602-7-INS 602-8-INS 661-4-INS 661-7-INS 662-4-INS 662-7-INS
Tip Type #1 Phillips #2 Phillips #2 Phillips #3 Phillips 3/32" (2.4 mm) Cabinet Tip 1/8" (3.2 mm) Cabinet Tip 3/16" (4.8 mm) Cabinet Tip 3/16" (4.8 mm) Cabinet Tip 1/4" (6.4 mm) Cabinet Tip 1/4" (6.4 mm) Cabinet Tip 5/16" (7.9 mm) Cabinet Tip 3/8" (9.5 mm) Cabinet Tip #1 Square #1 Square #2 Square #2 Square
Shank Type Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round
Shank Length 4" (10.2 cm) 4" (10.2 cm) 7" (17.8 cm) 7" (17.8 cm) 3" (7.6 cm) 4" (10.2 cm) 4" (10.2 cm) 7" (17.8 cm) 4" (10.2 cm) 7" (17.8 cm) 7" (17.8 cm) 8" (20.3 cm) 4" (10.2 cm) 7" (17.8 cm) 4" (10.2 cm) 7" (17.8 cm)
Overall Length 7.75" (19.7 cm) 8.313" (21.1 cm) 11.313" (28.7 cm) 12.375" (31.4 cm) 6.75" (17.2 cm) 7.75" (19.7 cm) 7.75" (19.7 cm) 10.75" (27.3 cm) 8.313" (21.1 cm) 11.313" (28.7 cm) 12.375" (31.4 cm) 13.375" (34 cm) 8.313" (21.1 cm) 11.313" (28.7 cm) 8.313" (21.1 cm) 11.313" (28.7 cm)
Cushion-Grip Screwdriver Sets 33528 33532-INS 9-Pc Insulated 2-Pc Insulated z — z
z
—
— — — — — —
z
— z z z z
z
—
— — — — — — —
z z
— — — —
Interchangeable Insulated Screwdrivers • Securely and easily release the blade with a quick twist of the lock collar • Interchangeable blades with a slim-tip to fit tight terminal blocks • Handle and blade have a 1000V insulation rating • A layer of orange impact and flame resistant insulation protects from electric shock • Meet or exceed ASTM F1505 standards for insulation Set includes handle and carrying pouch
Voice/Data/Video
TWIST FOR A
FAST, EASY BLADE CHANGE
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
32288 32286
Cat. No. 32286 32287 32293 13156 13157
146
Type Insulated Flip-Blade Insulated Flip-Blade Insulated Flip-Blade Single-Ended Replacement Blade, 2-Pack Double-Ended Replacement Blade, 3-Pack
www.kleintools.com > 800-553-4676
Tip Size #1 Phillips & 3/16” (4.8 mm) Slotted #1, #2 Square #2 Phillips & 1/4” (6.4 mm) Slotted #2 Phillips & 1/4” (6.4 mm) Slotted #1 Phillips & 3/16” (4.8 mm) Slotted, #2 Phillips & 1/4" (6.4 mm) Slotted, #1, #2 Square
Shank Length 3.5’’ (8.9 cm) 3.5’’ (8.9 cm) 3.5’’ (8.9 cm) 3.5’’ (8.9 cm) 3.5’’ (8.9 cm)
Overall Length 8.2’’ (20.8 cm) 8.2’’ (20.8 cm) 8.2’’ (20.8 cm) 7.58’’ (19.3 cm) 7.48’’ (19.0 cm)
Interchangeable Screwdriver Set 32288 6-Pc — — — z z
Pliers
Insulated
Strippers, Cutters, and Crimpers
6" (15 cm) Insulated Hollow-Shaft Nut Drivers Includes core insulated nut driver features plus: Slimmer molded insulation with increased durability
•
Drivers and Wrenches
33524
Conduit Tools and Measurement
646-5/8-INS
Color Code Black Red Yellow Green Blue Brown Red Orange Yellow
Overall Length 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 10.313" (26.2 cm) 10.313" (26.2 cm) 11.375" (28.9 cm) 11.375" (28.9 cm) 11.375" (28.9 cm)
Cushion-Grip Nut Driver Sets 33524 9-Pc Insulated z z z z z z z z z
Jobsite Accessories
Shaft Length 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm)
Safety, PPE and Comfort
Nut Driver Sizes 3/16" 1/4" 5/16" 11/32" 3/8" 7/16" 1/2" 9/16" 5/8"
Tool Kits
Cat. No. 646-3/16-INS 646-1/4-INS 646-5/16-INS 646-11/32-INS 646-3/8-INS 646-7/16-INS 646-1/2-INS 646-9/16-INS 646-5/8-INS
3/16" magnetic nut driver does not have hollow shaft.
Tool Storage
5-Piece Insulated Tool Kit kit includes the must-have insulated tools for any • 5-Piece professional tradespersons
Test and Measurement
Cat. No. 94130
Voice/Data/Video
tools meet or exceed ASTM F1505 and IEC 60900 standards • All for insulated tools insulation with underlayer on the pliers and wire stripper • Three-part provides warning sign that insulation may be compromised. VDE Certified • Made in the USA
94130
147
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Kit Contains 1000V Insulated Tool Kit, 5-Piece Cat. No. Description 11054EINS Insulated Wire Stripper/Cutter 200028EINS 8" Insulated Diagonal Cutters 2139NEEINS 9" Insulated Side-Cutters, Slim Handle 6924INS Slim-Tip Insulated 1/4" Cabinet, Screwdriver, 4" Round Shank 6934INS Slim-Tip Insulated #2 Phillips Screwdriver, 4" Round Shank
Pliers Strippers, Cutters, and Crimpers
Utility Insulated 13-Piece Tool Kit with Roll-up Case • Cuts ACSR, screws, nails, and most hardened wire (Cat. No. D2000-9NE-INS, D2000-28-INS, D2000-48-INS) • The light, compact, soft roll-up carry case provides protective storage with custom-fitted pockets for each tool • Kit includes a padded, adjustable shoulder strap • Case dimensions: Opened 24-1/2" x 24-1/2" (62.2 cm x 62.2 cm), Closed 24-1/2" x 5-1/2" (62.2cm x 14.0 cm) Cat. No. 33525SC
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Insulated
Kit Contains 13-Piece Insulated Utility Tool Kit, Soft Case Cat. No.
Description
D2000-9NE-INS D2000-28-INS D2000-48-INS D203-8-INS 602-4-INS 602-7-INS 602-8-INS 6334INS 603-4-INS 6337INS 63050-INS D502-10-INS 1571INS 33535SC
Side Cutting Pliers, Heavy Duty Insulated, 9" Diagonal-Cutting Pliers, Insulated, 8" Insulated Pliers, 8" Diagonal Cutters Long Nose Cutting Pliers, Insulated, 8" 1/4" Cabinet Tip Insulated Screwdriver, 4" Insulated Screwdriver, 5/16" Cabinet, 7" Insulated Screwdriver, 3/8" Cabinet, 8" Insulated Screwdriver, #1 Phillips Tip, 4" Insulated Screwdriver, #2 Phillips Tip, 4" Insulated Screwdriver, #3 Phillips, 7" Shank Cable Cutter, Insulated 10" Pump Pliers, Insulated Lineman's Skinning Knife, Insulated Case for Utility Tool Kit 33525SC
Jobsite Accessories
Safety, PPE and Comfort
See individual tool listing for more details.
General-Purpose Insulated 22-Piece Tool Kit • (Cat. No. D2000-9NE-INS, D2000-28-INS, and D2000-48-INS) Cuts ACSR, screws, nails, and most hardened wire includes three pallets with custom-fitted pockets for each tool, piano-hinged cover has both a combination lock and • Case two key-locked latches for security, storage space behind the pallets to keep important papers and accessory items • Inside dimensions: 7-3/4" W x 14-1/4" D x 8" H (19.7 cm x 36.2 cm x 20.3 cm) • Overall dimensions: 18-7/8" W x 15-3/8" D x 8-1/4" H (47.9 cm x 39.1 cm x 21.0 cm) • Replacement case (Cat. No. 33537) available 33527
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Cat. No.
Lifting, Pulling, and Structural
33525SC
Kit Contains 22-Piece General Purpose Insulated Tool Kit Cat. No.
Description
D2000-9NE-INS 12098-INS D2000-28-INS D2000-48-INS D203-8N-INS D220-7-INS D203-6-INS D203-7-INS 601-4-INS 601-7-INS 612-4-INS 602-4-INS 602-7-INS 602-8-INS 6334INS 603-4-INS 6337INS D502-10-INS 11045-INS 63050-INS 1571INS 1005-INS 33537
Side Cutting Pliers, Heavy Duty Insulated, 9" Insulated Universal Combination Pliers, 8" Diagonal-Cutting Pliers, Insulated, 8" Insulated Pliers, 8" Diagonal Cutters Long Nose Cutting Pliers, Insulated 8" Skinner Insulated Pliers, Diagonal Cutters, 7" Long Nose Cutting Pliers, Insulated, 6" Long Nose Side Cutting Pliers, Insulated, 7" Insulated Screwdriver, 3/16" Cabinet, 4" Insulated Screwdriver, 3/16" Cabinet, 7" Insulated 1/8" Slotted Screwdriver, 4" 1/4" Cabinet Tip Insulated Screwdriver, 4" Insulated Screwdriver, 5/16" Cabinet, 7" Insulated Screwdriver, 3/8" Cabinet, 8" Insulated Screwdriver, #1 Phillips Tip, 4" Insulated Screwdriver, #2 Phillips Tip, 4" Insulated Screwdriver, #3 Phillips, 7" Shank 10" Pump Pliers, Insulated Insulated Wire Stripper and Cutter Insulated Cable Cutter Insulated Lineman's Skinning Knife Insulated Crimping/Cutting Tool Case for Insulated Tool Kit 33527
See individual tool listing for more details.
148
www.kleintools.com > 800-553-4676
33527
Pliers
Insulated
Strippers, Cutters, and Crimpers
Utility Insulated 13-Piece Tool Kit • Cuts ACSR, screws, nails, and most hardened wire (Cat. No. D2000-9NE-INS, D2000-28-INS, D2000-48-INS) custom case includes two pallets with custom-fitted pockets for each tool, piano-hinged case cover • The has both a combination lock and two key-locked latches for security, storage space behind the pallets to keep important papers and accessory items
Cat. No. 33525
Drivers and Wrenches
• Inside dimensions: 17-3/4" W x 14-1/4" D x 8" H (45.1 cm x 36.2 cm x 20.3 cm) • Overall dimensions: 18-7/8" W x 15-3/8" D x 8-1/4" H (47.9 cm x 39.1 cm x 21.0 cm) • Replacement case (Cat. No. 33535) available Kit Contains 13-Piece Insulated Utility Tool Kit, Hard Case
33525
See individual tool listing for more details.
•
•
Insulated Side Cutting Pliers, Heavy Duty, 9" Insulated Pliers, 8" Diagonal Cutters Insulated Long Nose Cutting Pliers, 8" Skinner Insulated Screwdriver, 3/16" Cabinet, 6" Insulated Screwdriver, 1/4" Cabinet Tip, 4" Insulated Screwdriver, #2 Phillips Tip, 4" Insulated Cable Cutter Insulated Klein-Kurve® Wire Stripper/Cutter Case for Insulated Tool Kit 33529
See individual tool listing for more details.
33529
Cat. No. 33526
Kit Contains 8-Piece Basic Insulated Tool Kit Cat. No.
Description
D213-9NE-INS D228-8-INS D203-8N-INS 601-6-INS 602-4-INS 603-4-INS 63050-INS 11045-INS 33536
Insulated Side Cutting Pliers, New England, 9" Insulated Diagonal Cutting Pliers, 8" Insulated Long Nose Cutting Pliers, 8" Skinner Insulated Screwdriver, 3/16" Cabinet Tip, 6" Insulated Screwdriver, 1/4" Cabinet Tip, 4" Insulated Screwdriver, #2 Phillips Tip, 4" Insulated Cable Cutter Insulated Wire Stripper and Cutter Case for Insulated Tool Kit 33529
Power Tools and Accessories
•
polypropylene handles, custom-fitted tool pockets Overall case dimensions are: 15-1/2" W x 11" D x 2-1/2" H (39.4 cm x 27.9 cm x 6.4) Replacement case (Cat. No. 33536) available
Description
D2000-9NE-INS D2000-48-INS D203-8N-INS 601-6-INS 602-4-INS 603-4-INS 63050-INS 11055-INS 33536
Test and Measurement
Basic Insulated 8-Piece Tool Kit durable, black nylon case • Highly features: nylon-zipper closure,
Cat. No.
Voice/Data/Video
•
Cut ACSR, screws, nails and most hardened wire Highly durable, black nylon case features: nylon-zipper closure, polypropylene handles, custom-fitted tool pockets Overall case dimensions are: 15-1/2" W x 11" D x 2-1/2" H (39.4 cm x 27.9 cm x 6.4 cm) Replacement case (Cat. No. 33536) available
Kit Contains 8-Piece Premium Insulated Tool Kit
Tool Storage
•
Cat. No. 33529
Jobsite Accessories
Premium Insulated 8-Piece Tool Kit No. D2000-9NE-INS, • (Cat. D2000-28-INS, D2000-48-INS)
Safety, PPE and Comfort
Side Cutting Pliers, Heavy Duty Insulated, 9" Diagonal-Cutting Pliers, Insulated, 8" Insulated Pliers, 8" Diagonal Cutters Long Nose Cutting Pliers, Insulated, 8" 1/4" Cabinet Tip Insulated Screwdriver, 4" Insulated Screwdriver, 5/16" Cabinet, 7" Insulated Screwdriver, 3/8" Cabinet, 8" Insulated Screwdriver, #1 Phillips Tip, 4" Insulated Screwdriver, #2 Phillips Tip, 4" Insulated Screwdriver, #3 Phillips, 7" Shank Insulated Cable Cutter Insulated 10" Pump Pliers Insulated Lineman's Skinning Knife Case for Utility Tool Kit 33525
Tool Kits
Description
D2000-9NE-INS D2000-28-INS D2000-48-INS D203-8-INS 602-4-INS 602-7-INS 602-8-INS 6334INS 603-4-INS 6337INS 63050-INS D502-10-INS 1571INS 33535
Conduit Tools and Measurement
Cat. No.
See individual tool listing for more details.
33526
149
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Test and Measurement Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
PERSONAL PROTECTION AND SAFETY EQUIPMENT
Lifting, Pulling, and Structural
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
NON-VENTED CLASS E Specifically built with electricians and linemen in mind, these non-vented hard hats are tested up to 20kV.
Tool Kits
Available in Cap Style and Full Brim
Safety, PPE and Comfort
VENTED CLASS C Built for the demands of general construction, plumbing, carpentry and iron worker use, these hard hats include adjustable vents that can be opened and closed. These hard hats do not provide electrical protection.
Jobsite Accessories
Available in Cap Style and Full Brim
3
Replaceable, Top Comfort Pad Sweat-wicking and breathable padding with anti-microbial and odor control materials; machine washable. Prevents straps from digging into your head. (Replacement Cat. No. KHHTOPPAD)
4
Rear Neck Pad Soft, non-slip rear pad provides excellent cushion and grip.
5
Multi-Point Adjustment allows user to choose the best position for enhanced fit and comfort.
6
Chin Strap Attachment Points Chin Strap is sold separately. (Cat. No. KHHSTRP)
7
Replaceable, Sweatband Front and side coverage; sweat-wicking and breathable padding with anti-microbial and odor control materials; machine washable. (Replacement Cat. No. KHHSWTBND)
8
Ratchet Adjustment large knob mechanism allows for easy one-hand adjustment, even with gloves on.
3 4
2
5
1
6
7
Lifting, Pulling, and Structural
Pivot Adjustment allows user to position the ratchet mechanism to clear bandana knots and pony-tails.
Power Tools and Accessories
2
8
Test and Measurement
Flexible, Open-Frame Design allows suspension to conform to user’s head, provides optimal fit, and improved ventilation.
Voice/Data/Video
1
Tool Storage
SAFETY, COMFORT & FIT
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement
Hard Hats Hard Hats accessory mounts on front and back ensure optional Klein Headlamps and optional accessories attach • Patent-pending securely and precisely, every time — no straps or zip ties needed! • Unique suspension system features a flexible open frame design to provide optimal fit and improved air circulation • Breathable, padded sweat-wicking sweatband and top pad improve comfort and are machine washable one-handed adjustment with large knob ratchet mechanism even with gloves on and • Easy, soft neck pad pivots to clear bandana knots and pony tails • Universal accessory slots on both sides for attaching hearing protection, face shield and more • Reverse donning: Suspension can be switched to wear hard hat backwards Non-Vented Class E, Type 1 Hard Hats up to 20kV, meets ANSI Z89.1-2014 (R2019), CSA Z94.1-15 (R2020); • Tested EN397:2012+A1:2012-5.2.4 (Lateral Deformation-LD)*; EN12492:2012-4.2.1.2,
*Full brim only
4.2.1.3, 4.2.1.4 (Front/Back/Side impact) Cat. No.
Class
60100 60535
E E
60107
E
60107RL 60248 60249 60400 60406RL 60489
E E E E E E
SHELL COLORS
SKU Description Cap Style, Non-vented, White Cap Style, Non-vented, Yellow Cap Style, Non-vented, Alkaline Headlamp # KHH56220, White Cap Style, Non-vented, Rechargeable Headlamp #56062, White Cap Style, Non-vented, Blue Full Brim, Non-vented, Blue Full Brim, Non-vented, White Full Brim Non-vented, Rechargeable Headlamp #56062, White Full Brim, Non-vented, Yellow
60107RL
60400
Alkaline headlamp (Cat. No. KHH56220) includes 3 x AAA batteries
REVERSE DONNING
Suspension can be easily adjusted to wear hard hat frontwards or backwards. Available on both vented and non-vented hard hats.
For more details on Headlamps, Safety Lamp and Hard Hat Accessories, see page 155 SHELL COLORS
Vented Class C, Type 1 Hard Hats C, Type 1 hard hats with adjustable vents meet ANSI Z89.1-2014, • Class CSA Z94.1-15; EN397:2012+A1:2012-Lateral Deformation (LD) standards* vents can be opened or closed for maximum • Adjustable air circulation while meeting stringent safety standards
*Full brim only
Cat. No.
Class
60105 60113RL 60401 60407 60407RL 60262
C C C C C C
SKU Description Cap Style, Vented, White Cap Style, Vented, Rechargeable Headlamp #56062, White Full Brim, Vented, White Full Brim, Vented, Alkaline Headlamp # KHH56220, White Full Brim, Vented, Rechargeable Headlamp #56062, White Full Brim, Vented, Yellow
60105
Lifting, Pulling, and Structural
Power Tools and Accessories
Alkaline headlamp (Cat. No. KHH56220) includes 3 x AAA batteries 60407RL
Scope of Z89.1-2014 (R2019) American National Standard for Head Protection TYPE I (Top Impact) Helmets intended to reduce the force of an impact to the top of a wearer's head. TYPE II (Top and Lateral Impact) Helmets intended to reduce the force of an impact resulting from a blow received off-center or to the top of a wearer's head. Electrical Performance CLASS E (Electrical) Helmets intended to reduce the danger of exposure to high-voltage electrical conductors, proof-tested at 20,000 volts. CLASS G (General) Helmets intended to reduce the danger of exposure to low-voltage electrical conductors, proof-tested at 2,200 volts. CLASS C (Conductive) Helmets not intended to provide protection from electrical conductors.
152
www.kleintools.com > 800-553-4676
Pliers
Hard Hats
Strippers, Cutters, and Crimpers
KARBNTM Series Full Brim Hard Hats modern, durable hydro-dipped • Stylish, polymer film KARBN™ pattern on rugged PC/ABS composite
Drivers and Wrenches
TYPE I, CLASS E
stickers enhance vis • Reflective low light environments
ELECTRICAL PROTECTION UP TO 20KV
60346
Conduit Tools and Measurement
60345
Tool Kits
TYPE I, CLASS C
ADJUSTABLE SIDE VENTS HELP MANAGE AIR CIRCULATION
Safety, PPE and Comfort
60347
Jobsite Accessories
LOOK COOL; STAY COOL! Replaceable machine washable, breathable padded blue premium sweatband and comfort top pad feature advanced evaporative technology and additional coverage. Simply wet and shake out for hours of cooling!
Tool Storage
UPC 0-92644+ Description
Class
™
60345
60345-7
KARBN Full Brim Hard Hat
E
60346 60347
60346-4 60347-1
KARBN™ Full Brim Hard Hat w/Rechargeable Auto-Off Headlamp 56048 KARBN™ Full Brim Hard Hat, Vented w/Rechargeable Auto-Off Headlamp 56048
E C
60438-6 60437-9 60436-2
Replacement Suspension for KARBN™ Full Brim Hard Hats Replacement Premium Cooling Sweatband, Blue Replacement Premium Top Pad, Blue
ACCESSORIES
Pkg Qty 1 pc. 3-pack 3-pack
Power Tools and Accessories
KHHSPN2 KHHSWTBND2 KHHTOPPAD2
KHHTOPPAD2 Premium Top Pad Replacement (3-pack)
Test and Measurement
Cat. No.
KHHSWTBND2 Premium Cooling Sweatband Replacement (3-pack)
Featured Headlamp (also sold separately) 56048
Voice/Data/Video
KHHSPN2 Open Frame Suspension (shown here with sweatband)
56048-4
Rechargeable Auto-Off Headlamp, 400 Lumens (incl with 60346, 60347)
1 pc.
www.kleintools.com > 800-553-4676
153
Lifting, Pulling, and Structural
NOTE: KHHSPN2 does not come with Premium top pad (KHHTOPPAD2) and Premium Sweatband (KHHSWTBND2), these items need to be purchased separately.
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Safety Helmets front/back accessory mounts ensure • Patent-pending Klein Headlamps attach securely suspension along with chin strap provides improved • 6-point stability and secure fit when tilting your head padded sweat-wicking sweatband and • Breathable comfort top pad are machine washable one-handed adjustment with large knob • Easy, ratchet mechanism • Detachable 4-point padded chin strap for comfortable secure fit Helmets meet: Type I ANSI/ISEA Z89.1-2014 (R2019), • These CSA Z94.1-15 (R2020): Class E non-vented Safety Helmets have been tested up to 20kV. EN397:2012+A1:2012 (Clauses listed only): • 5.2.1 – Shock at Very Low Temperature • 5.2.4 – Lateral Deformation (LD) • 5.2.5 – Molten metal Splash EN12492:2012 (Listed clauses only): • 4.2.1.2 – Front Energy Absorption Capacity • 4.2.1.3 – Side Energy Absorption Capacity • 4.2.1.4 – Rear Energy Absorption Capacity • 4.2.2 – Resistance To Penetration • 4.2.3 – Retention System Strength • 4.2.4 – Retention System Effectiveness (roll off)
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Safety Helmets
Cat. No. 60145 60146 60147 60148 60149 60150
Description Safety Helmet, Non-Vented- Class E Safety Helmet w/Rech Headlamp #56062, Non-Vented- Class E Safety Helmet, Non-Vented-Class E Safety Helmet w/Rech Headlamp #56062, Non-Vented- Class E Safety Helmet, Vented-Class C Safety Helmet w/Rech Headlamp #56062, Vented-Class C
Venting — — — — Adjustable Vents Adjustable Vents
60145
60147
60149
60146
60148
60150
Shell Color White White Blue Blue White White
Safety Helmet Accessories For exclusive use with Klein Tools' Safety Helmets (Cat. Nos. 60145, 60146, 60147, 60148, 60149, and 60150) Chin Strap (Cat. No. CLMBRSTRP) helps keep safety helmets in place during high winds, at height, or in confined work CLMBRSPN* positions with multi-point attachments; detachable and replaceable *Shown with top pad and sweatband, all sold separately. 6-point suspension (Cat. No. CLMBRSPN) features flexible open frame design and ratchet-knob adjustment for a secure fit Replaceable Sweatband and Top Pad are machine washable
Tool Storage
• • •
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
CLMBRSTRP Cat. No. CLMBRSPN
Description Safety Helmet Suspension
Special Features 6-Point Attachment, Ratchet Adjustment
CLMBRSTRP
Safety Helmet Chin Strap
Detachable and Adjustable
KHHTOPPAD Top Comfort Pad KHHSWTBND Suspension Sweatband
Sold as 3-Pack Sold as 3-Pack
KHHTOPPAD
KHHSWTBND
Safety Helmet Visors Designed with lightweight materials and vents for adequate ventilation offer long term comfort, specifically to fit Klein Tools Safety Helmets only (Cat. Nos. 60145, 60146, 60147, 60148, 60149, 60150).
• and MIL-PRF-32432A Clause 3.8.4.1 (Class 1-ballistics fragmentation) standards (See instructions for details)
• High Clarity Visor: Optical Class-1 • Anti-fog • Scratch Resistant • UV Protection: effectively blocks 99.9% harmful UV-A, UV-B, and UV-C rays • Locks in up and down position to maintain desired position when moving head 154
www.kleintools.com > 800-553-4676
VISORCLR VISORS FOR SAFETY HELMETS Cat. No. Window Dimensions VISORCLR 7" (17.8 cm) x 4" (10.1 cm) VISORGRAY 7" (17.8 cm) x 4" (10.1 cm)
VISORGRAY
Lens Color Clear Gray Tint
Material Polycarbonate Polycarbonate
Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Safety, PPE and Comfort Jobsite Accessories
KHHSPN
KHHTOPPAD
Tool Storage
KHHSWTBND
Voice/Data/Video Test and Measurement
KHHSTRP
Cat. No. KHHSPN KHHTOPPAD KHHSWTBND KHHSTRP
Description Hard Hat Replacement Suspension Hard Hat Replacement Top Pad Hard Hat Replacement Sweatband Hard Hat Chin Strap
Package Quantity 1 3 3 1
155
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
• Hard Hat Replacement Sweatband (Cat. No. KHHSWTBND) • Hard Hat Replacement Top Pad (Cat. No. KHHTOPPAD) Built with durable padded materials; enhances long-term • comfort by reducing pressure on the head Sweat-wicking control properties to • improve coolingandandodor maintain freshness longer • Extended coverage: wicks away sweat from forehead and the side of your head • Replaceable and machine washable to stay fresh and reuse multiple times attaches to Klein hard hats suspension • Easily system with hook and loop attachment • Fits both full brim and cap style hard hats • Available in 3-pack replacement • Hard Hat Chin Strap (Cat. No. KHHSTRP) keep hard hats in place during high winds, • Helps at height, or unusual work positions • Multi-point attachment to Klein Tools Hard Hat Suspension with 4 clips • Easily adjusts for personalized comfort and fit • Detachable and replaceable • Durable, non-conductive nylon strap material • Convenient snap design for quick lock/unlock • Soft Chin Cup for added comfort and grip
Strippers, Cutters, and Crimpers
HARD HAT
ACCESSORIES
Pliers
Hard Hat Replacement Parts and Accessories • Hat Suspension features flexible open frame design easily • Hard conforms to your head, allowing maximum ventilation adjustment; easy one-hand adjustment, • Ratchet-knob even with work gloves on pivot allows ratchet adjustment to be • Suspension positioned on the neck for secure fit and clear bandana knots • 4-point suspension; multi-level height adjustment • Adjustment size: Hat sizes 6.5 to 8 (52 to 64 cm) • Fits both cap and full brim style hard hats Replacement suspension does NOT come with sweatband (KHHSWTBND) • Note: or top pad (KHHTOPPAD). Those must be purchased separately.
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Headlamps Rechargeable 400 Lumen Headlamp with Silicone Strap • Rechargeable 400 lumen LED Headlamp has 3 bright lighting modes and long, all-day battery life Headlamp automatically turns off after 3 minutes in bright light via • auto-sensing technology, extending battery life (feature can be disabled) • Battery gauge indicates level of battery life with colored LED lights with the adjustable silicone strap or the smartly designed bracket • Wear that attaches directly to Klein Hard Hats (those equipped with bracket system) • Slim profile with pivoting mount to allow up to a 64° lighting angle • Durable headlamp: drop-test rating of 6' (1.8 m), IP54 dust and water resistant
56064
®
Cat. No.
Description
56064
Rechargeable Headlamp w/ Silicone Strap, 400 L All-Day Runtime, Auto-Off
Lumens Boost: 400 High: 200 Low: 100
Battery Life 4 hrs 12 hrs 22 hrs
Batteries
Drop Protection
Lithium-Ion
6' (1.8 m)
Rechargeable 400 Lumen Headlamp with Fabric Strap • • Headlamp automatically turns off after 3 minutes in bright light via auto-sensing technology, extending battery life • Battery gauge indicates level of battery life with colored LED lights • Smartly designed headlamp bracket also attaches directly to Klein Hard Hats equipped with bracket system • Slim profile with pivoting mount to allow up to a 64° lighting angle • Adjustable fabric strap with woven silicone grip • Durable headlamp: drop-test rating of 6' (1.8 m), IP54 dust and water resistant
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
®
Cat. No.
Description
56048
Rechargeable Headlamp with Strap, 400 Lumen All-Day Runtime, Auto-Off
Lumens Boost: 400 High: 200 Low: 100
Battery Life 4 hrs 12 hrs 22 hrs
Batteries
Drop Protection
Lithium-Ion
6' (1.8 m)
56048
Rechargeable Light Array Headlamp with Fabric Strap • Rechargeable headlamp with a rectangular light array offers more usable light field fabric strap with silicone grip comes equipped with a convenient marker • Adjustable and carpenter's pencil holder • Mounts magnetically with a strong backside magnet for use as a work light designed headlamp bracket also attaches directly to Klein Hard Hats • Smartly equipped with bracket system • Battery gauge indicates level of battery life with colored LED lights • Durable headlamp: drop-test rating of 6' (1.8 m), IP54 dust and water resistant ®
Cat. No.
Description
56049
Rechargeable Light Array Headlamp w/ Strap, 260 Lumen, All-Day Runtime
Lumens High: 260 Low: 125
56049
Battery Life 9 hrs 14 hrs
Batteries
Drop Protection
Lithium-Ion
6' (1.8 m)
Rechargeable Headlamp and Worklight • Rechargeable headlamp attaches directly to Klein Hard Hats (equipped with bracket system) • Mount headlamp magnetically with a strong backside magnet for use as a work light • Battery gauge indicates level of battery life with colored LED lights • Slimmer profile light with pivoting mount allows up to a 64° lighting angle • Durable headlamp: drop-test rating of 6' (1.8 m), IP54 dust and water resistant ®
Cat. No. 56062
Description Rechargeable Headlamp and Worklight, 300 Lumens All-Day Runtime
Lumens Boost: 300 High: 215 Low: 100
Battery Life 4 hrs 9 hrs 14 hrs
56062 Batteries
Drop Protection
Lithium-Ion
6' (1.8 m)
See page 157 for details on hard hat Safety Lamp and Intrinsically Safe Headlamp.
156
> 800-553-4676
Pliers
Headlamps
250
30
10hr
27hr
2.5
56hr
10 ft 2.5
160hr
IP65
56414
Material ABS/PC, Silicone Weave in Nylon Elastic Fabric
Conduit Tools and Measurement
Overall Length 2.9" (7.3 cm)
Red LED
5hr
Strobe Solid
40hr
High
100
10hr
500
Med
Low
300
8hr
Eco
Boost High
600
Floodlight
4hr
Headlamp Bracket with Fabric Strap • Smartly designed bracket attaches directly to Klein headlamps equipped with mounting bracket fabric strap contains just enough silicone grip to fit comfortably on your head and stays • Comfort securely on a hardhat or cap • Strap length easily adjusts • Comes equipped with a convenient marker and carpenter pencil holder ®
Description Headlamp Bracket with Fabric Strap
Overall Length 24" (61 cm)
Material ABS/PC, Silicone Weave in Nylon Elastic Fabric
Tool Kits
Cat. No. 56060
Drivers and Wrenches
Description Rechargeable 2-Color LED Headlamp with Adjustable Strap
800
Strobe
Spotlight
®
Cat. No. 56414
Strippers, Cutters, and Crimpers
FL 1 STANDARD
Rechargeable 2-Color LED Headlamp with Adjustable Strap • Rechargeable Headlamp is 3 lights in one: • Focused Spotlight; Wide Floodlight, and low-intensity red LEDs Remove light from bracket for recharging or to attach directly to • Klein Hard Hat mounts • Silicone infused adjustable strap features marker/pencil holder • Drop test rating of 10 ft (3m); IP65 dustproof and waterproof
56060
Safety, PPE and Comfort
Intrinsically Safe LED Headlamp LED Headlamp Standards tested: UL913 7th edition (US and Canada), CSA 22.2 No. 157-92, • Reaffirmed 2012, CLASS I, DIV 1 and 2, GRP ABCD; CLASS II, DIV 1 and 2, GRP EFG; CLASS III; TEMP CODE: T4 safe LED headlamp attaches directly to Klein Hard Hats and • Intrinsically Safety Helmets equipped with Klein accessory mount • Two modes/Runtime: 216 lumens on high/5 hours; 75 lumens on low/12 hours • Powered by 3 x AAA batteries (included) • IP67 rated: waterproof and dust proof • Impact resistant: drop-test rated up to 6.6 feet (2m) • Bracket tilt angle up to 70 degrees on hard hats (max 90 degrees) • Pressure relief valve (on bottom) • Large power / mode button • Includes 1-inch (2.5 mm) Hex Key for covered battery compartment ®
®
Lumens High: 216 Low: 75
Intrinsically Safe LED Headlamp
Battery Life 5 hrs 12 hrs
Batteries
Drop Protection
3xAAA
6.6' (2 m)
Tool Storage
60156
Description
Jobsite Accessories
Cat. No.
60156
Voice/Data/Video
Rechargeable Safety Lamp with Magnet quad-directional multi-LED is visible up to 1/4 mile (0.4 km) • Focused in low light and clear weather operational modes: Pulse (High), Pulse (Low), Solid On (High), • Four Solid On (Low); Up to 52 hours runtime to attach directly to Klein Hard Hats and Safety Helmets with • Designed patent-pending front/back accessory mounts; no straps needed • Attach to magnetic surface to serve as stationary alert beacon • Compact and lightweight design for all day use Quality Red LEDs for exceptional visibility in • High BOTH bright and low light conditions • Durable: drop-test rating of 10-Foot (3 m) • IP64 rated: dust and water resistant for indoor/outdoor use • Rechargeable via USB-C cable (included) • Battery status indicator ®
Rechargeable Safety Lamp with Magnet
Battery Life 52 hrs 10 hrs 22 hrs 5 hrs
Batteries
Drop Protection
Lithium-Ion
10' (3 m)
www.kleintools.com > 800-553-4676
157
Lifting, Pulling, and Structural
Modes Pulse: Low Pulse: High Solid On: Low Solid On: High
Power Tools and Accessories
56063
Description
Test and Measurement
Cat. No.
56063
Pliers
Cooling Fan for Klein Hard Hats and Safety Helmet Fan has powerful dual-fan design • Cooling for efficient airflow on head, neck or face to 6 hours continuous runtime via Modular • Up Rechargeable Battery Cat. No. 29025 (included) design offers 16 ways to cool face, neck or • Modular under shell with long ducts or short ducts (included) mount design: attach to Klein's front/back • Easy mounts; no straps needed • Rechargeable via USB-C cable (included) Cat. No.
UPC 0-92644+
60155 60155-2 Replacement Parts 29025 29025-1 60490 60490-4
60155
29025
SKU Description Hard Hat/Safety Helmet Cooling Fan 60490 Modular Battery Li-ion (3200mAh) Duct and Cable Replacement Kit
Hard Hats/Safety Helmets sold separately
EYEWEAR
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
PPE and Safety
Safety Glasses
60470
60471
High-Quality protective eyewear that feature an anti-fog coating that won't wear off. Scratch resistant lenses with UV protection block 99.9% of harmful UV rays. impact protection: impact tested to the latest ANSI Z87.1+, CSA Z94.3 and • Superior MIL-PRF-32432A Clause 3.8.4.1 (Class 1-ballistics fragmentation) MILITARY STANDARDS • UV Protection: Tested to ANSI Z87.1 U6 standard, which effectively blocks 99.9% harmful UV rays • Non-slip fit; rubber nose piece and temple tips for secure fit and grip • True Color Recognition • Optional Breakaway Lanyard (Cat. No. 60177) and Hard Case (Cat. No. 60176) both sold separately
MIL-PRF-32432A
CSA
Clause 3.8.4.1 Class 1
Z94.3
ANSI Z87.1+
Cat. No.
Description
60159 60160 60161 60162 60163 60164 60171 60172 60173 60174 60470 60471
Standard Safety Glasses, Clear Lens Standard Safety Glasses, Gray Lens Professional Safety Glasses, Clear Lens Professional Safety Glasses, Gray Lens Professional Safety Glasses, Full Frame, Clear Lens Professional Safety Glasses, Full Frame, Gray Lens Standard Safety Glasses, Clear Lens, 2-Pack PRO Safety Glasses-Wide, Clear Lens, 2-Pack PRO Safety Glasses-Semi-Frame, Combo Pack Standard Safety Glasses-Semi Frame, Combo Pack Gasket Safety Glasses with Strap Gasket Safety Glasses with Strap
158
www.kleintools.com > 800-553-4676
Frame Design
Semi-Frame
Full Frame
Semi-Frame
Full Frame
Lens Color Clear Gray Clear Gray Clear Gray Clear Clear Clear / Gray Clear / Gray Clear Gray
60162
60159
60163
60160
60161
60164
Pliers
PPE and Safety Safety Glasses Hard Case lightweight construction • Semi-rigid is built tough to help protect your
Cat. No. 60177
• 60177
Description Breakaway Lanyard for Safety Glasses
Color Black
• •
eyewear from drops, bumps and impacts High quality, premium soft interior to ensure safety eyewear does not get scratched Designed to hold any model of Klein Tools safety eyewear Easy and convenient to switch out models worry-free
Cat. No. 60176
60176
Description Safety Glasses Hard Case
Conduit Tools and Measurement
ensures quick release in case of an emergency TOUGH: Synthetic braided fiber design adds strength and long term durability COMFORT: Built with soft and low profile materials CONVENIENCE: Easily adjustable loops allow you to attach to a wide variety of eyewear
Drivers and Wrenches
• • •
Strippers, Cutters, and Crimpers
Breakaway Lanyard for Safety Glasses SECURITY: Lanyard with snap design • and breakaway force of 3-Pound
Color Black
Tool Kits
Respiration P100 Half Mask Respirators Light and ultra-compact respirators efficiently and effectively provide the wearer with P100 particulate protection without compromising comfort and wearability. P100 Filters are replaceable.
Safety, PPE and Comfort
• NIOSH approved P100 (TC-84A-6949) • Non-metal, latex and silicone-free lightweight TPE face piece • Compatible with other PPE safety products including visors and welding helmets • Ergonomic design provides maximum visibility to wearers filters-high efficiency particulate air filters offer hydro-phobic (water repellent) material and offer • HEPA users the maximum particulate protection, greater than 99.97% • Low profile filters provide unobstructed field of vision, and are replaceable (Cat. No. 60245) Approved
60245
HIGH-EFFICIENCY PARTICULATE AIRFILTER
Description
Standards
60244
P100 Half-Mask Respirator, Medium-Large
NIOSH Approved P100 (TC-84A-6949)
60246
P100 Half-Mask Respirator, Small-Medium
Material
Size
Reusable
TPE (Thermo Plastic Elastomer)
Medium/Large
NIOSH Approved P100 (TC-84A-6949)
Reusable
TPE (Thermo Plastic Elastomer)
Small/Medium
NIOSH Approved P100 (TC-84A-6949)
Replaceable
Voice/Data/Video
Replacement 60245 P100 Half-Mask Respirator Replacement Filter
Replaceable/Reusable
Tool Storage
Cat. No.
HEPA
Jobsite Accessories
NIOSH
60244
The P100 filter is part of the approved assembly and only when the above items are used together is the device approved for occupational applications. NOT FOR USE in atmospheres immediately dangerous to life or health.
Reusable Face Mask With Replaceable Filters
Cat. No. 60442 60443
Description Reusable Face Mask Replacement Filters for Reusable Face Mask (3-pk)
60442
Power Tools and Accessories
Washable masks provide protection against non-toxic dust, pollen, mold, dander, • and common airborne irritants Adjustable neck and head straps for optimal fit • Breathing vents and nose clip help prevent glasses from fogging • Replaceable Filters (60443) also sold separately • Mask includes one filter and storage bag •
Test and Measurement
Basic protection against non-harmful common airborne irritants
60443
Color Black Black
www.kleintools.com > 800-553-4676
159
Lifting, Pulling, and Structural
NOT NIOSH approved. To ensure safe operations read and follow instructions.
WORK WEAR
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
High-Visibility Safety Vest • Meets ANSI/ISEA 107-2015, Type R, Class 2 requirements • Zipper closure in front for secure fit and breathable mesh fabric on back • 2" retro-reflective stripes enhance visibility interior pockets, four exterior pockets with hook and loop closure, • 2andlarge exterior tab to attach radio clip or other items Cat. No. 60269 60268
Chest Size Medium/Large: 38" to 44" (96.5 to 111.8 cm) Extra-Large: 44" to 50" (111.8 to 127 cm)
Color
Number of Pockets
Material
8
100% Polyester
High-Visibility Yellow
60269
High-Visibility Winter Bomber Jacket • Wind and water resistant with 220-Gram insulation for superior warmth • ANSI rated Type R, Class 3 with 2-Inch reflective stripes • Attached inset hood and zippered underarm vents Cat. No. 60364 60380 60501
Chest Size Large: 38" to 44" (96.5 to 111.8 cm) X-Large: 44" to 50" (111.8 to 127 cm) XX-Large: 50" to 56" (127 to 142.2 cm)
60364
Color
Number of Pockets
Material
High-Visibility Yellow
10
100% Polyester
Warming Gear under hard hats • Wear or alone • Machine washable • One size fits most
60391
60388
5 60413 Cat. No. 60413 60132 60388 60391 60383 60455 60466
160
60466
60132 Description Heat Exchanger Balaclava Wind Proof Hinged Balaclava Heavy Knit Hat Knit Beanie Winter Helmet Liner Neck and Face Warming Band Neck and Face Warming Half-Band
Color Black Black Black Black Black Black Black
www.kleintools.com > 800-553-4676
Package Quantity 1 1 1 1 1 1 1
Special Feature Removable heat exchanger, high-visibility yellow piping One-piece with hinge allows for use as a neck gaiter Extra warmth with heavy knit; vintage Klein Tools logo Fleece lining; high-visibility yellow trim Polar fleece on crown; windproof fabric around ears Double layered; fleece inside, anti-odor outside Double layered; anti-odor fabric top, fleece bottom
Size One Size Fits Most One Size Fits Most One Size Fits Most One Size Fits Most One Size Fits Most One Size Fits Most One Size Fits Most
Overall Length 17" (43.2 cm) 17.5" (44.5 cm) 10'' (25.4 cm) 10'' (25.4 cm) 11" (27.9 cm) 20" (50.8 cm) 12" (30.5 cm)
Pliers
Work Wear
Strippers, Cutters, and Crimpers
Performance Thermal Socks • Merino Wool Socks reduce odor and wick-away moisture • Cushioned foot bed and arch support for all day comfort • Made in the USA
Shoe Size Large: Men's Shoe Size 7 to 11 X-Large: Men's Shoe Size 11.5 to 14
Package Quantity
Material
1-Pair
51% Merino Wool, 41% Nylon, 6% Polyester, 2% Lycra Spandex
Drivers and Wrenches
Cat. No. 60508 60509
60508
Overall Length 16.5" (41.9 cm) 17.5" (44.5 cm)
Conduit Tools and Measurement Tool Kits
Cooling Gear with water and • Activate stays cool for hours under hard hats • Wear or alone Machine washable • and reusable 60093
60090
60486
60230
Safety, PPE and Comfort
Color Gray Blue Blue High-Visibility Yellow Blue High-Visibility Yellow Blue Black
Package Quantity 1 1 2 2 1 1 2 1
Special Feature Comes in storage tube Comes in storage tube Comes in resealable bag with carabiner Comes in resealable bag with carabiner Anti-odor and UPF 50+ sun protection Anti-odor and UPF 50+ sun protection Elastic headband with absorbent terry cloth Breathable mesh fabric at crown
Size 13" x 29.5" (33 x 74.9 cm) 13" x 29.5" (33 x 74.9 cm) 13" x 29.5" (33 x 74.9 cm) 13" x 29.5" (33 x 74.9 cm) One Size Fits Most One Size Fits Most One Size Fits Most One Size Fits Most
Voice/Data/Video
Description Cooling PVA Towel Cooling PVA Towel Cooling PVA Towel Cooling PVA Towel Neck and Face Cooling Band Neck and Face Cooling Band Cooling Do Rag Cooling Helmet Liner
60181
Tool Storage
Cat. No. 60093 60090 60230 60486 60439 60465 60180 60181
60180
Jobsite Accessories
465
Test and Measurement
Shoe Covers
55487 55488 55489
Black Black Black
Medium: Men's Boot 7-10; Wmn's Boot 8.5-10.5 Large: Men's Boot 10.5-13 or Wmn's Boot 11 and Up Extra Large: Fits Men's Boot 13.5-17
Power Tools and Accessories
• • • • •
High quality, durable nylon construction Water resistant High traction, slip resistant soles (exceeds 0.5 COF per ASTM D1894) Reusable; 6-9 month average lifespan with daily use Machine wash cold, air dry Cat. No. Color Size
Package Quantity 1 Pair 1 Pair 1 Pair
55487
161
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
GLOVES
Pliers
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Safety, PPE and Comfort Jobsite Accessories
Touch-Screen Work Gloves with Cut-Level Resistance • Touchscreen-capable fingertips keep you connected on the jobsite • Nitrile dip technology for superior grip • Thumb reinforcement for extra protection • Seamless knit cuff for comfortable fit • Machine washable 60185
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
60186 Cat. No. 60185 60197 60186 60198
Cut-Level Standard
Color
2
ANSI A2 Cut Resistance; EN 388: 2015 4342 B
Gray Knit, Black Coating, Orange Cuff Thread
4
ANSI/ISEA 105-2016 Cut Level A4; EN 388: 2015 4442 D
High-Visibility Yellow Knit, Black Coating, Orange Cuff Thread
Size Large (9) Extra-Large (10) Large (9) Extra-Large (10)
Package Quantity 2-Pair 2-Pair
Thermal Dipped Gloves gloves are double dipped and terry lined for protection and • Winter warmth in cold weather • Coated with latex shell for water resistance • Second coating of textured latex on palm and fingers for superior grip • Thick lining of 7-Gram brushed acrylic to retain warmth • Tear and abrasion resistant while still maintaining flexibility for great dexterity • Ribbed-knit cuff for secure fit • Machine washable 60389 Cat. No. 60389 60390
162
Standard EN388-2016 2131X; EN511:2006 X1X EN388-2016 2131X; EN511:2006 X1X
www.kleintools.com > 800-553-4676
Color Gray Knit, Black Coating, Orange Trimmed Cuff Gray Knit, Black Coating, Black Trimmed Cuff
60390 Size Large (9) Extra-Large (10)
Package Quantity 1-Pair
Pliers
Gloves
Strippers, Cutters, and Crimpers
Wire Pulling Gloves
• Great gripping ability • Slim fit for better dexterity • Touchscreen capability on index finger • Neoprene wrist closure for comfort
Drivers and Wrenches
Cat. No. 40232 40233 40234
Size Medium Large Extra Large 40233
Conduit Tools and Measurement
Leather Gloves
Size Medium Large Extra-Large 40220
Trek Dry™ is a trademark of Mechanix Wear, Inc.
Jobsite Accessories
Utility Gloves
Tool Storage
wicking and breathable TrekDry™ stretch material on top with sponge • Moisture foam and tricot lining for maximum comfort • Durable synthetic leather palm • Reinforced thumb and finger panels add protection and durability • Wide opening elastic cuff for easy entry • Machine washable Size Medium Large Extra-Large
TrekDry™ is a trademark of Mechanix Wear, Inc.
40206
Test and Measurement
Leather Utility Gloves
Power Tools and Accessories
• Durable and comfortable • Open cuff for quick on/off • DuraHide™ palm and leather first fingers for durability • Stretch back for extra comfort and flexibility Cat. No. 40226 40227 40228
Voice/Data/Video
Cat. No. 40205 40206 40207
Safety, PPE and Comfort
Cat. No. 40220 40221 40222
Tool Kits
• • • • • •
Genuine professional grade leather offers the finest in protection and comfort Flexible yet impact absorbing thermo plastic rubber (TPR) protects the fingers and back of the hand Reinforced palm with 2mm EVA foam padding for impact protection Moisture wicking and breathable TrekDry™ stretch material on top with sponge foam and tricot lining for maximum comfort Machine wash and dry Neoprene cuff and soft molded rubber closure with hook and loop secures fit
Size Medium Large Extra Large
DuraHide™ is a trademark of Mechanix Wear, Inc.
40227
163
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers
Gloves “Extreme” Gloves yet impact absorbing thermo plastic rubber (TPR) and EVA foam protects the fingers, • Flexible knuckles and back of the hand • D30 padding material in the palm to absorb impact and vibration • Palm and thumb reinforced with synthetic leather for extra durability • Breathable two-way stretch materials on top with sponge foam and tricot lining for maximum comfort • Rubberized fingertips for extra grip • Wrist closure with hook and loop secures fit
Conduit Tools and Measurement
Drivers and Wrenches
®
Cat. No. 40217 40218 40219
Size Medium Large Extra-Large
40218
D30® is a registered trademark of Design Blue Limited.
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
“Grip” Gloves Armortex rubberized grip on the fingers with reinforced synthetic leather palms and thumb for • ample grip in both wet and dry conditions • D30 padding material in the palm to absorb impact and vibration wicking and breathable TrekDry™ stretch material on top with sponge foam and tricot • Moisture lining for maximum comfort • Machine washable • Flexible yet impact absorbing thermo plastic rubber (TPR) protects the fingers and back of the hand • Neoprene cuff and soft molded rubber closure with hook and loop secures fit ®
®
Cat. No. 40214 40215 40216
Size Medium Large Extra-Large
Trek Dry™ is a trademark of Mechanix Wear, Inc.; D30® is a registered trademark of Design Blue Limited; Armortex® is a registered trademark of Nam Liong Enterprise Co. Ltd.
40215
High Dexterity Touchscreen Gloves
• • •
Touchscreen capability on entire palm, all fingers, first knuckles Slim fit for extra dexterity Comfortable glove for light duty tasks
Cat. No. 40229 40230 40231
Size Medium Large Extra Large
40230
Camouflage Gloves
• Mossy Oak Break-Up Infinity™ pattern wicking and breathable TrekDry™ stretch material on top with sponge foam and • Moisture tricot lining for maximum comfort • Reinforced thumb and finger panels add protection and durability • Single layer, seamless palm made of durable synthetic leather for improved fit and dexterity • Soft molded rubber closure with hook and loop secures fit ®
Cat. No. 40208 40209 40210
Size Medium Large Extra-Large
Trek Dry™ is a trademark of Mechanix Wear, Inc.; Mossy Oak® is registered trademark of Haas Outdoors Inc.
164
www.kleintools.com > 800-553-4676
40209
Pliers
Gloves
Strippers, Cutters, and Crimpers
“Cold Weather Pro” Gloves
Size Medium Large Extra-Large
40212
Thinsulate™ is trademark of 3M.
Safety, PPE and Comfort
Size Large Extra-Large
40072
Size Fits Most Hand Sizes 40002
Power Tools and Accessories
Cat. No. 60188 60189
Test and Measurement
Leather Work Gloves • Genuine professional-grade goatskin leather • Knuckle and finger protection with PVC guards • Mesh back for breathability and ergonomic shape for dexterity • EVA foam padding on palms for extra comfort • Hook and loop closure on cuff strap provides snug fit
Voice/Data/Video
Cat. No. 40002
Tool Storage
Heavyweight Jersey Gloves • Soft, comfortable, general-purpose gloves • Made of 100% cotton jersey • Knit wrist • Dark-brown color
Jobsite Accessories
Cat. No. 40072 40074
Tool Kits
Electrician’s Gloves • Durable construction allows flexibility • Features slip resistant construction • Spandex material is breathable and comfortable to wear all day • Constructed with a reinforced area at the base of the thumb • Elastic cuff for secure and comfortable fit • Index fingers are wrapped with slip-resistant material • Extended cuff for easy on/off
Conduit Tools and Measurement
Cat. No. 40211 40212 40213
Drivers and Wrenches
• Palm and fingers lined with Thinsulate™ C40 with fingertip designed for improved dexterity • Water resistant nylon back lined with Thinsulate™ C100 rubberized palm provides water resistance and grip with • Durable 2mm EVA foam padding for impact protection • 5mm EVA foam knuckle for impact protection and comfort • Neoprene thumb and cuff for comfort and water resistance • Molded rubber closure with hook and loop secures fit
Size Large Extra-Large
www.kleintools.com > 800-553-4676
165
Lifting, Pulling, and Structural
60188
Pliers
40022
Cowhide Work Gloves • Premium cowhide, soft and form-fitting for maximum comfort • Gunn cut with seams away from wear surfaces • Inseam index finger • Shirred-elastic wrist back • Natural light-tan color Cat. No. 40021 40022 40023
40014
Cowhide Driver’s Gloves • thumb - unique design allows leather to conform to your thumb • Easy-action and hand (Cat. Nos. 40003, 40004, 40006 and 40007) • Gunn cut with seams away from wear surfaces • Lap-seam index finger and shirred-elastic wrist back • Gray color
Size Medium Large Extra-Large
Cat. No. 40003 40004 40006 40007
Thinsulate™ Lining
40016 40017 40018
Medium Large Extra-Large
Size Small Medium Large Extra Large
Thinsulate™ Lining
40014 40015
Thinsulate™ is a registered trademark of 3M
Large Extra-Large
*
*
Thinsulate™ is a registered trademark of 3M
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Gloves
40008 40080
Lineman Work Gloves • • Soft grain leather construction with reinforced leather patches • Double-row padded knuckle for durability • Black spandex back with Klein Lineman logo patch Cat. No. 40080 40082 40084 40086
166
Size Medium Large Extra-Large Extra Extra-Large
www.kleintools.com > 800-553-4676
40010
Medium and Long-Cuff Gloves • Leather fingers, palm, pull, and knuckle strap (Cat. Nos. 40010 and 40012) • Gunn cut with seams away from wear surfaces • Wing thumb, seamless index finger, elastic wrist-back strap • Lined palm and fingers • Rubberized, waterproof, bell gauntlet cuff Cat. No. 40008 40010 40012
Size Large Large Extra-Large
Cuff Size 2.5" (6.4 cm) 4.75" (12.1 cm) 5.25" (13.3 cm)
Material Heavy sueded leather Soft, flexible, top-grain cowhide leather Soft, flexible, top-grain cowhide leather
Strippers, Cutters, and Crimpers
SUPPORTS
Pliers
Drivers and Wrenches Conduit Tools and Measurement
Lightweight Gel Knee Pads
Overall Length 6" (15.2 cm)
Overall Height 12" (30.5 cm)
Overall Width 6" (15.2 cm)
Safety, PPE and Comfort
Cat. No. 60184
Tool Kits
• Slip resistant rubber caps to grip kneeling surface for enhanced stability and balance • Designed to disperse pressure and reduce fatigue while providing lightweight comfort and protection • Cinch-tight straps provide comfortable, snug fit • Knee pads are sold in pairs 60184
Overall Length 10.7" (27.3 cm)
Overall Height 3.5" (8.9 cm)
Tool Storage
Cat. No. 60344
Jobsite Accessories
Hinged Gel Knee Pads with a top strap positioned above the knee to reduce shifting and to keep • Designed the knee pad centered multi-layer pressure absorbing gel padding system provides heavy duty • Lightweight knee support for all-day comfort slip-resistant rounded synthetic rubber kneecaps grip work surfaces for • Durable ultimate stability while allowing side-to-side mobility elastic straps allow you to dial in a custom fit and quick-release clips • Adjustable secure upper and lower straps for easy on/off • Breathable mesh and neoprene lining to keep you cool • Knee pads are sold in pairs Overall Width 9.8" (24.9 cm)
60344
Voice/Data/Video
Kneeling Pads
60135 60136
Material
Color
Tradesman Pro™ Standard Kneeling Pad NBR Foam Tradesman Pro™ Large Kneeling Pad NBR Foam
Black Black
Overall Length 21" (53.3 cm) 28" (71.1 cm)
Overall Width 1" (2.5 cm) 1" (2.5 cm)
60136
Overall Height 14" (35.6 cm) 16" (40.6 cm)
167
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Cat. No. Description
60135
Test and Measurement
• • • • • • • • •
1" (25.4 mm) thick, resilient NBR foam protects your knees Kneeling pad won’t stay compressed, it bounces back to original form Chamfered safety edge with orange stripes provides visual and tactile awareness of edge (Cat. No. 60136) Large size allows you to move without moving the pad each time Built-in handle allows convenient transport or hanging Closed-cell foam is resistant to petroleum and is silicone-free Use kneeling or standing; great for anti-fatigue Water repellent Indoor or outdoor use; hand washable
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort
Lockouts with Interlocking Tabs Specifically designed for locking out power sources • such as disconnects, switches, and panel boxes Double hasp of tempered steel with • patentedinterlocking interlocking tabs for extra security • Hasps are bright zinc-plated • Riveted construction • Six-hole locking bodies coated with red vinyl plastic • Holes will accept up to 5/16" (8 mm) diameter shackles WARNING: Use only in accordance with OSHA requirements.
Klein Kleaners™ Hand Cleaning Towels • Simple and convenient • Pre-moistened towels • No rinsing - no drying - no residue • Powerful, yet gentle, pumice-like cleaning action • Quickly loosens, dissolves, and absorbs dirt and grease a natural citrus solvent that’s gentler • Features than petroleum-based hand cleaners • Made in USA 45201 51425
Cat. No. 45200 45201
Closed Hasp I.D. 1" (2.5 cm) 1.5" (3.8 cm)
Cat. No. 51425
Towel Size 9" x 12" (22.9 x 30.5 cm)
Package Quantity 72
Barricade and Warning Tapes • Bold, black lettering on bright, long-lasting color backgrounds • Yellow background for CAUTION tape • Red background for CAUTION - BURIED ELECTRIC LINE Tape • Made of tough, durable (2.5 mil) polyethylene • Highly resistant to acids, alkalis, and other soil components • Tapes are 3" (7.6 cm) wide, and are available in either 200' (61 m) or 1000' (305 m) rolls • Made in USA Cat. No. 58000 58001 58002 58003
Legend CAUTION CAUTION CAUTION-BURIED ELECTRIC LINE CAUTION-BURIED ELECTRIC LINE
Color Black on Bright Yellow Black on Bright Yellow Black on Bright Red Black on Bright Red
Overall Length 200' (61 m) 1000' (305 m) 200' (61 m) 1000' (305 m)
Overall Width 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm)
58000
Tool Storage
Jobsite Accessories
Safety Products
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Tether • • Triple-locking carabiner for additional security TT2
WHY IS IT IMPORTANT? In 2016, the Bureau of Labor Statistics reported there were 255 fatalities and 47,920 reported injuries from dropped objects in the United States, making it the third leading cause of injuries on the jobsite, according to OSHA. Compared to 2015, deaths from dropped objects were up approximately 3.24%, and injuries increased by 6.85%.
• • • •
WARNINGS: Inspect for wear before each use. Do not use for human support. Never connect over 5 lbs. (2.3 kg) to a person. Do not use around moving or rotating equipment.
168
WARNINGS: • Tethers extend to anywhere from 3.5' to 5' (1.3 m to 1.5 m). Rig to avoid contact with objects below. • Always ensure cinch remains snug while in use. • Always attach carabiner end to anchor point. • Do not attach tether back onto itself. • Do not tie knots in tether.
www.kleintools.com > 800-553-4676
Cat. No. TT1 TT2
Load Rating 10 lb (4.5 kg) 15.0 lb (6.8 kg)
Relaxed Length 32" (81.3 cm) 32" (81.3 cm)
Stretched Length 60" (152.4 cm) 51" (129.5 cm)
Pliers
Jobsite > Jobsite Accessories
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage
JOBSITE ACCESSORIES
Illumination/Flashlights
We understand the heavy demands of the professional on the jobsite. Klein has developed accessories with the strength to match the jobsite demands and make the professional’s day less stressful.
Bluetooth® Jobsite Speakers
Coolers
Test and Measurement
Rechargeable Jobsite Fan
Voice/Data/Video
Magnetic Wristband
Mobile Phone Accessories
Power Tools and Accessories
Batteries and Power
Lifting, Pulling, and Structural
169
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
ILLUMINATION
Voice/Data/Video
Pliers
Illumination
175
9h 6 ft
16h
IP54
Rechargeable Personal Worklight 460 lumens for 9 hour runtime; • High: Low: 175 lumens for 16 hour runtime • Able to charge smartphones and other small devices via USB-A • Infinite light direction; head rotates 360° while the kickstand rotates 270° features strong magnets for mounting, three nail notches, • Kickstand and a built-in carabiner for easy hanging • Battery gauge indicates battery life in 25% increments • Rechargeable via Micro-USB cable (included) • Easy to find glow locator recharges when lit • Durable light has a 6' (1.8 m) drop test rating and is IP54 water and dust resistant
Drivers and Wrenches
460
Strippers, Cutters, and Crimpers
FL 1 STANDARD
FL 1 STANDARD
125
6h 10 ft
12h
Dimensions Batteries 2.07 " L x 1.67" W (5.3 cm x 4.2 cm) Li-Ion 18650
Drop Protection 6' (1.8 m)
Rechargeable Focus Flashlight with Laser 350 lumens for 6 hour runtime; • High: Low: 125 lumens for 12 hour runtime • Twist focus bezel concentrates the light beam where it’s needed • Class IIIa red laser pinpoints out-of-reach objects • Strong magnetic end cap for hands-free use • Battery gauge notifies when the battery is low • Rechargeable via Micro-USB cable (included) light has a 10' (3 m) drop test rating and • Durable is IP54 water and dust resistant
Jobsite Accessories
IP54
Charges smartphones or other small USB-A devises
Cat. No. 56403
Safety, PPE and Comfort
350
56403
Tool Kits
Or hang it from conduit
Conduit Tools and Measurement
Attaches to magnetic surface
56040
Drop Protection 10' (3 m)
Alkaline LED Flashlight with Worklight 235 lumens for 6 hour runtime; • Flashlight: Worklight: 100 lumens for 12 hour runtime • Bright, focused flashlight and broadcasting work light in one tool • Strong magnet for secure, hands-free illumination • Glow ring tip charges while the light is on and allows for easy retrieval in the dark • Durable; IP67 waterproof and dust proof with 10' (3 m) drop rating • Aluminum body with cushion-grip handle • Pocket clip for easy, convenient access Charges when light is on • 3x AAA batteries included Works with Klein Backpack 55482 and 55655 •
Batteries 3x AAA
Drop Protection 10' (3 m)
Glows when light turned off
Power Tools and Accessories
Dimensions 4.79" L x 1.29" W (12.2 x 3.3 cm)
56028
Test and Measurement
Cat. No. 56028
Batteries Lithium-ion 18650
Voice/Data/Video
FL 1 STANDARD
Magnetic, hands-free
Dimensions 5.98" L x .96" W (15.2 x 2.4 cm)
Tool Storage
Laser pinpoints out-of-reach objects
Cat. No. 56040
Magnetic end for hands-free illumination
171
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers
Illumination FL 1 STANDARD
70
6h
10 ft
Conduit Tools and Measurement
Drivers and Wrenches
IP54
Alkaline Inspection Penlight with Laser • 70 lumens for 6 hours runtime • LED penlight for up-close lighting in dim areas pointer aids in pinpointing objects in • Laser out-of-reach locations Glow ring tip charges while the light is on and • allows for easy retrieval in the dark • 10' (3 m) drop rating • Pocket clip for easy, convenient access • Aluminum body with knurled handle • 2x AAA batteries included
56026
Tool Kits
Charges when light is on
Safety, PPE and Comfort
Glows when light turned off Cat. No. 56026
Dimensions 6"L x .8" W (15.2 x 2 cm)
High
275
Med
100
Eco
12
Strobe
15
Power Tools and Accessories Lifting, Pulling, and Structural
3hr
Batteries 2x AAA
Drop Protection 10' (3 m)
Rechargeable Waterproof Pocket Flashlight pocket flashlight features a • Rechargeable durable 10-Foot drop rating and is both waterproof and dustproof
5hr
12hr
47hr
10 ft
IP67
light has four modes: • Compact High at 275 lumens, Medium at 100 lumens,
• • • • •
and all-day Eco setting and Strobe Flashlight comes with a removable lanyard to keep the light close by Versatile dual-direction pocket clip secures the light in a pocket or to the bill of a cap for hands-free use Equipped with Last Mode Memory so the light turns on in the same mode it was turned off Tri-color LED light indicates battery life Slide the collar down for recharging via the included USB-C cable
56411
Dual-direction pocket clip
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
FL 1 STANDARD
Laser pointer helps pinpoint objects
Cat. No. 56411
172
Dimensions 4.27" L x .75" W (10.9 x 1.2 cm)
www.kleintools.com > 800-553-4676
Batteries Lithium-Ion
Drop Protection 10' (3 m)
Durable, waterproof and dustproof light
Pliers
Illumination
High
500
Low
FLASHLIGHT
315
7hr
High Med
235
Eco
35
10hr
11hr
30hr
6 ft
• • • • • •
three Work Light modes: High-375 lumens for 10 hours, Medium- 235 lumens for 11 hours, and ECO- 35 lumens for 30 hours Magnetic end cap and side-barrel LEDs for a hands-free work light Durable flashlight rated for a 6' (1.8 m) drop and is IP66 water-resistant and dustproof Removable low-carry pocket clip keeps the light accessible and out-of-the way Equipped with Last Mode Memory so the light turns on in the same mode it was turned off Tri-color LED light indicates the battery life and the charging collar twists for recharging via an included USB-C cable Glow ring locator on the bezel charges when the flashlight is on
56412
Conduit Tools and Measurement
375
Rechargeable LED Flashlight with Worklight Flashlight with integrated work light is a compact, • Rechargeable powerful every day light offering 5 different light modes Features two Flashlight modes: • High 500 lumens for 7 hours, Low 315 lumens for 10 hours;
Drivers and Wrenches
10hr
WORKLIGHT
Strippers, Cutters, and Crimpers
FL 1 STANDARD
IP66 Dimensions 5.5" L x 1.4" W (14 cm x 3.6 cm)
7hr
bright white LEDs in 2 settings: • Features Spotlight (Boost: 1000 lm for 4 hrs, High: 800 lm for 7 hrs,
Boost High Low Strobe
•
50hr
• • • •
High
650
Med
450
Eco
Floodlight
35
6hr
11hr
Voice/Data/Video
11hr
Low-400 lm for 11 hrs, Strobe: 95 lm for 50 hrs) and Floodlight (High-650 lm for 6 hrs, Medium: 450 lm for 11 hrs, ECO: 35 lm for 25 hrs) Low intensity red LEDs for non-blinding night vision (4 lumens for 48 hours) also feature a long-lasting red strobe (4 lumens for 96 hours) Durable flashlight is IP64 dustproof and water-resistant and features a magnetic end cap for a hands-free work light Easy to carry light comes with both a holster to be secured on a belt or backpack and removable low-carry pocket clip Tri-color light indicates the amount of battery life and the charging collar twists for recharging via included USB-C cable Equipped with Last Mode Memory so the light turns on in the same mode it was turned off
Tool Storage
95
white floodlight, and low-intensity red LEDs
Jobsite Accessories
400
Safety, PPE and Comfort
4hr
Spotlight
800
Drop Protection 6' (1.8 m)
Rechargeable 2-Color LED Flashlight with Holster Flashlight is 3 lights in 1: • Rechargeable a focused, long-range white spotlight, wide,
FL 1 STANDARD
1000
Batteries Lithium-Ion
Tool Kits
Cat. No. 56412
25hr
4
48hr
96hr
Power Tools and Accessories
Strobe Solid
4
Test and Measurement
Red LED
56413
6 ft
IP64 Cat. No. 56413
Dimensions 6.3" L x 1.3" W (16 x 3.3 cm)
Batteries Lithium-Ion
Drop Protection 6' (1.8 m)
173
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers
FL 1 STANDARD
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Illumination Telescoping Magnetic LED Pickup Tool • 25 lumens for 10 hour runtime extension 24" (610 mm) beyond arm's reach to • Telescoping retrieve magnetically-attractive tools and parts • Powerful magnetic head with 2 lb (907 g) pickup strength light provides long-lasting illumination to • LED guide you to and from your target mm) gooseneck end bends to aid with pickup and • 3"to (75 work around obstacles • Pocket clip for easy, convenient storage • Powered by 2 x AAA alkaline batteries (included)
Tool Kits
Easily locate and retrieve tools in tight spaces
Cat. No. 56027
Power Tools and Accessories Lifting, Pulling, and Structural
Dimensions 6.31" x .938" W (16 x 2.4 cm) CLOSED 27.81" x .938" W (70.6 x 2.4 cm) OPEN
FL 1 STANDARD
125
40
4h 10 ft
8h IP54
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
56027
Cat. No. 56402
174
Lumens 25
Battery Life 10 hours
Batteries 2x AAA
Drop Protection 10' (3 m)
Cap Visor LED Light 125 lumens for 4 hour runtime; • High: Low: 40 lumens on for 8 hour runtime metal clip on this cap light fastens easily • Contoured onto the hat brim or visor • Five bright LEDs flood the area with light • Pivoting light head allows up to a 60° lighting angle centered power button controls the light • Conveniently from high to low to off • Durable headlamp with a drop-test rating of 10' (3m) • IP54: dust and water resistant • 2x AAA batteries included
Dimensions 2.57" L x 2.27" W (6.5 cm x 5.8 cm)
Lumens High: 125, Low: 40
www.kleintools.com > 800-553-4676
Battery Life High: 4 hours, Low: 8 hours
56402
Batteries 2x AAA
Drop Protection 10' (3 m)
Provides hands-free illumination
Pliers
Illumination
400 4h 200
Rechargeable Auto-Off Headlamp with Silicone Strap Light: 400 lumens for 4 hours runtime • Boost Spotlight: 200 lumens for 12 hours runtime
12h 22h
6 ft
Floodlight: 100 lumens for 22 hours runtime bright light, auto-sensing technology turns • Inheadlamp off after 3 minutes to save battery Light can be easily removed from bracket for recharging or to attach • directly to Klein Hard Hats Battery gauge indicates level of battery life with colored LED lights • Slim profile with pivoting mount to allow up to a 64° lighting angle • Adjustable silicone strap secures headlamp onto head, hard hat or cap • Rechargeable via micro-USB port (cable included) •
Drivers and Wrenches
100
Strippers, Cutters, and Crimpers
FL 1 STANDARD
®
IP54
Conduit Tools and Measurement
64˚ pivoting
56064
Easily remove from bracket for recharging
Tool Kits
Battery gauge indicator
Safety, PPE and Comfort
Easily mounts to Klein hard hats without strap
Lumens Boost: 400/ Spot: 200/ Flood: 100
FL 1 STANDARD
4h 200
Battery Life Boost: 4 hours/ Spot: 12 hours/ Flood: 22 hours
Drop Protection 6' (1.8 m)
Rechargeable 400 Lumen Auto-Off Headlamp with Fabric Strap •
Tool Storage
400
Batteries Rechargeable Internal, Li-Ion, 3.7V / 1700 mAh
Jobsite Accessories
Cat. No. 56064
12h 22h
•
Voice/Data/Video
100
56048
6 ft IP54
Description
Lumens
Batteries
Battery Life
Rechargeable 400 Lumen Headlamp with Fabric Strap
Boost: 400 Spot/High: 200 Flood/Low: 100
Lithium-Ion Rechargeable via micro-USB port
Boost: 4 hrs. Spot/High: 12 hrs. Flood/Low: 22 hrs.
Power Tools and Accessories
56048
Test and Measurement
Cat. No.
• • • • •
175
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers
FL 1 STANDARD
Alkaline Headlamp with Silicone Strap Light: 150 Lumens, 6 hour runtime; • Spot Flood Light: 50 Lumens, 10 hour runtime • 3x AAA batteries included silicone strap keeps headlamp securely • Anti-slip fastened to hard hat • Strap comes pre-adjusted for quick fit to hard hat tilt for varied beam direction to point light • 45° where it is needed most
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Illumination
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
56220
Cat. No. 56220
Lumens Spotlight: 150; Floodlight: 50
FL 1 STANDARD 260 125
IP54
Battery Life Spotlight: 6 hours; Floodlight: 10 hours
• Flood/Low: 125 lumens – 14 hours array offers a rectangular, more usable light field than • aLight typical round LED fabric strap with silicone grip is equipped with a marker • Adjustable and carpenter’s pencil holder (marker and pencil not included) • Rear-side magnet for mounting and use as a work light • Battery gauge LED indicator also attaches directly to Klein Hard Hats • Headlamp (equipped with bracket system) • Slimmer profile light pivots up to a 64o lighting angle • Rechargeable via USB-C cable (included) ®
Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Drop Protection 6' (1.8 m)
Rechargeable Light Array LED Headlamp with Fabric Strap modes: • Headlamp • Spot/High: 260 lumens – 9 hours
14h 6 ft
Voice/Data/Video
Tool Storage
9h
Batteries 3x AAA
56049
Cat. No. 56049
176
Description
Lumens
Batteries
Battery Life
Rechargeable Light Array Headlamp with Fabric Strap
Spot/High: 260 Flood/Low: 125
Lithium-Ion Rechargeable via USB-C port
Spot/High: 9 hrs. Flood/Low: 14 hrs.
www.kleintools.com > 800-553-4676
Pliers
Illumination
300 4h 215
Strippers, Cutters, and Crimpers
FL 1 STANDARD
Rechargeable Hard Hat Headlamp and Worklight •
9h 14h 6 ft IP54
• • • • • •
Drivers and Wrenches
100
56062
Conduit Tools and Measurement Tool Kits
66ftft
IP54
56062
Description
Lumens
Rechargeable Hard Hat Boost: 300 Headlamp and Worklight Spot/High: 215 Flood/Low: 100
Batteries
Battery Life
Lithium-Ion Rechargeable via USB-C port
Boost: 4 hrs. Spot/High: 9 hrs. Flood/Low: 14 hrs.
Safety, PPE and Comfort
Cat. No.
Jobsite Accessories
Rechargeable 2-Color LED Headlamp modes: • Headlamp • Boost at 800 lumens for 4 hours
Tool Storage
56414 FL 1 STANDARD
Rechargeable 2-Color LED Headlamp
Modes: Lumens, Runtime Spotlight: Boost: 800 lm, 4 hrs HIGH: 600 lm, 8 hrs Strobe: 100 lm, 40 hrs LOW: 300 lm, 10 hrs
Floodlight: 500 lm, 5 hrs 250 lm, 10 hrs 30 lm, 27 hrs
250
30
Red LED
5hr
10hr
27hr
Strobe Solid
High
40hr
Med
100
10hr
500
Eco
Boost High Low
300
8hr
2.5
2.5
Batteries
Includes
Li-Ion 3.7V, 2000 mAh
Rechargeable Lamp, Bracket, Fabric Strap, Pencil/Marker Holder, USB-C Charging Cord; Instruction Manual
56hr
Power Tools and Accessories
56414
Description
600
Floodlight
4hr
Test and Measurement
IP65
800
Strobe
Spotlight
10 6 ftft
Cat. No.
Voice/Data/Video
• • • • • •
• Spotlight at 600 lumens for 8 hours, 300 for 10 hours, and 100 lumen strobe for 40 hours • Floodlight at 500 lumens for 5 hours, 250 lumens for 10 hours, and 30 lumens for 27 hours • Low-intensity Red LEDS at 2.5 lumens for 56 hours, and 2.5 lumen strobe for 160 hours Low intensity red LEDs for non-blinding night vision as well as a long-la red strobe for easy visibility Battery gauge indicates level of battery life with colored LED lights Headlamp also attaches directly to Klein® Hard Hats (those equipped w bracket system) Slim profile with pivoting mount to allow up to a 64° lighting angle Adjustable silicone infused fabric strap with convenient marker and carpenter’s pencil holder Backside magnet allows for use as hands-free work light
160hr
177
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
• • • • • 56060
Cat. No. 56060
Tool Kits
Conduit Tools and Measurement
Illumination
Description Headlamp Bracket with Fabric Strap
Dimensions Circumference: 24.0” x 1.6” (61.0 x 4.1 cm)
Jobsite Accessories
Safety, PPE and Comfort
Clip Light 150 Lumens and 6 hour runtime, • High: Low: 50 Lumens and 10 hour runtime • Rugged, durable rubber overmold for safe and comfortable grip options: magnetized clip for mounting to magnetic • Hands-free surface or clip for shirt or pocket • Two modes: High/Low • Impact and water resistant • 3x AAA batteries included MAGNETIZED CLIP on back of light
Cat. No. 56221
6 ft
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
56221
Lumens High: 150, Low: 50
Batteries 3x AAA
Battery Life High: 6 hours / Low: 10 hours
Drop Protection 10' (3 m)
Dimensions 4.875" x 2.5" (12.4 x 6.4 cm)
Work Light • 50 Lumens for 5 hour runtime • Swivel hook and magnet for hands free use • 3x AAA batteries included • Works with: • 55431 Lighted Tool Bag • 55650 Tough Box 48-Quart Cooler • KTB5 Portable Power Station • 55473RTB Tool Master Rolling Tool Bag
55437
Cat. No. 55437
178
Lumens 50
Batteries 3x AAA
www.kleintools.com > 800-553-4676
Battery Life 5 hours
Drop Protection 6' (1.8 m)
Dimensions Diameter: 2.8" (7.1 cm)
COOLERS
Pliers
Strippers, Cutters, and Crimpers
TRADESMAN PRO
TM
Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Tradesman Pro™ Tough Box 17-Quart Cooler • Keeps cool up to 30 hours • Main compartment has a 17-qt (16.1 L), 18 can capacity up to 300 lb (136.1 kg); not only does this cooler carry lunch, it • Supports doubles as a handy place to sit storage compartment, lid opens full 180° to access and hold items like • Inside phone, medicine, keys, napkins, utensils, etc. Lid stays open at 90° to allow uninterrupted access; no rust stainless steel • hinged lid is recessed to accommodate 1 L water bottles • Shoulder strap holds lid in place while carrying and easily converts to a handle • Lock hasp fits #1 Master Lock or equivalent (not included)
90˚ Opening
Safety, PPE and Comfort
180˚ Opening
®
Jobsite Accessories
SUPPORTS UP TO 55600
Capacity 17 qt (16.1 L), 18 can
Number of Compartments 2
Overall Length 12" (30.5 cm)
Overall Height 12" (30.5 cm)
Tool Storage
Cat. No. 55600
Overall Width 16.203" (41.2 cm)
Master Lock® is a trademark of Master Lock Company
55601
Number of Compartments 4
Overall Length
Overall Height
Overall Width
9.5" (24.1 cm)
13" (33 cm)
12" (30.5 cm)
Cat. No. 55580
Description Tradesman Tumbler
Color Black/Orange
55580
Power Tools and Accessories
Cat. No.
Test and Measurement
• • •
55601
from getting crushed Mesh side pockets for extra items Front zipper pocket holds keys, napkins, medicine, etc. Shoulder strap and handle for easy carrying
Tradesman Tumbler Keeps liquid cold up to 12 hours and • hot up to 4 hours Designed with double wall vacuum • insulated stainless steel textured silicon outer sleeve • Rugged, for slip-resistance threaded lid design allows easy • Unique twisting with gloves on or off lid locks to form a spill• Flip-top resistant seal Rare-Earth magnetic lanyard • Removable secures tumbler to metal objects from stainless steel and other • Made BPA-free food grade materials
Voice/Data/Video
Tradesman Pro™ Soft Lunch Cooler • Stays cool for up to 12 hours • Double-thick, leak-resistant anti-microbial liner • 1680d ballistic weave for durability bottom protects against the • Fully-molded elements Separate upper "doghouse" • compartment keeps certain items
Size 20 oz (0.59 L)
179
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
ACCESSORIES
JOBSITE
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video
Cat. No. 55895
Overall Length 13.25" (33.7 cm)
Overall Width 0.75" (1.9 cm)
55895
Bluetooth® Jobsite Earbuds • Noise Reduction Rating (NRR) 28 dB • Seamlessly stream high-quality stereo audio Memory Foam tips provide hearing protection; • Interchangeable Silicone tips can be switched out for casual listening • Easy one-step pairing via trusted Bluetooth 5.0 up to 33 ft • 15-hour total run time (with charging case) • Built in microphones for hands-free calling • IP67 rated: dust- and water-proof (earbuds only) • Included USB-A to USB-C cable for convenient charging Cat. No. AESEB1
Earbuds Charging Case
Overall Length .84" (2.1 cm) 3.15" (8 cm)
Overall Height .96" (2.4 cm) 1.56" (4 cm)
Interchangeable Tips (Small/Medium/Large Size)
Overall Width .65" (1.7 cm) 1.5" (3.9 cm)
Lifting, Pulling, and Structural
AESEB1 Silicone Tips x3 sets
Memory Foam Tips x3 sets
Rechargeable Mid-Size Bluetooth® Jobsite Speaker with Magnet & Hook • Portable Bluetooth jobsite speaker offers powerful, crisp high-quality sound • 20 hours of playtime powered by 5200mAh rechargeable li-ion battery • Conveniently charge smartphones, tablets and other small devices • Versatile mounting options with embedded magnets for mounting and integrated hook for hanging • Daisy-chain feature allows pairing of two AEPJS3’s together within 30-feet of each other • Connects wirelessly via Bluetooth up to 100 feet or wired via auxiliary (3.5mm) cable speaker design features 2m (6.6ft) drop protection and is IP54 dust- and • Rugged water-resistant rated • Built-in microphone allows for hands-free calling via voice control ®
Power Tools and Accessories
Test and Measurement
Magnetic Wristband • Strong Rare-Earth magnets keep small parts close at hand • Breathable mesh interior for comfort • Made of durable 1680d ballistic material • Fits most wrist sizes • Securable adjustable hook and loop closure • Contoured for a comfortable fit around the wrist around your wrist, belt, or tool bag • Wrap and keep small parts easily within reach
AEPJS3
Connects to another AEPJS3 via daisy-chain Cat. No. AEPJS3
180
Overall Length 5.46" (13.9 cm)
Overall Height 5.39" (13.7 cm)
www.kleintools.com > 800-553-4676
Overall Width 2.34" (5.9 cm)
*Bluetooth® is a registered trademark of Bluetooth Special Interest Group (SIG).
Pliers
Speakers and Phone Holders
Strippers, Cutters, and Crimpers
Cat. No. AEPJS2
Overall Length 4.1" (10.4 cm)
Overall Height 4.2" (10.7 cm)
Drivers and Wrenches
Rechargeable Bluetooth® Speaker with Strap • Rechargeable wireless speaker offers crisp, clean sound and multiple mounting options • Connects wireless up to 32' (10 m) or via wired auxiliary input (aux cable included) • Integrated hang hole and versatile magnetic mounting strap • Hands-free built-in speakerphone • Rated IP54 dust- and water-resistant; 10' (3m) drop test • Includes 1/8" (3.5mm) auxiliary cable and USB-C -to-standard USB charging cable Overall Width 1.6" (4.0 cm)
AEPJS2
Conduit Tools and Measurement
Cat. No. AEPJS1
Overall Length 3.875" (9.8 cm)
Overall Height 3.5" (8.9 cm)
Tool Kits
Rechargeable Bluetooth® Jobsite Speaker • Connect wirelessly via Bluetooth or by a wired auxiliary cord • 32.8' (10 m) connectivity range (in open space) • Powerful rear magnet; twist-lock flange mounts to Klein’s Tool Bag (55431) • Rated IP45 waterproof/dustproof. 10-hour battery life • Includes 1/8" (3.5mm) stereo auxiliary cable and micro USB-to-standard USB charging cable Overall Width 2.125" (5.4 cm)
AEPJS1
Safety, PPE and Comfort
Cat. No.
Mounting Type
Color
Rechargeable Personal Jobsite Fan
Magnets, Clamp, Hang Hole, Sit on Base
Orange, Dark Gray
Overall Length 9" (22.9 cm)
Overall Height 10.52" (26.7 cm)
Overall Width 4.15" (10.5 cm)
PJSFM1
Battery Life
Tool Storage
PJSFM1
Description
Jobsite Accessories
Rechargeable Personal Jobsite Fan • Personal fan has multiple mounting options perfect for the job site • Arm base rotates and cage spins 360° to aim airflow in any direction • Two powerful magnets and a hang hole are incorporated into the base for mounting • Base forms a strong clamp for attaching to studs or conduit • Features two long-lasting fan modes: Low for 9 hours; High for 5 hours
High 5 hrs, Low 9 hrs
Voice/Data/Video
Mobile Phone Holders
Size
Color
55460 55461 55468 55474 55563 55564
Small Large X-Large XX-Large Large X-Large
Black Black Black Black Camouflage Camouflage
Fits cell phones with cases up to: Height 5" (12.7 cm) 5.5" (13.97 cm) 6.25" (15.88 cm) 7" (17.78 cm) 5.5" (13.97 cm) 6.25" (15.88 cm)
Length 2.75" (6.99 cm) 3.25" (8.26 cm) 3.5" (8.89 cm) 3.75" (9.53 cm) 3.25" (8.26 cm) 3.5" (8.89 cm)
55460
55563
Width .625" (.6 cm) .625" (.6 cm) .75" (1.9 cm) .75" (1.9 cm) .625" (.6 cm) .75" (1.9 cm)
Overall Width
Overall Length
Overall Height
1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm)
3" (7.4 cm) 3.3" (8.4 cm) 3.75" (9.5 cm) 3.86" (9.8 cm) 3.3" (8.4 cm) 3.75" (9.5 cm)
5.75" (14.6 cm) 6" (14.9 cm) 6.75" (17.2 cm) 7.13" (18.3 cm) 6" (15.2 cm) 6.75" (17.2 cm)
55474
Power Tools and Accessories
Cat. No.
Test and Measurement
• Fits most mobile phone brands holder (Cat. No. 55474) easily accommodates • XX-Large your phone inside its protective case • Metal clip for attaching to belts up to 2" (5.1 cm)wide • Magnetic flap closure • Constructed of 1680d ballistic weave
Realtree Camouflage Design © 2012 of Jordan Outdoor Enterprises, Ltd., all rights reserved.
www.kleintools.com > 800-553-4676
181
Lifting, Pulling, and Structural
*Bluetooth® is a registered trademark of Bluetooth Special Interest Group (SIG).
AND POWER
BATTERIES
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Portable Power Station, 1500W No Gas · No Fumes · Just Power Delivers a powerful 1500W of Pure Sine-Wave AC power Built-in Lithium-ion battery pack allows for safe, indoor use Fast charge in 2.5 hours (From 0-80% with supplied chargers) Pass through charging to simultaneously charge the KTB1000 and power devices Charge and power 11 devices using four 120V outlets, six USB ports (3 60W USB-C PD and 3 x USB-A) and a 12V car port Extend runtime by pairing up to two Klein Tools Solar Panels (Cat. No. 29250 – Sold separately) Jobsite ready design with heavy duty construction and washable / replaceable air filter for use in dusty environments
• • • • • • •
Input / Output
Voice/Data/Video
120V
Test and Measurement
USB
12V
Lifting, Pulling, and Structural
Power Tools and Accessories
Charging
Cat. No. KTB1000
Application Table Saw (Sheathing plywood) Chop Saw (SPF 2 x 4) Hammer Drill (Concrete 6" deep holes with 7/8" bit) Work Light (5000 Lumen, 50 W) Laptop (Lenovo® ThinkPad® 11e) 1.5Ah Power Tool Battery 4Ah Power Tool Battery iPhone® 12 Pro iPad Pro® Galaxy® Tab S6 Klein Tools Rechargeable Personal Fan (Cat. No. PJSFM1) Klein Tools Headlamp (Cat. No. 56049) Klein Tools Portable Speaker (Cat. No. AEPJS2) Air Compressor (120W 12V) Heated Blanket (56W) Fast Charger (288W) to 80% Mobile Charger (120W) to 80% Fast Charger + Mobile Charger (400W) to 80% 2x Klein Tools 60W Solar Panels (29250) to 80%
Description Portable Power Station, 1500W
Capacity 983Wh (91Ah / 10.8V)
Mobile charger
KTB1000 Car adapter
Performance 550 feet ripped 700 cuts 140 holes drilled 15.7 hours 24 charges 27 charges 10 charges 80 charges 24 charges 34 charges 52 charges 196 charges 108 charges 6.5 hours 14 hours 3 hours 7.5 hours 2.5 hours 7.5 hours
Battery Lithium-ion
Overall Length 15.8" (40.1 cm)
Fast charger
Overall Width 10.8" (27.4 cm)
Overall Height 10.4” (26.3 cm)
Times and charges are approximate, and not additive, and may vary by application, and ambient environmental conditions. Galaxy Tab S6® is a registered trademark of Google LLC. iPhone® 12 Pro, iPad Pro® are registered trademarks of Apple Inc. Lenovo™ and ThinkPad™ are registered trademarks of the Lenovo Group Limited. Anderson Powerpole® is a registered trademark of Anderson Power Products, Inc.
182
www.kleintools.com > 800-553-4676
Pliers
Batteries and Power
Strippers, Cutters, and Crimpers
Portable Power Station, 500W 100% Portable · 0% Gas Delivers 500W of Pure Sine-Wave AC power Lightweight design and collapsible handle maximize portability Built-in Lithium-ion battery pack allows for safe, indoor use Charge and power 7 devices using two 120V outlets, four USB ports (60W USB-C PD, USB-C and 2 x USB-A) and a 12V car port Enough capacity to power a 5,000 lumen, 50W work light for 8 hours Extend runtime by pairing with one Klein Tools Solar Panel (Cat. No. 29250 – Sold separately) Pass through charging to simultaneously charge the KTB500 and power devices
Drivers and Wrenches
• • • •
Conduit Tools and Measurement
• • •
KTB500
Wall charger Car adapter Description Portable Power Station, 500W
Capacity Battery 505Wh Lithium-ion (46.8Ah / 10.8V)
Overall Length 11.8" (29.9 cm)
Overall Width 7.5" (19.1 cm)
Overall Height 7.3" (18.5 cm)
Tool Kits
Cat. No. KTB500
Times and charges are approximate, and not additive, and may vary by application, and ambient environmental conditions.
Powerpole® (APP®), or 8mm DC connectors Capability to chain an additional panel (Up to 120W) to collect more solar power and increase charge times Kickstands angle the panel to help maximize the surface exposed to the sun and LED lights indicate your level of solar power input Two monocrystalline panels fold, creating a protective, compact case for easy storage and versatility A long reaching 16.4-Foot (5 m) APP® cable, the APP® to 8mm DC Connector, and the APP® chaining cable all conveniently store in the integrated power pocket
Jobsite Accessories
• • • •
Safety, PPE and Comfort
Solar Panel foldable solar panel capable of charging power stations, • 60-watt portable batteries and other devices using USB-A, Anderson
Tool Storage Voice/Data/Video
29250
Test and Measurement
Overall Length 20.5" (52.1 cm)
Overall Width 2" (5.1 cm)
Overall Height 36.5" (92.7 cm)
Power Tools and Accessories
Cat. No. 29250
Compatible Products KTB1000, KTB500
Anderson Powerpole® is a registered trademark of Anderson Power Products, Inc.
183
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers
PowerBox 1 magnets for attaching to • Powerful metal job boxes, workbenches, and more LED lights brightens up any job box to • Integrated locate stored tools, batteries, and cords 120V AC outlets, two USB-A ports and one • Four 45W PD capable USB-C port for fast charging of cell
• •
Conduit Tools and Measurement
Drivers and Wrenches
Batteries and Power
MAGNETIC MOUNTING
LED LIGHTING
45W USB-C
POWER DELIVERY
phones, laptops, and other compatible devices Built-in surge protection with LED indicator to protect your equipment from electrical spikes Durable, 5' power cord for flexible mounting across job box or elsewhere
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
29601
Cat. No. 29601
Overall Length 5.8" (14.7 cm)
Overall Width 1.8" (4.6 cm)
Overall Height 4.7" (11.9 cm)
Chargers and Cables charge the KTB1000 from 0 to 80% • Fast in only 2.5 hours with supplied chargers
• •
(Cat. Nos. 29035 and 29210) Lengthy 10’ cord allows for added convenience when charging your KTB500 (Cat. No. 29201) The 20" flexible cord is an adapter for USB-A to USB-C ports (Cat. No. 29202)
29035 29210
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Mount Magnetic or Hang holes
29202
29201 Cat. No. 29035 29201 29202 29209 29210
Description Fast Charger - 288W 80W Wall Charger USB Charging Cable Car Adapter - 12V Auto to 8mm Barrel Mobile Charger - 120W
For Use With: KTB1000 KTB500 KTB1000, KTB500 and devices with USB-A or USB-C ports KTB500, KTB1000
Connectors 120V AC to APP® 120V AC to 8mm barrel USB-A to USB-C
KTB1000
120V AC to 8mm Barrel
12V Auto to 8mm Barrel
Lifting, Pulling, and Structural
29209 Anderson Powerpole® is a registered trademark of Anderson Power Products, Inc.
184
www.kleintools.com > 800-553-4676
Pliers
Jobsite > Tool Storage
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories
Tool bags from Klein come in a wide variety of shapes and sizes to match the diverse tools and accessories professionals use every day.
Backpacks
Tool Storage
TOOL STORAGE
Pouches Holders
Voice/Data/Video
Belts & Suspenders
Test and Measurement
Tool Bags Storage Racks
185
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Lineman/Utility Buckets, Bags, and Accessories
Power Tools and Accessories
Test and Measurement Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
TOOL POUCHES, BELTS AND SUSPENDERS
Lifting, Pulling, and Structural
Pliers
Tool Pouches
8-Pocket Extra Capacity
10-Pocket
11-Pocket
Strippers, Cutters, and Crimpers
Multi-Pocket Tool Pouches and riveted to assure long life • Stitched • Made in the USA with global components
Drivers and Wrenches Conduit Tools and Measurement
5190 5165 5162T
Safety, PPE and Comfort
8-Pocket
Tool Kits
5167
7-Pocket
Jobsite Accessories
5166
5178
5164T
Tool Storage
5164
Voice/Data/Video
Cat. No. 5167
Belt Connection Slotted
Belt Width 2.75" (7 cm)
Overall Length 10" (25.4 cm)
Overall Width 2.75" (7 cm)
Overall Height 10.5" (26.7 cm)
Leather Leather Leather Leather Leather
Slotted Slotted Slotted Tunnel Tunnel
2" (5.1 cm) 1.75" (4.5 cm) 2" (5.1 cm) 2.5" (6.4 cm) 2.5" (6.4 cm)
10" (25.4 cm) 6" (15.2 cm) 6.75" (17.2 cm) 6.75" (17.2 cm) 11" (27.9 cm)
2" (5.1 cm) 1.75" (4.5 cm) 2" (5.1 cm) 2.5" (6.4 cm) 2" (5.1 cm)
10" (25.4 cm) 8.75" (22.2 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 10" (25.4 cm)
Leather Leather
Tunnel Tunnel
3" (7.6 cm) 2.25" (5.7 cm)
8.5" (21.6 cm) 7" (17.8 cm)
3" (7.6 cm) 2.25" (5.7 cm)
10.75" (27.3 cm) 9.5" (24.1 cm)
187
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
5162T 5166
Material Leather
Test and Measurement
5165 5190 5164 5164T 5178
Number of Pockets Special Features 11 Knife Snap, Chain Tape Thong, Metal Tape Measure Holder 10 Knife Snap 10 Leather Tape Thong 8 Knife Snap 8 Knife Snap 8 Knife Snap, Chain Tape Thong, Metal Tape Measure Holder 8 Knife Snap, Leather Tape Thong 7 Chain Tape Thong
Pliers Strippers, Cutters, and Crimpers
Tool Pouches Multi-Pocket Tool Pouches • Made in the USA with global components •
5-Pocket
Conduit Tools and Measurement
Drivers and Wrenches
6-Pocket
5126
5127T
5125
5125L
Tool Kits
5127
4-Pocket
Safety, PPE and Comfort
3-Pocket
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
5145 5119
Cat. No.
Number of Pockets
Special Features
Material
5127 5127T 5126 5125
6 6 5 5
Knife Snap Knife Snap Knife Snap Chain Tape Thong
5125L 5119 5145
5 4 3
Chain Tape Thong Knife Snap 1" Reinforced Gusset
Leather Leather Leather No. 4 Canvas with Leather Back Leather Leather Leather
Tunnel Slotted Tunnel
Belt Width 2" (5.1 cm) 2.5" (6.4 cm) 2" (5.1 cm) 2.25" (5.7 cm)
Overall Length 7" (17.8 cm) 7" (17.8 cm) 6" (15.2 cm) 7.5" (19.1 cm)
Overall Width 2" (5.1 cm) 2.5" (6.4 cm) 2" (5.1 cm) 4.25" (10.8 cm)
Overall Height 10" (25.4 cm) 10" (25.4 cm) 8.75" (22.2 cm) 8.5" (21.6 cm)
2.25" (5.7 cm) 2" (5.1 cm) 1" (2.5 cm)
7.5" (19.1 cm) 6.5" (16.5 cm) 5.25" (13.3 cm)
4.25" (10.8 cm) 2" (5.1 cm) 1" (2.5 cm)
8.5" (21.6 cm) 8.5" (21.6 cm) 7" (17.8 cm)
Lineman Pouches leather construction with double leather back for • Black durability • Rivet hole for belt connection • Riveted to assure long life knife snap, pockets for pliers, most screwdrivers, • Includes 6' (1.8 m) folding rule and open-ended wrenches • Made in the USA with global components 5118P5
Cat. No. 5118P4 5118P5
Lifting, Pulling, and Structural
Belt Connection Slotted Tunnel Slotted Tunnel
188
Number of Pockets 4 5
Special Features Knife Snap Knife Snap
Material Leather Leather
www.kleintools.com > 800-553-4676
Belt Connection Rivet Hole Rivet Hole
Overall Length 8" (20.3 cm) 10" (25.4 cm)
Overall Width 3" (7.6 cm) 3" (7.6 cm)
Overall Height 11" (27.9 cm) 11" (27.9 cm)
5118P4
Pliers
Tool Pouches
Strippers, Cutters, and Crimpers Drivers and Wrenches
Nail/Screw and Tool Pouches construction, riveted and stitched for • Leather extra durability pockets have rolled-over doubled edges • Large for extra-long life No. 42241 has hammer loops on both sides, • Cat. allowing for convenient use by right- or lefthanded workers
42246
Cat. No. 42241 42246
Number of Pockets 6 4 4
Material Leather Leather
Belt Connection Tunnel Tunnel
Belt Width 3" (7.6 cm) Up to 3" (7.6 cm)
Overall Length 11" (27.9 cm) 11.25" (28.6 cm)
Overall Width 3" (7.6 cm) 2" (5.1 cm)
Overall Height 11.75" (29.9 cm) 10.5" (26.7 cm)
Leather
Tunnel
Up to 3" (7.6 cm)
11.25" (28.6 cm)
2" (5.1 cm)
10.5" (26.7 cm)
Tool Kits
42245
Special Features Heavy Hammer Loops Left-Hand Heavy Hammer Loop Right-Hand Heavy Hammer Loop
42245
Safety, PPE and Comfort
Material Leather
Overall Length 4.5" (11.4 cm)
Overall Width 1" (2.5 cm)
5111
Overall Height 7" (17.8 cm)
Tool Storage
Number of Pockets 1
Jobsite Accessories
Single-Pocket Tool Pouch • Perfect for carrying pliers and other tools in the hip pocket • Prevents wear and tearing of clothes, discomfort, and possible injury • Riveted to assure long life • Made in the USA with global components
Cat. No. 5111
Voice/Data/Video
4
Leather Cordura® Ballistic Nylon
Belt Belt Connection Width Snap Loop Up to 2" (5.1 cm) Snap Loop Up to 2" (5.1 cm)
Overall Length 5.75" (14.6 cm) 5" (12.7 cm)
Overall Width 2.5" (6.4 cm) 2" (5.1 cm)
Overall Height 10" (25.4 cm) 9.875" (25.1 cm) 5481
189
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
5482
Power Tools and Accessories
5482
Material
Test and Measurement
Back Pocket Pouches • Stitched and riveted to assure long life • Snap loop option for belt • Made in the USA with global components
Cat. No. Number of Pockets 5481 6
Conduit Tools and Measurement
42241
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Tool Pouches Nut and Bolt Pouch • Includes interior pocket • Top sides of pouch reinforced with leather to maintain shape of pouch opening • Inside bottom is reinforced with leather and ventilating eyelet • Metal snaps provided on loops for easy attachment to belts up to 3" (7.6 cm) wide • Top edge reinforced with 1/4" (0.6 cm) rope • Made in the USA with global components Number of Pockets Material 1 No. 10 Canvas
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Cat. No. 51A
Belt Connection Web Loop and Snap Hook
Belt Width Up to 3" (7.6 cm)
Overall Length 9" (22.9 cm)
Overall Width 3.5" (8.9 cm)
Overall Height 10" (25.4 cm)
Belt Connection Tunnel
Belt Width Up to 3" (7.6 cm)
Overall Length 5" (12.7 cm)
Overall Width 8.5" (21.6 cm)
Overall Height 8.5" (21.6 cm)
Belt Connection Latigo Thongs
Belt Width Up to 3" (7.6 cm)
Overall Length 7" (17.8 cm)
Overall Width 3.25" (8.3 cm)
Overall Height 9" (22.9 cm)
Belt Connection Belt Strap
Belt Width Up to 3" (7.6 cm)
Overall Length 9" (22.9 cm)
Overall Width 3" (7.6 cm)
Overall Height 8" (20.3 cm)
51A
Leather Bolt Bag • Split-leather construction • Bolt bag with bull-pin loop on each side
Cat. No. 42247
Number of Pockets Material 1 Leather
42247
Strap-Leather Bag • • Ventilating eyelet in bottom • Made in the USA with global components
Cat. No. 5140K
Number of Pockets Material 1 Leather
5140K
All-Purpose Bag • Soft, pliable cushion leather construction • For carrying loose tools and small parts • Adjustable belt strap for attaching to belts • Made in the USA with global components Cat. No. 5146
Number of Pockets Material 1 Leather
5146
190
www.kleintools.com > 800-553-4676
Pliers
Tool Pouches
Strippers, Cutters, and Crimpers
Water-Repellent Canvas Pouches • One-piece tan 10 oz water-repellent mildew resistant canvas • Top edge reinforced with 1/4" (.6 cm) rope • Made in the USA with global components
5179S
10 oz Canvas
Snap
Belt Width Up to 4.5" (11.4 cm) Up to 4.5" (11.4 cm)
Overall Length 7.5" (19.1 cm) 7.5" (19.1 cm)
Overall Width 7" 17.8 cm) 7" (17.8 cm)
Overall Height 3.5" (8.9 cm) 3.5" (8.9 cm)
5179
5179S
Tool Kits
5141P
Number of Pockets 2
Material No. 8 Canvas
Belt Connection Loops
1
No. 8 Canvas
Loops
5142P
2
No. 8 Canvas
Loops
Overall Length 10" (25.4 cm) 9" (22.9 cm) 9" (22.9 cm)
Overall Width 5" (12.7 cm) 8" (20.3 cm) 8" (20.3 cm)
Overall Height 12" (30.5 cm) 10" (25.4 cm) 10" (25.4 cm)
Jobsite Accessories
5142
Belt Width Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm)
Safety, PPE and Comfort
Canvas Utility Bags • • Inside bottom is reinforced with cushion leather and ventilating eyelet • Metal snaps provided on loops for easy attachment to belts up to 3" (7.6 cm) wide • Top edge reinforced with 1/4" (.6 cm) rope • Made in the USA with global components Cat. No.
Conduit Tools and Measurement
10 oz Canvas
Belt Connection Loops
1
Material
Drivers and Wrenches
Cat. No. Number of Pockets 5179 1
5141P
Tool Storage Voice/Data/Video
Canvas Electrode Bags • Made of tough No. 4 canvas • Heat-resistant, hard leather bottom Cat. No. 5471FR is made of flame-resistant No. 4 canvas, features hard-leather • bottom and meets the performance requirement of NFPA -701 Tunnel loop for sliding over belt • Made in the USA with global components •
Test and Measurement
Cat. No.
5471FR
1
Material
Belt Connection Tunnel
No. 4 Canvas, Leather Bottom Tunnel No. 4 FlameResistant Canvas
Belt Width Up to 3" (7.6 cm) Up to 3" (7.6 cm)
Diameter 2.5" (6.4 cm) 2.5" (6.4 cm)
Front Depth 12" (30.5 cm) 12" (30.5 cm)
Back Depth 15.5" (39.4 cm) 15.5" (39.4 cm)
Power Tools and Accessories
5471
Number of Pockets 1
5471
5471FR
191
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers
Bull-Pin and Bolt Bags • Made of flame-resistant No. 4 canvas and meets the performance requirement of NFPA - 701 (Cat. No. 5416TFR) • Bolt bag with bull-pin loop on each side • Two D-rings on the front of the pouch and four on the inside to offer plenty of space to connect tethers, and buckle at top for closing (Cat. No. 5416OCTO) • Drain holes to release any water build-up (Cat. No. 5416TSR) • Made in the USA with global components
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Tool Pouches
INTERIOR Showing bolts prevented from falling out when pouch is upside down
Safety, PPE and Comfort
5416T
5416TFR
5416TBR
Voice/Data/Video
Tool Storage
Jobsite Accessories
5416
BOTTOM
5416TC
5416L
rivet holes for drainage
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
5416TSR
Cat. No. 5416 5416T 5416TBR 5416TFR 5416TSR 5416TC 5416TCP 5416L 5416OCTO
192
Number of Pockets 3 3 1 3 1 2 3 1 3
5416OCTO
5416TCP
Material No. 4 Canvas No. 4 Canvas No. 4 Canvas Flame-Resistant No. 4 Canvas No. 4 Canvas No. 4 Canvas No. 4 Canvas Leather No. 4 Canvas
www.kleintools.com > 800-553-4676
Belt Connection Loop Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel Loop
Belt Width Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm) Up to 3" (7.6 cm)
Overall Length 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm)
Overall Width 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm) 9" (22.9 cm) 10" (25.4 cm) 12" (30.5 cm) 10" (25.4 cm) 5" (12.7 cm)
Overall Height 9" (22.9 cm) 9" (22.9 cm) 9" (22.9 cm) 9" (22.9 cm) 10" (25.4 cm) 9" (22.9 cm) 9" (22.9 cm) 9" (22.9 cm) 9" (22.9 cm)
Pliers
Tool Pouches
Strippers, Cutters, and Crimpers
One-Piece Nail/Screw and Tool Pouch Apron • Split-leather construction roomy double-pouch apron • Versatile, for construction workers, carpenters, and other professionals
Number of Pockets 10
Size One Size
Belt Width 2.25" (5.7 cm)
Overall Length 54" (137.2 cm)
Overall Width 5.5" (14 cm)
Conduit Tools and Measurement
Cat. No. 42242
42242
Drivers and Wrenches
• Riveted and stitched for extra durability • 4 slots for punches or nail sets • 2 heavy-duty hammer loops • Double-pouch design allows unrestricted leg movement • Apron is reinforced throughout with rivets large pockets and nail/bolt pockets have rolled-over, • The doubled edges for long wear 2" (5.1 cm) wide polypropylene web belt has • Heavy-duty rugged adjustable metal buckle • Made in the USA with global components Overall Height 9.5" (24.1 cm)
Tool Kits Jobsite Accessories
Cat. No. 42244
Safety, PPE and Comfort
Nail/Screw and Tool Pouch Combinations • Split-leather construction • Large pockets have rolled-over doubled edges for extra-long life • All pouches slide along belt for convenient working position • Left- and right-hand nail-and-tool pouches with tunnel loop connection 2" (5.1 cm) wide polypropylene web belt has rugged metal buckle • Heavy-duty and is adjustable from 32" (81.3 cm) to 48" (122 cm) • Tape-rule holder for 20' (6 m) and 25' (7.5 m) tape measures with belt clips • Heavy hammer loops Kit Contains Nail/Screw and Tool-Pouch Combination Description
42245 42246 5225 5195
Right-Hand Nail and Tool Pouch Left-Hand Nail and Tool Pouch Adjustable PolyWeb Tool Belt Tape Measure Holder, Leather, Medium
Tool Storage
Cat. No.
42244
Size M/L XL/2XL
Belt Width 1.5" (3.8 cm) 1.5" (3.8 cm)
Overall Length 52" (13.2 cm) 55.5" (141 cm)
Overall Width 4" (10.2 cm) 5" (12.7 cm)
Power Tools and Accessories
Number of Pockets 6 6
Test and Measurement
Cat. No. 42200 42201
42200
Voice/Data/Video
Electrician’s Tool Apron • Made of heavy-duty canvas • Deep pockets to fit your tools • Loops for extra tool storage • Tape measure holder • Special pockets for writing utensils • Riveted to assure long life • Made in the USA with global components
Overall Height 7.75" (19.7 cm) 11.5" (29.2 cm)
193
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers
Tool Holders • Black leather construction • Riveted to assure long life
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Tool Holders
Conduit Tools and Measurement
5118R S5118PRS with Knife Snap
5118PRS 5118C with Knife Snap
5118S
Safety, PPE and Comfort
Tool Kits
5118RT
5101
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
5107-6
5187
5187T
5188
5188T 5185
5100M 5107-9
Cat. No. 5118C 5118PRS S5118PRS 5118R 5118RT 5118S 5107-6 5107-9 5112 5100M 5101 5187 5187T 5188 5188T 5163 5185 5129
194
5163
5129
5112
For Use With 7" to 9" Side-Cutting Pliers, Most Screwdrivers, 6' Folding Rules and Open-Ended Wrenches from 9/16" to 13/16" 7" to 9" Side-Cutting Pliers, Most Screwdrivers and 6' Folding Rules 7" to 9" Side-Cutting Pliers, Most Screwdrivers and 6' Folding Rules 7" to 9" Side-Cutting Pliers and 6' Folding Rules 7" to 9" Side-Cutting Pliers and 6' Folding Rules 7" to 9" Side-Cutting Pliers and Most Screwdrivers 6" or 7" Long-Nose or Diagonal-Cutting Pliers 8" or 9" Long-Nose or Diagonal-Cutting Pliers 7" to 9" Side-Cutting Pliers Klein Scissor Snips or Shears Klein Electrician's Scissors Klein Electrician's Scissors and Cable-Splicer's Knife Klein Electrician's Scissors and Cable-Splicer's Knife Klein Cable-Splicer's Knife Klein Cable-Splicer's Knife Klein Skinning Knives Klein Utility Knives Standard Two-Cell Flashlight
www.kleintools.com > 800-553-4676
Number of Pockets 4
Belt Connection Belt Width Slotted Up to 2" (5.1 cm)
Overall Length 6.5" (16.5 cm)
Overall Width 2" (5.1 cm)
Overall Height 11" (27.9 cm)
3
Slotted
Up to 2" (5.1 cm)
6.75" (17.2 cm)
2" (5.1 cm)
10" (25.4 cm)
3
Slotted
Up to 2" (5.1 cm)
6.75" (17.2 cm)
2" (5.1 cm)
10" (25.4 cm)
2 2 2 1 1 1 1 1 2 2 1 1 1 1 1
Slotted Tunnel Slotted Slotted Slotted Slotted Tunnel Tunnel Slotted Tunnel Slotted Tunnel Slotted Slotted Slotted
Up to 2" (5.1 cm) Up to 3.75" (9.5 cm) Up to 2" (5.1 cm) Up to 2" (5.1 cm) Up to 2" (5.1 cm) Up to 2" (5.1 cm) Up to 2" (5.1 cm) Up to 1.5" (3.8 cm) Up to 2.25" (5.7 cm) Up to 2.25" (5.7 cm) Up to 2.25" (5.7 cm) Up to 2.25" (5.7 cm) Up to 2" (5.1 cm) Up to 2.5" (6.4 cm) Up to 2.25" (5.7 cm)
4.75" (12.1 cm) 4.5" (11.4 cm) 4.25" (10.8 cm) 3.5" (8.9 cm) 3.75" (9.5 cm) 3.25" (8.3 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2.125" (5.4 cm) 2.125" (5.4 cm) 3.5" (8.9 cm) 2.625" (6.7 cm) 3" (7.6 cm)
2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 1.125" (2.9 cm) 1.125" (2.9 cm) 1" (2.5 cm) 1" (2.5 cm) 1" (2.5 cm) 1.25" (3.2 cm) 1" (2.5 cm) 1" (2.5 cm) 1" (2.5 cm) 1" (2.5 cm) 0.75" (1.9 cm) 2.25" (5.7 cm)
8" (20.3 cm) 12.5" (31.8 cm) 10.75" (27.3 cm) 8.5" (21.6 cm) 11" (27.9 cm) 11" (27.9 cm) 8" (20.3 cm) 7" (17.8 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.75" (19.7 cm) 7.25" (18.4 cm) 9.375" (23.8 cm) 8.25" (20.1 cm) 9.5" (24.1 cm)
Pliers
Tool Holders
Strippers, Cutters, and Crimpers Drivers and Wrenches
Tape Measure Holders • Leather construction • Cut-out sides for easy access to tape for attaching to belts up to • Slotted 2-1/2" (6.4 cm) wide • Riveted to assure long life 5195
Description Leather Tape Measure Holder, Medium Leather Tape Measure Holder, Large
For Use With Klein Tape Measures 9216 9125, 9126, 9225, 9375, 9230
Belt Width Up to 2.5" (6.4 cm) Up to 2.5" (6.4 cm)
Overall Length 4.5" (11.4 cm) 5" (12.7 cm)
Overall Width 3" (7.6 cm) 2" (5.1 cm)
Overall Height 7" (17.8 cm) 7" (17.8 cm)
Conduit Tools and Measurement
Cat. No. 5195 5196
Material Leather Leather Leather
Belt Connection Slotted Tunnel Tunnel
Belt Width Up to 2.5" (6.4 cm) Up to 4" (10.2 cm) Up to 4" (10.2 cm)
Overall Length 4.313" (11 cm) 4.313" (11 cm) 4.313" (11 cm)
Overall Width 2.5" (6.4 cm) 3" (7.6 cm) 3" (7.6 cm)
Overall Height 7.875" (20 cm) 10" (25.4 cm) 10" (25.4 cm)
Safety, PPE and Comfort
Cat. No. 5456 5456T 5456TS
Tool Kits
Hammer Holders • Black leather construction • Heavy-metal hammer loop riveted to panel • Riveted and stitched to assure long life • Holds most Klein hammers except Lineman's and mining/specialty hammers • Made in the USA with global components 5456 5456T
5456TS
Jobsite Accessories
Belt Connection Slotted Tunnel
Belt Width Up to 2" (5.1 cm) Up to 3.5" (8.9 cm)
Overall Length 3.25" (8.3 cm) 3.25" (8.3 cm)
Overall Width 2" (5.1 cm) 3" (7.6 cm)
Overall Height 11" (27.9 cm) 12.25" (31.1 cm)
5417
5417T
5460 5461T
Leather Leather
Slotted Cotton Web Tunnel
Belt Width Up to 3.5" (8.9 cm) or to Slide Over D-Rings, Buckles, and Other Accessories Up to 2" (5.1 cm) Up to 2" (5.1 cm)
Overall Length Overall Width Overall Height 6" (15.2 cm) 1.5" (3.8 cm) 9.5" (24.1 cm) 6" (15.2 cm) 6" (15.2 cm)
2" (5.1 cm) 1" (2.5 cm)
8.5" (21.6 cm) 10" (25.4 cm)
5460
5461T
www.kleintools.com > 800-553-4676
195
Lifting, Pulling, and Structural
5459T
Power Tools and Accessories
Cat. No. Material Belt Connection 5459T Leather Tunnel
Test and Measurement
Spud Wrench Holders • Has tool slots for two erection wrenches • Holds erection wrenches and adjustable head construction wrench Cat. No. 3239 • Cat. No. 5461T has cotton web tunnel loop • Tunnel loop on Cat. Nos. 5459T and 5461T is riveted to assure long life • Made in the USA with global components
Voice/Data/Video
Cat. No. Material 5417 Leather 5417T Leather
Tool Storage
Bull-Pin Holders • Riveted to assure long life • Holds all standard bull pins • Made in the USA with global components
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Tool Holders and Belts Tape Thong • Leather strap with fiber bar • Fits all standard electrical tape rolls • Made in the USA with global components
Tie-Wire Reel Pad on the belt under the Klein • Worn tie-wire reel (Cat. No. 27400) • Made of 3/16" (.5 cm) thick rigging leather has a sponge-rubber • Underside pad to minimize hip fatigue • Made in the USA with global components ®
27450
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
5130
Cat. No. 27450
Tool Storage
Belt Width Up to 2" (5.1 cm)
Overall Length 7" (17.8 cm)
Connecting Bar Holder with Lock Collar Klein 7/8" (2.2 cm) connecting • Fits bars (Cat. Nos. 3246 and 3248) • Leather construction loop allows for weight • Tunnel distribution on belt • Fits belts up to 3.5" (8.9 cm) wide lock collar • Replacement (Cat. No. 5459C) available • Made in the USA with global components Cat. No.
Belt Connection Tunnel
Belt Width Up to 3.5" (8.9 cm)
Overall Length 3" (7.6 cm)
Overall Height 0.75" (1.9 cm)
Cat. No. 5130
Belt Connection Slotted
Overall Length 12" (30.5 cm)
Overall Width 4" (10.2 cm)
Overall Height 1" (2.5 cm)
Snap Loop • Black leather construction • Designed for tools with hang holes Loop with snap hook for carrying an • adjustable wrench, welder’s igniter or other tool with hang hole
• Riveted to assure long life • Made in the USA with global components 5459C
Overall Width 2" (5.1 cm)
5458
5459SLVR
Overall Height 6.75" (17.2 cm)
Cat. No. Belt Connection 5458 Tunnel
Belt Width Up to 4" (10.2 cm)
Overall Length 1.5" (3.8 cm)
Overall Width 0.5" (1.3 cm)
Overall Height 8.5" (21.6 cm)
WARNING: Lock collar should ONLY be used on Klein 7/8" connecting bars Lock collar must be installed on connecting bar before using holder.
Electrician’s Tool Belts • Strong, black leather construction • Includes tool loops and chain-tape thong • Made in the USA with global components
Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Overall Width 7" (17.8 cm)
Tie-wire reel and ironworker's heavy-duty tie-wire belts also available.
5459SLVR
Voice/Data/Video
Belt Connection Slotted
5207M
Cat. No. 5207M 5207L 5207XL
Waist Size 32" to 40" (81.3 to 101.6 cm) 38" to 46" (96.5 to 116.8 cm) 46" to 54" (116.8 to 137.2 cm)
5207L
Belt Width 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 5207XL
196
www.kleintools.com > 800-553-4676
Pliers
Tool Belts
Strippers, Cutters, and Crimpers
Waist Size 33" to 45" (83.8 to 114.3 cm) 32" to 40" (81.3 to 101.6 cm) 38" to 46" (96.5 to 116.8 cm) 46" to 54" (116.8 to 137.2 cm)
Belt Width 1" (2.5 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm)
5202L
Conduit Tools and Measurement
Cat. No. 5201 5202M 5202L 5202XL
Belt Width 2" (5.1 cm)
5204
Safety, PPE and Comfort
Waist Size Up to 56" (142.2 cm)
Tool Kits
Lightweight Utility Belt • Strong, lightweight blue synthetic-web • Quickly adjusts for waist sizes through 56" (142.2 cm) • Accepts tunnel-loop and slotted pouches and holders • Tough, molded, non-metallic, slide-action buckle provides single-handed, quick release and adjustment • Made in the USA with global components Cat. No. 5204
5225
Belt Width 2" (5.1 cm)
Voice/Data/Video
Heavy-Duty Tool Belts • Strong, heavy-duty leather construction Equipped with a double-tongue buckle (Cat. No. 5415 Series) or • double-tongue buckle with keeper (Cat. No. 5420 Series) Separate reel-strap its own buckle lets you quickly and conveniently • put on or take off a with Klein tie-wire reel (Cat. No. 5420 Series) • Made in the USA with global components
Test and Measurement
5415
Waist Size 32" to 40" (81.3 to 101.6 cm) 36" to 44" (91.4 to 111.8 cm) 40" to 48" (101.6 to 121.9 cm) 44" to 52" (111.8 to 132.1 cm) 32" to 40" (81.3 to 101.6 cm) 36" to 44" (91.4 to 111.8 cm) 40" to 48" (101.6 to 121.9 cm) 44" to 52" (111.8 to 132.1 cm)
Belt Width 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm)
Power Tools and Accessories
Cat. No. 5415S 5415 5415L 5415XL 5420S 5420 5420L 5420XL
Tool Storage
Waist Size 32" to 48" (81.3 to 121.9 cm)
Jobsite Accessories
Adjustable Web Tool Belt • Accommodates tunnel loop and slotted tool pouches and holders • 2" (5.1 cm) wide polypropylene webbing • Rugged metal buckle for quick release and easy adjustment • Corrosion resistant hardware • Made in the USA with global components Cat. No. 5225
Drivers and Wrenches
Tool Belts • Strong, black leather construction • Designed to carry lightweight tool pouches (Cat. No. 5201) • Removable single-tongue buckle held by two heavy-duty snaps (Cat. No. 5202 Series) • Made in the USA with global components
5420L
197
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Tool Belts and Suspenders Padded Leather Quick-Release Belts • Durable leather belt and pad provide comfort and safety • Quick-release buckle allows user to immediately disengage the belt if needed • Leather belt pad provides a comfortable cushion for the back • One-way release snaps keep the pad in place • Heavy-duty leather for long life • Made in the USA with global components 5426M
Cat. No. 5426M 5426L 5426XL
Waist Size 34" to 38" (86.4 cm to 96.5 cm) 38" to 46" (96.5 cm to 117 cm) 46" to 54" (116.8 to 137.2 cm)
Overall Width 5" (1.3 cm) 5" (1.3 cm) 5" (1.3 cm)
Cotton/Polyester Blend Tool Belt w/Quick-Release Buckle a forged, quick-release buckle for emergency situations where the user has to quickly • Features disengage the belt (for example, when working over water or in grain elevators) • Must be worn over the user’s harness and clothing so it will drop free when released • Made of a mildew-resistant blend of cotton/polyester webbing for comfort and strength • NOT an occupational protective belt. ONLY use as a tool belt • Made in the USA with global components 5425M
Cat. No. 5425M 5425XL
Waist Size 30" to 44" (76.2 to 111.8 cm) 38" to 58" (96.5 to 147.3 cm)
Belt Width 2" (5.1 cm) 2" (5.1 cm)
Designed for Quick Release 1. Pull free end of release strap to 2. Pulling action rotates disengage other end from retainer. clasp to open position.
3. Disengaged clasp allows belt to separate.
Suspenders & Belt Accessories Suspenders and slides are nickel-plated • Clips for corrosion resistance belt clips have alligator • Extra-strong teeth for added gripping power in the USA with • Made global components
Leather Cushion Belt Pads deluxe leather pad is comfortable • Durable, to wear for long periods leather back with four snap-open straps for • Thick easy attachment to any belt up to 2" (5.1 cm) wide leather liner has rounded edges, • Sponge-padded and is permanently stitched to the back sizing a belt to accommodate this pad, add • When 2" to 4" (5.1 to 10.2 cm) to the belt waist size • Made in the USA with global components 60210B
Cat. No. 60210B
198
Description Nylon-Web Suspenders with Adjustable Back
Color Blue
Size One Size Fits All
www.kleintools.com > 800-553-4676
Strap Width 2" (5.1 cm)
Cat. No. 87904 87906
Overall Length 22" (55.9 cm) 30" (76.2 cm)
Overall Width 4" (10.2 cm) 4" (10.2 cm)
87904
AND SUSPENDERS
TOOL POUCHES, BELTS
Safety, PPE and Comfort Jobsite Accessories Tool Storage
Waist Size 31" to 34" (78.7 to 86.4 cm) 35" to 39" (88.9 to 99.1 cm) 40" to 44" (101.6 to 111.8 cm)
Overall Width 46" (116.8 cm) 50.5" (128.3 cm) 55.5" (141 cm)
Test and Measurement
Overall Length 0.5" (1.3 cm)
Overall Width 19" (48.3 cm)
WARNING: This is NOT an occupational protective belt. NOT for fall arrest or back support.
Overall Height 10.5" (26.7 cm)
www.kleintools.com > 800-553-4676
199
Lifting, Pulling, and Structural
Belt Width 1.875" (4.7 cm)
5244
Power Tools and Accessories
Size Adjustable
Voice/Data/Video
Number of Pockets 6
Tool Kits
554428
Tradesman Pro™ 4-Pocket Tool Apron • Heavy duty reinforced bottom so tools won't poke through • 2 large open pockets for parts • 2 pockets for assorted tools • Includes pencil/marker pockets and a tape thong • Adjustable belt fits waist sizes 32" to 53" (81.3 cm to 134.6 cm) Cat. No. 5244
Conduit Tools and Measurement
Description Tradesman Pro™ Electrician's Tool Belt, Medium Tradesman Pro™ Electrician's Tool Belt, Large Tradesman Pro™ Electrician's Tool Belt, XL
Drivers and Wrenches
Cat. No. 55427 55428 55429
Strippers, Cutters, and Crimpers
Tradesman Pro™ Electrician’s Tool Belt • • Wide open pockets for tools, drills and spare parts pouches allow you to carry only the • Removable tools needed • Handles for easy carrying • Loop tape measure holder Padded belt with mesh interior is breathable and • comfortable • Rugged leather belt ends use with Tradesman Pro™ padded suspenders • For (Cat. No. 55400)
Pliers
TRADESMAN PRO
TM
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort
Tradesman Pro™ Tool Pouches Maintenance Pouch (Cat. No.5240)
• Easy grab and go styling keeps your basic tools right at hand • Includes a tape thong 6-Pocket Tool Pouch (Cat. No. 5241)
• Heavy duty reinforced bottom one deep center pocket, five outside pockets, • Features plus tape thong 5240
9-Pocket Tool Pouch (Cat. No. 5242)
• Heavy duty reinforced bottom • Deep center pocket and closed front pocket to carry small parts an array of other pockets for various tools, • Includes plus a tape thong handle for “pick up and go” mobility; • Convenient shoulder strap for hands free carry
5243
15-Pocket Tool Pouch (Cat. No. 5243)
• Heavy duty reinforced bottom • Features multiple pockets of various sizes, plus a tape thong a padded shoulder strap for easy carrying to use • Includes without a belt Drill Pouch (Cat. No. 5183)
• Fits most impact and battery drills • Strap closure keeps drill in place • Pockets for a variety of drill bits
5241
5183
14-Pocket Shoulder Pouch (Cat. No. 55419SP-14)
• Double stitched seams for extra durability • Resized pockets to better fit tools • Shoulder strap with extra padding • Longer pockets for screwdrivers
Voice/Data/Video
Tool Storage
Jobsite Accessories
Tool Pouches
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
55419SP-14 5242
Cat. No. 5240 5241 5242 5243 5183 55419SP-14
200
Number of Pockets 9 6 9 15 4 14
Material 1680d Ballistic Weave 1680d Ballistic Weave 1680d Ballistic Weave 1680d Ballistic Weave 1680d Ballistic Weave 1680d Ballistic Weave
www.kleintools.com > 800-553-4676
Belt Connection Tunnel Tunnel Tunnel Tunnel Tunnel —
Belt Width Up to 2" (5.1 cm) Up to 2" (5.1 cm) Up to 2" (5.1 cm) Up to 2" (5.1 cm) Up to 2" (5.1 cm) —
Overall Length 10.25" (26 cm) 10.25" (26 cm) 9.5" (24.1 cm) 11.5" (29.2 cm) 7.25" (18.4 cm) 11" (27.9 cm)
Overall Width 5.5" (14 cm) 6.75" (17.2 cm) 7.5" (19.1 cm) 4.5" (11.4 cm) 3" (7.6 cm) 10.5" (26.7 cm)
Overall Height 10.25" (26 cm) 10.25" (26 cm) 9.5" (24.1 cm) 10" (25.4 cm) 12.25" (31.1 cm) 10" (25.4 cm)
Pliers
Tool Pouches
Strippers, Cutters, and Crimpers
loop tape measure holder 2" (5.1 cm) wide belt features padded liner with breathable mesh interior Thick, rugged leather belt ends Side handles for ease of lifting Includes metal connection points to attach suspenders for extra support Patent Pending
55917
Conduit Tools and Measurement
55914
Tool Kits
• • • • •
Drivers and Wrenches
Tradesman Pro™ Modular Tool Pouch System • Build your own tool belt and storage system Quick-release clip design on four styles of pouches allows for easy change from • belt to wall rack 32° clip design on pouches to keep contents upright when changing from belt • to wall rack • Pouches constructed of 1680d ballistic weave for durability Rack securely stores three Modular Tool Pouches, and comes with • Wall mounting hardware to secure in garage, shop, or work van Belts with thick, rugged belt ends have side handles for ease of lifting, metal • Tool connection points to attach suspenders (Cat. No. 50400) for extra support, and
Safety, PPE and Comfort
55920
Jobsite Accessories
55913
55912
Tool Storage
55921 Modular Pouches Description
Material
Belt Connection
Belt Width
7 7 8 4
1680d Ballistic Weave
Click Lock™
Up to 2" (5.1 cm)
Overall Length 24" (61 cm)
Overall Width 2" (5.1 cm)
Overall Height 1.5" (3.8 cm)
55912 Piping Tool Pouch with Belt Clip 55913 Parts Pouch with Belt Clip 55914 Trimming Pouch with Belt Clip 55917 Drill Pouch with Belt Clip Modular Wall Rack Cat. No.
Description
55921 Wall Rack Modular Tool Belts
Material Heavy-Duty Anodized Aluminum
Description
Material
Waist Size
Overall Width
55918 55919 55920
Tool Belt - M Tool Belt - L Tool Belt - XL
Ballistic Polyester and Leather
31" to 34" (78.7 to 86.4 cm) 35" to 39" (88.9 to 99.1 cm) 40" to 44" (101.6 to 111.8 cm)
5" (12.7 cm)
Power Tools and Accessories
Cat. No.
Test and Measurement
Number of Pockets
Voice/Data/Video
Cat. No.
WARNING: This is NOT an occupational protective belt. NOT for fall arrest or back support.
201
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Tool Storage Tradesman Pro™ Padded Suspenders • Tear resistant • Fully adjustable • Durable nylon web straps for long wear • Heavy duty padding for comfort • Easy snap hook fastening system
Cat. No. 55400
Color Black
Size One Size Fits Most
Strap Width 1.5" (3.8 cm)
WARNING: This is NOT an occupational protective belt. NOT for fall arrest or back support.
Tradesman Pro™ Knife Holder • Holds up to a 4.5" (11.4 cm) knife • Metal clip attaches securely to belt or pocket • Magnetic closure keeps top flap firmly in place
Cat. No. 5248
Material 1680d Ballistic Weave
Overall Length 5.25" (13.3 cm)
Overall Width 2.5" (6.4 cm)
Overall Height 5.25" (13.3 cm)
5248
Tradesman Pro™ Hard Cases shell protects tools, meters, • Hard small parts and tech devices • Soft interior lining • Durable zipper closure
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
55400
Cat. No. 5184 5189
202
Number of Pockets 1 1
Overall Length 8.75" (22.2 cm) 10.25" (26 cm)
Overall Width 6.5" (16.5 cm) 5.5" (14 cm)
www.kleintools.com > 800-553-4676
Overall Height 2.25" (5.7 cm) 2.25" (5.7 cm)
5189
5184
Pliers
Tool Storage Strippers, Cutters, and Crimpers Drivers and Wrenches
Tradesman Pro™ Carrying Cases • Two layers of padding protect even delicate instruments • Heavy-duty zipper and rugged PVC coated polyester for durability • Pockets for quick access and organization No. 69406 has loop with snap closure to attach to belts, • Cat. bags and backpacks Nos. 69407 and 69408 have sturdy handle with box • Cat. stitching for secure transportation and convenient hanging Nos. 69406 and 69407 recommended for meters, testers, • Cat. infrared guns, and small tools No. 69408 recommended for meters, testers, • Cat. infrared guns, tools, and borescopes • Made in the USA with global components
Conduit Tools and Measurement
Number of Pockets 1 2 2
Overall Length 4.75" (12 cm) 6.25" (15.9 cm) 7.25" (18.4 cm)
Overall Height 2.25" (5.7 cm) 4" (10 cm) 4.75" (12 cm)
55563
55460
Jobsite Accessories
Overall Width 9" (22.9 cm) 10.25" (26 cm) 10.25" (26 cm)
69408
Safety, PPE and Comfort
Cat. No. 69406 69407 69408
Tool Kits
69407
69406
Tool Storage
Tradesman Pro™ Mobile Phone Holders • Fits most mobile phone brands holder Cat. No. 55474 easily accommodates • XX-Large your phone inside its protective case • Metal clip for attaching to belts up to 2" (5.1 cm) wide • Magnetic flap closure • Constructed of 1680d ballistic weave
Voice/Data/Video
Color
55460 55461 55468 55474 55563 55564
Small Large X-Large XX-Large Large X-Large
Black Black Black Black Camouflage Camouflage
Fits cell phones with cases up to: Height 5" (12.7 cm) 5.5" (13.97 cm) 6.25" (15.88 cm) 7" (17.78 cm) 5.5" (13.97 cm) 6.25" (15.88 cm)
Length 2.75" (6.99 cm) 3.25" (8.26 cm) 3.5" (8.89 cm) 3.75" (9.53 cm) 3.25" (8.26 cm) 3.5" (8.89 cm)
Width .625" (.6 cm) .625" (.6 cm) .75" (1.9 cm) .75" (1.9 cm) .625" (.6 cm) .75" (1.9 cm)
Overall Width
Overall Length
Overall Height
1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm) 1.5" (3.8 cm)
3" (7.4 cm) 3.3" (8.4 cm) 3.75" (9.5 cm) 3.86" (9.8 cm) 3.3" (8.4 cm) 3.75" (9.5 cm)
5.75" (14.6 cm) 6" (14.9 cm) 6.75" (17.2 cm) 7.13" (18.3 cm) 6" (15.2 cm) 6.75" (17.2 cm)
Power Tools and Accessories
Size
Test and Measurement
Cat. No.
55474
Realtree Camouflage Design © 2012 of Jordan Outdoor Enterprises, Ltd., all rights reserved.
203
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories
Constructed of double layered 1000 denier washable Cordura® fabric
Double nylon-stitched and rivet reinforced for extra durability
Heavy-duty, nylon webbing
Oversized pockets and reinforced bottom for extra carrying capacity, as well as durability
Washable
Cordura® is a registered trademark of INVISTA for durable fabrics
PowerLine™ Series Tool Pouches
5719
5703
5701
Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
No break-in period; naturally forms and hugs the body, making it easy to wear for everyday use
Lightweight and comfortable in warm climates, soft and pliable in cold climates
Voice/Data/Video
Tool Storage
Exceptional resistance to abrasion, punctures, and tearing
5702
5700
Cat. No. 5700 5701 5702 5703 5718 5719 5766
204
Number of Pockets 9 8 2 3 8 18 7
Belt Connection Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel Tunnel
www.kleintools.com > 800-553-4676
5766
5718
Belt Width 2.5" (6.4 cm) 2.5" (6.4 cm) 2.5" (6.4 cm) 2.5" (6.4 cm) 2.5" (6.4 cm) 2.5" (6.4 cm) 2.5" (6.4 cm)
Overall Length 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm)
Overall Width 3" (7.6 cm) 6" (15.2 cm) 2" (5.1 cm) 2" (5.1 cm) 2.25" (5.7 cm) 3.75" (9.5 cm) 6" (15.2 cm)
Overall Height 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 15" (38.1 cm)
Pliers
Tool Pouches and Belts
Includes core PowerLine™ features plus: 8-Pocket Tool Pouch (Cat. No. 5701) 3-Pocket Utility Pouch (Cat. No. 5703) Hammer Holder (Cat. No. 5706) Sized Padded Tool Belt (Cat. No. 5704M, 5704L or 5704XL) Made in the USA with global components
5709L
Waist Size 32" to 36" (81.3 to 91.4 cm) 36" to 40" (91.4 to 101.6 cm) 40" to 44" (101.6 to 111.8 cm)
Belt Width 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm)
Conduit Tools and Measurement
Cat. No. 5709M 5709L 5709XL
Drivers and Wrenches
• • • • •
Tool Kits
PowerLine™ Series 4-Piece Electrician’s Combo Sets
• • • • •
Belt Width 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm)
Jobsite Accessories
Waist Size 32" to 36" (81.3 to 91.4 cm) 36" to 40" (91.4 to 101.6 cm) 40" to 44" (101.6 to 111.8 cm)
5710M
Safety, PPE and Comfort
Includes core PowerLine™ features plus: 8-Pocket Tool Pouch (Cat. No. 5718) 18-Pocket Tool Pouch (Cat. No. 5719) Hammer Holder (Cat. No. 5706) Sized Padded Tool Belt (Cat. No. 5704M, 5704L or 5704XL) Made in the USA with global components Cat. No. 5710M 5710L 5710XL
Strippers, Cutters, and Crimpers
PowerLine™ Series 4-Piece Combo Sets
Tool Storage
PowerLine™ Series Padded Tool Belts
• • • •
Cat. No. 5705
Waist Size One Size Fits up to 54" (137.2 cm) Waist
Belt Width 2" (5.1 cm)
Includes core PowerLine™ features plus: 5" (12.7 cm) cushioned pad for stability and comfort Tapered front for comfort while bending Heavy-duty 2" (5.1 cm) wide nylon web belt with rugged metal buckle Made in the USA with global components
• • • •
Cat. No. 5704M 5704L 5704XL
Belt Width 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm)
www.kleintools.com > 800-553-4676
205
Lifting, Pulling, and Structural
WARNING: This is NOT an occupational protective belt. NOT for fall arrest or back support.
Waist Size 32" to 36" (81.3 to 91.4 cm) 36" to 40" (91.4 to 101.6 cm) 40" to 44" (101.6 to 111.8 cm)
Power Tools and Accessories
Includes core PowerLine™ features plus: Heavy-duty, 2" (5.1 cm) wide nylon webbing for extra strength Accommodates tunnel loop and slotted tool pouches and holders Rugged metal buckle for quick release and adjustment Made in the USA with global components
Test and Measurement
PowerLine™ Series Adjustable Web Work Belt
5704L
Voice/Data/Video
5705
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Tool Holders and Suspenders PowerLine™ Series Tape Measure Pouch
PowerLine™ Series Tape Measure Holder
Includes core PowerLine™ features plus: Holds most 35' (11 m) tape measures, fasteners, nails, or wire nuts Two inside elastic loops fit screwdrivers, pencils, markers, etc. Made in the USA with global components
Includes core PowerLine™ features plus: Holds most tape measures with belt clips Stainless steel clip holder accepts most tape clips up to 1-3/4" (4.4 cm) wide Made in the USA with global components
• • •
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Cat. No. 5712
Belt Connection Tunnel
Belt Width Up to 2.25" (5.7 cm)
Overall Length 8.25" (21 cm)
5712
Overall Width 2.25" (5.7 cm)
• • •
Overall Height 4.5" (11.4 cm)
Cat. No. 5707
Belt Connection Tunnel
Belt Width Up to 2.25" (5.7 cm)
Overall Length 4.125" (10.5 cm)
PowerLine™ Series Closeable Pouch
PowerLine™ Series Hammer Holder
Includes core PowerLine™ features plus: Closeable pouch helps protect supplies and tools Made in the USA with global components
Includes core PowerLine™ features plus: Heavy-metal hammer loop riveted for additional strength Made in the USA with global components
• •
Cat. No. 5714
Belt Connection Tunnel
Belt Width Up to 2.25" (5.7 cm)
Overall Length 7.5" (19.1 cm)
5714
Overall Width 2.25" (5.7 cm)
Belt Width 2" (5.1 cm)
Overall Length 6.25" (15.9 cm)
Cat. No. 5706
Belt Connection Tunnel
Belt Width Up to 2.25" (5.7 cm)
Overall Width 3.25" (8.3 cm)
Overall Height 3" (7.6 cm)
Cat. No. Belt Connection 5716 Tunnel
Belt Width Up to 2.25" (5.7 cm)
Includes core PowerLine™ features plus: Fully adjustable length - front and back Heavy-duty, 1.5" (3.8 cm) wide nylon web strap for extra strength and long wear Convenient fastening system features genuine VELCRO® brand touch fasteners Heavy-duty padding for user comfort Made in the USA with global components
• • • •
206
Overall Height 3.75" (9.5 cm)
5716
Includes core PowerLine™ features plus: Accommodates most “D” cell size battery flashlights up to 1.875" (4.8 cm) in diameter Heavy-duty, 1.5" (3.8 cm) wide nylon webbing for extra strength Riveted to assure long life Made in the USA with global components
Overall Length 4.25" (10.8 cm)
Overall Width 2.25" (5.7 cm)
• •
PowerLine™ Series Padded Suspenders
Belt Width Up to 2.25" (5.7 cm)
Overall Length 4.125" (10.5 cm)
5706
Includes core PowerLine™ features plus: Holds standard utility knife or other small tools Made in the USA with global components
PowerLine™ Series Flashlight Holder
Cat. No. Belt Connection 5713 Tunnel
Overall Height 3.75" (9.5 cm)
PowerLine™ Series Utility Knife Holder
5715
Cat. No. Belt Connection 5715 Metal Clip
Overall Width 2.25" (5.7 cm)
• •
Overall Height 6.75" (17.2 cm)
PowerLine™ Series Mobile Phone Holder • Fits most large mobile phones • Made in the USA with global components
5707
5713
Overall Width 2.25" (5.7 cm)
www.kleintools.com > 800-553-4676
Overall Height 2.375" (6 cm)
Overall Length 7.75" (19.7 cm)
Overall Width 1" (2.5 cm)
Overall Height 2.5" (6.4 cm)
• • • • •
Cat. No. 5717
Size One Size Fits Most
Strap Width 1.5" (3.8 cm)
Velcro® is a registered trademark of Velcro Industries B.V.
5717
WARNING: This is NOT an occupational protective belt. NOT for fall arrest or back support.
Strippers, Cutters, and Crimpers
Drivers and Wrenches
Conduit Tools and Measurement
Tool Kits
Safety, PPE and Comfort
Jobsite Accessories
Tool Storage
TOOL BAGS
Pliers
TRADESMAN PRO
TM
Voice/Data/Video
Test and Measurement
Power Tools and Accessories
Lifting, Pulling, and Structural
Pliers Conduit Tools and Measurement Tool Kits
with handles and D-Ring for hanging
Be ready for anything Metal hanging hook tucks easily away
Padded handle with reinforced aircraft cable
Durable back padding extends over the hard bottom for carrying comfort
Large interior space fits larger hand tools like drills
48 POCKETS
Extra padding on the shoulder straps
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
REMOVABLE TOOL CADDY
TOOL MASTER BACKPACK
Drivers and Wrenches
Strippers, Cutters, and Crimpers
TRADESMAN PRO
TM
Adjustable chest and lower straps for a customized fit
Hard molded plastic bottom protects from the elements
Tradesman Pro™ Tool Master Backpack • 48 pockets to easily keep everything organized Removable tool caddy with carrying handles and a D-ring for hanging, a zipper pocket and • closed pouches for small tools and parts, and open pockets and straps ideal for long drivers Aircraft cable heavily reinforces the handle as well as a heavy-duty zipper with lockable pulls • Made of durable 1680d ballistic weave material and a molded bottom to help protect from the elements • Hang the bag from the heavy-duty metal hook for easy access into the bag • Well-padded shoulder straps have a buckled chest strap along with lower straps that adjust for a perfect fit • • Molded front pocket helps protect items like phones and safety glasses • Orange interior helps find tools easily and a large interior space for larger hand tools 55485
Cat. No. 55485
Lifting, Pulling, and Structural
Molded front pocket protects safety glasses, phones, etc.
208
Number of Pockets 48
Overall Length 11" (27.9 cm)
www.kleintools.com > 800-553-4676
Overall Width 13.5" (34.3 cm)
Overall Height 19.5" (50 cm)
Pliers
Durable, versatile, functional and designed with the tradesperson in mind
1680d ballistic weave for durability
Drivers and Wrenches
Multiple pockets sized specifically to fit all your tools for complete organization
Conduit Tools and Measurement
Most Tradesman Pro™ bags have these core features
Strippers, Cutters, and Crimpers
TRADESMAN PRO
TM
Tool Kits
Bright colored interior for easy tool visibility
Safety, PPE and Comfort
Tough, durable molded bottoms to protect from the elements
Tradesman Pro™ Tool Station Backpacks Jobsite Accessories
Includes core Tradesman Pro™ features plus: Backpack with 21 pockets and large interior for maximum tool storage Cat. No. 55655 includes removable Flashlight with Worklight; A bright magnetic flashlight and broadcasting work light in one tool Elastic loop holds Worklight for hands-free illumination of backpack interior when working in low light areas Front of backpack unzips halfway for quick tool access or fully extends for workstation access Extra padding on the shoulder straps and back for carrying comfort Adjustable chest and lower straps for a customized fit Front zipper pocket for small items Exterior organization includes side elastic pouch for water bottle, tape measure clip, and tape thong
Tool Storage
• • • • • • • •
Voice/Data/Video
55482
Test and Measurement
55655
Power Tools and Accessories
Backpack shown with worklight (Cat. No. 55655) Cat. No. 55482
Description Tradesman Pro™ Tool Station Backpack
55655
Tradesman Pro™ Tool Station Backpack with Worklight
Number of Pockets 21
Overall Length 14.5" (36.8 cm)
Overall Width 9’’ (22.9 cm)
Overall Height 19.25’’ (48.9 cm)
21
14.5" (36.8 cm)
9’’ (22.9 cm)
19.25’’ (48.9 cm)
209
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Tradesman Pro™ Electrician's Backpacks Includes core Tradesman Pro™ features plus: Wide opening fits power drills, meters, flashlights, etc. Large front pocket easily fits cables and tools Cat. No. 55597 has a polyester upper pocket and Cat. Nos. 55421BP-14 and 55421BP14CAMO have a hard molded pocket to protect safety glasses, meters, etc. Resized pockets to better fit tools Shoulder strap with extra padding Longer pockets for screwdrivers Cat. No. 55597 features reflective shoulder and front strips
• • • • • • •
55421BP14CAMO
Tool Kits
Conduit Tools and Measurement
Tool Bags
55597
Safety, PPE and Comfort
Realtree Camouflage Design © 2012 of Jordan Outdoor Enterprises, Ltd., all rights reserved.
Cat. No. 55421BP-14 55421BP14CAMO
Jobsite Accessories
55597*
55421BP-14
Description Tradesman Pro™ Tool Bag Backpack, 39 Pockets, Black, 14-Inch Tradesman Pro™ Tool Bag Backpack, 39 Pockets, Camo, 14-Inch Tradesman Pro™ Tool Bag Backpack, 39 Pockets, High Visibility, 20-Inch
Number of Pockets 39
Overall Length 14.5" (36.8 cm)
Overall Width 7.25" (18.4 cm)
Overall Height 20" (50.8 cm)
39
14.5" (36.8 cm)
7.25" (18.4 cm)
20" (50.8 cm)
39
14.375" (36.5 cm)
7" (17.8 cm)
20" (50.8 cm)
* DOES NOT conform to ANSI/SEA 107-2015 high visibility safety apparel and accessories standard.
Tradesman Pro™ Tool Gear Backpack • Tall interior pockets for long screwdrivers • Upper pocket holds cell phones, keys, etc. pocket has space for • Zipper pencils and small items Bottom is constructed of a coated • tough diamond-textured material Orange interior to find tools faster • 1680d ballistic weave for durability •
Includes core Tradesman Pro™ features plus: Storage for adapters and cables Organizer pocket for pens, phone, cables, and more Hard, molded front pocket protects safety glasses Cat. No. 55439BPTB fits laptop up to 3" (7.6 cm) thick
• • • •
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Tradesman Pro™ Tech Backpack
55475
Separate compartment keeps laptop protected from other tools Cat. No. Number of Pockets 55456BPL 25 55439BPTB 25
210
Overall Length 14" (35.6 cm) 14" (35.6 cm)
55456BPL
Overall Width 7" (17.8 cm) 7" (17.8 cm)
www.kleintools.com > 800-553-4676
Overall Height 18.5" (47 cm) 18.5" (47 cm)
Cat. No. 55475
Number of Pockets 35
Overall Length 7.375" (18.7 cm)
Overall Width 14.5" (36.8 cm)
Overall Height 17.5" (44.5 cm)
Pliers
Tool Bags
Strippers, Cutters, and Crimpers
Tradesman Pro™ Wide-Open Tool Bags Includes core Tradesman Pro™ features plus: Stay-open top for unobstructed tool access Large interior zipper pocket Inside is equipped with various sized pockets for tools and gear Multiple exterior front and back pockets for quick access Tall interior pockets for long screwdrivers Front pockets hold tools or small parts Mesh side pockets Outside has side mesh pockets and a metal tape measure holder Shoulder strap with extra padding and handles Cat. No. 55598 has reflective outer strips for visibility in low-light environments*
Drivers and Wrenches
• • • • • • • • • •
Conduit Tools and Measurement
55469
Number of Pockets 42 42
Overall Length 10.25" (26 cm) 17.5" (44.5 cm)
Overall Width 17.75" (45.1 cm) 10" (25.4 cm)
Tool Kits
Cat. No. 55469 55598*
Overall Height 16.25" (41.3 cm) 16" (40.6 cm) 55598
Safety, PPE and Comfort
*DOES NOT conform to ANSI/SEA 107-2015 high visibility safety apparel and accessories standard.
Tradesman Pro™ Tech Bag Jobsite Accessories
Includes core Tradesman Pro™ features plus: Inside pocket for adapters and cables Zipper pocket for files and paperwork Rubber feet and water resistant material on bottom protects from the elements
• • •
Tool Storage
Separate compartment keeps laptop protected from other tools Number of Pockets 22
Overall Length 19" (48.3 cm)
Overall Width 6.5" (16.5 cm)
Overall Height 16" (40.6 cm)
55455M
Tradesman Pro™ Lighted Tool Bag
Test and Measurement
Includes core Tradesman Pro™ features plus:
• twists on/twists off so light can be positioned to illuminate inside the bag or the outside workspace
Power Tools and Accessories
See 55437 Worklight in Illumination section for additional information or to order a replacement light. Tools not included
Cat. No. 55431
Number of Pockets 31
Overall Length 15.25" (38.7 cm)
Voice/Data/Video
Cat. No. 55455M
Overall Width 8" (20.3 cm)
Overall Height 14" (35.6 cm)
55431
211
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Tradesman Pro™ Tool Master Rolling Tool Bag Includes core Tradesman Pro™ features plus: Rugged 8" (20.3 cm) wheels provide high clearance to easily roll over rough terrain Hard top allows for stacking materials on top Load tested up to 250 lb (113 kg) Twist-lock Klein LED Light (Cat. No. 55437) or Wireless Speaker (Cat. No. AEPJS1) on front mount (items sold separately) Heavy-duty telescoping handle for easy maneuvering on the jobsite Exterior webbing and D-rings allow for bungee cord attachment and other add-ons Metal latches keep lid closed Double lock hasp on hard top fits padlock so nothing goes missing (padlock not included) Constructed with durable water-resistant 1680d ballistic weave material Wide open interior accommodates large tools Orange interior for easy tool visibility
• • • • • • • • • • •
Rugged 8" wheels and molded kick plate to protect from the elements
Cat. No. 55473RTB
Number of Pockets 19
Hard top contoured to hold cell phone, beverages and small parts
Overall Length 21.8" (55.4 cm)
Overall Width 15.4" (39.1 cm)
Overall Height 22.5" (57.2 cm)
55473RTB
Tradesman Pro™ Tradesman Pro™ Rolling Tool Bag Includes core Tradesman Pro™ features plus: Rugged 6" (15.2 cm) wheels easily handle rough terrain Load tested up to 200 lb (90.7 kg) Top has reinforced metal frame that stays open for easy loading/unloading Heavy-duty telescoping handle Withstands cold conditions
• • • • •
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Tool Bags
Molded kick plate to protect from the elements
Cat. No. 55452RTB
Number of Pockets 24
Wide open interior to accommodate large tools
Overall Length 19" (48.3 cm)
Overall Width 12.5" (31.8 cm)
Overall Height 14" (35.6 cm)
Lifting, Pulling, and Structural
55452RTB
212
www.kleintools.com > 800-553-4676
Pliers
Tool Bags
Strippers, Cutters, and Crimpers
Tradesman Pro™ Totes Includes core Tradesman Pro™ features plus:
Drivers and Wrenches
• extra durability • Resized pockets to better fit tools Large zipper pockets for tools • and small parts Shoulder strap with extra padding • Longer pockets for screwdrivers •
Conduit Tools and Measurement Tool Kits
554158-14
Number of Pockets 20 40
Overall Length 8.75" (22.2 cm) 10" (25.4 cm)
Overall Width 8.75" (22.2 cm) 10.25" (26 cm)
Safety, PPE and Comfort
Cat. No. 554158-14 5541610-14
5541610-14
Overall Height 17" (43.2 cm) 12.25" (31.1 cm)
Jobsite Accessories
pockets, eleven pliers pockets, eleven utility pockets, two wire stripper pockets, and two Velcro® closeable pockets Heavy-duty webbing keeps pockets open for easy access to supplies and tools
Voice/Data/Video
•
Tool Storage
Tradesman Pro™ Bucket Bag • Double layer of polyester at bucket edges for durability pockets include: three tool sleeves, one power • Interior tool/cord sleeve, and six universal pockets • Exterior pockets include: nine screwdriver/nut driver
Test and Measurement
55448
Number of Pockets 45
Diameter 19" (48.3 cm)
Power Tools and Accessories
Cat. No. 55448
VELCRO® is a registered trademark of Velcro Industries B.V. Tools not included.
213
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement Voice/Data/Video
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
TOOL BAGS
Tool Storage
Pliers
Tool Bags
Strippers, Cutters, and Crimpers
Overall Length 14" (35.6 cm) 16" (40.6 cm) 16" (40.6 cm) 18" (45.7 cm) 18" (45.7 cm) 24" (61 cm)
Overall Width 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm)
Overall Height 14" (35.6 cm) 14" (35.6 cm) 14" (35.6 cm) 14" (35.6 cm) 14" (35.6 cm) 15" (38.1 cm)
5102-16SPBLK 5102-16SP
Overall Height 10" (25.4 cm) 10" (25.4 cm) 14" (35.6 cm) 14" (35.6 cm) 14" (35.6 cm) 15" (38.1 cm) 15" (38.1 cm) 15" (38.1 cm)
5102-12
Voice/Data/Video
Overall Width 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm)
Tool Storage
Overall Length 12" (30.5 cm) 12" (30.5 cm) 14" (35.6 cm) 16" (40.6 cm) 18" (45.7 cm) 20" (50.8 cm) 22" (55.9 cm) 24" (61 cm)
Jobsite Accessories
Cat. No. 5102-12 510212BLK 5102-14 5102-16 5102-18 5102-20 5102-22 5102-24
Safety, PPE and Comfort
Canvas Tool Bags • Heavy-duty No. 8 natural canvas • Rivet-reinforced for durability • Steel-frame mouth with hinge for rugged use • Stitched and riveted leather handles for comfort ad strength • Two retaining straps with buckles provide secure closure • Bottom and lower sides are covered with moisture-resistant vinyl • Non-scratch studs on base protect against wear • Should strap kit available (Cat. No. 5102S) • Made in USA with global components
510212BLK
Overall Width 6" (15.2 cm) 6" (15.2 cm)
Power Tools and Accessories
Overall Length 20" (50.8 cm) 24" (61 cm)
Test and Measurement
High-Bottom Canvas Tool Bags • Heavy-duty No. 8 natural canvas • Bottom and 8" (20.3 cm) of lower sides are covered with moisture-resistant vinyl • Non-scratch studs on base protect against wear • Steel-frame mouth with hinge for rugged use • Harness-leather handles with two retaining straps and buckles bags with shoulder strap kit (Cat. No. 5102S). Kit includes leather strap • Retro-fit with pad and snap hooks, rings and fasteners for attaching rings to bags • Made in USA with global components Cat. No. 5105-20 5105-24
Tool Kits
Number of Pockets 10 13 13 13 13 17
Conduit Tools and Measurement
Cat. No. 5102-14SP 5102-16SP 5102-16SPBLK 5102-18SP 5102-18SPBLK 5102-24SP
Drivers and Wrenches
Deluxe Canvas Tool Bags • Multiple interior pockets for organization • Detachable shoulder strap can be adjusted for a perfect fit of heavy-duty No. 8 natural canvas; • Made Cat. Nos. 5102-16SPBLK and 5102-18SPBLK are made of black canvas vinyl bottom with non-scratch • Moisture-resistant studs on the base to protect against wear • Steel frame mouth with hinge for rugged use • Stitched and riveted leather handles for long life • Made in USA with global components
Overall Height 15" (38.1 cm) 15" (38.1 cm)
5105-20
215
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Canvas Tool Bags - Multiple Pockets, Leather Bottom • Steel-frame mouth with hinge for rugged use • Internal pockets in a variety of sizes • External pocket for additional carrying needs • Constructed of strong No. 8 natural canvas • Reinforced bottom supports heavy tools, blocks moisture, and provides durability at wear points • Wide opening provides easy access to large tools • Bottom is protected from the elements by 6 studs Shoulder strap mounts (optional shoulder strap available, Cat. No. 58889), leather • Includes: bottom and 3" (7.6 cm) of sides covered with black leather, 2" (5.1 cm) wide web handles, leather
•
handle wrap, and external tool loop handle in the webbing Made in USA with global components
Cat. No. 5003-18 5003-20
Number of Pockets 11 15
Overall Length 18" (45.7 cm) 20" (50.8 cm)
Overall Width 6" (15.2 cm) 6" (15.2 cm)
Overall Height 14" (35.6 cm) 15" (38.1 cm)
5003-18
Canvas Tool Bags • Heavy-duty No. 6 natural canvas • Double-layer canvas bottom • Reinforced, riveted web handles • Made in USA with global components
Cat. No. 5155 5156
Overall Length 17" (43.2 cm) 19" (48.3 cm)
Overall Width 9" (22.9 cm) 9" (22.9 cm)
Overall Height 12" (30.5 cm) 15" (38.1 cm)
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Tool Bags
5155
Cordura® Ballistic Nylon Tool Bag • Cordura ballistic nylon, a high-performance fabric resistant to abrasions, tears and scuffs • Molded bottom made with a durable, impact modified polypropylene • Eight interior and two exterior pockets hold a wide assortment of hand tools and supplies • Large opening with reinforced steel frame maintains the bag's shape while loading and unloading • Heavy-duty nylon zipper closure and a large leather zipper-pull assure easy operation Box-stitched 2" (5.1 cm) wide polypropylene padded • carrying handles with comfortable leather wrap padded, slip-resistant adjustable shoulder strap • Optional (Cat. No. 58889) for hands-free mobility is available • Made in USA with global components ®
Cat. No. 5200-15
Number of Pockets 10
Overall Length 15" (38.1 cm)
Lifting, Pulling, and Structural
Cordura® is a registered trademark of INVISTA for durable fabrics.
216
www.kleintools.com > 800-553-4676
Overall Width 8" (20.3 cm)
Overall Height 14.5" (36.8 cm) 5200-15
Pliers
Tool Bags
Strippers, Cutters, and Crimpers Drivers and Wrenches
Tool Totes • Constructed of rugged, 600 x 300 denier polyester to resist wear and tear on the jobsite • 2" (5.1 cm) wide polypropylene padded carrying handles with comfortable leather wrap • Water-resistant to avoid the build-up of mold and mildew • Exterior pockets hold a variety of tools and a mobile phone interior pockets and a large interior compartment for a wide assortment of tools • Multiple and supplies (only with Cat. No. 58888 and Cat. No. 58890) • Durable molded bottom with drain holes to prevent water retention padded, slip-resistant shoulder strap for hands-free mobility (included with • Contoured, Cat No. 58888 and Cat. No. 58890) • Heavy-duty chain tape thong (Cat. No. 58890 only) • Made in USA with global components Number of Pockets 7 12 17
Chain Tape Thong No No Yes
Shoulder Strap No Yes Yes
Overall Length 15.5" (39.4 cm) 15.5" (39.4 cm) 15.5" (39.4 cm)
Overall Width 7.5" (19.1 cm) 7.5" (19.1 cm) 7.5" (19.1 cm)
Overall Height 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm)
Tool Kits
Cat. No. 58886* 58888 58890
*Optional shoulder strap (Cat. No. 58889) available.
Safety, PPE and Comfort
Weight 6.4 oz (181 g)
Overall Height 6" (15.2 cm)
Tool Storage
Diameter 11" (27.9 cm)
Jobsite Accessories
Ten-Compartment Drawstring Bag • 12 oz (340.2 g) olive canvas • 10 compartments to hold small parts • Drawstring for easy closing • Made in USA with global components
Cat. No. 5151
5151
Voice/Data/Video
Deluxe Leather Bags tool bag made of • Rugged extra-heavy leather Removable padded • shoulder strap Three-ply • with steel bottom studs Retaining straps extend • around bag for extra support in USA with • Made global components
Test and Measurement
Leather Tote Bag • extra-heavy leather Stitched and riveted • construction • Reinforced ends bottom with • Double-ply steel studs in USA with global • Made components
5108-18
Power Tools and Accessories
5115
Cat. No. 5115
Overall Length 15" (38.1 cm)
Overall Width 6.5" (16.5 cm)
Conduit Tools and Measurement
58890
Overall Height 7" (17.8 cm)
Cat. No. 5108-18 5108-20 5108-24
Overall Length 18" (45.7 cm) 20" (50.8 cm) 24" (61 cm)
Overall Width 7" (17.8 cm) 7" (17.8 cm) 7" (17.8 cm)
Overall Height 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm)
217
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Tool Bags
Tool Bag Accessories Adjustable Shoulder Strap Kit • Works with Cat. Nos. 5102 and 5105 series canvas tool bags • Adjustable strap is 1" (2.5 cm) wide with a 2-1/2" (6.4 cm) shoulder pad kit contains leather strap with pad and snap hooks, rings and • Complete fasteners for attaching rings to bags • Made in USA with global components Cat. No. 5102S
Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories
Adjustable Length 46 to 57.5" (116.8 to 146.1 cm)
Padded Adjustable Shoulder Strap • Shoulder strap for Tool Totes and 5003 series canvas tool bags • Adjustable from both ends for a perfect fit • Strap is 2" (5.1 cm) wide with a 3" (7.6 cm) soft shoulder pad • Made in USA with global components Cat. No. 58889
Lifting, Pulling, and Structural
5102S
Adjustable Length 37" to 55" (94 to 139.7 cm)
58889
Glove Bags Canvas Glove Bags • Made of durable canvas • Has an expansion gusset, 5-1/2" (14 cm) across the top and 2-3/4" (7 cm) at bottom • Brass grommets in bottom for ventilation • Supplied with two-way snap • Includes safety notice to remind workers of the importance of using gloves • Made in USA with global components Cat. No. 5121-15 5121-19 5124-15 5124-17 5124-19
Material No. 4 Canvas No. 4 Canvas No. 10 Canvas No. 10 Canvas No. 10 Canvas
Overall Length 15" (38.1 cm) 19" (48.3 cm) 15" (38.1 cm) 17" (43.2 cm) 19" (48.3 cm)
Overall Width 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm)
Top Depth 5.5" (14 cm) 5.5" (14 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
Bottom Depth 2.75" (7 cm) 2.75" (7 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
5121-15
Combination Glove and Sleeve Bags • Panels are tough No. 4 canvas • Provides separate storage for gloves and sleeves • Brass grommets in bottom for ventilation • Supplied with two-way snap • Includes safety notice to remind workers of the importance of using gloves • Made in USA with global components Cat. No. 5122-16 5122-18
218
Material No. 4 Canvas No. 4 Canvas
Overall Length 16" (40.6 cm) 18" (45.7 cm)
Overall Width 8" (20.3 cm) 8" (20.3 cm)
www.kleintools.com > 800-553-4676
Top Depth 4.813" (12.2 cm) 4.813" (12.2 cm)
Bottom Depth 4.813" (12.2 cm) 4.813" (12.2 cm)
5122-16
Strippers, Cutters, and Crimpers
ZIPPER BAGS
Pliers
Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Zipper Bags
Safety, PPE and Comfort
• Includes 2 zipper bags: 12.5" x 7" (31.8 cm x 17.8 cm) and 10" x 5.5" (25.4 cm x 14 cm) • Handy storage for pliers, wrenches, screwdrivers and other small tools and parts • Black aluminum carabiner included (not for human support) • Cat. No. 55599 features high-visibility interiors and reflective outer strips
Jobsite Accessories 55599
Material 1680d Ballistic Weave 1680d Ballistic Weave
55560
Color Black, Reflective Gray, Green Accents Camouflage
Overall Width 12.5" (31.8 cm), 10" (25.4 cm) 12.5" (31.8 cm), 10" (25.4 cm)
Overall Height 7" (17.8 cm), 5.5" (14 cm) 7" (17.8 cm), 5.5" (14 cm)
Voice/Data/Video
Cat. No. 55599* 55560
Tool Storage
Realtree Camouflage Design © 2012 of Jordan Outdoor Enterprises, Ltd., all rights reserved.
*DOES NOT conform to ANSI/ISEA 107-2015 high visibility safety apparel and accessories standard.
Material 1680d Ballistic Nylon, 2520d Ballistic Nylon Bottom
Color Orange/Black; Gray/Black
Power Tools and Accessories
Cat. No. 55470
Test and Measurement
Stand-Up Zipper Bags bottom of 2520d ballistic material • Reinforced prevents tools and parts from poking through • Stand-up bottom allows items to be found more easily • Colored interior to see items better • Bags are different sizes and colors to help with organization • Body of the bags are of tough 1680d ballistic material • Connect bags with a carabiner (not for human support) • Two-pack includes a 6.5" tall (16.5 cm) orange bag and a 7.5" tall (19.1 cm) gray bag
55470
Overall Length 8.5" (21.6 cm); 9" (22.9 cm)
Overall Width 1.125" (2.9 cm)
Overall Height 6.5" (16.5 cm); 7.5" (19.1 cm)
219
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories
Zipper Bags Canvas Zipper Bags • Heavy-duty brass zipper • Convenient storage for wire nuts, connectors and other consumables • 3.5" (8.9 cm) wide bottom for stability when standing; easy access when open • Available in 10" (25.4 cm) or 18" (45.7 cm) lengths • Brass grommet for hanging or attaching to belt or clip 5539LCPAK
Cat. No. 5539RED 5539BLU 5539YEL 5539NAT 5539CPAK 5539LRED 5539LBLU 5539LYEL 5539LNAT 5539LCPAK
Tool Storage Voice/Data/Video Test and Measurement
Color Red Blue Yellow Natural 3-Pack; Red, Blue, Yellow Red Blue Yellow Natural 3-Pack; Red, Blue, Yellow
Overall Length 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm) 18" (45.7 cm) 18" (45.7 cm) 18" (45.7 cm) 18" (45.7 cm) 18" (45.7 cm)
Overall Height 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm)
spare parts Made in USA with global components
NATURAL
BLUE
YELLOW
RED
5539NAT
US Patents: D621153, D625515, D625915
Cat. No. 5140 5141
5141
5140
Material No. 10 Canvas No. 10 Canvas
Color Blue, Yellow, Olive, Orange Red, Gray, Black, Brown
Overall Length 12.5" (31.8 cm) 12.5" (31.8 cm)
Overall Width 0.7" (1.8 cm) 0.7" (1.8 cm)
Overall Height 7" (17.8 cm) 7" (17.8 cm)
Contractor’s Zipper Portfolios • Great for transporting contracts, quotations, work orders, plans, and schedules • Holds clipboards, binders, and mobile phones • Convenient storage for pliers, wrenches, screwdrivers, nut drivers, other tools, and spare parts • Cat. No. 5236 has a heavy duty nylon zipper • Cat. Nos. 5136 and 5336 have heavy duty brass zippers
Cat. No. 5136 5236 5336
Material Top Grain Leather Cordura® Ballistic Nylon No. 10 Canvas
Color Brown Black Natural
Overall Length 17" (43.2 cm) 17" (43.2 cm) 17" (43.2 cm)
Cordura® is a registered trademark of INVISTA for durable fabrics.
Lifting, Pulling, and Structural
Overall Width 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm) 3.5" (8.9 cm)
Canvas Zipper Bags — 4 Pack four assorted colors to organize • Includes and categorize important tools • Heavy-duty brass zipper storage for pliers, wrenches, • Convenient screwdrivers, nut drivers, other tools, and
•
Power Tools and Accessories
Material No. 8 Canvas No. 8 Canvas No. 8 Canvas No. 8 Canvas No. 8 Canvas No. 8 Canvas No. 8 Canvas No. 8 Canvas No. 8 Canvas No. 8 Canvas
220
www.kleintools.com > 800-553-4676
Overall Width 0.7" (1.8 cm) 0.5" (1.3 cm) 0.7" (1.8 cm)
Overall Height 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm)
Weight 13.4 oz (381 g) 8.2 oz (231 g) 6.4 oz (181 g)
5136
Pliers
Zipper Bags
Strippers, Cutters, and Crimpers
Zipper Bags
Drivers and Wrenches
5139C 5139B 5139
Conduit Tools and Measurement
• Constructed of No. 10 canvas with heavy-duty brass zipper (Cat. No. 5139) • Convenient storage for pliers, wrenches, screwdrivers, nut drivers, other tools, and spare parts of Cordura ballistic nylon, a high-performance fabric resistant to abrasions, tears, • Constructed and scuffs (Cat. Nos. 5139B and 5139C) • Cat. No. 5139C features the jungle stalker digitized camouflage pattern for maximum concealment • Heavy-duty nylon stitching and zipper ensure durability and long life (Cat. Nos. 5139B and 5139C) ®
Tool Kits
5139L
Material No. 10 Canvas with Brass Zipper Cordura® Ballistic Nylon Cordura® Camouflage Top Grain Leather
Color Natural Black Camouflage Brown
Overall Length 12.5" (31.8 cm) 12.5" (31.8 cm) 12.5" (31.8 cm) 12.5" (31.8 cm)
Overall Width 0.7" (1.8 cm) 0.5" (1.3 cm) 0.5" (1.3 cm) 0.7" (1.8 cm)
Overall Height 7" (17.8 cm) 7" (17.8 cm) 7" (17.8 cm) 7" (17.8 cm)
Safety, PPE and Comfort
Cat. No. 5139 5139B 5139C 5139L
Cordura® is a registered trademark of INVISTA for durable fabrics.
Jobsite Accessories
Padded Cordura® Zipper Bag of Cordura washable fabric, a high performance fabric • Constructed resistant to abrasions, tears and scuffs • Three-layer padding provides additional protection to contents • Heavy-duty nylon zipper
Tool Storage
Felt
®
Foam
Nylon, Cordura®
Material Cordura® Ballistic Nylon
Color Black
Overall Length 12.5" (31.8 cm)
Overall Width 0.5" (1.3 cm)
Test and Measurement
Cat. No. 5139PAD
Voice/Data/Video
5139PAD
Overall Height 7" (17.8 cm)
Cordura® is a registered trademark of INVISTA for durable fabrics.
Power Tools and Accessories
221
Lifting, Pulling, and Structural
> 800-553-4676
STORAGE RACKS
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Slide Racks • Holds Klein mid-size or extra-large storage boxes • Boxes not included with rack; must be ordered separately • Welded, extra-rigid, all-steel construction • Metallic gray baked-enamel finish Boxes ride in and out on heavy-duty channel tracks that permit • covers to open all the way for full access Heavy tabs boxes from being accidentally pulled out, yet • allow boxesprevent to be easily removed when desired • Locking bars can be readily attached to prevent unauthorized access • Made in USA Cat. No. 54474 54476 54477
Holds Four Klein Mid-Size Storage Boxes Six Klein Mid-Size Storage Boxes Four Klein Extra-Large Storage Boxes
Overall Length 11.875" (30.2 cm) 11.75" (29.9 cm) 15.75" (40 cm)
Overall Width 15.188" (38.6 cm) 15.25" (38.7 cm) 20" (50.8 cm)
Slide Rack Locking Bars • Steel bars lock to secure mid-size storage boxes in slide racks • Front hasp pivots down to allow locking bar to open • Available for Klein four-box and six-box racks • Strong piano hinge • Metallic gray baked enamel finish • Mounting holes allow for easy installation with sheet metal screws or pop rivets • Made in USA
222
www.kleintools.com > 800-553-4676
Overall Height 11.313" (28.7 cm) 16.375" (41.6 cm) 15" (38.1 cm)
54474
54484
Cat. No. 54484 54486
Description Slide Rack Locking Bars for Cat. No. 54474 Slide Rack Locking Bars for Cat. Nos. 54476, 54477
Pliers
Storage Boxes
Strippers, Cutters, and Crimpers
Compartment Sizes Adjustable
Overall Length 12" (30.5 cm)
Overall Width 18" (45.7 cm)
Tool Kits
Number of Compartments Adjustable
Conduit Tools and Measurement
Cat. No. 54451
Drivers and Wrenches
Adjustable Compartment Parts Box • Movable dividers in this parts box allow compartment sections to be arranged and sized as desired • Three partitions, running from front to back, divide the box into four equal 4.5" (11.4 cm) x 12" (30.5 cm) sections straight metal dividers can be positioned anywhere between the partitions, • Nine in 1" (2.5 cm) increments, to create the compartments desired • Boxes feature strong, rigid, heavy-duty welded construction • Full-length piano hinged covers are designed to stay open for ease of access • Each box has a carrying handle, positive pull-down locking catch • Boxes are a heavy metallic gray baked-enamel finish • Box compartments feature high-impact styrene construction • Scoop-bottom design for easy parts removal and cleaning • Fits four drawer extra-large slide rack (Cat. No. 54477) • Made in USA
Overall Height 3" (7.6 cm)
54451
Safety, PPE and Comfort Jobsite Accessories
Compartment Boxes • Klein storage boxes are offered with a choice of compartment sizes and arrangements • Boxes feature strong, rigid, heavy-duty welded construction • Full-length piano hinged covers are designed to stay open for ease of access • Each box has a carrying handle, positive pull-down locking catch • Boxes have a heavy, metallic gray baked-enamel finish • Box compartments feature high-impact styrene construction • Scoop-bottom design for easy parts removal and cleaning • Fits four-drawer extra-large slide rack (Cat. No. 54477) • Fits either four-drawer slide rack (Cat. No. 54474) or six-drawer rack (Cat. No. 54476) • Made in USA
Tool Storage
Compartment Sizes 6-7/16" x 2-1/16" (16.4 x 5.2 cm) 4-5/16" x 2-5/16" (11 x 5.9 cm) 3-1/4" x 2-5/16" (8.3 x 5.9 cm) 2-5/8" x 2-5/16" (6.7 x 5.9 cm) 20 Each 2-1/16" x 2-5/16" (5.2 x 5.9 cm) and One 2-3/4" x 9-1/16" (7 x 23 cm) 4-3/8" x 2-7/8 (11.1 x 7.3 cm) 20 Each 2-3/4" x 2-7/8" (7 x 7.3 cm) and One 3-3/4" x 11-7/8" (9.5 x 30.2 cm) 20 Each 2-3/4" x 2-7/8" (7 x 7.3 cm) and Four 3-3/4" x 2-7/8" (9.5 x 7.3 cm) 32 Each 2-1/8" x 2-7/8" (5.4 x 7.3 cm)
Overall Length 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 9.75" (24.8 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm)
Overall Width 13.313" (33.8 cm) 13.313" (33.8 cm) 13.313" (33.8 cm) 13.313" (33.8 cm) 13.313" (33.8 cm) 18" (45.7 cm) 18" (45.7 cm) 18" (45.7 cm) 18" (45.7 cm)
Overall Height 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm) 3" (7.6 cm)
223
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Number of Compartments 8 12 16 20 21 16 21 24 32
Test and Measurement
Cat. No. 54436 54437 54438 54439 54440 54445 54446 54447 54448
Voice/Data/Video
54445
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
BUCKETS AND BAGS
LINEMAN/UTILITY
Lifting, Pulling, and Structural
Pliers
Load Rated Buckets
Strippers, Cutters, and Crimpers
Flame-Resistant Canvas Buckets
Drivers and Wrenches
WARNINGS:
Conduit Tools and Measurement
• Inspect for damage before each use. • Remove from service if bucket shows signs of wear. • Never exceed the working load limit.
Meets the performance requirement of NFPA -701
Tool Kits
Load Rated Buckets Durable straight wall buckets made of • heavy-duty materials to withstand the harshest job site conditions
(Cat. Nos. 5109CSV and 5109SV) Drawstring close tool bucket top allows for easy opening and closing (Cat. Nos. 5114DSC and 5114DSC22)
Jobsite Accessories
•
Safety, PPE and Comfort
bottoms extend up • Reinforced the sides for added durability straps extend down the • Web sides for additional strength a 5 gallon bucket (not included) • Hold (Cat. Nos. 5104CLR17 and 5104CLR22) D-Ring for tether connection • Interior (Cat. No. 5104OCTO) orange water-resistant vinyl • Bright for easy visibility and keeps tools dry
5104FR
5104S 5114DSC
5104CLRFR
Cat. No.
Load Rating
5104CLR17
Tool Storage
5109PS
5109CSV
Overall Height
5104 5104S 5104OCTO 5104FR 5104CLRFR 5114DSC 5114DSC22 5104CLR17 5104CLR22
100 lb (45 kg) 100 lb (45 kg) 100 lb (45 kg) 100 lb (45 kg) 100 lb (45 kg) 100 lb (45 kg) 100 lb (45 kg) 150 lb (68 kg) 150 lb (68 kg)
12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 14" (35.6 cm) 14" (35.6 cm)
No. 4 Canvas No. 4 Canvas No. 1 Canvas No. 4 Flame-Resistant Canvas No. 4 Flame-Resistant Canvas No. 4 Canvas No. 4 Canvas No. 1 Canvas No. 1 Canvas
Interior Pocket Interior Pocket, Swivel Snap (Cat. No. 2012) Interior Pocket, Oversized Hook, D-Ring Connection Points Interior Pocket Interior Pocket, Double-Locking Carabiner, Zipper Closed Top, Leather Covered Strap Double-Locking Carabiner Double-Locking Carabiner Snap Hook (Cat. No. 443A), Zipper Closed Top Heavy Duty D-Ring, Zipper Closed Top
17" (43.2 cm) 17" (43.2 cm) 15" (38.1 cm) 17" (43.2 cm) 17" (43.2 cm) 17" (43.2 cm) 22" (55.9 cm) 17" (43.2 cm) 22" (55.9 cm)
No. 6 Canvas No. 6 Canvas No. 6 Canvas No. 6 Canvas Vinyl Vinyl No. 4 Canvas
— Swivel Snap (Cat. No. 2012) Interior Pocket Interior Pocket, Swivel Snap (Cat. No. 2012) Swivel Snap (Cat. No. 2012) Swivel Snap (Cat. No. 2012), Zipper Closed Top Snap Hook (Cat. No. 443A), Drain Holes
15" (38.1 cm) 15" (38.1 cm) 15" (38.1 cm) 15" (38.1 cm) 15" (38.1 cm) 17" (43.2 cm) 15" (38.1 cm)
Black Molded Polypropylene Bottom
5109 5109S 5109P 5109PS 5109SV 5109CSV 5109SLR
75 lb (34 kg) 75 lb (34 kg) 75 lb (34 kg) 75 lb (34 kg) 100 lb (45 kg) 100 lb (45 kg) 150 lb (68 kg)
12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm)
Power Tools and Accessories
Special Features
Test and Measurement
Material
Voice/Data/Video
Diameter
Leather Reinforced Bottom
VELCRO® is a registered trademark of Velcro Industries B.V.
225
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers
Lineman/Utility Buckets and Bags Canvas Buckets • Durable canvas construction • Web handle extends down the sides of the bucket for added strength No. 5104VT features top with Velcro brand fasteners and • Cat. multiple attachment loops for easy access and tool storage
Drivers and Wrenches
®
Cat. No.
Diameter
Material
Special Features
Overall Height
— Two 7" (17.8 cm) Square Inside Pockets Swivel Snap (Cat. No. 2012)
14" (35.6 cm) 14" (35.6 cm)
Conduit Tools and Measurement
Black Molded Polypropylene Bottom
5106 5106P
9" (22.9 cm) 9" (22.9 cm)
No. 6 Canvas No. 6 Canvas
5106S
9" (22.9 cm)
No. 6 Canvas
14" (35.6 cm) 5106P
Leather Reinforced Bottom
5104VT
12" (30.5 cm)
No. 1 Canvas
®
VELCRO Closure
17" (43.2 cm)
5016S
VELCRO® is a registered trademark of Velcro Industries B.V.
Tool Kits
Tapered-Wall Buckets • Black molded polypropylene bottom diameter is 12" (30.5 cm) and • Top tapers to 9" (22.9 cm) at the bottom leather glove strap (Cat. Nos. • Riveted 5103S, 5171PS and 5172PS)
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
5104VT
5106
5103S
5113
5172PS 5113S
Cat. No. 5113 5113S 5103S 5171PS 5172PS
Material No. 6 Canvas No. 6 Canvas No. 4 Canvas No. 4 Canvas No. 4 Canvas
Special Features — Swivel Snap (Cat. No. 2012) Swivel Snap (Cat. No. 2012) Swivel Snap (Cat. No. 2012); 4 Exterior Pockets Swivel Snap (Cat. No. 2012); 15 Interior Pockets
5171PS
Overall Height 13" (33 cm) 13" (33 cm) 12" (30.5 cm) 12" (30.5 cm) 12" (30.5 cm)
Vinyl Bucket Top • Top cover for canvas bucket designed to keep the elements out and tools securely inside • Compatible with Klein Tools 5104 and 5109 series buckets • Attaches with Velcro • Includes safety strap loop to ensure connection to bucket • Bucket not included
Power Tools and Accessories
®
Cat. No. 51TOP
Diameter 12.5" (31.8 cm)
Overall Height 3.5" (89 cm)
Lifting, Pulling, and Structural
VELCRO® is a registered trademark of Velcro Industries B.V.
226
www.kleintools.com > 800-553-4676
Weight 6.4 oz (181 g)
51TOP
Pliers
Lineman/Utility Buckets and Bags
Strippers, Cutters, and Crimpers
Oval Bucket with Pockets • Black molded polypropylene bottom Nos. 5144S and 5152S have • Cat. sisal-rope handles equipped with
Drivers and Wrenches
•
Cat. No. 2012 swivel snap hook Cat. No. 5144 includes 2 nylon 66 polymer hooks (Cat. No. 5144H)
Conduit Tools and Measurement
5144 5144B
Material No. 6 Canvas No. 6 Canvas No. 6 Canvas No. 6 Canvas
Color Natural Natural Natural Natural
Number of Pockets 15 41 15 15
Overall Height 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm)
Safety, PPE and Comfort
Cat. No. 5144S 5152S 5144 5144B
5152S
Jobsite Accessories Tool Storage
Hard Body Oval Buckets • Black molded polypropylene bottom with drain holes No. 5144HBS includes leather skinning knife • Cat. sheath and 14 other interior pockets • Cat. No. 5144H hooks sold separately • Made in USA
Voice/Data/Video
5144BHHB 5144BHB14OS
Test and Measurement
5144BHB
5144HBS
5144BHB
5144HBS
REAR KICK STAND
INTERIOR KNIFE SHEATH
Material Non-conductive High Density Polyethylene Non-conductive High Density Polyethylene Denier Polyester Plastic; Denier Polyester; Polypropylene
Color Orange Orange Black Orange
Number of Pockets 14 14 29 15
Power Tools and Accessories
Cat. No. 5144BHB 5144BHHB 5144BHB14OS 5144HBS
Tool Kits
5144S
Overall Height 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm)
227
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Lineman/Utility Buckets and Bags Lineman's Duffel Bag • Bright orange for easy visibility • Water-resistant vinyl protects against the elements • Drain holes help minimize water build up • Mesh strips keep bag aerated so clothes and equipment can dry • Web straps extend around the bag for extra support • Handles are large enough to carry bag like a backpack Overall Length 24" (61 cm)
Overall Width 12" (30.5 cm)
Overall Height 12" (30.5 cm)
5216V
Lineman's Backpack • Wide opening easily accommodates helmets, belts, and other equipment • Large front pocket for separate storage of gaffs, rubber gloves, or other equipment • Durable, double stitched plastic bottom with drain holes • Rain flap for top of pack • Adjustable padded shoulder straps with adjustable waist strap • Padded back area Cat. No. 5185ORA 5185BLK
Number of Pockets 4 4
Color Orange Black
Overall Length 18" (45.7 cm) 18" (45.7 cm)
Overall Width 10" (25.4 cm) 10" (25.4 cm)
Overall Height 23" (58.4 cm) 23" (58.4 cm)
5185ORA
Vinyl Equipment Bags • Wide bag opening easily accommodates helmets and other equipment • 2 large, outside pockets with Velcro fastening (Cat. No. 5182BLA) • Durable, double-stitched plastic bottom; Cat. No. 5180 is reinforced with 1/4" (.6 cm) plywood Webbing extends down side of bag from handles and shoulder strap for extra support and • durability (Cat. Nos. 5182BLA and 5181ORA) Wide opening steel frame is securely riveted in top of bag (Cat. No. 5180) • • Right-sized rain flap with Velcro fastening • Adjustable, padded shoulder strap included (Cat. Nos. 5182BLA and 5181ORA) ®
®
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Cat. No. 5216V
Test and Measurement
5182BLA
Power Tools and Accessories
5181ORA 5180
Cat. No. 5182BLA 5181ORA 5180
Number of Pockets 2 1 0
Color Black Orange Orange
Lifting, Pulling, and Structural
VELCRO® is a registered trademark of Velcro Industries B.V.
228
> 800-553-4676
Overall Length 24" (61 cm) 24" (61 cm) 24" (61 cm)
Overall Height 20" (50.8 cm) 20" (50.8 cm) 18" (45.7 cm)
Overall Width 10" (25.4 cm) 10" (25.4 cm) 10" (25.4 cm)
Pliers
Lineman/Utility Buckets and Bags
Strippers, Cutters, and Crimpers
Diameter 6.5" (16.5 cm)
Material No. 10 Canvas
Special Features Two Internal Pockets; Snap Hook
Overall Height 8" (20.3 cm)
5143
Tool Kits Jobsite Accessories
Diameter 7" (17.8 cm)
Safety, PPE and Comfort
Line-Hose Bag • No. 6 canvas with top ring and molded bottom • Large enough to accommodate several pieces of hose • Can also be used to raise protective rubber blankets that are rolled • Leather cuff extends 3" (7.6 cm) up the side • Polypropylene rope handle is reinforced with leather • Made in USA with global components Cat. No. 5110-48
Conduit Tools and Measurement
Cat. No. 5143
Drivers and Wrenches
Canvas Tapered-Bottom Bag • Two pockets are provided for small parts • Bottom is tapered so parts will stay in center • Equipped with a snap for hanging • Made in USA with global components
Overall Height 48" (121.9 cm)
Tool Storage Voice/Data/Video
Canvas Electrode Bags • Made of tough No. 4 canvas • Heat-resistant, hard leather bottom No. 5471FR is made of flame-resistant No. 4 canvas • Cat. which meets the performance requirement of NFPA -701 • Web loop for sliding over belt • Made in USA with global components
Test and Measurement
Cat. No. 5471 5471FR
Diameter 2.5" (6.4 cm) 2.5" (6.4 cm)
Front Depth 12" (30.5 cm) 12" (30.5 cm)
5471
Back Depth 15.5" (39.4 cm) 15.5" (39.4 cm)
5110-48
229
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
5471FR
Pliers Strippers, Cutters, and Crimpers
Aerial Aprons 10 hand tool pockets, 2 pouches, hammer loop and • Includes: two drill bit holders (Cat. Nos. 51829 and 51829M) • 2 pouches reinforced with heavy-duty rivets • Cat. No. 5144H hooks sold separately • Hot stick pocket (Cat. No. 51829MHS) magnet conveniently holds nuts, bolts and other • Sewn-in small metal objects (Cat. No.s 51829M and 51829MHS) 51829M, 51829MHS
51829M
51828
Cat. No. 51828 51829 51829M 51829MHS
Color Orange Orange Orange Orange
Number of Pockets 8 18 18 16
Magnetic No No Yes Yes
Swivel Snap Hook is NOT an occupational • This protective hook. NOT for human support
2012
swivel snap hook made • Bronze for use on canvas buckets • Maximum safe load 150 lbs (68 kg)
Cat. No. 2012
Throat Opening 21/32" (1.7 cm)
Overall Width 19.5" (49.5 cm) 24" (61 cm) 24" (61 cm) 32" (81.3 cm)
Overall Height 18" (45.7 cm) 23" (58.4 cm) 23" (58.4 cm) 27.5" (69.9 cm)
Hook for Aerial-Baskets and Buckets • All weather, durable, nylon 66 polymer manufacturers' aerial basket trucks • Most accommodate bucket hook hook for 5144 Series • Replacement Baskets and Buckets except 5144S 5144H
Overall Length 4.375" (11.1 cm)
Overall Width 1.625" (4.1 cm)
Cat. No. 5144H
Overall Length 5.5" (14 cm)
Overall Width 5.5" (14 cm)
Pole Sling • For use where a running loop wrap around pole is desired • Nylon web stitched with nylon thread
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Lineman Accessories
Power Tools and Accessories
5606
Cat. No. 5606
Overall Length 39" (99.1 cm)
Overall Width 2" (5.1 cm)
Rated Capacity Choke Hitch: 3000 lb (1361 kg), Basket Hitch: 4700 lb (2132 kg)
Lifting, Pulling, and Structural
WARNING: This is NOT an occupational protective device. NOT for human support.
230
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories
Our comprehensive line of verification VDV tools and testers were created to prep and connect and test network, phone, CATV, home theater, satellite, and security cables for residential or commercial systems.
Cable Connectors
Tool Storage
VOICE, DATA, AND VIDEO
Cable Preparation Cable Termination
VDV Kits
Power Tools and Accessories
Cable Testing
Test and Measurement
Cable Management
Voice/Data/Video
Punchdown Tools
Lifting, Pulling, and Structural
CABLE PREPARATION
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
• Durable high-carbon steel cutting blades automatically adjust to cable diameter; won't damage internal conductors • Finger loop design for smooth, easy rotation • Slide depth gauge pre-measures coax cable for quick, precise and repeatable 5/16" and 1/4" (7.9 mm and 6.4 mm) strips • Additional external blade in a structured design allows user to slit wire jacket for mid-span access or to open lengthwise (Cat. Nos. VDV110-261 and VDV110-295) • Cat. No. VDV110-095 features two stripping cavities: one for standard size cable and one for utility size cables
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
VDV110-295
VDV110-061
VDV110-261
VDV110-095
US Patent: D688927
Cat. No. VDV110-261 VDV110-061 VDV110-095 VDV110-295
Cable Size CAT3, CAT5/5e, CAT 6/6A RG59, RG6/6Q RG59, RG6/6Q, RG7, RG11 RG59, RG6/6Q; CAT3, CAT5/5e, CAT6/6A
Levels 1 2 2 Coaxial: 2, Twisted Pair: 1
Strip Dimensions Variable 0.3125" and 0.250" (7.94 and 6.35 mm) 0.3125" and 0.250" (7.94 and 6.35 mm) Coaxial: 0.3125" and 0.250" (7.94 and 6.35 mm), Twisted Pair: Variable
Handle Color Yellow/Blue Yellow/Black Yellow/Gray Yellow/Blue
CABLE TERMINATION
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Radial Strippers
Compression Crimper — Extended Reach, Multi-Connector (F, BNC, RCA)
• Optimized for confined-space and short cable installations and repairs • Stamped steel with cushion grips for durability and comfort extended length, universal plunger ensures optimized crimping • Adjustable, on multiple types of connectors • Open-channel design for easy insertion of all connector head styles • Integrated leverage point to assist F-connector installation markings and mm scale are lasered • Connector into tool for consistent crimping Cat. No. VDV211-100
232
Cable Size RG59, RG6/6Q, etc.
Connector Type F, BNC, RCA
www.kleintools.com > 800-553-4676
Overall Length 9" (22.9 cm)
VDV211-100
Pliers
Cable Termination
Strippers, Cutters, and Crimpers
Compact, F-Connector
• Fixed plunger allows quick, easy insertion and removal of cable and connector • Steel body with black-oxide finish for corrosion resistance and durability • Compact tool with integrated handle lock • Spring loaded return increases user comfort and ease of use Cable Size RG59, RG6/6Q
Connector Type Common F-Connectors
Overall Length 5.594" (14.2 cm)
VDV212-008-SEN
Conduit Tools and Measurement
Compression Crimper — Compact, Multi-Connector (F, BNC, RCA)
Cable Size RG59, RG6/6Q
Connector Type BNC, F and RCA
Tool Kits
• Adjustable universal plumber ensures accurate crimps on multiple types of connectors • Steel body with chrome finish resists corrosion and extends tool life • Open design for easy insertion, complete compression and simple removal of cable and connector • F/BNC/RCA gauge markings on tool for accurate positioning and quick adjustment of the plunger • Spring loaded return increases user comfort and ease of use Cat. No. VDV211-048
Overall Length 5.594" (14.2 cm)
VDV211-048
Safety, PPE and Comfort
Compression Crimper — Lateral, Multi-Connector (F, BNC, RCA)
Connector Type F, BNC and RCA
VDV211-063
Overall Length 6.25" (15.9 cm)
Tool Storage
Cable Size Minicoax, RG58, RG59, RG62, RG6/6Q, RG7, RG11, etc.
Jobsite Accessories
• One tool crimps most cable sizes • Heavy-duty zinc die-cast chassis for durable, long lasting performance cable selection wheel eliminates the need to change plunger • Unique tips, saving time and avoids losing parts • Open design for easy insertion, compression and removal of cable and connector • F/BNC/RCA gauge markings on tool for accurate positioning and quick adjustment of the plunger • Spring loaded return increases user comfort and ease of use • Integrated leverage point to assist connector installation Cat. No. VDV211-063
Voice/Data/Video
Ratcheting Pass-Thru™ Modular Crimper
TM
Cable Size CAT3, CAT5e, CAT6/6A
Connector Type RJ11 Standard RJ12 Standard RJ45 Klein Tools Pass-Thru™
Position/Pair/Conductors 4-Position, 1-Pair/2-Conductor, 4-Position, 2-Pair/4-Conductor 6-Position, 2-Pair/4Conductor, 6-Position, 3-Pair/6-Conductor, 8-Position, 4-Pair/8-Conductor
Power Tools and Accessories
Cuts & Strips Paired Conductor Data Cable (Round STP/UTP) Flat-Satin Phone Cable
VDV226-110
Overall Length 6.094" (15.5 cm)
233
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Test and Measurement
All-in-one tool cuts and strips STP/UTP paired-conductor data cable • and flat-satin phone cable with RJ11/RJ12 standard modular connectors, and crimps & trims • Crimps with Klein Tools RJ45 Pass-Thru connectors • Full-cycle ratchet mechanism ensures complete connector termination • Trims flush to end face of connector to eliminate unintended contact between conductors • On-tool wiring guide helps minimize wiring errors • Use with Klein Tools Pass-Thru™ Connectors REPLACEMENT • Not for use with standard (non pass-through) connectors BLADE KIT VDV999-076 • Replacement blades available (Cat. No. VDV999-076)
Cat. No. VDV226-110
Drivers and Wrenches
Cat. No. VDV212-008-SEN
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Cable Termination Compact Pass-Thru™ Modular Crimper
• Crimps and trims STP/UTP paired-conductor data cables with Klein Tools RJ45 Pass-Thru connectors • Trims flush to end face of connector to eliminate unintended contact between conductors • On-tool wiring guide helps minimize wiring errors • Fast, reliable RJ45 Pass-Thru™ modular crimp-connector installation for data applications • Use with Klein Tools Pass-Thru™ connectors • Not for use with standard (non Pass-Thru™) connectors • Replacement blades available (Cat. No. VDV999-078) TM
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Cat. No. VDV226-005
Cuts & Strips
–
Cable Size CAT5e, CAT6
REPLACEMENT BLADE KIT VDV999-078
Connector Type RJ45 Klein Tools Pass-Thru™
VDV226-005
Position/Pair/Conductors 8-Position, 4-Pair/8-Conductor
Overall Length 5.5" (14 cm)
Compact Ratcheting Modular Crimper All-in-one tool cuts and strips STP/UTP paired-conductor data • cable and flat-satin voice cable Crimps with RJ11/12 and RJ45 modular connectors • Full-cycle ratchet mechanism ensures complete connector termination • Direct lateral crimp action provides more even, precise contact • termination across all pins Compact, ergonomic design for natural, single-hand operation • On-tool working guide helps minimize wiring errors • Replacement blades available (Cat. No. VDV999-074) • Cat. No. VDV226-107
Cuts & Strips STP/UTP Paired-Conductor Data Cable Flat-Satin Phone Cable
Cable Size CAT3, CAT5e, CAT6
REPLACEMENT BLADE KIT VDV999-074 VDV226-107
Connector Type RJ11 RJ12 and RJ45 Standard
Position/Pair/Conductors 6-Position, 2 Pair/4-Conductor; 6-Position, 3-Pair/6-Conductor; 8-Position, 4-Pair/8-Conductor
Overall Length 5.25" (13.3 cm)
Ratcheting Modular Crimper
• All-in-one tool cuts and strips STP/UTP paired-conductor cable and flat-satin phone cable • Crimps RJ45, RJ11 and RJ12 modular connectors • Crimping dies are precision ground from high-carbon steel • Ratchet safety-release and a blade-guard on cutting and stripping knives reduce risk of injury • Full-cycle ratchet mechanism ensures complete connector termination • Not for use with AMP connectors • Replacement blade set available (Cat. No. VDV999-064) ®
REPLACEMENT BLADE KIT
VDV226-011-SEN
VDV999-064
Cat. No. VDV226-011-SEN
Cuts & Strips Paired Conductor Data Cable (Round STP/UTP) Flat-Satin Phone Cable
Cable Size CAT3, CAT5e, CAT6/6A
Connector Type RJ45, RJ11, RJ12 Standard
Position/Pair/Conductors 4-Position, 1-Pair/2-Conductor, 4-Position, 2-Pair/4-Conductor 6-Position, 2-Pair/4-Conductor, 6-Position, 3-Pair/6-Conductor, 8-Position, 4-Pair/8-Conductor
Overall Length 7.5" (19.1 cm)
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
AMP® is a registered trademark of TYCO, Inc.
Ratcheting Crimper Frame CATV, electrical, home theater, satellite and security system ratcheting crimper • Professional frame with optional dies is perfect for fast, reliable connector installations • Full-cycle ratchet action assures a complete, precise crimp every cycle • Preset tension for optimum performance • Ratchet mechanism is designed to prevent the release of the connector prior to full compression • Safety crimp release helps eliminate rejected terminations due to incorrect positioning • Steel body with black-oxide finish for corrosion resistance and durability • Thumb-screws secure die-sets for quick, easy changes • Optional, quick interchangeable die sets thumb and Phillips screw set available (see table) Cat. No. VDV200-010
234
Handle Color Black/Yellow
www.kleintools.com > 800-553-4676
Overall Length 8.75" (22.2 cm)
VDV200-010
NOTE: Use caution when tightening thumb screws to prevent thread damage/stripping and hand tighten only; do not over-tighten the thumb screws. Over-tightening thumb-screws can damage the tool and/or die set.
Pliers
Cable Termination
Strippers, Cutters, and Crimpers
Coaxial Hex-Crimp Die Sets
• For use with Klein's Ratcheting Crimper Frame (Cat. No. VDV200-010) Die Set
Nest Dimension
Cat. No.
Die Set
Cat. No.
Die Set
Nest Dimension
Replacement Screw Set (Thumb and Phillips)
N/A
VDV211-037
RG58/RG59/ 0.256"/ 0.319"/ RG6/RG62 0.068"/ 0.213"/ 6.50/ 8.10/ 1.73/5.41 mm
Nest Dimension
VDV211-041
RG58/RG59/ RG6/RG62
0.255"/0.213"/ 0.098"/0.068"/ 0.321" 6.48/ 5.41/2.49/ 1.73/8.15 mm
VDV212-034
CATV F Connectors RG59 RG6
0.255"/ 0.320"/ 0.350" 6.48/ 8.13/ 8.89 mm
VDV211-038
RG58/RG59/ 0.256"/0.068"/ RG6/RG62 0.213"/6.50/ 1.73/5.41 mm
VDV201-042
VDV205-035
Insulated Terminals, AWG 10-22
AWG 20-18/ 16-14/12-10 DIN 0.5-1.52.5 4 - 6 mm
RG174/RG179/ 0.042"/0.068"/ 0.078"/ 0.128"/ Belden 8218 and Fiber Optic 0.151"/0.178"/ 1.07/7.73/1.98/ 3.25/3.84/ 4.52 mm
VDV205-039
Pin Terminal Insulated or Non-Insulated Ferrules, AWG 12-22
VDV211-043
0.100"/0.128"/ RG8/RG11/ RG174/RG179/ 0.429" 2.54/ 3.25/10.90 mm RG213
VDV205-036
Non-Insulated Terminal or Open Barrel Terminal, AWG 10-20
AWG 20-18/ 16, 14/12-10 DIN 0.5-1.52.5/4 - 6 mm
VDV201-040
RG58/RG59/ 0.043"/ 0.068"/ RG62/RG174 0.100"/ 0.137"/ Fiber Optic 0.213"/ 0.255"/ 1.09/1.73/2.54/ 3.48/5.41/6.48 mm
VDV205-044
Non-Insulated AWG 18-16/14 Terminal, AWG /12-10/8 DIN 0.75-1.5/ 8-18 2.54/ 4-6/ 10 mm
Conduit Tools and Measurement
AWG 22/20/18/ 16/14/12 DIN 0.5/0.75/ 1.0/ 1.5/2.5/ 4 mm
Drivers and Wrenches
Cat. No. VDV999-033
Tool Kits
Connector Crimping Pliers Safety, PPE and Comfort
and seats UR/UY/UG insulation displacement connectors (IDC) • Crimps Scotchlok type connectors • Curved handles for greater control No. VDV026-049 cleanly strips 23-24 AWG wire and has grooved jaws for • Cat. wire wrapping, looping and twisting • Cat. No. D234-6C is spring-loaded for self-opening action ®
UG IDC
Jobsite Accessories
UR IDC
VDV026-049
UY IDC VDV826-604
D234-6
Jaw Length 2" (5.1 cm)
Jaw Width 0.7" (1.8 cm)
Jaw Thickness 0.4" (1 cm)
D234-6 D234-6C
1.094" (2.8 cm) 1.094" (2.8 cm)
0.688" (1.8 cm) 0.688" (1.8 cm)
0.375" (1 cm) 0.375" (1 cm)
Point Diameter 0.095" x 0.125" (2.41 mm x 3.17 mm) — —
Knife Length 0.44" (1.1 cm)
Handle Color Yellow
Handle Finish Plastic Dipped
Overall Length 6.8" (17.3 cm)
0.5" (1.3 cm) 0.5" (1.3 cm)
Yellow Yellow
Plastic Dipped Plastic Dipped
5.813" (14.8 cm) 5.813" (14.8 cm)
Scotchlok® is a registered trademark of 3M Corporation.
• Insulation displacement connector to add or terminate a telephone line • Gel-filled for moisture resistance • For use with Cat. Nos. VDV026-049, D234-6 and D234-6C crimping tools • Works With CAT3 cable • Works with solid conductor wire
• Two tools in one; saves space in your pouch end opens telephone box fasteners, the other end tightens nuts • One on binding-post terminals • The 7/16" socket has a black finish and the 3/8" socket has a silver finish Sockets are 1.25" (3.2 cm) deep to fit over long binding posts • and are thin-walled for easy access into tight areas • Hex-socket design enables using a wrench to obtain extra torque • High-impact, break-resistant handle for long and dependable service • Sockets are heat-treated, alloy steel
UY IDC
UR IDC
VDV826-604 [2 wire (26-22 AWG)]
VDV826-605 [3 wire (26-19 AWG)]
Cat. No.
Position & Contacts 2P2C 3P3C
Connector Color Yellow Red
Package Quantity 25 25
68005
Cat. No. 68005
Socket Size 3/8" and 7/16" Hex Nut
Handle Diameter 1" (2.5 cm)
Overall Length 7" (17.8 cm)
www.kleintools.com > 800-553-4676
235
Lifting, Pulling, and Structural
VDV826-604 VDV826-605
Connector Type UY UR
Power Tools and Accessories
Can Wrench
Test and Measurement
Insulation Displacement Connectors
Voice/Data/Video
Cat. No. VDV026-049
Tool Storage
VDV826-605
TOOLS
PUNCHDOWN
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort
Impact Punchdown Tool CAT3/CAT5e CAT6/CAT6A
• Use to punch data cables into 66/110 panels and blocks • Terminates and cuts wires in CAT3, CAT5e and CAT6/6A cable in one step • Traditional punchdown-style form with a cushioned, non-slip handle • Metal injection molding (MIM) blade for durability (included) • Provides precise, reliable connections every time • Spring loaded for fast, low effort seating and terminating • Bayonet style (twist & lock) socket accepts most manufacturers' blades Reach Blade (Cat. No. VDV427-110) for working on active panels • Extended with preexisting connections (sold separately) • Replacement blades available (Cat. No. VDV427-104)
VDV427-110
VDV427-300
Cat. No. VDV427-300 VDV427-104 VDV427-110
Description Impact Punchdown Tool, 66/110 Blade Dura-Blade™ 66/110 Cut Punchdown Blade Extended Reach Blade for Impact Punchdown Tool
Configuration 1 End 110 Terminate and Cut
Configuration 2 End Included Punchdown Tool, Extended Reach Blade, Spudger, Wire Pick 66 Terminate and Cut 1 Blade — 1 Blade
Punchdown Accessories
• Blades compatible with Klein punchdown tools and other bayonet style (twist & lock) socket tools • Precision ground cutting-edge for clean, precise wire termination (depending on blade type) • Terminate, and adjust cable in variety of cross-connect panels, blocks and keystone jacks high-carbon steel blades for durability and long life • Induction-hardened (Cat. Nos. VDV427-015-SEN, VDV427-016-SEN, VDV427-104) • Reversible blades with termination/cutting ends and termination only ends (depending on blade type) Pick (Cat. No. VDV327-103) is a professional pick/probe/spudger for precise maintenance • Wire of wires on blocks or jacks
VDV427-015-SEN
VDV427-016-SEN
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
VDV427-104
VDV427-104
Lifting, Pulling, and Structural
Power Tools and Accessories
VDV327-103
Cat. No. VDV327-103 VDV427-015-SEN VDV427-016-SEN VDV427-104
236
Description Wire Pick 110 Punchdown Blade 66 Punchdown Blade Dura-Blade™ 66/110 Cut Punchdown Blade
> 800-553-4676
Configuration End 1 Metal Hook End 110 Terminate 66 Terminate 110 Terminate and Cut
Configuration End 2 Non-Conductive Spudger End 110 Terminate and Cut 66 Terminate and Cut 66 Terminate and Cut
Pliers
Punchdown Tools
Strippers, Cutters, and Crimpers
Impact Punchdown Tool Kit
Conduit Tools and Measurement
Set Contains Impact Punchdown Tool Kit
VDV427-822
Cat. No.
Description
Configuration End 1
Configuration End 2
VDV427-821 VDV327-103 VDV427-104
Cushion-Grip Impact Punchdown Tool w/Dura-Blade™ Wire Pick Dura-Blade™ 66/110 Cut Punchdown Blade
110 Terminate and Cut Metal Hook End 110 Terminate and Cut
66 Terminate and Cut Non-Conductive Spudger End 66 Terminate and Cut
Safety, PPE and Comfort
Items also sold separately.
Jobsite Accessories
Punchdown Screwdriver Multi-Tool
Phillips Bits #1, #2
Slotted Bits 1/4" (0.6 cm), 3/16" (0.5 cm)
US Patent: 8856994
Hex Bits 3/8"
Other Bits 66/110 Terminate and Cut
Voice/Data/Video
Nut Driver Sizes 1/4", 3/8"
VDV001-081
Tool Storage
Terminate and cut wire in one step with 66/110 combination • cut-type punchdown blade with precision ground cutting edge • Non-impact wire termination • Machine-tooled steel bits for superior strength • Heavy-duty blade barrel provides storage for bits • Bayonet-style (twist & lock) socket accepts most manufacturers' punchdown blades • Cushion-Grip handle for greater torque and enhanced comfort • Tip-Ident™ for quick identification of tool
Cat. No. VDV001-081
Tool Kits
Cat. No. VDV427-822
Drivers and Wrenches
• 4-piece tool kit for termination of 66/110 panels, cross-connect systems and wall jacks Tool (Cat. No. VDV427-821) includes a "Hi/Lo" impact functionality to adjust compression • Punchdown force on various wire gauges, blocks and jacks (US Patent D718585) extra-long shaft for reaching into bulky/crowded blocks and a heavy-duty metal collar » Integrated, for strength and longevity » Cushion-Grip handle reduces hand fatigue and provides superior comfort Pick (Cat. No. VDV327-103) used to pick up, separate or remove wires, small components, • Wire covers or debris from panels, blocks or jacks » Features a metal hook end with non-conductive spodger and body to prevent shorts (Cat. No. VDV427-104) manufactured using a metal injecting molding (MIM) technology • Dura-Blade for better quality, durability and performance has both 110 and 66 cut/terminate edges for clean, accurate wire insertion and trimming and » Blade is compatible with most bayonet style (twist & lock) socket punchdown tools • Kit-exclusive Multi-Pocket Pouch features a metal belt clip and a reinforced puncture-resistant bottom
Overall Length 8" (20.3 cm)
Test and Measurement Power Tools and Accessories
237
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
CONNECTORS
CABLE
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
Twisted Pair Connectors data and • Professional-grade telephone plugs deliver consistent,
•
VDV826-600
VDV826-601
Safety, PPE and Comfort Jobsite Accessories Tool Storage
RJ11
Position & Contacts Connector Design Gold Plating Thickness (micro-inch) Cat. No. Pack Size: 10 Pack Size: 25 Pack Size: 50 Pack Size: 100 Pack Size: 200 Crimping Type Klein Crimping Tools
6P4C
STANDARD RJ12
RJ45 CAT5e
6P6C 1-Piece > 50μ"
RJ45 CAT6
RJ45 CAT5e
8P8C 1-Piece
PASS-THRUTM
RJ45 CAT6
RJ45 CAT6A UTP*
8P8C 1-Piece > 50μ"
3-Piece > 50μ"
VDV826-600
VDV826-704 VDV826-764
PASS-THRU™
VDV826-628 VDV826-601
RJ 45 CAT6A STP** 8P8C 1-Piece > 50μ"
VDV826-728
VDV826-729
VDV826-702
VDV826-703
VDV826-704
VDV826-705
VDV826-762 Modular Plug Connector
VDV826-763
VDV826-764
VDV826-754
VDV826-603 VDV826-602 VDV826-611
VDV226-011-SEN, VDV226-107
VDV226-110, VDV226-005
* Unshielded Twisted Pair **Shielded Twisted Pair
Strain Relief Cable Boots
Standard Compression Connectors
• • • •
• Full ferrule design • Solid brass construction with nickel-plated finish • Best choice for outdoors and satellite dishes
Keep connectors on CAT5e and CAT6 cable and protect against broken tabs that can cause connector failure Sold in a 5-color assortment to color-code cables for easy identification Protect latch from damage Flexible ABS plastic material does not damage cables
Cat. No. VDV812-623 VDV812-624
Connector Type F-Connector F-Connector
Cable Type RG6 RG6
Full ferrule
Package Quantity 10 50
VDV812-623
Push-On Connectors
Test and Measurement
Voice/Data/Video
Connector Type
VDV826-702 VDV826-728 VDV826-762
VDV826-628
PHONE
• Patented, tool-less, easy grip design • Fits most major brands • For indoor use only Cat. No. VDV812-627
Power Tools and Accessories Lifting, Pulling, and Structural
VDV826-703 VDV826-729 VDV826-763
VDV826-603
VDV826-705 VDV826-754
Tool Kits
•
reliable performance Featuring thick 50 micro-inch minimum gold plating on 3-pronged contacts for solid and stranded wire Durable connector housings for a sure connection each and every time
VDV824-650
Connector Type F-Connector
Crimping Type Push-on
VDV812-627
Cable Type RG6/6Q
Package Quantity 10
F-Splice Adapter 3 GHz
• Patented gripping mechanism for optimal signal strength Cat. No. VDV824-650
238
Connector Type RJ45
Cable Type CAT5e, CAT6
Package Quantity 100
www.kleintools.com > 800-553-4676
Cat. No. VDV814-609
Package Quantity 10
VDV814-609
Pliers
Voice/Data/Video • Fit all manufacturers' diameter variations within a cable series • Fit difficult to work with multi-shield and plenum cables • For indoor use only Package Quantity 10 50 10 50 10 35 10 35
VDV812-615
VDV813-616
F • RG6/6Q
BNC • RG6/6Q
VDV812-606
VDV813-607
Compact ferrule
Jobsite Accessories Tool Storage
insulated staples for Voice, Data, Video, NM-B (Romex™) and • Drives other nonmetallic (type NM) sheathed cable • Adjustable to three sizes of staples: 1/4", 5/16", and 19/32" • Forward action for stability and single-handed operation • Channel face guides and protects cable • Cast aluminum body for durability • Adjustable force setting lever • Two-level staple guide opening for small and large cable and staple sizes • Ergonomic, Cushion-Grip handle • Jam resistant mechanism • Convenient clip for attaching stapler to belt or tool bag. Clip can be mounted to either side of the stapler • UL-listed insulated staples secure flat and round cables. Sold separately in 300 qty. packs
Voice/Data/Video
Insulated Staples
450-001
1/4" x 5/16" (6 mm x 8 mm)
450-002
5/16" x 5/16" (8 mm x 8 mm)
450-003
19/32" x 11/32" (15 mm x 9 mm)
450-100
Leg Length
For Use With • CAT3/5e data cable • Speaker Wire 11/16" (17 mm) • CAT3/5e/6/6A data cable • RG59/6/6Q coax cable • CAT3/5e/6/6A (x2, x3) data cable 7/8" (22 mm) • RG59/6/6Q (x2) coax cable • NM-B (Romex®) 14-3, 14-3G, 12-3
Romex® is a registered trademark of Southwire Company.
Power Tools and Accessories
Cable Opening Size
Test and Measurement
Description Loose Cable Stapler
Cat No.
Safety, PPE and Comfort
Loose Cable Stapler and Staples
Cat. No 450-100
Tool Kits
CABLE MANAGEMENT
Cable Type RG59 RG59 RG6/6Q RG6/6Q RG59 RG59 RG6/6Q RG6/6Q
BNC • RG59
Conduit Tools and Measurement
Connector Type F-Connector F-Connector F-Connector F-Connector BNC Connector BNC Connector BNC Connector BNC Connector
F • RG59
Drivers and Wrenches
Cat. No. VDV812-615 VDV812-618 VDV812-606 VDV812-612 VDV813-616 VDV813-619 VDV813-607 VDV813-613
Strippers, Cutters, and Crimpers
Universal Compression Connectors
450-001
450-002
450-003
239
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Cable Management
Portable Hook & Loop Tape Dispenser
• Dispenser pays out and cuts hook & loop tape to create custom length cable ties hook & loop tape material securely holds large bundles of wire and cable, yet • Strong is flexible and supple to avoid causing adverse damage to conductors or jackets cutter designed to efficiently cut the hook & loop tape with easy single • Integrated handed cutting action • Attach to belt with heavy-duty clip for portability and on the go flexibility to steel surfaces such as tool chests, cabinets, or panels with the integrated, • Mount powerful rare earth magnets • Use integrated keyholes for versatile screw mounting to non-magnetic surfaces a 12-ft roll of black, 3/4" wide tape to get started. Tape can be easily • Includes replaced when depleted. • 25-ft replacement rolls available (sold separately) • Replacement cutting blade (Cat. No. 450-999) available (sold separately) Cat. No 450-900 450-950 450-960
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
450-999
Description Pack Size Hook & Loop Tape Dispenser, Versatile Wire & 1 Cable Ties, Custom Length Hook & Loop Roll, 3/4" width, 25' length, (Black) 1 Hook & Loop Roll, 3/4" width, 25' length, (White) 1 Blade Assembly for Klein's Hook & Loop 1 Dispenser (450-900)
450-950
450-960
450-900
Stretch Cable Tie Roll roll can be easily cut to the desired length to suit the size of • 75-ft the cable bundle being organized • Design features screw holes for optional permanent mounting • Sold in convenient dispenser box
Cat. No 450-700
Description Stretch Cable Tie Roll
Pack Size 75-ft
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
450-700
Cable Clips
• Mount to a variety of surfaces • Available in 10 packs of either single or triple cable clips adhesive backing for temporary or semi-permanent • Includes mounting and screws that can be optionally used for permanent mounting 450-410
Cat. No 450-400 450-410
240
Description Cable Mounting Clips, Single Hole Cable Mounting Clips, Triple Hole
> 800-553-4676
Pack Size 10 10
450-400
Pliers
Cable Management
Strippers, Cutters, and Crimpers
Cable & Wire Management Sleeves
• Sturdy, stretchable material with hook and loop seal • Adjustable hook and loop design offers a strong seal at any diameter feature runs the entire inner surface allowing sleeve to be • “Loop” sealed to any diameter • 3-ft lengths can be cut to desired length
Drivers and Wrenches
450-330
450-320
Conduit Tools and Measurement
Cat. No
450-330
Pack Size 2
Tool Kits
450-320
Description Cable and Wire Management Sleeves,1.25" Diameter, 3' Long Cable and Wire Management Sleeves, 1.75" Diameter, 3' Long
2
Safety, PPE and Comfort
Hook & Loop Cinch Straps, 6", 8" & 14" Multi-Pack
Jobsite Accessories
loops run the entire length of the strap to cinch at any • Durable point for added flexibility lengths offer a wide range of uses for cables, • Three wires and other items to be bundled • Premium metal loop to tighten hook and loop material • Pack includes 2 of each length (6", 8" and 14") 450-600
Description Hook & Loop Cinch Straps, 6", 8" & 14" Multi-Pack
Tool Storage
Cat. No 450-600
Pack Size 6
Voice/Data/Video
Cable Zip Ties
Description Cable Ties, 7.75" length (Black) Cable Ties, 11.5" length (Black)
Pack Size 100 100
Power Tools and Accessories
Cat. No 450-200 450-210
Test and Measurement
cable ties help manage messy cable and other items; • Multi-purpose perfect for jobsite, home, office or workshop • 50-lb (23 kg) tensile strength • Self-locking with durable teeth for strong hold • Angled tip for easy feed • For indoor or outdoor use - UV resistant • Made of high quality nylon for strength
450-200
www.kleintools.com > 800-553-4676
241
Lifting, Pulling, and Structural
450-210
KITS
VDV
Pliers
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage
data and coaxial • For cable installations VDV001-833
VDV026-831 Cat No.
Description
VDV026-831
VDV011-832
VDV001-833
Free-Fall Snip – Stainless Steel
Stainless steel blades maintain blade durability and sharpness when cutting 19 and 23 AWG wire
•
—
•
63020
Multi-Cable Cutter Klein-KurveTM
Cutter has a wide range of blades designed to cut various types of cable including solid and stranded copper wire, RG-59, RG6Q and RG-62 coaxial cable as well as other conductors
—
•
•
VDV000-133
VDV ProTechTM Transport
Lightweight tool case with 12 organizational compartments for small parts and a large, open section to hold hand tools
•
•
•
VDV110-061
Coax Cable Stripper – 2-Level, Radial
Provides one step, two-level stripping: 5/16" (7.9 mm) and 1/4" (6.4 mm)
—
•
•
VDV211-048
Compression Crimper – Compact, Multi-Connector
Crimps compression (F, BNC, RCA) connectors to coaxial cable
—
•
—
VDV211-063
Compression Crimper-Lateral, Multi-Connector
One tool crimps most compression (F, BNC, RCA) connectors to most coaxial cables including Mini-Coax, RG58, RG59, RG62, RG6Q, RG7 and RG11
—
—
•
VDV226-107
Compact Ratcheting Modular Crimper
All inclusive tool cuts, strips and crimps data cables and modular data plugs
•
—
•
VDV812-606
Universal F Compression Connector – RG6/6Q
Patented universal sleeve technology installs up to 5X faster and fits all diameter variations of RG6/6Q cable
—
Universal F Compression Connector – RG59
Patented universal sleeve technology installs up to 2X faster and fits all diameter variations of RG59 cable
—
F Compression Connector – RG6
All metal construction with dual O-ring to seal out moisture – satellite provider approved
—
Universal BNC Compression Connector – RG6/6Q
Patented universal sleeve technology installs up to 5X faster and fits all diameter variations of RG6/6Q cable
—
Universal BNC Compression Connector - RG59
Patented universal sleeve technology installs up to 2X faster and fits all diameter variations of RG59 cable
—
Telephone Plug RJ11 - 6P6C
Thick 50 micro-inch gold-plated and 3-pronged contacts with durable housing – for 1, 2 or 3 line telephones
25-Pack
Modular Data Plug – RJ45 - CAT6
Thick 50 micro-inch gold-plated and 3-pronged contacts with durable housing — 8 position, 8 contact 3-piece design for solid and stranded wire
25-Pack
Modular Data Plug – RJ45 - CAT5e
Thick 50 micro-inch gold-plated and 3-pronged contacts with durable housing — 8 position, 8 contact for solid or stranded wire
VDV812-615
Test and Measurement
VDV812-623
VDV813-607
VDV826-600
VDV813-616
VDV826-603
VDV826-628
Lifting, Pulling, and Structural
Product
VDV011-832
2100-8
Power Tools and Accessories
Voice/Data/Video
ProTech™ Kits
242
www.kleintools.com > 800-553-4676
• • • 10-Pack (x2)
•
•
10-Pack (x2)
10-Pack (x2)
•
•
10-Pack
10-Pack
•
•
10-Pack (x2)
10-Pack (x2)
•
•
10-Pack
10-Pack
•
•
10-Pack
10-Pack
—
—
—
• 25-Pack
• 25-Pack
• 10-Pack (x2)
Pliers
VDV Kits
Strippers, Cutters, and Crimpers
Coax Cable Installation Kit with Hip Pouch all the tools needed to cut, strip • Includes and crimp compression F-Connectors to RG59/RG6/6Q cables
• •
Kit Contains Coax Cable Installation Kit with Hip Pouch Description
VDV110-061 VDV212-008-SEN 63020 Kit exclusive
Coax Cable 2-Level Radial Stripper Compact Compression Crimper, F-Connector Multi-Cable Cutter Klein-Kurve™ Molded hip pouch with belt clip
needed to prep and connect RG59/RG6/6Q • Everything coax cables with F-Connectors a cable cutter, radial stripper, crimper, universal • Includes connectors and a zipper pouch for storage Cutter has precision shear-type blades for easier • Multi-Cable cutting and double-dipped comfort grips with curved handles Radial Stripper with 2-level, 1 step prep has durable high-carbon • steel pre-set cutting blades for precise, accurate cable stripping crimps compression F-Connectors to coaxial cable; fixed plunger • Crimper allows quick, easy insertion and removal of cable and connector 6 Universal RG6/6Q Compression F-Connectors • Includes (also available as a 10-pack, Cat. No. VDV812-606) • Polyester zipper bag keeps all components together Cat. No. VDV026-211
Safety, PPE and Comfort
Cat. No.
Coax Cable Installation Kit with Zipper Pouch
Tool Kits
Cat. No. VDV011-852
VDV026-211
Kit Contains Coax Cable Installation Kit with Zipper Pouch Description
63020 VDV110-061 VDV212-008-SEN VDV812-606 Kit exclusive
Multi-Cable Cutter Klein-Kurve™ Coax Cable 2-Level Radial Stripper Compact Compression Crimper, F-Connector Universal Compression F-Connectors RG6/6Q 10-Pack Sturdy zippered pouch
Voice/Data/Video
connections (good/open/short) F-Connectors feature • Push-On patented cable grip design for easy installation and strong hold with no tool required
VDV002-820
Kit Contains Coax Cable Installation & Test Kit
Cat. No. VDV002-820
Kit Contains Coax Push-On Connector Installation and Test Kit
Cat. No.
Description
Cat. No.
Description
VDV212-008-SEN VDV110-061 VDV512-100 VDV812-606
Compact Compression Crimper, F-Connector Coax Cable 2-Level Radial Stripper Coax Explorer™ 2 Tester Universal Compression F-Connectors RG6/6Q 10-Pack
VDV110-061 VDV512-100 VDV812-627
Coax Cable 2-Level Radial Stripper Coax Explorer™ 2 Tester Push-On F-Connectors RG6/6Q 10-Pack
243
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Cat. No. VDV002-818
Test and Measurement
• Includes tools needed to prepare, connect and test coax cables • Radial Stripper designed for easy single operation cable preparations • Crimper crimps compression F-Connectors to coaxial cable quickly and reliably Coax Explorer™ 2 Tester tests and verifies coaxial • cable connections (good/open/short) Universal Compression F-Connectors - RG6/6Q: Patented design installs up to 5X faster •
Tool Storage
Coax Installation & Test Kit
tools needed to prepare • Includes and test push-on coax cables Stripper designed for easy • Radial single operation cable preparations Explorer™ 2 Tester • Coax tests and verifies coaxial cable
Jobsite Accessories
Cat. No.
Coax Push-On Connector Installation & Test Kit
VDV002-818
Conduit Tools and Measurement
•
comfort grips with curved handles Radial Stripper with 2-level, 1 step prep has durable high-carbon steel pre-set cutting blades for precise, accurate cable stripping Compression Crimper features a fixed VDV011-852 plunger for quick, easy insertion and removal of cable and connector Works with many commonly available compression F-Connectors
Drivers and Wrenches
molded freestanding hip pouch with • Custom durable metal belt clip Multi-Cable Cutter has precision shear-type • blades for easier cutting and double-dipped
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Twisted Pair Installation Kit with Zipper Pouch
• cables, plus a zippered pouch to keep everything together Stripper (Cat. No. VDV110-261) with durable high-carbon steel blade • Radial automatically adjusts to cable diameter to avoid damaging conductors • Ratcheting Modular Crimper/Stripper (Cat. No. VDV226-011) cuts, strips and crimps data cables 110-Type Punchdown Tool with Klein's exclusive DuraBlade™ precision cutting edge for clean, • accurate wire termination • RJ45-CAT5e Modular Data Plugs (6-Pack) • Polyester zipper bag keeps everything together • RJ45-CAT5e Modular Data Plugs also available as a 25-Pack (Cat. No. VDV826-603) Cat. No. VDV026-212
Tool Kits
Conduit Tools and Measurement
VDV Kits
Kit Contains Twisted Pair Installation Kit with Zipper Pouch Cat. No.
Description
VDV110-261 VDV226-011-SEN Kit exclusive Kit exclusive Kit exclusive
Twisted Pair Radial Stripper Ratcheting Modular Crimper/Stripper 110 Punchdown Tool Modular Data Plugs RJ45 CAT6, 6-Pack Sturdy Zippered Pouch
VDV026-212
• Includes the tools needed to prepare, connect and test modular data cables • Durable nylon tool pouch designed specifically for modular plug installation tools • 2 additional pockets hold a screwdriver and common AA battery flashlights • Pouch includes a closeable pocket that will hold up to 25 RJ45 plugs (not included) • Tunnel-loop accommodates up to 2" (5.1 cm) belt
Jobsite Accessories
Safety, PPE and Comfort
LAN Installer Starter Kit - Modular
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Cat. No. VDV026-812
Kit Contains LAN Installation and Tester Starter Kit Cat. No.
Description
2100-8 VDV226-011-SEN VDV526-052 98554 Kit exclusive
Free-Fall Snip Stainless Steel Ratcheting Modular Crimper/Stripper LAN Scout™ Jr. Continuity Tester Fine Point Permanent Markers, 2-Pack 5-Pocket Nylon Pouch Plus Closeable Consumables Pocket VDV026-812
Modular Installation Kit
• Modular Crimper/Stripper cuts, strips and crimps paired-conductor • Ratcheting data cables (RJ11/RJ12, RJ45) Modular Data Plugs (6-Pack): Thick 50 micro-inch gold plating and • RJ45-CAT5e 3-pronged contacts with durable housing - 8 position, 8 contact for data cables 6P6C Telephone Plugs: Thick 50 micro-inch gold plating and 3-pronged • RJ11 contacts with durable housing - for 1, 2 or 3 line telephones Cat. No. VDV226-817
244
Kit Contains Modular Installation Kit Cat. No.
Description
VDV226-011-SEN VDV826-628 Kit exclusive
Ratcheting Modular Crimper/Stripper Modular Data Plugs, RJ45, CAT5e, 10-Pack Telephone Plugs, RJ11, 10-Pack
www.kleintools.com > 800-553-4676
VDV226-817
Pliers
VDV Kits
Strippers, Cutters, and Crimpers
VDV Apprentice Tool Set, 6-Piece
Conduit Tools and Measurement
Cat. No. VDV001-819
Drivers and Wrenches
• All the essential tools for the VDV professional • Versatile Scout™ Pro 3 Tester locates and tests coax, data and telephone cables Modular Crimper cuts, strips and crimps Twisted Pair, Ethernet, RJ45 • Ratcheting voice and data cables Crimper crimps compression F, BNC, and RCA connectors to inside • Multi-Connector (premises) coaxial cable: Mini-coax, RG58, RG59, RG6, RG62, and RG6QS • Snip features high carbon steel blades to maintain blade durability and sharpness Cable Stripper features exclusive sliding cable stop pre-measures cable for fast, • accurate and repeatable strips Punchdown • keystone jacksTool terminates cable in a variety of cross-connect panels, blocks and
Kit Contains VDV Apprentice Tool Kit, 6-Piece Impact Punchdown Tool, 66/110 Blade Ratcheting Modular Crimper/Stripper Compact, Multi-Connector Compression Crimper Cable Tester Kit with Scout™ Pro 3 Tester, Remotes, Adapter, Battery Free Fall Snip, Carbon Steel Coax Cable 2-Level Radial Stripper Carrying Case
21010-6-SEN VDV110-061 Kit exclusive
VDV001-819
Safety, PPE and Comfort
Description
VDV427-300 VDV226-011-SEN VDV211-048 VDV501-851
Tool Kits
Cat. No.
Jobsite Accessories
LAN Installer Starter Kit - Punchdown Tool Storage
• Includes the tools needed to prepare and connect 66 type and 110 type punchdown terminal blocks • Durable nylon tool pouch designed specifically for punchdown installation tools • Two additional pockets hold a screwdriver and common AA battery flashlights • Tunnel-loop accommodates up to 2" (5.1 cm) belt
Voice/Data/Video
Cat. No. VDV027-813
Kit Contains LAN Installer Starter Kit, Punchdown Description
2100-8 VDV427-300 VDV427-015-SEN 98554 Kit exclusive
Free-Fall Snip Stainless Steel Impact Punchdown Tool, 66/110 Blade 110 Punchdown Blade Fine Point Permanent Markers, Pk 2 Multi-Pocket Belt Mount Pouch
Test and Measurement
Cat. No.
VDV027-813
Power Tools and Accessories
245
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement Tool Storage
Jobsite Accessories
Safety, PPE and Comfort Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
CABLE TESTING
Voice/Data/Video
Pliers
Cable Testing
Strippers, Cutters, and Crimpers
Coax Explorer™ 2 Testers
• Test coaxial cable and map up to 4 locations • Simple push button operation Easy to read LED panel indicates PASS, OPEN or SHORT • conditions, simplifying cable identification 2 Replaceable AAA Alkaline batteries, included • Push-on remotes for ease of use • Remote Kit (Cat. No. VDV512-101) includes a removable • holder with 4 color coded remotes
VDV512-100
Drivers and Wrenches
REMOTE REPLACEMENT KIT
Cat. No. VDV512-100 VDV512-101
Description Cable Type Coax Explorer™ 2 Tester with Red Remote RG59, RG6/6Q, RG7, RG11 Coax Explorer™ 2 Tester with Remote Kit RG59, RG6/6Q, RG7, RG11
Test-n-Map ID Remotes (1) Red Remote (Included) 4 (Included)
VDV512-110
Remote Kit for Coax Explorer™ Tester
4 (Included)
—
VDV512-101
Connection & Adapter Types
Coax F Adapters
LAN Scout™ Jr. 2 Cable Tester
Batteries 2x AAA
Display LCD
Included Tester, Remote, 2x AAA batteries
Tool Storage
Description Remote LAN Scout™ Jr. 2 Tester 1 Replacement Remote for LAN Scout™ Jr. 2 Tester
Jobsite Accessories
Cat. No. VDV526-200 VDV999-200
Safety, PPE and Comfort
• Cable tester for data (RJ45) terminated cables and patch cords • Large backlit LCD for low lit areas displays pin to pin wiremap results • Test for Open, Short, Miswire or Split-Pair faults, Cross-over and Shielded • Intuitive user interface features three buttons with simple, easy-to-identify test responses • Tone on single wire, wire pair or all 8 conductor wires • Multiple style tone generator (solid / warble); requires probe Cat. No. VDV500-123 (sold separately) • Auto Power-Off feature; 10-minutes in test mode, 60-minutes in tone mode • Soft, slip-resistant, rugged overmold for easy gripping and durability • Replaceable 2 x AAA batteries (included) • Replaceable self-storing remote (included) • Replacement remote available; sold separately (Cat. No. VDV999-200)
VDV526-200
Voice/Data/Video
LAN Explorer™ Data Cable Tester
Test and Measurement
• Single button testing of RJ11, RJ12 and RJ45 terminated voice and data cables • Tests CAT3, CAT5e and CAT6/6A cables • Fast LED responses indicate cable status (Pass, Miswire, Open-Fault, Short-Fault, and Shield) • Test remote stores securely in tester body • Compact tester easily fits in your pocket • Auto Power-off feature to conserve battery life (9V battery included) • Low battery indicator
Power Tools and Accessories
REMOTE REPLACEMENT VDV999-150
Cable Type CAT3, CAT5e, CAT6/6A
Connector Type RJ11, RJ12, RJ45
Remote 1
Batteries 1 x 9V
Display LED
VDV526-100
Included Tester, Remote, 9V Battery
www.kleintools.com > 800-553-4676
247
Lifting, Pulling, and Structural
Cat. No. VDV526-100
Tool Kits
Included Tester, Batteries, Red Remote Tester, Batteries, 4 Colored Push-on Remotes, F-adapter, Snap-on Remote Holder 4 Colored Push-on Remotes, F-Adapter, Snap-on Remote Holder
Conduit Tools and Measurement
VDV512-110
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Cable Testing Scout™ Pro 3 Tester Kits
• Test voice (RJ11/12), data (RJ45) and video (coax F-connector) cables • Measure cable length (up to 2,000 feet) • Backlit LCD screen displays cable length, wiremap, cable ID and test results • Detect, identify and test Power over Ethernet (PoE) • Test for Open, Short, Miswire or Split-Pair faults • Hub Blink mode to identify port location on a hub or a switch • Includes voltage warning, shield detection, auto power-off and low battery indicator • Remote options include up to 12 Test + Map remotes and up to 18 locator remotes • All kits include a Self-Storing Test + Map Remote • These models replace the Scout™ Pro 2 series of tester kits TM
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
TM
VDV770-850 Test + Map™ Remote Upgrade Kit
VDV770-851 Test + Map™ Remote Expansion Kit
Scout™ Pro 3 Tester
–
–
Self-Storing Remote (#1)
–
–
#2 - #6
#2 - #6
#7 - #12
–
–
–
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Included
Cat. No.
VDV501-851 Starter Kit
VDV501-852 Locator Remote Kit
VDV501-853 Smart Remote Kit
Test + MapTM Remotes
–
–
RJ45 Locator Remotes
5
18
F-Coax Locator Remotes
5
18
Coax F Adapter (female-to-female)
1
2
7
6
6
Coax Barrel Adapters (male-to-female)
–
–
7
2
–
RJ45 Jumper Cables (6”)
–
2
7
7
6
RJ11 Jumper Cables (6”)
–
2
2
2
2
RJ12 Jumper Cables (6”)
–
2
2
2
2
–
–
VDV770-125
VDV770-127
9V Alkaline Battery Carrying Case
248
–
www.kleintools.com > 800-553-4676
VDV770-126
VDV770-125
Pliers
Cable Testing VDV501-852 Locator Remote Kit
VDV501-853 Test + MapTM Remote Kit
Backlit LCD Measures Cable Length
Drivers and Wrenches
2000 ft. (610 m)
Tests RJ45 8-wire cables Tests RJ11 4-wire Cables / RJ12 6-wire cables
Conduit Tools and Measurement
Tests F-connector terminated coaxial cables Tests TIA-568A/B & Crossover
Pass
Wiremap Display on LCD
PoE
–
Tool Kits
Power over Ethernet (PoE) Testing - displays voltage and wiring (A/B)
Strippers, Cutters, and Crimpers
VDV501-851 Starter Kit
FEATURES
Detects Open Fault Detects Short Fault
Safety, PPE and Comfort
Detects Miswires Detects Split-Pairs
Replacement parts
5
ID
included
included
18
sold separately
sold separately
sold separately
5 (#2 - #6)
Jobsite Accessories
Cable Identification Remotes Supports up to 19 (sold separately) Self-Storing Test + MapTM Remote (#1) Test + MapTM Remotes Supports up to 12 (sold separately)
included
Tool Storage
Multiple Style Tone Generator† VDV512-056
VDV526-055
Hub Blink VDV726-125
Auto Power Off
APO Voice/Data/Video
Low Battery Indicator Voltage Warning VDV770-125
S
Shield Detection
Test and Measurement
Battery Type (included)
9V alkaline
*Requires an analog tone tracing probe (sold separately).
VDV770-126
Description
VDV770-125 VDV770-126 VDV770-127 VDV512-056 VDV526-055 VDV726-125
Replacement Case for Scout™ Pro 3 Test + Map™ Remote Kit (VDV501-853), Upgrade Kit (VDV770-850) Replacement Case for Scout™ Pro 3 Tester Locator Remote Kit (VDV501-852) Replacement Zipper Bag for Test + Map™ Remote Expansion Kit (VDV770-851) CoaxMap™ Kit (include 19 coax locator remotes) LANMapTM Kit (include 19 RJ45 locator remotes) Universal RJ11/RJ12 Jumper Cable
Power Tools and Accessories
Cat. No.
VDV770-127
249
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
Cable Testing Commander™
Features
test and measure coaxial, data (RT45) • Locate, and telephone (RJ11/RJ12) cables cable length and Distance-to-Fault with • Measure Time Domain Reflectometry (TDR) technology and identify cables with location ID remotes, • Locate Test-n-Map™ remotes, Link Light and Tone Generator† • Detect, identify and test Power-over-Ethernet (PoE) • Perform active network (Ethernet) testing up to 256 cable or network tests • Store that can be exported to print reports • Tester battery life of 20 hours active and 4 years standby • Probe battery life of 25 hours active and 4 years standby
• •
RJ-45 8-Wire Cables F-connector Coaxial Cables
with adapter
Telephone Cables Wiremap Open Fault Short Fault Miswire Fault Split-Pair Fault Pass
TIA-568A/B & Crossover/Uplink Active Ethernet - Detects link speed and capabilities Single-End Cable Testing Test-n-Map™ Remote (Two End Testing) - Test and Identify location in one step with remote
PoE
Tool Kits
TDR
Power-Over-Ethernet Testing Time Domain Reflectometry - Length Measurement Method
Link Light
Safety, PPE and Comfort
S
Cable Identification (Coaxial & Data)
Low Battery Indicator
Supports up to 20
•
Print / Export Custom Reports Tones*(Down to Single Conductor/Pair/Cable)
Jobsite Accessories
• •
256
Store Test Results
Tool Storage
• •
• • •
Shield Detection Voltage Warning
Ft./m Apo
Supports up to 8
1500' / 457 m
Measures Cable Length ±(5% + 1 Ft.) ±(5% + 0.3 m) Accuracy/ Measurement Resolution
ID
• • • • • • • •
4
Color LCD Display
2.7" (68.6 mm)
Multiple Languages
ENG · ESP · FRA
• • •
Imperial or Metric Results Auto Power Off Customizable Setup USB interface (for PC connection)
MICRO
•
Test and Measurement
Voice/Data/Video
Upgradeable Firmware (via internet download and pc connection)
VDV501-828
Power Tools and Accessories
Commander™ Kits Cat. No. VDV501-828 VDV501-829
Cable Type
Test-n-Map Location ID ID Remotes RG59, RG6/6Q, RG7/11, 1 5 CAT3, CAT5, CAT6/6A RG59, RG6/6Q, RG7/11, 1 20 CAT3, CAT5, CAT6/6A
Batteries 6 x AA
LCD
Commander: 6 x AA Alkaline Probe: 1 x 9V Alkaline
LCD
Lifting, Pulling, and Structural
† Functionality requires an analog tone tracing probe VDV500-060 (Included with Cat. No. VDV501-829).
250
www.kleintools.com > 800-553-4676
Display
VDV501-829
Included Tester, Test-n-Map Remote #1, (5) LanMap ID Remotes, (5) CoaxMap ID remotes, USB/ RJ12/RJ45 Test Cables, Coax Adapter, (6) AA Batteries, Carrying Case Tester, Probe, Test-n-Map Remote #1, (20) LanMap ID Remotes, (20) CoaxMap ID remotes, USB/RJ12/RJ45 Test Cables, Coax Adapter, (6) AA Batteries, 9V Battery, Carrying Case
Pliers
Cable Testing
Strippers, Cutters, and Crimpers
Test-n-Map™ Remote Kit for Commander™ Series
• Test, map and identify a location in a single step • Cuts testing and identification time in half • Test and identify up to eight locations at once Included (7) Test-n-Map™ Remotes, (8) Coax Push-on F Adapters, (8) RJ45 Jumper Test Cables, (2) RJ11/RJ12 Jumper Cables, Verification Cable, Zipper Pouch
VDV770-834
Drivers and Wrenches
Cat. No. VDV770-834 Tester sold separately.
Conduit Tools and Measurement
Test + Map™ Remotes
For Use With
Scout™ Pro Series (VDV501-851; -852; -853; -823; -824; -825; -826; -827) Commander™ Series (VDV501-828; -829)
Cat. No. VDV501-219 VDV501-220 VDV501-221 VDV501-222
Description Test + MapTM ID Remote #9 Test + MapTM ID Remote #10 Test + MapTM ID Remote #11 Test + MapTM ID Remote #12
For Use With Scout™ Pro Series (VDV501-851; -852; -853; -823; -824; -825; -826; -827)
Jobsite Accessories
Description Test + Map™ ID Remote #1 Test + Map™ ID Remote #2 Test + Map™ ID Remote #3 Test + Map™ ID Remote #4 Test + Map™ ID Remote #5 Test + Map™ ID Remote #6 Test + Map™ ID Remote #7 Test + Map™ ID Remote #8
LanMap™ Kit and CoaxMap™ Kit
For Use With Scout™ Pro Series (VDV501-851; -852; -853; -823; -824; -825; -826; -827) Commander Series (VDV501-828; -829)
VDV512-056
VDV526-055
Tone & Probe Test and Trace Kit
Batteries 4 x AAA
Power Tools and Accessories
Cat. No. VDV500-705
Test and Measurement
• Easy-to-use tone generator traces wire when used with included probe • Responsive probe with durable, non-metallic, conductive tip • Toner and probe together perform pin-to-pin wire map test • Alligator clips for use on unterminated wires • RJ11 plug easily connects to RJ11/RJ12 voice/telephone jacks or RJ45 data jacks • Worklight on probe tip for use in dark spaces • Adjustable volume control • Headphone jack for noisy environments (headphones not included) Included RJ45 Cable, RJ12 cable + Alligator Clips, (4) AAA Batteries
Replacement Parts
Description Replacement Test Cables
VDV500-705
www.kleintools.com > 800-553-4676
251
Lifting, Pulling, and Structural
Cat. No. VDV770-855
Voice/Data/Video
Description LanMap™ Kit CoaxMap™ Kit
Tool Storage
and map twisted-pair (RJ45) infrastructure (Cat. No. VDV526-055) or coaxial • Identify (F-Connector) cable infrastructure (Cat. No. VDV512-056), up to 19 locations • For use with Scout™ Pro Series and Commander™ testers • Heavy-duty design for long life and repeated connections • Remotes numbered and identifiable by tester 1 through 19 for fast and accurate identification Cat. No. VDV526-055 VDV512-056
Safety, PPE and Comfort
Cat. No. VDV501-211 VDV501-212 VDV501-213 VDV501-214 VDV501-215 VDV501-216 VDV501-217 VDV501-218
Tool Kits
• Replacement remotes to identify, test and map a location in one step • Test voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables • Features an RJ45 jack to test data cables and a male F connector to test coaxial cables • For use with Klein's Scout™ Pro 2, 3 and Commander™ series of testers (sold separately) • Remote is numbered for easy identification • Soft, slip-resistant overmold for easy gripping • Heavy-duty recessed-jack design for durability
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Cable Testing
Tone & Probe PRO Kit
• Includes a professional grade tone generator and tracing probe for non-active wiring • Toner-Pro features 5 distinct tone cadences • Rugged Angled Bed of Nails (ABN) clips securely attach to wires • RJ11 plug easily connects to telephone and RJ45 data jacks to tone wire pair • Toner-Pro tests for continuity and polarity with results indicated by clearly labeled LEDs features 3.5 mm headphone jack for noisy environments • Probe-Pro (headphones not included) probe with durable non-metallic, replaceable conductive tip • Responsive (VDV999-068) —sold separately • Work light on probe tip for use in dark spaces • Terminal block on probe to confirm the toned pair • Each tool includes 4 x AAA batteries padded, divided, zipper pouch for convenient storage • Custom, (VDV770-500) included with kit Cat. No. VDV500-820
VDV500-820
Kit Contains Tone and Probe PRO Kit
REPLACEMENT TIP FOR PROBE-PRO TRACING PROBE
Cat. No.
Description
VDV500-063 VDV500-123 VDV770-500
Toner-PRO Tone Generator Probe-PRO Tracing Probe Zipper Pouch for Tone and Probe
VDV999-068 (sold separately)
Probe-PRO Tracing Probe
• Traces non-energized wiring when used with Toner-Pro Tone Generator (VDV500-063, sold separately) • Responsive, durable, replaceable non-metallic, conductive tip • Work light for use in dark spaces • 3.5 mm headphone jack for noisy environments (headphones not included) • Terminal block on probe to confirm the toned pair has been located • Tool-less, twist-and-lock replacement tip (VDV999-068) available • Includes a loop for a lanyard • Works with Scout™ Pro, LAN Scout™, Jr. and Commander™ series of testers Cat. No. VDV500-123
Batteries 4 x AAA
Overall Length 1.4" (3.6 cm)
Overall Height 9" (22.7 cm)
Overall Width 1.2" (3.0 cm)
REPLACEMENT TIP FOR PROBE-PRO TRACING PROBE VDV500-123
VDV999-068 (sold separately)
Toner-PRO Tone Generator
• Professional grade tone generator for non-active wiring • For use with Probe-Pro Tracing Probe (VDV500-123) required (sold separately) • Five distinct tone cadences • Rugged Angled Bed of Nails (ABN) clips securely attach to wires • RJ11 plug easily connects to telephone or RJ45 data jacks to tone individual conductors or wire pairs • Tests for continuity and polarity with response displayed on clearly labeled, easy-to-read LEDs • Loop for a lanyard Cat. No. VDV500-063
252
Batteries 4 x AAA
Overall Length 2.5" (6.4 cm)
Overall Height 4.25" (10.8 cm)
www.kleintools.com > 800-553-4676
Overall Width 1" (2.5 cm)
VDV500-063
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage
Clamp Meters Meter Accessories Electrical Testers Thermometers
Test and Measurement
Borescopes Specialty Testers
Power Tools and Accessories
Crafted for optimum durability, reliability and functionality, our line of test and measurement equipment is engineered with the user in mind. Designed for, and by electricians, our electrical testers provide the latest in innovative, time-saving features that professionals require.
Voice/Data/Video
MEASUREMENT
Multimeters
High Voltage Testers
Lifting, Pulling, and Structural
253
CLAMP METERS
Pliers
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video
Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
WARNINGS: To ensure safe operation and service of the tester, follow these instructions. Failure to observe these warnings can result in severe injury or death. • • • • •
Before each use, verify meter operation by measuring a known voltage or current. Never use the meter on a circuit with voltages that exceed the category based rating of this meter. Do not use the meter during electrical storms or in wet weather. Do not use the meter or test leads if they appear to be damaged. Ensure meter leads are fully seated, and keep fingers away from the metal probe contacts when making measurements. • Do not open the meter to replace batteries while the probes are connected.
• Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling. • Use caution when working with voltages above 60V DC, or 25V AC RMS. Such voltages pose a shock hazard. • To avoid false readings that can lead to electrical shock, replace batteries if a low battery indicator appears. • Unless measuring voltage or current, shut off and lock out power before measuring resistance or capacitance. • Always adhere to local and national safety codes. Use individual protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
Pliers
Clamp Meters
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
CL900
CL800
CL700
CL600
CL440 Auto-ranging True root mean square (TRMS) 600A AC current AC/DC voltage DC Microamps DC Millivolts Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Inrush Current Temperature Low Pass Filter Non-Contact Voltage Testing
• • • • • • • • • • • • • •
CL390 Auto-ranging True root mean square (TRMS) 400A AC/DC current AC/DC voltage AC/DC Millivolts DC Microamps Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Temperature Non-Contact Voltage Testing
• • • • • • • • • • • • •
CL320 Auto-ranging True root mean square (TRMS) 400A AC current AC/DC voltage DC Microamps Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Temperature Non-Contact Voltage Testing
• • • • • • • • •
CL220 Auto-ranging True root mean square (TRMS) 400A AC current AC/DC voltage AC/DC Millivolts Resistance Continuity Temperature Non-Contact Voltage Testing
• • • • • • •
CL120 Auto-ranging 400A AC current AC/DC voltage AC/DC Millivolts Resistance Continuity Non-Contact Voltage Testing
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • 2 x AAA Batteries
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • 2 K-Type thermocouples • 3 x AAA Batteries
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • Thermocouple • 3 x AAA Batteries
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • Thermocouple • 3 x AAA Batteries
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • Thermocouple • 3 x AAA Batteries
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • 3 x AAA Batteries
2.00" (5 cm)
1.38" (3.5 cm)
1.38" (3.5 cm)
1.38" (3.5 cm)
2.00" (5 cm)
1.6" (4.1 cm)
1.6" (4.1 cm)
1.6" (4.1 cm)
1.6" (4.1 cm)
10.39" (26.4 cm)
9.09" (23.1 cm)
9.09" (23.1 cm)
9.09" (23.1 cm)
10.04" (25.5 cm)
8.45" (21.5 cm)
8.45" (21.5 cm)
8.45" (21.5 cm)
8.45" (21.5 cm)
3.90" (9.9 cm)
3.81" (9.7 cm)
3.81" (9.7 cm)
3.81" (9.7 cm)
3.77" (9.6 cm)
3.5" (8.9 cm)
3.5" (8.9 cm)
3.5" (8.9 cm)
3.5" (8.9 cm)
1.70" (4.3 cm)
1.55" (3.9 cm)
1.55" (3.9 cm)
1.55" (3.9 cm)
1.57" (4.0 cm)
1.5" (3.8 cm)
1.5" (3.8 cm)
1.5" (3.8 cm)
1.5" (3.8 cm)
17.6 oz (499 g)
12.5 oz (354 g)
11.8 oz (335 g)
11.8 oz (335 g)
14.2 oz (40 g)
11 oz (314 g)
11 oz (314 g)
11 oz (314 g)
11 oz (314 g)
Power Tools and Accessories
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • Thermocouple with adapter • 2 x AAA Batteries
Test and Measurement
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • Thermocouple with adapter • 2 x AAA Batteries
Voice/Data/Video
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • 2 x AAA Batteries
Tool Storage
Included
• • • • • • • • • • • • • • • •
Jaw Size
Auto-ranging True root mean square (TRMS) 600A AC current AC/DC voltage Resistance Continuity Tests diodes Non-Contact Voltage Testing
Overall Length
• • • • • • • •
Overall Width
Auto-ranging True root mean square (TRMS) 600A AC current AC/DC voltage Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Temperature Low Impedance (LoZ) mode Non-Contact Voltage Testing
Overall Height
• • • • • • • • • • • • •
Weight
Auto-ranging True root mean square (TRMS) 600A AC/DC current AC/DC voltage Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Temperature Low Impedance (LoZ) mode Non-Contact Voltage Testing
Jobsite Accessories
• • • • • • • • • • • • •
Safety, PPE and Comfort
Auto-ranging True root mean square (TRMS) 2000A AC/DC current AC/DC voltage Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Low Impedance (LoZ) mode Inrush Current Non-Contact Voltage Testing
Tool Kits
• • • • • • • • • • • • •
ADDITIONAL CLAMP METER FEATURES LISTED ON NEXT PAGE 255
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers
Clamp Meters CL900
CL800
CL700
CL600
CL440
6.6' (2 m)
6.6' (2 m)
6.6' (2 m)
6.6' (2 m)
6.6' (2 m)
6.6' (2 m)
6.6' (2 m)
6.6' (2 m)
6.6' (2 m)
IP40
IP40
IP40
IP40
–
–
–
–
–
CAT IV 600V CAT III 1000V
CAT IV 600V CAT III 1000V
CAT IV 600V CAT III 1000V
CAT IV 600V CAT III 1000V
CAT IV 600V CAT III 1000V
CAT III 600V
CAT III 600V
CAT III 600V
CAT III 600V
AC Voltage (Volts)
1000V
1000V
1000V
1000V
1000V
600V
600V
600V
600V
DC Voltage (Volts)
1000V
1000V
1000V
1000V
1000V
600V
600V
600V
600V
AC + DC Voltage
–
–
–
–
–
–
–
–
AC Current (Amps)
2000A
600A
600A
600A
600A
400A
400A
400A
400A
DC Current (Amps)
2000A
600A
–
–
–
400A
–
–
–
Ohms (Resistance)
60MΩ
60MΩ
60MΩ
60MΩ
60MΩ
40MΩ
40MΩ
20MΩ
20MΩ
–
–
–
–
–
–
–
–
–
–
–
FEATURES Drop Protection Ingress Protection
Conduit Tools and Measurement
Drivers and Wrenches
Safety
AC Millivolts
CL390
CL320
CL220
CL120
–
Tool Kits
DC Millivolts DC Microamps True RMS
–
Safety, PPE and Comfort
Audible Continuity Backlight Temperature
–
-14° – 1000°F (-26° – 538°C)
-14° – 1000°F (-26° – 538°C)
Low Impedance
Jobsite Accessories
Low-Pass Filter Inrush Current
–
Reverse Contrast Display -40° – 1832°F -40° – 1832°F ( ° – 1000°C)) (-40° – 1000°C) (-40
-40° – 1832°F ((-40° – 1000°C))
-40° – 1832°F ((-40° – 1000°C))
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2000A
–
–
–
600A
Non-Contact Voltage Testing
Tool Storage
Auto Ranging Range Hold Data Hold
Voice/Data/Video
Capacitance Test
Relative Mode
–
–
–
–
Test and Measurement
Diode Test
Magnetic Mount
Available As Accessory
Available As Accessory
Available As Accessory
Available As Accessory
Available As Accessory
Available As Accessory
Available As Accessory
Available As Accessory
Available As Accessory
–
–
–
–
–
–
–
6000
6000
6000
4000
4000
2000
2000
Frequency / Duty Cycle
6000 μF
6000 μF
6000 μF
–
6000 μF
4000 μF
4000 μF
–
–
1Hz – 500kHz
1Hz – 500kHz
1Hz – 500kHz
–
10Hz – 1MHz
10Hz – 60kHz
10Hz – 1MHz
–
–
MAX only
MAX only
–
–
–
Max / Min
Worklight
–
Auto-Power Off 6000
6000
Lifting, Pulling, and Structural
Power Tools and Accessories
LCD Display Count
256
www.kleintools.com > 800-553-4676
Pliers
Clamp Meters
9.8' (3 m)
6.6' (2 m)
IP40
–
Jaw & Housing CAT IV 600V CAT III 1000V Electrical & Protection Circuit CAT III 600V CAT II 1000V
CAT IV 600V CAT III 1000V
AC Voltage (Volts)
600V
–
DC Voltage (Volts)
1000V
–
AC Current (Amps)
200A
3000A
Ohms (Resistance)
60MΩ
–
Drop Protection Ingress Protection
Safety
Included
• Carrying Case • Instruction Manual • Test Leads with CATIII/CAT IV safety caps • 2 x AAA Batteries
• • • •
True root mean square (TRMS) 3000A AC current Data Hold Max/Min
True RMS
• Carrying Case • Instruction Manual • 2 x AAA Batteries CATIV 600V, CATIII 1000V
8.39" (21.3 cm)
10.50" (26.7 cm)
2.12" (5.4 cm)
4.12" (10.5 cm)
1.38" (3.5 cm)
1.06" (2.7 cm)
Backlight Non-Contact Voltage Testing
–
Auto Ranging
–
Range Hold
–
Jobsite Accessories
Jaw and Housing: CATIV 600V/CATIII 1000V Electrical: CATIII 600V/CATII 1000V
Data Hold Max / Min
–
Auto-Power Off 6.40 oz (180.0g)
5.90 oz (167.0 g)
LCD Display Count
6000
Tool Storage
Weight
–
Audible Continuity
Safety, PPE and Comfort
Overall Overall Overall Height Width Length Standards
Auto-ranging True root mean square (TRMS) 200A AC current AC/DC voltage Resistance Continuity Non-Contact Voltage Testing
CL150
Tool Kits
• • • • • • •
CL360
Conduit Tools and Measurement
CL150
Drivers and Wrenches
CL360
Strippers, Cutters, and Crimpers
FEATURES
3000
Voice/Data/Video
Electrical Test Kits Best-Sellers in Convenient Value Kits
Test and Measurement
CL120KIT
Description
CL120KIT Clamp Meter Electrical Test Kit CL120VP Clamp Meter Electrical Test Kit CL320KIT HVAC Electrical Test Kit
CL320KIT
Included CL120 Digital Clamp Meter with Test Leads; 69409 Line Splitter 10x; RT210 GFCI Receptacle Tester; Carrying Pouch; Instructions; and All Required Batteries CL120 Digital Clamp Meter with Test Leads; NCVT-3P Dual Range Non-Contact Voltage Tester with Flashlight; ET40 Electronic AC/DC Voltage Tester; RT210 GFCI Receptacle Tester; Carrying Case; Instructions; and All Required Batteries CL320 Digital Clamp Meter with Test Leads and Thermocouple; IR07 Dual IR and Probe Thermometer; NCVT-3P Dual Range Non-Contact Voltage Tester with Flashlight; Carrying Pouch; Instructions; and All Required Batteries
257
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Cat. No.
CL120VP
MULTIMETERS
Pliers
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video
Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
WARNINGS: To ensure safe operation and service of the tester, follow these instructions. Failure to observe these warnings can result in severe injury or death. • • • • •
Before each use, verify meter operation by measuring a known voltage or current. Never use the meter on a circuit with voltages that exceed the category based rating of this meter. Do not use the meter during electrical storms or in wet weather. Do not use the meter or test leads if they appear to be damaged. Ensure meter leads are fully seated, and keep fingers away from the metal probe contacts when making measurements. • Do not open the meter to replace batteries while the probes are connected.
• Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling. • Use caution when working with voltages above 60V DC, or 25V AC RMS. Such voltages pose a shock hazard. • To avoid false readings that can lead to electrical shock, replace batteries if a low battery indicator appears. • Unless measuring voltage or current, shut off and lock out power before measuring resistance or capacitance. • Always adhere to local and national safety codes. Use individual protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
Pliers
Multimeters
MM400
MM300
6.6' (2 m)
6.6' (2 m)
3.3' (1 m)
3.3' (1 m)
IP42
IP42
–
–
CAT IV 600V CAT III 1000V
CAT IV 600V CAT III 1000V
CAT III 600V
CAT III 600V
AC Voltage (Volts)
1000V
1000V
600V
600V
DC Voltage (Volts)
1000V
1000V
600V
600V
AC Current (Amps)
10A
10A
10A
10A
DC Current (Amps)
10A
10A
10A
–
Ohms (Resistance)
40MΩ
40MΩ
40MΩ
20MΩ
Drop Protection Ingress Protection Safety
Included
• • • • • • • • • •
Auto-ranging 10A AC/DC current AC/DC voltage Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Temperature
• • • • • •
Manual-ranging 10A AC current AC/DC voltage Resistance Continuity Tests diodes
DC Millivolts –
AC Milliamps DC Milliamps
–
AC Microamps DC Microamps –
True RMS
–
Backlight Temperature
• Instruction Manual • Test Leads with CATIII/CAT IV safety caps • Thermocouple with adapter • Alligator Clips • 2 x AAA Batteries • Carrying Case
• Instruction Manual • Test Leads with CATIII/CAT IV safety caps • Thermocouple with adapter • Alligator Clips • 2 x AAA Batteries • Carrying Case
CAT IV 600V, CAT III 1000V
CAT IV 600V, CAT III 1000V
–
Audible Continuity
• Instruction Manual • Instruction Manual • Test Leads with • Test Leads with CATIII/CAT IV CATIII/CAT IV safety caps safety caps • Thermocouple • 2 x AAA Batteries with adapter • 2 x AAA Batteries
0° – 1500°F 0° – 1000°F 0° – 1000°F (-18° – 816°C) (-18° – 538°C) (-18° – 538°C)
–
–
–
Low Impedance
–
Auto Ranging
–
Range Hold
–
Data Hold Diode Test CAT III 600V
CAT III 600V
Capacitance Test
7.00" (17.8 cm)
7.00" (17.8 cm)
6.00" (15.2 cm)
6.00" (15.2 cm)
4000 μF
1000 μF
1Hz – 500 KHz 1Hz – 500 KHz
3.55" (9 cm)
3.55" (9 cm)
3.16" (8 cm)
3.16" (8 cm)
Overall Height
1.78" (4.5 cm)
Weight
14.4 oz (408 g)
14.4 oz (408 g)
8.2 oz (231 g)
8.2 oz (231 g)
– –
–
Bar Graph Available As Accessory
–
–
–
Available As Accessory
Available As Accessory
Available As Accessory –
Auto-Power Off Battery Test LCD Display Count
–
–
–
–
4000
4000
4000
259
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
2000
Power Tools and Accessories
1.78" (4.5 cm)
1Hz – 50 KHz
Test and Measurement
2.09" (5.3 cm)
–
Max / Min
Magnetic Mount 2.09" (5.3 cm)
200 μF
Voice/Data/Video
Frequency / Duty Cycle
Lead Warning Overall Width
–
Tool Storage
Standard
Auto-ranging 10A AC/DC current AC/DC voltage Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Temperature
MM300
Jobsite Accessories
Overall Length
• • • • • • • • • •
MM400
Safety, PPE and Comfort
Auto-ranging True root mean square (TRMS) 10A AC/DC current AC/DC voltage Resistance Continuity Frequency Duty cycle Capacitance Tests diodes Temperature Low Impedance (LoZ) mode
MM600
Tool Kits
• • • • • • • • • • • •
MM700
Conduit Tools and Measurement
MM600
Drivers and Wrenches
MM700
Strippers, Cutters, and Crimpers
FEATURES
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
FEATURES
Insulation Resistance Tester
ET600
Drop Protection
Test insulation resistance up to 4000MΩ at • 125V, 250V, 500V, and 1000V DC Test and Lock buttons for simple insulation testing • • Warning alarm and high voltage icon for detection of voltage • Measures up to 1000V AC/DC, low resistance, and continuity ranging True Root Mean Square (TRMS) • Automatic technology for increased accuracy display with bar graph, Auto-power off, • Backlit High Voltage, Max/Min, and Hold icons • Low battery indicator with easily replaceable battery and fuse Built-in stand and optional magnetic • hanger for hands free operation • Test verification of conformity to EN61557-1,-2,-4 • CAT IV 600V and CAT III 1000V safety rating Right Angle Test Leads and • Includes Heavy-Duty Alligator Clip Test Leads
Ingress Protection Safety Test Voltages
3.3' (1 m) – CAT IV 600V CAT III 1000V 125V, 250V, 500V, 1000V
AC Voltage (Volts)
1000V
DC Voltage (Volts)
1000V
Insulation Resistance Ohms (Resistance)
4000MΩ 4kȍ
Live Circuit Detection True RMS Over-Range Indication
Tool Kits
Conduit Tools and Measurement
Multimeters
Audible Continuity Backlight
Safety, PPE and Comfort
Auto Ranging Test Lock Data Hold Max / Min
Auto-Zero Cat. No. ET600
Included • Instruction Manual • Right Angle Test Leads with CATIII/CAT IV safety caps • Heavy-Duty Alligator Test Leads • 6 x AA Batteries • Carrying Case
Tool Storage
Jobsite Accessories
Bar Graph
Overall Length 7.93" (20.2 cm)
Overall Height 2.32" (5.9 cm)
Overall Width 3.59" (9.1 cm)
Magnetic Mount
Available As Accessory
Auto-Power Off LCD Display Count
4000
Best-Sellers in Convenient Value Kits
Test and Measurement
Voice/Data/Video
Electrical Test Kits
Lifting, Pulling, and Structural
Power Tools and Accessories
69149P
Cat. No.
Description
69149P
Electrical Test Kit
69355
Premium Electrical Test Kit
MM320KIT
Digital Multimeter Electrical Test Kit
260
69355
MM320KIT
Included MM300 Manual-Ranging Digital Multimeter with Right-angle Test Leads; NCVT1P Non-Contact Voltage Tester; RT105 Receptacle Tester with Test Leads; Instructions; and All Required Batteries MM320 Manual-Ranging Digital Multimeter with Right-angle Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight; RT250 GFCI Receptacle Tester with LCD; Instructions; and All Required Batteries MM320 Manual-Ranging Digital Multimeter with Right-angle Test Leads; NCVT-3P Dual Range Non-Contact Voltage Tester with Flashlight; ET45 AC/DC Voltage Tester; RT210 GFCI Receptacle Tester; Carrying Case; Instructions; and All Required Batteries
www.kleintools.com > 800-553-4676
Pliers
Meter Accessories
Strippers, Cutters, and Crimpers
Multimeter Replacement Fuses For Use With MM200 Fuse Kit MM300 MM300, MM400 MM400 MM600, MM700 MM600, MM700, ET600
Fuse Type F10A/500V, F400mA/250V 5x20 200MA 600V 6x32 10A 600V 5x20 500MA 600V 10x38 10A 1000V 6x32 500MA 1000V
69033 69194
Drivers and Wrenches
Cat. No. 69194 69031 69032 69033 69034 69035
Conduit Tools and Measurement
Replacement K-Type Thermocouples
• UL listed replacement thermocouple with banana plug connector 0° to 250°C (Cat. No. 69028) • Measurement range of 0° to 250°C (Cat. No. 69435) • Temperature measurement range of 0 to 480°C and includes banana plug adapter (Cat. No. 69142) • Allows K-Type temperature thermocouples to be used with a meter with banana plug ports (Cat. No. 69146) ®
69146
Tool Kits
69435
69142
Type K-Type Banana Thermocouple K-Type Thermocouple K-Type Thermocouple, High Temperature with Adapter K-Type Banana Plug Adapter
For Use With CL220, CL320, CL390, CL700, CL800, MM400, MM600, MM700, and some older models Any Clamp or Digital Multimeter that Measures Temperature Any Clamp or Digital Multimeter that Measures Temperature Any Clamp or Digital Multimeter that Measures Temperature
Jobsite Accessories
Cat. No. 69028 69435 69142 69146
Safety, PPE and Comfort
69028
*UL and the UL logo are trademarks of UL LLC © 2020
Features a temperature sensor that clamps • around pipes ranging from 1/4" to 1-3/8"
tip easily pierces fiberglass ductwork • Pointed for HVAC measurements • A coiled 5'(1.5 m) lead • Wide measurement range: -58 to 1112°F with any clamp or multimeter that • Works measures temperature • Includes banana plug adapter
• • •
diameter (up to 35 mm) A flexible 40" (1016 mm) lead Works with any clamp or multimeter that measures temperature Includes banana plug adapter
Voice/Data/Video
K-Type Thermocouple Probe
Tool Storage
K-Type Temperature Pipe Clamp
Cat. No. Overall Length Overall Height Overall Width 69140 5.25" (13.3 cm) 0.75" (1.9 cm) 3.00" (7.6 cm)
Temperature Range -4 to 212°F (-20 to 100°C)
69144
Cat. No. Overall Length 69144 12.50" (31.7 cm)
Overall Height Overall Width 0.50" (1.3 cm) 0.50" (1.27 cm)
Temperature Range -58 to 1112°F (-50 to 600°C)
Test and Measurement
69140
Power Tools and Accessories
261
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Line Splitter 10x
• Allows the measuring of current draw up to 15A without splitting the load's power cord • For use with all Klein Tools clamp meters and other manufacture clamp meters • Can be used to perform voltage checks with standard multimeter probes • Provides 10X measurement mode • For North American-style outlets only WARNINGS: • • • •
Do NOT use with loads greater than 15A. Risk of electric shock and burn. Contact with live circuits could result in death or serious injury. Do NOT use if line splitter appears damaged. If in doubt, replace line splitter. Do NOT use line splitter if wet. For indoors use only.
Cat. No. 69409
Overall Length 4.67" (11.9 cm)
Overall Height 4.67" (11.9 cm)
Overall Width 2.28" (5.8 cm)
69409
Rare-Earth Magnetic Hangers
• Magnetic Hangers allow the user to safely work hands-free • Constructed with powerful Rare-Earth magnets nylon weave resists wear and tear and clips securely into • Durable back of meter (Cat. No. 69417) • Securely clips onto the back of the meter with no strap (Cat. No. 69445)
69445
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Meter Accessories
69417
Cat. No. Description 69417 Rare-Earth Magnetic Hanger, with Strap 69445 Rare-Earth Magnetic Hanger, no Strap
For Use With CL120, CL220, CL320, CL390, CL600, CL700, CL800, CL900, ET600, MM300, MM320, MM400, MM600, MM700, and some older models
Replacement Test Leads
• Safety Rating: Category IV 600V and CAT III 1000V for use as replacement test leads for • Intended meters that have standard, banana-type input jacks perform accurately with Klein Tools' meters • Leads and other manufacturer’s meters Screw-on alligator clips attach to wires and other • conductors (Cat. No. 69410) Perfect for insulation • 69831 and 69367) resistance testing (Cat. Nos.
69367
Lifting, Pulling, and Structural
Power Tools and Accessories
69381
Cat. No. 69410 69381 69367
262
Description Replacement Test Lead Set, Right Angle Heavy-Duty Alligator Clip Test Leads, 3 Feet Heavy-Duty Alligator Clip Test Leads, 10 Feet
Package Quantity 1-Pair 1-Pair 1-Pair
www.kleintools.com > 800-553-4676
Overall Length 41" (104.1 cm) 36" (91.4 cm) 120" (304.8 cm)
69410
TESTERS
Strippers, Cutters, and Crimpers Drivers and Wrenches
ELECTRICAL
Pliers
Electronic Voltage Testers It tests at 4 useful levels for both AC (12V to 240V AC) and DC (1.5V to 24V), can identify and distinguish between AC or DC voltage, and indicates polarity when measuring DC voltages. Using 2 x AAA batteries (included), it will power off automatically after approximately 2 minutes of non-use, and has a low battery indicator. This CATIII 250V, Class 2, Double Insulation safety rated tester has built-in test lead holders on sides of the tester.
• ET45 is an Electronic Voltage Tester for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells, etc. It tests • ET60 is a solid-state, low impedance, Electronic Voltage Tester that measures AC/DC voltages up to 600V. It does NOT require batteries - it is powered by the applied voltage. This tough meter design is water and dust resistant, and withstands a 9.8' (3 m) drop.
Tool Kits
at four useful levels for both AC (24V to 240V AC) and DC (32V to 330V). Batteries are not required; tester is powered by the applied voltage. Built-in test leads are held in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets and the other for convenient storage. Built to withstand a 9.8' (3 m) drop, this tester has a CATIII 350V, Class 2, Double Insulation safety rating.
Conduit Tools and Measurement
• ET40 is an Electronic Voltage Tester for checking or troubleshooting common residential electrical wiring and devices such as outlets, light fixtures, doorbells, batteries, etc.
• ET250 Digital AC/DC Voltage and Continuity Tester is a solid-state, digital voltage and continuity tester that measures AC/DC voltages up to 600V and tests for continuity.
Safety, PPE and Comfort
Additionally, the ET250 also tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. This tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions. It automatically selects the measurement mode, and auto-powers on when a voltage/continuity measurement is attempted. This tough meter design is water and dust resistant, and withstands a 9.8' (3 m) drop.
Jobsite Accessories Tool Storage
ET45VP
Voice/Data/Video
ET60 ET40
Test and Measurement
ET45 ET250
Batteries 2 x AAA Not Required Not Required 3 x AAA
Voltage AC Level Indicators: 12V, 24V, 120V, 240V; and DC indicators: 1.5V, 9V, 12V, >17-24V AC Level Indicators: 24V, 48V, 120V, 240V; DC Level indicators: 32V, 64V, 160V, 330V 12 to 600 V AC/DC 2 to 600V AC/DC
Description AC/DC Voltage and Receptacle Electrical Test Kit
Standard CAT III 250V, CE, UKCA CAT III 350V, CE, UKCA CAT IV 600V CAT IV 600V, CE, UKCA
Overall Length 5.24" (133.0 mm) 4.45" (113.0 mm) 5.67" (144.1 mm) 6.06" (154.0 mm)
Overall Width 1.11" (28.0 mm) 1.05" (27.0 mm) 2.84" (72.2 mm) 2.31" (58.8 mm)
Power Tools and Accessories
Cat. No. ET40 ET45 ET60 ET250 Tester Kit Cat. No. ET45VP
Included ET45 Electronic Voltage Tester, RT210 Receptacle Tester
263
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Electrical Testers Non-Contact Voltage Testers
• CAT IV safety rating • Auto power-off • Convenient pocket clip • Does not detect DC voltage NCVT-1P provides non-contact detection of standard voltage 50 to 1000V AC in cables, • cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires. is a dual range non-contact voltage tester. The NCVT detects voltage from 70 • NCVT-2P to 1000V AV (in Range 1) or 12 to 1000V AC (in Range 2). Updated screw-cap battery
NCVT-1P
NCVT-2P
compartment, heavy-duty pocket clip, and recessed buttons increase product durability. Enhanced LED interface makes the product easy-to-understand; light indicator clearly marks range being used for testing. NCVT-3P
is a dual range non-contact voltage tester with an integrated flashlight that can be • NCVT-3P used indepentendent of the voltage detection function. The NCVT can be set to detect voltage from 70 to 1000V AV (in Range 1) or 12 to 1000V AC (in Range 2). Enhanced LED interface makes the product easy-to-understand; light indicator clearly marks range being used for testing. is designed for HVAC applications and hot spots in panels, includes an infrared • NCVT-4IR thermometer with selectable °F/°C from -20° to 482°F (-30° to 250°C), LCD backlit display,
NCVT-4IR
and convenient laser pointer to help target 4:1 distance to spot ratio for temperature. NCVT-5A has dual range non-contact detection of voltage 12 to 1000V AC or 70 to 1000V • AC with visual and audible voltage indicators and a bright integrated laser pointer that can
Safety, PPE and Comfort
operate independently from non-contact functionality. US Patent No. D750985.
NCVT-5A
detects 12-1000V AC and incorporates a 66-Foot (20 m) Laser Distance Meter that • NCVT-6 can measure in meters, inches with decimals, inches with fractions, feet with decimals, or feet with fractions. The laser distance meter functions independently from the NCVT with a simple-to-use intuitive interface.
Jobsite Accessories
NCVT-6
Features
NCVT-4IR
NCVT-5A
NCVT-6
6.6' (2 m)
6.6' (2 m)
9.8' (3 m)
6.6' (2 m)
IP54
IP67
IP54
–
IP40
CAT IV 1000V
CAT IV 1000V
CAT IV 1000V
CAT IV 1000V
CAT IV 1000V
CAT IV 1000V
50-1000V AC
Range 1: 12-1000V AC Range 2: 70-1000V AC
Range 1: 12-1000V AC Range 2: 70-1000V AC
12-1000V AC
Range 1: 12-1000V AC Range 2: 70-1000V AC
12-1000V AC
50-500Hz
50-500Hz
50-500Hz
50-500Hz
50-500Hz
50-500Hz
Temperature
–
–
–
-22° – 482°F (-30° – 250°C)
–
–
Laser
–
–
–
Class 2
Class 3a
Class 2
Flashlight
–
–
–
–
–
Distance Measuring
–
–
–
–
–
Backlight
–
–
–
LCD Display
–
–
–
2 x AAA
2 x AAA
Overall Length
5.5" (14 cm)
Overall Height Overall Width
NCVT-1P
NCVT-2P
NCVT-3P
6.6' (2 m)
6.6' (2 m)
IP40
Safety and Standards Voltage
Drop Protection
Tool Storage
Ingress Protection
Frequency Range
Voice/Data/Video
Audible and Visual Alarms
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Auto-Power Off
Batteries
264
–
–
Backlight
–
Reverse Contrast
2 x AAA
2 x AAA
2 x AAA
2 x AAA
5.82" (14.8 cm)
5.70" (14.5 cm)
6.25" (15.9 cm)
6" (15.2 cm)
6.45" (16.4 cm)
0.72" (1.8 cm)
0.86" (2.2 cm)
0.93" (2.4 cm)
1.19" (3 cm)
1.16" (2.9 cm)
1.32" (3.4 cm)
1" (2.5 cm)
1.09" (2.8 cm)
1.09" (2.8 cm)
1.25" (3.2 cm)
0.96" (2.4 cm)
1.21" (3.1 cm)
> 800-553-4676
Pliers
Electrical Testers Featuring patent pending detection of Open Neutral Open Ground wiring fault
Drivers and Wrenches
Receptacle Tester features a large backlit LCD readout of • GFCI voltage and clear indication of wiring faults • LCD readout shows the time required to trip a GFCI device • Detect and identify common wiring faults conditions: Wired Correctly, Open Ground, Open Neutral, • Wiring Open Hot, Dual Open (Neutral & Ground) Patent Pending,
Strippers, Cutters, and Crimpers
GFCI Receptacle Tester with LCD
Reversed Hot/Ground, Reversed Hot/Neutral
Conduit Tools and Measurement
• Auto-Hold is convenient for hard-to-reach outlets • Bright green and red LEDs illuminate for visual indicators • CAT II 135V safety rating • Durable 6.6' (2 m) drop protection • For use on 3-wire, North American 120V electrical outlets only
Tool Kits
RT250
Overall Length 4.5" (11.4 cm)
Overall Height 1.1" (2.79 cm)
Overall Width 2.0" (5.1 cm)
Safety, PPE and Comfort
Cat. No. Description GFCI RT250 GFCI Receptacle Tester with LCD Yes, Including Time to Trip Device
Voltage Testing Kits Best-Sellers in Convenient Value Kits
Jobsite Accessories Tool Storage
NCVT2PKIT
Voice/Data/Video
NCVT3PKIT
NCVT3PKIT NCVT5KIT RT250KIT
Included NCVT-2P Dual Range Non-Contact Voltage Tester; RT105 Receptacle Tester; Instructions; and All Required Batteries NCVT-3P Dual Range Non-Contact Voltage Tester with Flashlight; ET45 AC/DC Voltage Tester; Instructions; and All Required Batteries NCVT-5A Dual Range Non-Contact AC Voltage Tester; RT210 GFCI Receptacle Tester; Instructions; and All Required Batteries RT250 Electrical Receptacle Tester with LCD; NCVT-3P Dual Range Non-Contact Voltage Tester with Flashlight; Storage Pouch; Instructions; and All Required Batteries
www.kleintools.com > 800-553-4676
265
Lifting, Pulling, and Structural
Description Dual-Range NCVT with Receptacle Tester Electrical Test Kit Dual-Range NCVT and AC/DC Voltage Tester Electrical Test Kit Dual-Range NCVT and GFCI Receptacle Tester Electrical Test Kit Premium Dual-Range NCVT and GFCI Receptacle Tester Electrical Test Kit
RT250KIT
Power Tools and Accessories
Cat. No. NCVT2PKIT
Test and Measurement
NCVT5KIT
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories
Electrical Testers AFCI/GFCI Outlet Tester
• Detects the most common wiring faults in standard, AFCI, and GFCI electrical outlets • Test AFCI devices by simulating arc fault conditions • Test GFCI devices by simulating ground fault conditions of detecting a dual-open wiring fault with simultaneous open neutral and open ground wires • Capable (patent pending technology) • Tester delivers clear visual indication of the wiring condition at the electrical outlet to test North American-style grounded electrical outlets in 120V AC circuits (incorporates a • Designed three-pin plug) • Built to withstand a 6.6' (2 m) drop • CATIII 135V safety rating • The RT310 features a patent pending AFCI test method that is unique to Klein Tools Cat. No. RT310
GFCI Yes
Standard CAT III 135V
Batteries 3x AAA
Plug Length 10" (25.4 cm)
Overall Length 7.4" (18.8 cm)
Overall Width 2.3" (5.8 cm)
Receptacle Testers
• Light sequence indicates correct/incorrect wiring • Conforms to UL Std 1436, Certified to CSA Std C22.2 #160 • Operating temp: 32° to 140°F (0° to 40°C) • Built to withstand a 6.6' (2m) drop • Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet • Designed to detect the most common wiring problems in standard receptacles • Cat. No. RT210 works on GFCI outlets and confirms operation of the ground fault Cat. No. RT110 RT210
GFCI No Yes
Overall Length 1.62" (4.1 cm) 1.62" (4.1 cm)
Overall Height 2.88" (7.3 cm) 2.88" (7.3 cm)
Overall Width 1.88" (4.8 cm) 1.88" (4.8 cm)
Continuity Tester reveals shorts or broken circuits in • Quickly all types of electrical devices and controls • Tests for continuity of circuit with power off • Bulb in handle glows when circuit is complete (bulb included) • Pointed 3.75" (95 mm) probe gets right to the problem 4" (102 mm) long handle with removable nylon cap • Deluxe holds replaceable bulb and battery • 36" (915 mm) test lead with alligator clip • Uses 1 x AAA battery (not included) • Proudly built in USA with global components Cat. No. 69133 69131
266
RT110
RT210
Low-Voltage Tester
Overall Length 43.75" (111.1 cm)
Replacement Part
Lifting, Pulling, and Structural
Overall Height 1.3" (3.3 cm)
RT310
Replacement Bulb for Continuity Tester Cat. No. 69133
www.kleintools.com > 800-553-4676
69133 69127
• Device for checking live 6-24V, AC or DC circuits for shorts in automotive and truck electrical systems, motor field • Tests coils, radio and low-voltage circuits, ground circuits of all lamps, wiring, fuses, etc.
• Bulb in handle glows when circuit is complete (bulb included) • Pointed 3.75" (95 mm) probe makes checking easier • Deluxe 3.5" (89 mm) long handle with nylon top holds replaceable bulb • 36" (915 mm) test lead with alligator clip • Proudly built in USA with global components Cat. No. 69127
Overall Length 43.25" (109.9 cm)
Pliers
Electrical Testers
Strippers, Cutters, and Crimpers
Digital Circuit Breaker Finder with GFCI Outlet Tester
Standard CAT II 120V
Overall Height Overall Width 2.16" (5.5 cm) 1.39" (3.5 cm) (With Transmitter docked in Receiver) (With Transmitter docked in Receiver)
ET310
Tool Kits
Batteries Overall Length 1x 9V 10.96" (27.8 cm) (With Transmitter docked in Receiver)
Conduit Tools and Measurement
Cat. No. ET310
Drivers and Wrenches
and accurately locate the correct circuit breaker in a panel corresponding to the • Quickly circuit to which an electrical outlet or fixture is connected Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture • and a Receiver, used to scan the panel to locate the correct breaker Receiver delivers clear visual and audible indications when the correct breaker has been located • Operates on 90 to 120V AC circuits • Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices • Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use • Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets • The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411) • Transmitter is powered by the circuit when connected to the electrical outlet or fixture • Uses one 9V battery (included) in Receiver only; Transmitter does not require a battery • Built to withstand a 6.6' (2 m) drop •
Digital Circuit Breaker Finder Safety, PPE and Comfort
accurately, and automatically find the corresponding • Quickly, circuit breaker of any standard 120V outlet • For use on powered circuits only • Does not require interruption of service green arrow and loud beep provide clear indication of • Bright correct breaker • Strong transmitter reaches distances up to 1000' (305 m) Circuit Breaker Finder Accessory Kit (Cat. No. 69411) • Optional shown below: Find breakers of light fixtures and bare wires
Jobsite Accessories
with light socket and alligator clip adapters
Overall Length Receiver: 6.00" (15.2 cm); Transmitter: 2.80" (7.1 cm)
Overall Height 0.91" (2.3 cm)
Overall Width Receiver: 2.00" (5.1 cm); Transmitter: 1.89" (4.8 cm) ET300
Voice/Data/Video
Circuit Tester
Circuit Breaker Finder Accessory Kit socket adapter for finding the corresponding • Light circuit of a lighting fixture clip adapter enables use of Digital • Alligator Circuit Breaker Finder on bare wires
Test and Measurement
69105
69411
Overall Length 35" (88.9 cm)
Cat. No. 69411
For Use With ET300 and ET310 Digital Circuit Breaker Finders
267
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
• Tests circuits rated from 80 to 600V AC/DC • High-visibility neon lamp indicator sealed 5-11/16" (144 mm) probe on long 24" (610 mm) • High-impact, leads for convenience in testing motors, fuses, relays, switches, etc. • Resistor between each probe and lead Cat. No. 69105
Tool Storage
Cat. No. ET300
THERMOMETERS
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
Electrical Testing and Installation Tools > Test and Measurement > Thermometers
• User selectable Fahrenheit and Celsius temperature measurements • Backlit display for easy viewing in low light • Max/Min, Hold and Average functions • Auto-power off after 15 minutes conserves battery life • FDA GRAS compliant for food usage • Lightweight, compact tool with pocket clip provides easy storage and quick access Cat. No. ET05 has a range of -40° to 482° F (-40° to 250° C); • Cat. No. ET10 has a range of -40° to 572° F (-40° to 300° C) No. ET10 features a magnet inside base of probe to easily attach • Cat. to vents for hand-free IAQ (indoor air quality) measurements
ET05
ET10 (Protective sheath positioned as handle)
Cat. No. ET05 ET10
Batteries 2 x LR44 2 x LR44
Overall Length 6.50" (16.5 cm) 6.50" (16.5 cm)
Overall Height 0.94" (2.4 cm) 0.97" (2.5 cm)
Overall Width 1.08" (2.7 cm) 1.25" (3.2 cm)
Dual Infrared and Probe Thermometer
• Pocket tester measures temperature from -40° to 572° F (-40° to 300°C) • Accurately measure surface temperature with infrared thermometer (DS ratio 8:1) • Measure inside air vents and duct temperatures with temperature probe with hanging hook • Quickly calculates differential temperature (T1-T2) for both IR and probe temperatures • Backlit display with Hold, Max/Min, APO, and Low Battery functions • Includes: pouch, instruction manual and 2 x AAA batteries
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Digital Pocket Thermometers
Lifting, Pulling, and Structural
Cat. No. IR07
268
Batteries 2 x AAA
Overall Length 5.82" (14.8 cm)
www.kleintools.com > 800-553-4676
Overall Height 0.95" (2.4 cm)
Overall Width 1.67" (4.2 cm)
IR07
Pliers
Thermometers
Strippers, Cutters, and Crimpers
Targeting Laser Infrared Thermometer, 10:1
• Infrared Thermometer has an optical resolution (distance-to-spot) of 10:1 • Features include targeting laser; automatic hold; backlit display; low battery, auto power-off • Measurement range is -4° to 752° Fahrenheit (-20° to 400° Celsius) • Drop protection to 6.6' (2 m) • Certified to IEC EN 61326-1.2006, EN608251.1994+A2.2001+A1.2002 • Fixed emissivity at 0.95 • Includes custom pouch and a 9V battery • Not a medical device; thermometer is NOT intended for use on people or animals
Ø0.5"
(13 mm)
Ø1"
(25 mm)
Drivers and Wrenches
5" (127 mm)
IR1 Cat. No. IR1
IR1KIT
Batteries 1 x 9V
Overall Length 6.01" (15.3 cm)
Description
Included
Infrared Thermometer with GFCI Receptacle Tester
IR1 Infrared Thermometer, RT210 GFCI Receptacle Tester, Custom Pouch, Instructions and 1 x 9V Battery
Dual Laser Infrared Thermometer, 12:1
Diameter at Spot
Overall Length 6.82" (17.3 cm)
Overall Height 4.53" (11.5 cm)
1"
2"
4"
(25 mm)
(51 mm)
(102 mm)
6" (152 mm) 12" (305 mm) 24" (610 mm) 48" (1219 mm)
Distance to Object
Overall Width 1.84" (4.7 cm)
IR5
Voice/Data/Video
Dual Laser Infrared Thermometer, 20:1
Diameter at Spot
• Optical Resolution (Distance-to-Spot) is 20:1 • Dual targeting lasers offer more accurate determination of area being tested surface temperature measurement capability using • Incorporates IR emission and can also measure bulk temperatures of air, gas,
Overall Length 7" (17.8 cm)
Overall Height 4.49" (11.4 cm)
Distance to Object
IR10
Overall Width 2.05" (5.2 cm)
CAUTION: Reflective materials may be hotter than indicated. Laser radiation-do NOT stare into beam.
www.kleintools.com > 800-553-4676
269
Lifting, Pulling, and Structural
Batteries 1 x 9V
20" (508 mm) 40" (1.016 m) 80" (2.032 m)
Power Tools and Accessories
Cat. No. IR10
10" (254 mm)
Test and Measurement
• • • • • • • •
or liquids using standard K-Type probe Measurement range for both IR and K-Type probe -40° to 1200° F (-40° to 650° C) Adjustable emissivity from 0.1 to 1.0 delivers flexibility to address multiple applications Features include dual-laser targeting, auto-scan, max/min/avg/diff, high/low alarm, backlit display, auto power-off Includes custom pouch, K-Type probe and battery Soft-touch, over-mold housing built to withstand a 9.9' (3 m) drop IP54 ingress protections for dust and water resistance U.S. patent D791,624 Not a medical device; thermometer is NOT intended for use on people or animals
Tool Storage
Batteries 1 x 9V
0.5" (13 mm)
Jobsite Accessories
Optical Resolution (Distance-to-spot) is 12:1 Features include dual-laser targeting, auto-scan, max/min/avg/diff, high/low alarm, backlit display, auto power-off Measurement Range: -22° to 752°F (-30° to 400°C) Includes custom pouch and batteries Certified to IEC EN 61326-1:2006, EN608251:1994+A2:2001+A1:2002 Adjustable emissivity Soft-touch, over-mold housing built to withstand a 6.6' (2 m) drop For ambient temperatures above freezing, the accuracy is +/- 4° F or +/- 2%; Accuracy below freezing is +/- 4° F plus 0.2 degrees per degree below 32° F Not a medical device; thermometer is NOT intended for use on people or animals
Cat. No. IR5
Overall Height 4.14" (10.5 cm)
Safety, PPE and Comfort
• • • • • • • • •
Overall Width 1.24" (3.1 cm)
Tool Kits
Kit Cat. No.
Description Infrared Digital Thermometer with Targeting Laser, 10:1
Conduit Tools and Measurement
10" (254 mm) 20" (508 mm) 40" (1016 mm)
BORESCOPES
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
Turn your smartphone into a smart tool
Borescope for Android® Devices connects to Android on-the-go (OTG) version 4.0 or higher devices; • Borescope NOT for iPhones or iPads IP67 9 mm camera surrounded by 6 LEDs for • Waterproof high quality 640 x 480 pixel images Capture and share images and video via text or email using the Klein Tools App • available for download at Google Play • Armored 10' (3 m) gooseneck cable for extended reach • Direct USB Type-C connection with adapter for micro-USB • No batteries needed; powered by device connection
Tool Kits
®
®
®
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
®
Turn your smartphone into a smart tool Cat. No. Screen Resolution ET16 640 x 480 max pixels
Included Borescope with 10' Gooseneck, USB Adapters, Carrying Case, and Instruction Manual
Test and Measurement Power Tools and Accessories
Overall Length 3.7" (9.4 cm)
Overall Height 0.95" (2.4 cm)
Overall Width 1.3" (3.3 cm)
Google Play® and Android® are registered trademarks of Google LLC. Apple®, iPhone® and App Store® are registered trademarks of Apple Inc
WiFi Borescope Borescope transmits and displays video and images • WiFi directly to your smartphone up to 30' (9 m) away • Waterproof 9 mm camera has 6 on-board, adjustable LED lights and outputs high-quality 640 x 480 images Tough, armored 6' (1.8 m) long waterproof camera gooseneck • maneuvers around obstacles while maintaining rigidity Battery status indicator tracks the charge level of the lithium-ion battery • Increase and decrease camera LED output either on the Borescope or in the App • • The App not only acts as a display, but stores and shares images and videos via text or email • Includes convenient pocket clip, USB charging cable, hook attachment, carrying case, and instructions Klein Borescope App is available free at the App Store for iPhone users • The and Google Play for Android users ®
Lifting, Pulling, and Structural
ET16
®
®
®
Turn your smartphone into a smart tool Cat. No. ET20
Battery Life 5.5 Hours
Ingress Protection Camera/cable: IP67; Body: IP42
Google Play® and Android® are registered trademarks of Google LLC. Apple®, iPhone® and App Store® are registered trademarks of Apple Inc
270
www.kleintools.com > 800-553-4676
Drop Rating 9.8' (3 m)
ET20
Overall Length 7.3" (18.5 cm)
Overall Width 1.5" (3.8 cm)
Overall Height 2.3" (5.8 cm)
TESTERS
SPECIALTY
Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
• Thermal Imager has over 10,000 pixels to troubleshoot hot and cold spots • Adjustable emissivity from 0.10 to 0.99 • Store and share images with optional microSD Card selectable high and low temperature alarms from • User -4 to 752° Fahrenheit (-20 to 400° Celsius) • Select color palettes to best capture the event • Rechargeable lithium-ion battery Includes thermal imager, micro-USB charging cable, • carrying case, and instructions ®*
Safety, PPE and Comfort
®
Display 2.4" (6.1 cm) TFT LCD
Display Resolution 10,800 Pixels
Temperature Range Batteries -4° to 752°F (-20° to 400°C) Lithium-Ion EP 5016393
Tool Storage
*micro-USB® is a registered trademark of SD-3C, LLC.
Digital Differential Manometer
Voice/Data/Video
• Measures air and gas pressure for ports P1, P2, and differential • Range of +/- 60 inH O and full scale accuracy of +/-1.5% • Strong magnet on back for hands-free operation measured: inH O, bar, oz/in , psi, mbar, kPa, inHg, • Units mmHg, kg/cm , ftH 0, and cmH O • Calculates minimum, maximum and average values 6.56' (2 m) x 1/8" (3 mm) inside diameter silicon • Includes tubing, 3 x AAA batteries, pouch, instruction manual 2
2
2
2
2
Power Tools and Accessories
Batteries 3 x AAA
2
Test and Measurement
Cat. No. ET180
Jobsite Accessories
TI250 Cat. No. Description TI250 Rechargeable Thermal Imager
Pliers
Rechargeable Thermal Imager
Overall Length Overall Height Overall Width 2.47" (6.3 cm) 6.19" (15.7 cm) 1.38" (3.5 cm)
ET180
271
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Strippers, Cutters, and Crimpers
Refrigerant Gas Leak Detector gas leak detection of CFCs, HFCs, HCFCs, and blends from 100 • Refrigerant ppm to 3000 ppm • 18" (45.7 cm) gooseneck probe for easy access around equipment • Visual and audible alarms increase with refrigerant gas concentration (100 to 1000 ppm) and low (200 to 3000 ppm) levels of sensitivity • High settings; based on R-134A zero-point calibration at power-up, hold, mute, and low battery • Automatic functions • Includes 4 x AAA batteries, storage pouch, and instructions
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Specialty Testers
Cat. No. ET160
Batteries 4 x AAA
Overall Length Meter: 8.11" (20.6 cm); Gooseneck: 18" (45.7 cm)
Overall Height 1.75" (4.5 cm)
Overall Width 2.72" (6.9 cm)
Combustible Gas Leak Detector Select from two levels of sensitivity: High (50 to 1000 ppm) and Low (50 to • 10,000 ppm) • Measures methane, propane, butane, and other gases to detect for leaks Five red LEDs (visual) and 85db audible alerts that increase with gas • concentration to detect the gas leak • Automatic zero-point calibration at power-up • 18" flexible gooseneck expands sensor's reach; clips onto device for storage • Auto power-off after 10 minutes of non-usage conserves battery life • Includes carrying pouch, instruction manual, and 4 x AAA batteries
Cat. No. ET120
Batteries 4 x AAA
Overall Length 28.31" (71.9 cm)
Overall Height 2.75" (7 cm)
Overall Width 1.78" (4.5 cm)
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Meter is not intended for use as personal protection equipment
Lifting, Pulling, and Structural
ET160
ET120
Carbon Monoxide Meter meter detects and measures concentration levels of carbon • Easy-to-use monoxide gas in ambient air protection with short-term exposure limit (STEL) alarms: low level • User alarm (35 ppm) and high level alarm (200 ppm) display with CO measurement (0 to 1000 ppm) and temperature (°F • Backlit and °C) • Auto-power off after 20 minutes of no usage helps conserve battery life • Includes carrying pouch, instruction manual, and 4 x AAA batteries
Cat. No. ET110
Batteries 4 x AAA
Overall Length 7.75" (19.7 cm)
Meter is not intended for use as personal protection equipment
272
www.kleintools.com > 800-553-4676
Overall Height 1.45" (3.7 cm)
Overall Width 2.16" (5.5 cm) ET110
Pliers
Specialty Testers
Strippers, Cutters, and Crimpers
Pinless Moisture Meter
Batteries 1 x 9V
Overall Length 6" (15.2 cm)
Overall Height 1" (2.5 cm)
Overall Width 2.5" (6.4 cm)
Overall Height 1.41" (3.6 cm)
Overall Width 2.09" (5.3 cm)
Tool Storage
Overall Length 8.09" (20.6 cm)
USB Digital Meters
Voice/Data/Video
and reliably measures and displays the USB port voltage, • Accurately current, capacity, energy and resistance simultaneously for USB-A ports (Cat. Nos. ET900 and ET910) and USB-A and USB-C ports (ET920) No. ET910 can also test the maximum current delivery • Cat. capability of the USB port with built-in fixed loads most common USB-A ports, including Qualcomm • Tests Quick Charge ports; Cat. No. ET920 also tests most common USB-C ports, including Qualcomm Quick Charge ports Stores and recalls up to 10 readings Voltage and current overload detection Hi-resolution LCD for clear visibility in environments with low ambient lighting Built to withstand a 6' (2m) drop No batteries needed; powered by the USB port being tested Energy Delivered 999Wh Maximum
ET910
999Wh Maximum
ET920
Capacity Used 99,999mAh Maximum 3 to 20V DC 0.05 to 3A 99,999mAh Maximum 3 to 20V DC USB-A: 0.05 to 3A; 99,999mAh USB-C: 0.05-5A Maximum
999Wh Maximum
Resistance 400 ohms Maximum 400 ohms Maximum 400 ohms Maximum
ET900
Elapsed Time Up to 999 Hours, 59 Min, 59 Secs Up to 999 Hours, 59 Min, 59 Secs Up to 999 Hours, 59 Min, 59 Secs
ET910
USB Compatibility USB-A; Qualcomm Quick Charge® Compatible USB-A; Qualcomm Quick Charge® Compatible USB-A, USB-C; Qualcomm Quick Charge® Compatible
ET920
Overall Length Overall Height Overall Width 2.84" (7.2 cm) 0.56" (1.4 cm) 1.25" (3.2 cm) 4.31" (11 cm)
0.98" (2.5 cm)
2.15" (5.5 cm)
2.96" (7.5 cm)
0.6" (1.5 cm)
1.96" (5 cm)
273
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Cat. No. Voltage Current ET900 3 to 20V DC 0.05 to 3A
Test and Measurement
• • • • •
Jobsite Accessories
ET130
Batteries 1 x 9V
Safety, PPE and Comfort
IES RECOMMENDED ILLUMINATION* Location Lux FC Office Conference Room 200-750 18-70 Office area 500-750 47-70 Lobbies, lounges 100-200 9-18 School Auditorium, Gymnasium 100-300 9-28 Classroom 200-750 18-70 Library, Drafting, Laboratory 500-1500 47-140 Hospital Rooms 100-300 9-28 Emergency Room 500-1000 47-93 Operating Room 1000-2000 93-186 Factory Packing work 150-300 14-28 Parts assembly 1500 -3000 140-280 Inspection work 750-1500 70-140 Store Stairs, Corridor 150-200 14-18 Stockroom 100-300 9-28 Merchandising 750-1500 70-140 *The Lighting Handbook 10th Edition, Illuminating Engineering Society
precision meter to monitor light levels and • Easy-to-operate lighting retrofit projects • Ideal for incandescent, fluorescent, metal halide, and day light • Measurements in foot candles (FC) and Lux • Auto and manual range: 4000 FC; 40,000 Lux • Features backlit LCD display with 40-segment bar graph • Data Hold, Max/Min, and Auto Power Off • Includes carrying pouch, instruction manual, and 9V battery
Cat. No. ET130
ET140
Tool Kits
Light Meter
Conduit Tools and Measurement
Cat. No. ET140
Drivers and Wrenches
electromagnetic field (EMF) technology allows for • Pinless, non-destructive detection of moisture content in building materials • Detects moisture content up to 3/4" (19 mm) deep • Easy viewing with bright reverse-contrast display • 9 LED bars indicate moisture range materials with mode button; drywall, masonry, • Easy-to-select hardwood, and softwood • Hold, Low Battery, and Auto-Power off functions • Built to withstand a 6.6" (2 m) drop
CASES
METER
TESTER
Tradesman Pro™ Hard Cases
• Constructed of black 600d nylon a heavy-duty PVC zipper and zinc alloy • Has zipper tag case has exceptional resistance to • The abrasions, punctures, and tears storage for Klein Tools clamp • Convenient meters, digital multimeters, and other test
shell protects tools, meters, • Hard small parts and tech devices • Soft interior lining • Durable zipper closure
and measurement products
5184
Cat. No. 69401
Number of Pockets 1
Overall Length 9.25" (23.5 cm)
Overall Width 4.00" (10.2 cm)
Cat. No. Number of Pockets Overall Length Overall Height 5184 1 8.75" (22.2 cm) 2.25" (5.7 cm) 5189 1 10.25" (26 cm) 2.25" (5.7 cm)
Power Tools and Accessories
Overall Width 6.50" (16.5 cm) 5.50" (14 cm)
Tradesman Pro™ Carrying Cases
• Two layers of padding protect even delicate instruments • Heavy-duty zipper and rugged PVC coated polyester for durability • Pockets for quick access and organization • Cat. No. 69406 has loop with snap closure to attach to belts, bags and backpacks Nos. 69407 and 69408 have sturdy handle with box stitching for secure transportation • Cat. and convenient hanging • Cat. Nos. 69406 and 69407 recommended for meters, testers, infrared guns, and small tools • Cat. No. 69408 recommended for meters, testers, infrared guns, tools, and borescopes • Made in the USA with global components Overall Height 2.25" (5.7 cm) 4" (10 cm) 4.75" (12 cm)
Overall Width 9" (22.9 cm) 10.25" (26 cm) 10.25" (26 cm)
69406
69407
69408
CONTACT
VOLTAGE
Overall Length 4.75" (12 cm) 6.25" (15.9 cm) 7.25" (18.4 cm)
TESTERS
Number of Pockets 1 2 2
NON-
Cat. No. 69406 69407 69408
Dual-Range High Voltage Non-Contact Tester
Broad-Range Non-Contact Tester
• • • •
• Use to check for the presence of voltage in overhead conductors or to find faults in cables 7 sensitivity ranges up to 230kV AC (240V, 4.2kV, 15kV, 25kV, 35kV, 69kV, • 115kV, 230kV) • Includes durable carrying case and universal/shotgun adapter
Use to check for the presence of voltage in overhead conductors or to find faults in cables LOW range for 50V AC to 1.5kV AC HIGH range for 1.5kV AC to 132kV AC Includes durable carrying case and (1) 9 volt battery
Universal / Shotgun Adapter included Visual signal indicates presence of voltage
Lifting, Pulling, and Structural
5189
69401
HIGH
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement
Carrying Case
HVNCVT-1
Cat. No. HVNCVT-1
274
Overall Length 13.00" (33 cm)
Voltage Low: 50V AC - 1.5kV AC High: 1.5kV AC - 132kV AC
www.kleintools.com > 800-553-4676
HVNCVT-2
Cat. No. HVNCVT-2
Overall Length 10.39" (26 cm)
Voltage Up to 230kV AC
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories
Drill Bits
Power Tools and Accessories
Blades
Test and Measurement
Holemaking
Voice/Data/Video
Cable cutters, crimpers and impact wrench engineered to help linemen work more efficiently by reducing time and effort on the job. All with the performance and durability professionals expect from Klein.
Tool Storage
POWER TOOLS & ACCESSORIES
Battery-Operated • Impact Drills • Impact Wrenches • Cutters • Crimpers • Lighting
Lifting, Pulling, and Structural
IMPACT TOOLS
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
20V LITHIUM-ION
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
DEWALT is a registered trademark of the Black and Decker Corporation.
Impact Tools 210 ft-lbs. of torque for professional • Featuring impact fastening and drilling designs provide excellent balance and control in • Compact tight spaces or overhead applications • Engineered and designed by Klein Tools in the USA rated for installing and removing threaded fasteners • Impact into wood, metal and concrete features a 1/2" male square drive with a pin • BAT20CW detente design for maximum socket retention • Kits include 4 Ah Batteries, a charger and bag BAT20CD Cat. No. BAT20CD1
Description 1/4" Compact Impact Driver Kit
BAT20CD
1/4" Compact Impact Driver, Tool Only
BAT20CW1
1/2" Compact Impact Wrench Kit
BAT20CW
1/2" Compact Impact Wrench, Tool Only
Drive Size
Socket Size
Points
3/4" x 9/16"
12
Maximum Speed
Voltage
Included (2) 4 Ah Batteries, Charger and Bag
210 ft-lbs Torque
2200 RPM
20V Lithium-Ion
Tool Only
1/2" Pin Detent
www.kleintools.com > 800-553-4676
(2) 4 Ah Batteries, Charger and Bag Tool Only
2-in-1 Coated Impact Socket • 20% lighter than traditional impact sockets* • Blue coating is easy to spot in a crowded tool bag • Durable plastic coating protects against damage due to scratching and abrasion
Cat. No. 66030 66031
276
Rating
1/4" Hex Quick Connect
3-in-1 Slotted Impact Socket an alignment slot to tighten and • Features loosen most hot-line clamps • Patent pending design
Cat. No. 66031
BAT20CW1
Socket Size
Points
3/4" x 9/16"
12
*As compared to Klein Tools 66001 socket.
66030
Pliers
Impact Tools
Socket Sizes
66001
3/4" x 9/16"
z
z
—
—
66012
5/8" x 7/16"
z
z
—
—
66014
7/8" x 11/16"
z
z
—
—
66011
1/2" x 3/8"
z
z
—
—
66015
1" x 13/16"
z
—
—
—
66016
1-1/8" x 15/16"
z
—
—
—
66041
1/4" Hex x 1/2" Square Adapter
—
z
z
—
66051E
17 mm x 13 mm
—
—
z
—
66052E
24 mm x 19 mm
—
—
z
—
66053E
30 mm x 22 mm
—
—
z
—
66054E
32 mm x 27 mm
—
—
z
—
66004
3/4" x 9/16"
—
—
—
z
66062
5/8" x 7/16"
—
—
—
z
66064
7/8" x 11/16"
—
—
—
z
66061
1/2" x 3/8"
—
—
—
z
66065
1" x 13/16"
—
—
—
z
66066
1-1/8" x 15/16"
—
—
—
z
66010
66040 66050E
66060
Tool Kits Safety, PPE and Comfort
66050E Metric
Cat. No.
Conduit Tools and Measurement
66040 Imperial
6-Point Set
Drivers and Wrenches
66010
12-Point Sets
Strippers, Cutters, and Crimpers
2-in-1 Impact Socket Sets set consists of commonly used impact socket sizes in utility, electrical and • Each construction work • Each socket feature two sizes in one tool • Deep socket with a 1/2" drive works great for pole hardware installation and removal • Replacement sockets sold separately
NOTE: Read and follow safety instructions in power tool owner's manual.
Jobsite Accessories
NRHDA4
NRHD3
Overall Length 7.75" (19.7 cm) 10" (25.4 cm) 9" (22.9 cm) 4.906" (12.5 cm) 2.469" (6.3 cm) 2.75" (7 cm)
Power Tools and Accessories
Socket Size 3/4", 1", 1-1/8" to 1-1/8" (28.6 mm) Square Square - 3/4", 13/16", 1", 1-1/8" 7/16" 1/2" 1/2" Male Square
NRHD4
Test and Measurement
Description 3-in-1 Impact Socket Single-Ended Impact Socket 4-in-1 Square Impact Socket Adapter for NRHD Adapter for NRHD3 Adapter for NRHD4
NOTE: Read and follow safety instructions in power tool owner's manual.
www.kleintools.com > 800-553-4676
277
Lifting, Pulling, and Structural
NOTE: Read and follow safety instructions in power tool owner's manual.
Voice/Data/Video
NRHD
NRHDA
Cat. No. NRHD NRHD3 NRHD4 NRHDA NRHDA3 NRHDA4
NRHDA3
Tool Storage
Impact Sockets • Features fine-tuned ball detent provides improved retention, minimizing drops • Long hollow shaft allows use on long threaded bolts • Quick-change adapter included on all sockets • Adapters extend or retract head for easy access to the size you need • Do not exceed 200 ft-lb of torque
Pliers Strippers, Cutters, and Crimpers
Impact Wrench • Designed for professional impact fastening and drilling applications to 500 ft-lbs of max torque for driving fasteners • Up into wood, metal and concrete • 7/16" Quick-Release Chuck • 0-1900 RPM variable speed trigger • Safety lockout switch
Conduit Tools and Measurement
Drivers and Wrenches
Impact Tools
Tool Kits
BAT20-7161
Description Impact Wrench, 7/16" Tool Only
BAT20-7161
Impact Wrench Kit, 7/16"
Drive Size
Rating
Maximum Speed
Voltage
Included —
7/16" Quick-Release
500 ft-lbs Torque
1900 RPM
20V Lithium-Ion
(2) 4 Ah Batteries, Charger and Bag
90° Impact Wrench • Right angle impact wrench provides versatility for better reach around a utility pole with less effort • Up to 300 ft-lbs of max torque for driving fasteners into wood, metal and concrete • Patent pending bolt-through hole design for longer bolts • Engineered and designed by Klein Tools in the USA • Work light illuminates darker spaces • Kit includes two 4 Ah Batteries, a charger and bag
Patent Pending Through Hole Design for longer bolts
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Cat. No. BAT20-716
BAT20LWA
Cat. No. BAT20LW1 BAT20LW
Description 90° Impact Wrench Kit 90° Impact Wrench, Tool Only
Drive Size
Rating
Maximum Speed
Voltage
1-1/8", 1", 13/16", 3/4" Square
300 ft-lbs
1800 RPM
20V Lithium-Ion
Lifting, Pulling, and Structural
Power Tools and Accessories
Accessories Cat. No.
Description
BAT20LWA Cat. No.
Description
BAT20LWS
278
7/16" Adapter for 90° Impact Wrench Replacement Socket for 90° Impact Wrench
www.kleintools.com > 800-553-4676
Drive Size 7/16" Drive Size 1-1/8"
Socket Size Number of Points 3/4", 13/16"
4
BAT20LWS
Included Tool, (2) 4 Ah Batteries, Charger and Bag Tool Only
BAT20LW1
Strippers, Cutters, and Crimpers
CUTTERS/CRIMPERS
Pliers
Drivers and Wrenches Conduit Tools and Measurement Tool Kits
20V LITHIUM-ION DEWALT is a registered trademark of the Black and Decker Corporation.
Jobsite Accessories
A
labl vai e i
4 AMP
CLOSED JAW MODELS
Tool Storage
EHS - 1/2"
OPEN JAW MODELS
n
GROUND ROD - 5/8"
Safety, PPE and Comfort
Gear-Driven Cable Cutters • One tool cuts copper, aluminum, ACSR and EHS • Replaceable insert blades • Open- and closed- jaw styles • Two work lights illuminate dark spaces • Safety lockout switch
2 AMP
COPPER
ALUMINUM
REPLACEMENT JAWS AVAILABLE
Description EHS Closed-Jaw Cutter, 2 Ah EHS Closed-Jaw Cutter, 4 Ah Cu/Al Closed-Jaw Cutter, 2 Ah
Copper 750 MCM 750 MCM 1000 MCM*
Aluminum 1500 MCM 1500 MCM 1500 MCM
ACSR 1590 MCM 1590 MCM —
Guy Strand 0.5" (1.3 cm) EHS 0.5" (1.3 cm) EHS —
Ground Rod 5/8" 5/8" —
600 MCM 400 MCM 750 MCM 600 MCM 750 MCM 1000 MCM
1500 MCM 900 MCM 1500 MCM 1000 MCM 1500 MCM 1500 MCM
1590 MCM 795 MCM — — 1590 MCM —
— — — — 1/2" (1.3 cm) EHS —
— — — — 5/8" 5/8"
Included (2) 2 Ah Batteries, Charger and Bag (2) 4 Ah Batteries, Charger and Bag (2) 2 Ah Batteries, Charger and Bag
Weight 8.2 lb (3.7 kg) 15 lb (6.8 kg) 8.2 lb (3.7 kg)
— — — — (2) Blades, (4) Screws, (4) Washers (2) Blades, (4) Screws, (4) Washers
2.72 lb (1.23 kg) 4.71 lb (2.14 kg) 1.66 lb (0.75 kg) 4.60 lb (2.09 kg) 6.6 oz (186 g) 6.6 oz (186 g)
Test and Measurement
Maximum Cable Capacity
Cat. No. BAT20-GD1 BAT20-GD14H BAT20-GD10
Voice/Data/Video
BAT20-GD1
ACSR
Replacement Jaw
ACSR Closed-Jaw Cutter ACSR Open-Jaw Cutter Cu/Al Closed-Jaw Cutter Cu/Al Open-Jaw Cutter EHS Closed-Jaw Cutter Cu/Al Closed-Jaw Cutter
Power Tools and Accessories
BAT20-G4 BAT20-G5 BAT20-G8 BAT20-G9 BAT20-GD4BEHS BAT20-GD4BAC
*1000 MCM is soft copper grade only
279
Lifting, Pulling, and Structural
> 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Cutters/Crimpers 7-Ton Combination Cable Cutter/Crimpers • 1 tool with 6 heads to meet different job requirements • Handles copper, aluminum, ACSR, EHS guy strand and steel bolts • 7-ton hydraulic force provides 15% more cutting and crimping power than similar models on th • Compatible with industry standard W-style dies • 2 work lights illuminate darker spaces • Green light indicator to confirm a good crimp has been made
Conduit Tools and Measurement
COPPER
ALUMINUM
labl vai e i
A
EHS - 7/16" GRADE 8 BOLTS
4 AMP
Safety, PPE and Comfort
BAT20-7T14
Cat. No. BAT20-7T BAT20-7T4H
600 MCM
350 MCM
477 MCM
—
—
BAT20-7T14H Crimper, BG Die/D3 Groove, 4 Ah
600 MCM
350 MCM
477 MCM
—
—
— — — — — — 7/16" EHS 7/16" EHS — — 7/16" EHS
— — — — — — 3/8" Grade 8 3/8" Grade 8 — — 3/8" Grade 8
7/16" EHS
3/8" Grade 8
—
—
Jobsite Accessories Tool Storage Voice/Data/Video
BAT20-7T2 BAT20-7T24H BAT20-7T3 BAT20-7T34H BAT20-7T4 BAT20-7T44H BAT20-7T5 BAT20-7T54H BAT20-7T13 BAT20-7T134H BAT20-7T14
Cable Crimper, D3 Groove, 2 Ah Cable Crimper, D3 Groove, 4 Ah Cable Cutter, Cu/Al, 2 Ah Cable Cutter, Cu/Al, 4 Ah Cable Cutter, ACSR, 2 Ah Cable Cutter, ACSR, 4 Ah Bolt Cutter, Steel, 2 Ah Bolt Cutter, Steel, 4 Ah Cutter/Crimper, No Heads, 2 Ah Cutter/Crimper, No Heads, 4 Ah Cable Cutter/Crimper Kit, 2 Ah
600 MCM 350 MCM 477 MCM 600 MCM 350 MCM 477 MCM 750 MCM 1000 MCM — 750 MCM 1000 MCM — 500 MCM 500 MCM 556 MCM 500 MCM 500 MCM 556 MCM — — — — — — — — — — — — 750 MCM Cut; 1000 MCM Cut; 556 MCM Cut; 600 MCM Crimp 350 Crimp 477 Crimp BAT20-7T144H Cable Cutter/Crimper Kit, 4 Ah 750 MCM Cut; 1000 MCM Cut; 556 MCM Cut; 600 MCM Crimp 350 MCM Crimp 477 MCM Crimp BAT20-7T23 Cable Crimper, O+ Die Head, 2 Ah 600 MCM 350 MCM 477 MCM
Test and Measurement
BAT20-7T234H Cable Crimper, O+ Die Head, 4 Ah
Power Tools and Accessories
Copper — 600 MCM
Maximum Cable Capacity Aluminum ACSR Guy Strand — — — 350 MCM 477 MCM —
Description Cutter/Crimper, Tool Only Cut/Crimper, BG Die/D3 Groove/ ACSR/EHS Crimper, BG Die/D3 Groove, 2 Ah
BAT20-7T1
Lifting, Pulling, and Structural
n
Tool Kits
ACSR
Bolt — —
Included Bag BG and D3 Crimping Jaw, ACSR & EHS Cutting Jaw, (2) 4 Ah Batteries, Charger and Bag BG Fixed Die and D3 Groove Head, (2) 2 Ah Batteries, Charger and Bag BG Fixed Die and D3 Groove Head, (2) 4 Ah Batteries, Charger and Bag D3 Groove Head, (2) 2Ah Batteries, Charger and Bag D3 Groove Head, (2) 4Ah Batteries, Charger and Bag Cutting Jaw, (2) 2 Ah Batteries, Charger and Bag Cutting Jaw, (2) 4 Ah Batteries, Charger and Bag Cutting Jaw, (2) 2 Ah Batteries, Charger and Bag Cutting Jaw, (2) 4 Ah Batteries, Charger and Bag Cutting Jaw, (2) 2 Ah Batteries, Charger and Bag Cutting Jaw, (2) 4 Ah Batteries, Charger and Bag (2) 2 Ah Batteries, Charger and Bag (2) 4 Ah Batteries, Charger and Bag (3) Cutting Jaws, (3) Crimping Jaws, (2) 2 Ah Batteries, Charger and Bag (3) Cutting Jaws, (3) Crimping Jaws, (2) 4 Ah Batteries, Charger and Bag O Fixed Die/D3 Groove Crimping Jaw, (2) 2 Ah Batteries, Charger and Bag O Fixed Die/D3 Groove Crimping Jaw, (2) 4 Ah Batteries, Charger and Bag
2 AMP
Weight 7.15 lb (3.24 kg) 25.73 lb (11.7 kg) 15.7 lb (7.1 kg) 17.15 lb (7.8 kg) 15.4 lb (7.0 kg) 17.15 lb (7.8 kg) 15.74 lb (7.14 kg) 17.19 lb (7.8 kg) 16.03 lb (7.27 kg) 17.15 lb (7.8 kg) 15.9 lb (7.2 kg) 17.35 lb (7.9 kg) 12.49 lb (5.67 kg) 13.72 lb (6.2 kg) 32.1 lb (14.6 kg) 33.5 lb (15.2 kg) 15.7 lb (7.1 kg)
600 MCM
350 MCM
477 MCM
—
—
17.15 lb (7.8 kg)
600 MCM
350 MCM
477 MCM
—
—
—
3.2 lb (1.5 kg)
600 MCM 600 MCM
350 MCM 350 MCM
477 MCM 477 MCM
— —
— —
— —
2.9 lb (1.3 kg) 3.18 lb (1.44 kg)
750 MCM 500 MCM —
1000 MCM 500 MCM —
— 556 MCM —
— — 7/16" EHS
— — 3/8" Grade 8
— — —
3.2 lb (1.5 kg) 3.5 lb (1.6 kg) 3.5 lb (1.6 kg)
750 MCM 500 MCM —
1000 MCM 500 MCM —
— 556 MCM —
— — 7/16" EHS
— — 3/8" Grade 8
— — —
5.6 oz (159 g) 6.4 oz (181 g) 6.4 oz (181 g)
Replacement Jaw
BAT20-7T6 BAT20-7T7 BAT20-7T12 BAT20-7T9 BAT20-7T10 BAT20-7T11
Crimping Jaw, Fixed BG Die/D3 Groove Crimping Jaw, D3 Groove Crimping Jaw, Fixed O Die/D3 Groove Cutting Jaw, Cu/Al Cutting Jaw, ACSR Cutting Jaw, Steel
Replacement Blades
BAT20-7T16 BAT20-7T17 BAT20-7T18
280
Cu/Al Cutting Head ACSR Cutting Head Steel Cutting Head
www.kleintools.com > 800-553-4676
Pliers
Crimper
Strippers, Cutters, and Crimpers Drivers and Wrenches
12-Ton Crimper • 360° rotating head for flexibility in crimping positions • Green light indicates full pressure confirming a good crimp has been made • 4 working lights for dark spaces • Compatible with industry standard U-style dies • Safety lockout switch COPPER
Conduit Tools and Measurement
ALUMINUM
ACSR
Tool Kits
BAT20-12T1651
Description 12-Ton Crimper with Case 12-Ton Crimper Kit
Copper 8 AWG to 750 MCM 8 AWG to 750 MCM
Maximum Cable Capacity Aluminum 8 AWG to 750 MCM 8 AWG to 750 MCM
ACSR 556 MCM 556 MCM
Included Weight C-Style Head and Case 24.5 lb (11.1 kg) C-Style Head, (2) 2 Ah Batteries, Charger and Case 28.2 lb (12.8 kg)
Safety, PPE and Comfort
Cat. No. BAT20-12T165 BAT20-12T1651
Jobsite Accessories Tool Storage
Utility LED Light • For optimal lighting on the worksite • Clamps to the corner and straight walls of utility buckets • Flood, Spot, Flood-Spot settings up to 2500 Lumens • IP56 rating on battery compartment • Kit includes light, two 4 Ah batteries and charger
Voice/Data/Video
900
Cat. No.
SPOT/FLOOD
2500
1600
5h
3.5h
Description
BAT20UBL
Utility LED Light
BAT20UBL1
Utility LED Light Kit
IP56
BAT20UBL1
Lumens • Spot: 900 Lumens - 8.5 hours (using 20V 4Ah battery) • Flood: 1600 Lumens - 5 hours (using 20V 4Ah battery) • Spot + Flood: 2500 Lumens - 3.5 hours
Power Tools and Accessories
8.5h
FL 1 STANDARD FLOOD
Test and Measurement
SPOT
Included
Light Light, 4 AH batteries (2x) and charger
281
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
HOLE SAWS
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Bi-Metal Hole Saws and Arbors Bi-Metal Hole Saws Optimized for cutting steel including stainless steel Cuts precise holes in stainless steel and mild steel, drywall, ceiling tile, laminates, wood and plastic Multiple slots provide different leverage points to easily remove material Heavy-duty steel construction includes 5 mil back plate to withstand abuse The smallest hole saws feature hex-shaped base for easy removal from arbor Arbors For use with electric drill sizes 1/2" (1.3 cm) and larger Fast and easy to engage and disengage hole saws Steel construction for long life 31906 118° split point pilot bits Cat. No. 31905 includes arbor adapter for use with hole saws 1-3/8" (3.5 cm) and larger Hardened mandrels for long thread life
31922
• • • • • • • • • • •
Cat. No. 31914 31918 31922 31928 31932 31940 31944 31948 31958 31972 31900
Hole Diameter 7/8" (2.2 cm) 1-1/8" (2.9 cm) 1-3/8" (3.5 cm) 1-3/4" (4.5 cm) 2" (5.1 cm) 2-1/2" (6.4 cm) 2-3/4" (7 cm) 3" (7.6 cm) 3-5/8" (9.2 cm) 4-1/2" (11.4 cm) 6-3/8" (16.2 cm)
Pipe Tap Size* 3/4" (1.9 cm) 1" (2.5 cm) — 1-1/2" (3.8 cm) — — — — — — —
Pipe Entrance Size** 1/2" (1.3 cm) 3/4" (1.9 cm) 1" (2.5 cm) 1-1/4" (3.2 cm) 1-1/2" (3.8 cm) 2" (5.1 cm) — 2-1/2" (6.4 cm) 3" (7.6 cm) 4" (10.2 cm) 6" (15.2 cm)
31932 31914 with 31905 arbor
31905
For Use With 31905 31905 31905 or 31906 31906 31906 31906 31906 31906 31906 31906 31906
Electrician’s Hole Saw Kits 31902 8-Pc 32905 5-Pc z z z z z z
z z z
— — — — —
— — — — — — — —
z z
—
—
z
Hole-Saw Arbor Bits
Cat. No. 31905 31906
Thread Length 1/2"-20 5/8"-18
Shank Diameter 3/8" 7/16"
Pins N Y
For Use With All Klein Hole Saws Klein Hole Saws 1-3/8" to 6-6/8" (2.6 to 17.1 cm)
z
Replacement Part
Cat. No. 31907
Description Replacement Pilot Bit, 1/4" x 3-1/2"
* Pipe Tap Size - The sizes listed provide the necessary information whenever a pipe is to be threaded into tanks, boilers, etc. To secure the best results, the hole should be reamed before tapping with a reamer having a taper of 3/4" per foot. **Pipe Entrance Size - The sizes listed provide the necessary information for any given pipe size to have sufficient clearance to pass through beams, walls, bulkheads, etc.
282
www.kleintools.com > 800-553-4676
Sets includes rust-proof molded case
NOTE: Read and follow safety instructions in power tool owner's manual.
Pliers
Hole Saws
Strippers, Cutters, and Crimpers
Carbide Hole Cutters • Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16" (0.5 cm) thick • Smooth start pilot drill bit for greater control • Split point pilot drill bit prevents bit walking • Integrated flange prevents the operator from drilling beyond the sheet metal • Ejection spring for easy slug removal Carbide Hole Cutter Sets 31872 4-Pc 31873 8-Pc — —
Conduit Sizes — 1/2" (1.3 cm) 3/4" (1.9 cm) 1" (2.5 cm) 1-1/4" (3.2 cm) 1-1/2" (3.8 cm) 2" (5.1 cm)
z z z
— — —
z z z z z z
z
zz
Conduit Tools and Measurement
Hole Diameter 3/4" (1.9 cm) 7/8" (2.2 cm) 1-1/8" (2.9 cm) 1-3/8" (3.5 cm) 1-3/4" (4.5 cm) 2" (5.1 cm) 2-1/2" (6.4 cm)
Drivers and Wrenches
Cat. No. 31850 31852 31856 31860 31866 31868 31870
31860
Replacement Part
Tool Kits
Cat. No. Description 31874 Replacement Hole Cutter Pilot Bit
Sets includes rust-proof molded case
Jobsite Accessories
53731
Range 2" to 7" (5.1 to 17.8 cm)
Tool Storage
Cat. No. 53731
Safety, PPE and Comfort
Adjustable Hole Saw • Quickly and smoothly cuts cleaner holes in drywall and ceiling tiles • Blades adjust to cut holes from 2" to 7" (5 to 18 cm) in diameter • Fits most drill chucks 3/8" and 1/2" (0.95 and 1.3 cm) in diameter • No binding while cutting • No additional tools needed to adjust the hole saw • Dust shield catches ceiling debris (2 included) • Hex-key included
Reciprocating Saw Blades
Teeth Per Inch 6 6 6 10/14 10/14 14 14 18 18 24
31728
Blade Length 6" (15.2 cm) 9" (22.9 cm) 12" (30.5 cm) 6" (15.2 cm) 8" (20.3 cm) 6" (15.2 cm) 9" (22.9 cm) 6" (15.2 cm) 8" (20.3 cm) 6" (15.2 cm)
Blade Width 0.75" (1.9 cm) 0.75" (1.9 cm) 0.75" (1.9 cm) 0.75" (1.9 cm) 0.75" (1.9 cm) 0.75" (1.9 cm) 1" (2.5 cm) 0.75" (1.9 cm) 0.75" (1.9 cm) 0.75" (1.9 cm)
Blade Thickness 0.050" (1.27 mm) 0.050" (1.27 mm) 0.050" (1.27 mm) 0.050" (1.27 mm) 0.050" (1.27 mm) 0.035" (0.89 mm) 0.042" (1.07 mm) 0.035" (0.89 mm) 0.035" (0.89 mm) 0.035" (0.89 mm)
Package Quantity 5 5 5 5 5 5 5 5 5 5
NOTE: Read and follow safety instructions in power tool owner's manual.
www.kleintools.com > 800-553-4676
283
Lifting, Pulling, and Structural
NOTE: Read and follow safety instructions in power tool owner's manual.
Power Tools and Accessories
Application Wood with Nails Wood, Wood with Nails Wood with Nails Wood with Nails, Heavy Gauge Metals Wood with Nails, Heavy Gauge Metals Heavy Gauge Metals Heavy Gauge Metals Heavy Gauge Metals Heavy Gauge Metals 18 Gauge and Under
31716
Test and Measurement
Cat. No. 31716 31751 31761 31731 31741 31727 31755 31728 31739 31734
Voice/Data/Video
Reciprocating Saw Blades • Bi-metal blades offer different cutting applications of steel and wood • Bi-metal construction for long cutting life • Heat and wear resistant • Shock resistant teeth resist strippage • 1/2" universal shank to fit all popular reciprocating saw tools • Made in USA
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
DRILL BITS
High-visibility silver step rings!
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Double-Fluted High-Speed Step Drill Bits • Two flutes cut faster and keep bit cooler • Easy-to-read silver step rings save time when drilling common holes • Fast-starting, non-walking drill tip extra-long 3/8" hex shank provides a firm, • Thick, positive grip in the drill and won’t spin out
Cat. No. KTSB01 KTSB03 KTSB11 KTSB14 KTSB15
Quick Reference #1 #3 #11 #14 #15
Number of Holes 13 9 2 12 3
Increment 1/32" (0.8 mm) 1/16" (1.6 mm) — 1/16" (1.6 mm) —
Size 1/8" to 1/2" (3.2 to 12.7 mm) 1/4" to 3/4" (6.4 to 19.1 mm) 7/8" to 1-1/8" (22.2 to 28.6 mm) 3/16" to 7/8" (4.8 to 22.2 mm) 7/8" to 1-3/8" (22.2 to 34.9 mm)
Ship-Auger Bits with Screw Point • Drills through nails, wood, vinyl, plastics and heavy timber bit steel with machine-ground flutes and polished • Special edges for smooth, wobble-free boring • Full length is heat-treated and tempered • Deep, open-throat design clears chips for faster, cleaner cuts • 7/16" hex shafts fit 1/2" and larger three-jaw chucks and twist are ground to correct clearance for easy removal • Head from hole heavy construction and repair work in mines, on docks and • For bridges, as well as electrical work
284
www.kleintools.com > 800-553-4676
KTSB01
KTSB03
KTSB11
KTSB14
KTSB15
53402
Cat. No. 53402 53404 53406 53408
Bit Diameter 3/4" (19 mm) 7/8" (22 mm) 1" (25 mm) 1-1/8" (29 mm)
Twist Length 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
NOTE: Read and follow safety instructions in power tool owner's manual.
Overall Length 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm) 6" (15.2 cm)
Pliers
Drill Bits
Strippers, Cutters, and Crimpers
Bit Diameter 3/8" (10 mm) 3/8" (10 mm) 9/16" (14 mm) 3/4" (19 mm) 3/4" (19 mm) 1" (25 mm)
53719
Overall Length 54" (137.2 cm) 72" (182.9 cm) 54" (137.2 cm) 54" (137.2 cm) 72" (182.9 cm) 54" (137.2 cm)
53718
Conduit Tools and Measurement
Cat. No. 53716 53717 53718 53719 53751 53720
53720
Drivers and Wrenches
Flex Bit Augers • Used to drill holes through wood within a wall • Tapered back for easy bit retrieval • Spring steel shaft resists deformation • Screw point tip pulls the bit through wood • Hole in tip allows for use with wire or cable pulling grip
53716
Tool Kits 53722
Connection Diameter 5/8" (1.6 cm) 7/16" (1.1 cm)
For Use With 3/4" (1.91 cm) and Larger 9/16" (1.43 cm) and Smaller
Overall Length 54" (137.2 cm) 54" (137.2 cm)
Jobsite Accessories
Cat. No. 53722 53723
Safety, PPE and Comfort
Flex Bit Extensions • Connects to the end of a flex bit and extends the length
53721
Included Flex Bit Placement Tool, Flex Drill Bit - 9/16" x 54" (1.4 x 137.2 cm), Pulling Grip - 1/2" - 9/16" (1.3 - 1.4 cm)
Test and Measurement 53715SEN
Overall Length 11" (27.9 cm)
www.kleintools.com > 800-553-4676
285
Lifting, Pulling, and Structural
NOTE: Read and follow safety instructions in power tool owner's manual.
Power Tools and Accessories
Flex Bit Placement Tool • For use with flexible drill bits • Positions flexible drill bits horizontally or vertically within a wall • Cushion-Grip handle for non-slip comfort • Folding design stores more compactly than standard tool Cat. No. 53715SEN
Voice/Data/Video
Cat. No. 53721
Tool Storage
Flex Bit Kit kit includes folding placement tool, 1/2"-9/16" (1.3 - 1.4 cm) • 3-piece O.D. pulling grip and 9/16" x 54" (1.4 x 137.2 cm) flexible drill bit • Everything you need to pull up to 9/16" (1.4 cm) O.D. wire • Complete kit used for drilling and pulling wire and cable • Use placement tool (Cat. No. 53715SEN) to guide bit through walls • Flexible drill bit (Cat. No. 53718) makes 9/16" (1.4 cm) holes in wood grip attaches to the flexible drill bit after the hole has been • Pulling made and pulls 1/2"-9/16" (1.3 - 1.4 cm) wire and cable
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Drill Bits Regular-Point 118° High-Speed Drill Bits • General-purpose, high-speed bits for reliable performance in a wide range of materials • Standard jobber length • Black-oxide finish reduces chip welding • Lightly roughened surface has higher lubricity for easier chip flow • Made in USA Cat. No. 53100 53101 53102 53103 53104 53105 53106 53107 53108 53109 53110 53111 53112 53113 53114 53115 53116 53117 53118 53119 53120 53121 53122 53123 53124 53125 53126 53127 53128
Overall Length 1.875" (4.8 cm) 2" (5.1 cm) 2.25" (5.7 cm) 2.625" (6.7 cm) 2.75" (7 cm) 2.875" (7.3 cm) 3.125" (7.9 cm) 3.25" (8.3 cm) 3.5" (8.9 cm) 3.625" (9.2 cm) 3.75" (9.5 cm) 3.875" (9.8 cm) 4" (10.2 cm) 4.125" (10.5 cm) 4.25" (10.8 cm) 4.375"(11.1 cm) 4.5" (11.4 cm) 4.625" (11.8 cm) 4.75" (12.1 cm) 4.875" (12.4 cm) 5" (12.7 cm) 5.125" (13 cm) 5.25" (13.3 cm) 5.375" (13.7 cm) 5.5" (14 cm) 5.625" (14.3 cm) 5.75" (14.6 cm) 5.875" (14.9 cm) 6" (15.2 cm)
Bit Diameter 1/16" (1.59 mm) 5/64" (2.0 mm) 3/32" (2.4 mm) 7/64" (2.8 mm) 1/8" (3.2 mm) 9/64" (3.6 mm) 5/32" (4.0 mm) 11/64" (4.4 mm) 3/16" (4.8 mm) 13/64" (5.2 mm) 7/32" (5.6 mm) 15/64" (6.0 mm) 1/4" (6.4 mm) 17/64" (6.7 mm) 9/32" (7.1 mm) 19/64" (9.1 mm) 5/16" (7.9 mm) 21/64" (8.3 mm) 11/32" (8.7 mm) 23/64" (9.1 mm) 3/8" (9.5 mm) 25/64" (9.9 mm) 13/32" (10.3 mm) 27/64" (10.7 mm) 7/16" (11.1 mm) 29/64" (11.5 mm) 15/32" (11.9 mm) 31/64" (12.3 mm) 1/2" (12.7 mm)
Flute Length 0.875" (2.2 cm) 1" (2.5 cm) 1.25" (3.2 cm) 1.5" (3.8 cm) 1.625" (4.1 cm) 1.75" (4.5 cm) 2" (5.1 cm) 2.125" (5.4 cm) 2.313" (5.9 cm) 2.438" (6.2 cm) 2.5" (6.4 cm) 2.625" (6.7 cm) 2.75" (7 cm) 2.875" (7.3 cm) 2.938" (7.5 cm) 3.0625" (7.8 cm) 3.188" (8.1 cm) 3.313" (8.4 cm) 3.438" (8.7 cm) 3.5" (8.9 cm) 3.625" (9.2 cm) 3.75" (9.5 cm) 3.875" (9.8 cm) 3.938" (10 cm) 4.063" (10.3 cm) 4.188" (10.6 cm) 4.313" (11 cm) 4.375" (11.1 cm) 4.5" (11.4 cm)
53128
53000 29-Pc
Drill Bit Sets 53001 15-Pc
z z z z z z z z z z z z z z z z z z z z z z z z z z z z z
z
— z
— z
— z
— z
— z
— z
— z
— z
— z
— z
— z
— z
— z
— z
53002 13-Pc z z z z z z z z z z z z z
— — — — — — — — — — — — — — — —
Sets include hinged metal case with stand-up bit holder.
Drill/Tap/Deburr Set • For aluminum, brass, copper, plastic, and up to 10 gauge metal • 1/4" hex for easier application with quick connect • Set of 6 tap sizes plus two extra of the smallest taps • For use on up to 10 gauge metal • Made of high speed steel for added durability
Cat. No. 32237 32238 32239 32240 32241 32242
286
Tap Sizes 6-32 8-32 10-32 10-24 12-24 1/4-20
Drill/Tap/Deburr Set 32217 8-Pc
www.kleintools.com > 800-553-4676
zz zz z z z z
NOTE: Read and follow safety instructions in power tool owner's manual.
32217
NUT DRIVERS
SCREWDRIVERS /
BITS
DRILL
Drivers and Wrenches Conduit Tools and Measurement
32900
Hex Sizes Included 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"
Tool Kits
Description 7-in-1 Impact Flip Socket 7-in-1 Impact Flip Socket Set - No Handle 3-in-1 Impact Flip Socket, 3" (7.6 cm) Length 3-in-1 Impact Flip Socket, 5" (12.7 cm) Length 2-Piece Impact Flip Socket Set (includes 32766/32767)
1/4", 5/16" 32768
32907
Safety, PPE and Comfort Jobsite Accessories
26-Piece Pro Impact Power Bit Set • 4" (10.2 cm) bit extension with strong magnet to keep bits in place • S2 Impact-Rated Steel for maximum life • 1-1/4" (3.2 cm) precision machined bits are longer and easier to grip • 2-5/8" (6.7 cm) nut drivers reach easily into junction boxes • Extended 4" (10.2 cm) Phillips and Square bit for those hard-to-reach fasteners • Hidden loose bit storage and a spring-loaded stay-shut latch
32791 32792 32793 32794 32795 32796
Pro Impact Power Bit Extension 1/4" Pro Impact Power Nut Driver 5/16" Pro Impact Power Nut Driver 3/8" Pro Impact Power Nut Driver Assorted Pro Impact Power Bits Assorted Pro Impact Power Bits
32797 32798
Assorted Pro Impact Power Bits Assorted Pro Impact Power Bits
4" (10.2 cm) Bit Extension 1/4" Hex Nut Driver 5/16" Hex Nut Driver 3/8" Hex Nut Driver (2) #2 Phillips, (2) #2 Square #1 Phillips, #3 Phillips, #1 Square, #3 Square, #2 Combo, 3/16" (4.8 mm) Slotted, 1/4" (6.4 mm) Slotted #2 Square #2 Phillips
Package Quantity 1 3 3 3 4 7 5 5
32799
1-1/4" (3.2 cm) Length #1 x 2
#2 x 7
#3 x 1
#2 x 1 3/16" x 1 1/4" x 1
4" (10.2 cm) Length
2-5/8" (6.7 cm) Length
#2 x 1
1/4" x 1 5/16" x 1
#2 x 1
#1 x 2
#2 x 4
#3 x 1
4" (10.2 cm) Bit Extension
Test and Measurement
Included
3/8" x 1
Power Tools and Accessories
Magnetic Hex Drivers • For driving sheet metal screws • Strong Rare-Earth magnets for maximum holding • 1/4" hex shank with quick release groove Overall Length 1.75" (4.5 cm) 1.75" (4.5 cm) 1.75" (4.5 cm) 1.75" (4.5 cm)
86602
www.kleintools.com > 800-553-4676
287
Lifting, Pulling, and Structural
Description 1/4" Magnetic Hex Drivers, 3-Pack 5/16" Magnetic Hex Drivers, 3-Pack 3/8" Magnetic Hex Drivers, 3-Pack 5/16" Magnetic Hex Drivers, 10-Pack
Voice/Data/Video
Cat. No. Description
Tool Storage
Cat. No. Description 32799 Pro Impact Power Bit 26-Piece Set
Cat. No. 86600 86601 86602 8660110
Strippers, Cutters, and Crimpers
Cat. No. 32900 32907 32766 32767 32768
Pliers
Impact Flip Sockets • Patent-pending design with onboard storage • Quickly and easily change blade between a screwdriver handle and an impact driver 1/4" socket has both shallow (driver) and deep (bit holder) • Multi-function configurations for added versatility • Powerful Rare-Earth magnet securely holds bits and hex head fasteners • Detachable sockets allow for easy removal of metal shavings from magnet • Features 1/4" Quick-Connect adapter for easy use with an impact driver
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
Drill Bits Power Drivers machined, heat treated and finished to the gold standards Klein Tools • Precision puts into every screwdriver blade. Proprietary processes create the longest life
• •
power driver bit in the industry. Precision machined for better fit, more torque and less wear Custom heat treated for long life
PH2115
Cat. No. PH115 PH1355 PH162 PH2115 PH2355 PH262 PH315 PH3355 PH362 SL31615 SL316355 SL1415 SL14355
Klein Lasts Longer Before Cam Out
100 80 60 Klein
Tool Kits
PH362
40
Overall Length 1" (2.5 cm) 3.5" (8.9 cm) 6" (15.2 cm) 1" (2.5 cm) 3.5" (8.9 cm) 6" (15.2 cm) 1" (2.5 cm) 3.5" (8.9 cm) 6" (15.2 cm) 1" (2.5 cm) 3.5" (8.9 cm) 1" (2.5 cm) 3.5" (8.9 cm)
Competitor
Cat. No. 32234
Overall Length 3.5" (8.9 cm)
32235
6" (15.2 cm)
Safety, PPE and Comfort Jobsite Accessories
Power Nut Drivers • Hollow shaft magnetic nut drivers are designed for long bolts, studs or threaded rod jobs • Rare-Earth magnetic head holds nuts and bolts to aid in hard to reach installations 5" and 10" (13 cm and 25.4 cm) models feature a wrench assist end, designed for • The high torque loosening found in many jobs
Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories
Bit Type #1 Phillips #1 Phillips #1 Phillips #2 Phillips #2 Phillips #2 Phillips #3 Phillips #3 Phillips #3 Phillips 3/16" (4.8 mm) Slotted 3/16" (4.8 mm) Slotted 1/4" (6.4 mm) Slotted 1/4" (6.4 mm) Slotted
Package Quantity 5 5 2 15 5 2 5 5 2 5 5 5 5
Bit Type #1 and #2 Phillips, #1 and #2 Square, 3/16" Slotted #1 and #3 Phillips
Package Quantity 5
Power Driver Sets
20 0
2
Hollow magnetic shafts for nut running
PND7165 32759 PND71610
Cat. No. 32759 PND7165 PND125 PND9165 PND71610 PND91610
Nut Driver Sizes 1/4", 5/16", 3/8" 7/16" 1/2" 9/16" 7/16" 9/16"
Shaft Length 2" (5.1 cm) 5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm) 10" (25.4 cm) 10" (25.4 cm)
Hollow Depth 1.875" (4.8 cm) 3.688" (9.4 cm) 3.719" (9.5 cm) 3.625" (9.2 cm) 8.813" (22.4 cm) 8.625" (21.9 cm)
Overall Length 6.313" (16 cm) 6.313" (16 cm) 6.297" (16 cm) 6.328" (16.1 cm) 11.313" (28.7 cm) 11.313" (28.7 cm)
Anchors Conical Anchor Kit • For use on drywall or masonry • Kit contains: 100 #2 Phillips Screws, and 100 plastic anchors • 1/4" Masonry drill bit also included Cat. No. 53729
Lifting, Pulling, and Structural
SL31615
288
Anchor Size #10 - #12
Screw Size #10 x 1" (2.5 cm)
www.kleintools.com > 800-553-4676
Tip Size 1/4" (6 cm)
NOTE: Read and follow safety instructions in power tool owner's manual.
53729
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories
Block & Tackle
Voice/Data/Video
Structural Construction • Rebar • Concrete • Ironworker
Test and Measurement Power Tools and Accessories
Klein's wire pulling grips, block and tackle and structural/construction tools are highly engineered and manufactured to combine strength, safety and durability.
Tool Storage
LIFTING, PULLING AND STRUCTURAL
Wire Pulling Grips
289
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers Pliers
WIRE PULLING GRIPS
Lifting, Pulling, and Structural
Pliers
Wire Pulling Grips
Strippers, Cutters, and Crimpers
TYPES OF WIRE PULLING GRIPS Klein ChicagoTM, Parallel Jaw and Haven'sTM Grips are widely used in the power, communications, and general construction fields to pull wire and cable. The grips maintain temporary tension until the wire or cable can be permanently terminated.
Drivers and Wrenches
Chicago™ Grips Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand
1656-30
Single V Jaw Contour
Double V Jaw Contour
Round Jaw Contour
Aggressive Jaw Contour
Conduit Tools and Measurement
loop handles allow the jaws to be held in an open position for easy • Locking placement on wire or cable • Available in Round, Double V, Single V and Aggressive jaw contours
Tool Kits
Parallel Jaw Grips Lightweight compact grips pull an exceptionally wide range of cable types and sizes
Round Jaw Contour
Jobsite Accessories
Double V Jaw Contour
KT4500
Safety, PPE and Comfort
• Latch helps maintain cable position • Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks • Available in Round and Double V jaw contours
Haven's™ Grips Tool Storage
Designed for use when a light, compact grip is desired where conductor deformation is not a factor
• Knurled eccentric jaw applies gripping pressure to 1/4" of cable area • Some models include a swing latch that holds cable securely in jaw • Recommended for messenger and guy strand and wire rope • 1625 Series can be used for wire rope
1625-20
Voice/Data/Video
Hot-line Latch Designed for placing a grip on cable with a hot-line stick
Power Tools and Accessories
Wire Pulling Grips Warnings
Test and Measurement
• The three notches in the hot-line latch adjust the balance of the grip to better match the direction of the cable sag • When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire • Standard hot-line grips are not supplied with springs or lock-open features • Some grips are available with a positionable latch WARNING: Do not exceed rated capacity. WARNING: Always match proper size and type of grip to application. WARNING: Grips are to be used for temporary installation, not for permanent anchorage. WARNING: When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
WARNING: Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
291
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers
TYPES OF JAW CONTOURS Single V
1613-30
Conduit Tools and Measurement
(solid and stranded)
Double V
Tool Kits
contact provides • Four-point greater gripping pressure and
Safety, PPE and Comfort
•
assures proper alignment of wire and cable within the jaws Designed for high strength messenger and guy strand and extra high-strength cables and conductors
Round
Jobsite Accessories
•
minimize conductor deformation. (Smooth and knurled styles) Recommended for use on bare aluminum, and copper conductors
Aggressive
Tool Storage
Steel Strand Cat. No.
Wide Range of Cables Cat. No.
1613-40 and 1613-40H, 1628-16 1628-16AT (Bell System) 1628-17, 1628-18, 1684-5 1684-5AT (Bell System) 1684-5H, 1692-5 1692-5AT (Bell System) 1684-74 and S1684-74H (EHS Cable) 1684-5F
1671-10 1672-10 1686-10 1686-20
ACSR and AAC Cat. No. jaws provide maximum • Round contact and gripping power to
1628-16P SERIES 1628-30 SERIES 1628-40 SERIES 1628-50 SERIES 1656-20 and 1656-20H 1656-30 and 1656-30H 1656-40 and 1656-40H 1656-50 and 1656-50H 1656-60 and 1656-60H
Weatherproof and PVC Covered Copper Cat. No.
Steel Strand Cat. No.
Wide Range of Cables Cat. No. 1685-20 1685-31
Notched Jaw Serpentine Jaw 1659-20 1611-20 1659-30 1611-30 1659-40 1611-40 1659-50 1611-50
Serpentine Jaw 1659-5AT
Steel Strand Cat. No.
for use when • Recommended conductor deformation is not an issue or when a more aggressive bite is needed
Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Steel Strand Cat. No.
• Simple three-point contact jaws for use on small • Designed diameter bare wire and cable
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Wire Pulling Grips
1604-10 1604-20 1604-20L 1625-20 (For Wire Rope) 162520-1 (For Wire Rope) 162520-7/8 (For Wire Rope) 1684-5C (EHS)
Selecting the Proper Grip Grip Recommendation Klein Tools offers a service of recommending the proper grip for a particular application based on a sample of cable. This service is free of charge. All that we require is a minimum 6' to 9' (2-3 m) length of cable. If there is ever a question about the safe condition of any grip, please contact Klein Tools at 844.395.3235 or email:
[email protected] Three basic factors are needed in order to determine the proper grip for each specific application:
1. Type of wire or cable (ACSR, ACSS, AAC, Copper, Steel Strand)
292
www.kleintools.com > 800-553-4676
2. AWG or MCM (diameter) of wire or cable 3. Maximum safe load required
See Wire Pulling Grips warnings on page 291
Pliers
Wire Pulling Grips
Grip Cleaning, Lubricating and Inspecting
Body
The following guidelines have been established to keep all grips in good working condition.
Drivers and Wrenches
Jaws closed
INSPECTION
Jaws
Side plates
Step 1. Carefully inspect jaw condition, proper alignment of jaws and all parts, 1 To lock open
Conduit Tools and Measurement
and possible distortion caused by exceeding safe-load specifications. Grips should operate smoothly. Spring-loaded grips should lock open with loop handle in "Down" position and should close automatically with loop handle "Up." The Klein Parallel Jaw Grip may be tested by opening and closing the jaws by hand, exercising proper caution. All parts and rivets should be checked for distortion.
Loop handle
CLEANING
Step 3. Spray degreaser on the grip jaws, all joints and moving parts.
Step 4. Use the Klein Grip Cleaning Wire Brush to remove dirt and debris from the grip jaws.
Jobsite Accessories
4
Safety, PPE and Comfort
Step 2. Use the Klein Grip Cleaning Wire Brush Set (Cat. No. 25450) to clean the surfaces of grip jaws.
Tool Kits
3
2
5
Tool Storage
Step 5. Wipe grips dry with a cloth. Repeat necessary cleaning steps until grip is completely clean.
Voice/Data/Video
LUBRICATING 6
Strippers, Cutters, and Crimpers
RECOMMENDED CARE AND MAINTENANCE
Step 6. Apply lubricant to all joints and moving parts. Do NOT lubricate gripping surfaces of jaws.
Test and Measurement Power Tools and Accessories
Note: Conductors may have a die-grease coating which can deposit on grip jaws. New conductors should be wiped clean before grip application. Grip jaws should be wiped clean of all grease before use.
Never repair any grip. Grips that are bent, misaligned, or otherwise distorted should be discarded and replaced. If there is ever a question about the safe condition of any grip, please contact Klein Tools Customer Relations directly at 844-395-3235 or email
[email protected].
www.kleintools.com > 800-553-4676
293
Lifting, Pulling, and Structural
See Wire Pulling Grips warnings on page 291
Pliers Strippers, Cutters, and Crimpers
Wire Pulling Grips
ACSR (Aluminum Conductor Steel Reinforced) MAXIMUM SAFE LOAD
For Cable Diameter
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
4 AWG - 636 MCM .250" - .953" (6.35 mm - 24.21 mm) AWG or MCM Cable Size 4 4 2
Diameter inches No. of Alum. & (mm) Steel Strands .250" (6.35 mm) 6x1 .257" (6.53 mm) 7x1 .316" (8.03 mm) 6x1
Code Word Swan Swanate Sparrow
2
.325" (8.26 mm)
7x1
Sparate
I
.354" (9.02 mm)
6x1
Robin
1/0
.398" (10.11 mm)
6x1
Raven
2/0 3/0 4/0
.447" (11.35 mm) .502" (12.75 mm) .563" (14.30 mm)
6x1 6x1 6x1
Quail Pigeon Penguin
266.8 MCM
.609" (15.47 mm)
18 x 1
Waxwing
266.8 MCM
.642" (16.31 mm)
26 x 7
Partridge
300 MCM
.680" (17.27 mm)
26 x 7
Ostrich
336.4 MCM
.684" (17.37 mm)
18 x 1
Merlin
336.4 MCM
.720" (18.31 mm)
26 x 7
Linnet
336.4 MCM
.741" (18.82 mm)
30 x 7
Oriole
397.5 MCM
.743" (18.87 mm)
18 x 1
Chickadee
397.5 MCM
.772" (19.61 mm)
24 x 7
Brant
397.5 MCM
.783" (19.89 mm)
26 x 7
Ibis
397.5 MCM
.806" (20.47 mm)
30 x 7
Lark
477 MCM
.814" (20.68 mm)
18 x 1
Pelican
477 MCM
.846" (21.49 mm)
24 x 7
Flicker
477 MCM
.858" (21.79 mm)
26 x7
Hawk
477 MCM
.883" (22.43 mm)
30 x 7
Hen
556.5 MCM
.879" (22.33 mm)
18 x 1
Osprey
556.5 MCM
.914" (23.22 mm)
24 x 7
Parakeet
556.5 MCM
.927" (23.55 mm)
26 x 7
Dove
556.5 MCM
.953" (24.21 mm)
30 x 7
Eagle
605 MCM
.953" (24.21 mm)
24 x7
Peacock
636 MCM
.940" (23.88 mm)
18 x 1
Kingbird
A
B
C
D
4,500 lb
8,000 lb
15,000 lb
20,000 lb
(2,041 kg)
(3,629 kg)
(6,803 kg)
(9,072 kg)
Cat. No. 1656-20, 1656-20H & S1656-20H 1656-20, 1656-20H & S1656-20H 1656-20, 1656-20H, S1656-20H, 1656-30, 1656-30H & S1656-30H 1656-20, 1656-20H, S1656-20H, 1656-30, 1656-30H & S1656-30H 1656-20, 1656-20H, S1656-20H, 1656-30, 1656-30H & S1656-30H 1656-20, 1656-20H, S1656-20H, 1656-30, 1656-30H & S1656-30H 1656-30, 1656-30H & S1656-30H 1656-30, 1656-30H & S1656-30H
"S" is for spring. "H" is for hot latch. *Special order only. Please allow 30 days for delivery. Please be aware, 1628-series grips are made-to-order item and are non-cancelable / non-returnable (NCNR).
294
www.kleintools.com > 800-553-4676
Cat. No.
1656-40, 1656-40H & S1656-40H 1656-40, 1656-40H & S1656-40H 1656-40, 1656-40H & S1656-40H 1656-40, 1656-40H & S1656-40H 1656-40, 1656-40H & S1656-40H 1656-40, 1656-40H & S1656-40H 1656-50, 1656-50H & S1656-50H 1656-50, 1656-50H & S1656-50H 1656-50, 1656-50H & S1656-50H 1656-50, 1656-50H & S1656-50H 1656-50, 1656-50H & S1656-50H 1656-50, 1656-50H & S1656-50H 1656-50, 1656-50H & S1656-50H 1656-50, 1656-50H & S1656-50H 1656-60, 1656-60H & S1656-60H 1656-60, 1656-60H & S1656-60H 1656-60, 1656-60H and S1656-60H 1656-60, 1656-60H & S1656-60H 1656-60, 1656-60H & S1656-60H 1656-60, 1656-60H & S1656-60H 1656-60, 1656-60H & S1656-60H
Cat. No.
Cat. No.
1628-16PG* 1628-16PH* 1628-16PI* 1628-16PJ* 1628-16PK* 1628-16PK* 1628-16PK* 1628-16PL* 1628-16PL* 1628-16PL* 1628-16PM* 1628-16PM* 1628-16PM* 1628-16PM* 1628-16PN*
1628-30N*
1628-16PN*
1628-30N*
1628-16PN*
1628-30N*
1628-16PN*
1628-30N* 1628-30O* 1628-30O* 1628-30O* 1628-30O* 1628-30O* For grip details See pages 291-293
See Wire Pulling Grips warnings on page 291
Pliers
Wire Pulling Grips
Strippers, Cutters, and Crimpers
ACSR (Aluminum Conductor Steel Reinforced) MAXIMUM SAFE LOAD
For Cable Diameter
605 - 2515 MCM
1628-40U* 1628-40U* 1628-40U* 1628-40W* 1628-40W* 1628-40X* 1628-40W* 1628-40X* 1628-40X* 1628-40X* 1628-40Y* 1628-40Y* 1628-40Z* 1628-40Z* 1628-40A*
Cat. No. 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50R* 1628-50R* 1628-50P* 1628-50P* 1628-50P* 1628-50R* 1628-50S* 1628-50R* 1628-50R* 1628-50S* 1628-50S* 1628-50S* 1628-50S* 1628-50S* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50U* 1628-50U* 1628-50U* 1628-50W* 1628-50W* 1628-50X* 1628-50W* 1628-50X* 1628-50X* 1628-50X* 1628-50Y* 1628-50Y* 1628-50Z* 1628-50Z* 1628-50A* 1628-50C* 1628-50D* 1628-50D* 1628-50E* 1628-50F* For grip details See pages 291-293
295
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
See Wire Pulling Grips warnings on page 291
Cat. No.
Test and Measurement
*Special order only. Please allow 30 days for delivery. These are not returnable.
Cat. No. 1628-30P* 1628-30P* 1628-30P* 1628-30O* 1628-30P* 1628-30R* 1628-30R* 1628-30P* 1628-30P* 1628-30P* 1628-30R* 1628-30S* 1628-30R* 1628-30R* 1628-30S* 1628-30S* 1628-30S* 1628-30S* 1628-30S* 1628-30T* 1628-30T* 1628-30T* 1628-30T* 1628-30T* 1628-30T* 1628-30U* 1628-30U* 1628-30U*
Voice/Data/Video
Squab Teal Wood Duck Kingbird Rook Egret Scoter Grosbeak Flamingo Gannet Starling Redwing Coot Tern Condor Cuckoo Drake Mallard Ruddy Canary Corncrake Rail Towhee Cardinal Redbird Ortolan Curlew Bluejay Finch Bunting Grackle Skylark Bittern Pheasant Dipper Martin Bobolink Plover Lapwing Falcon Mockingbird Bluebird Kiwi Thrasher Joree
with bolt on jaw (11,340 kg)
Tool Storage
26 x 7 30 x 19 30 x 7 18 x 1 24 x 7 30 x 19 30 x 7 26 x 7 24 x 7 26 x 7 26 x 7 30 x 19 36 x 1 45 x 7 54 x 7 24 x 7 26 x 7 30 x 19 45 x 7 54 x 7 20 x 7 45 x 7 48 x 7 54 x 7 24 x 7 45 x 7 54 x 7 45 x 7 54 x 19 45 x 7 54 x 19 36 x 1 45 x 7 54 x 19 45 x 7 54 x 19 45 x 7 54 x 19 45 x 7 54 x 19 72 x 7 84 x 19 72 x 7 76 x 19 76 x 19
(11,340 kg)
Jobsite Accessories
.966" (24.54 mm) .994" (25.25 mm) .994" (25.25 mm) .940" (23.88 mm) .977" (24.82 mm) 1.019" (25.88 mm) 1.019" (25.88 mm) .991" (25.15 mm) 1.00" (25.40 mm) 1.014" (25.76 mm) 1.051" (26.70 mm) 1.081" (27.46 mm) 1.040" (26.41 mm) 1.063" (27.00 mm) 1.092" (27.76 mm) 1.092" (27.74 mm) 1.107" (28.14 mm) 1.140" (28.96 mm) 1.131" (28.73 mm) 1.162" (29.51 mm) 1.165" (29.59 mm) 1.165" (29.59 mm) 1.175" (29.85 mm) 1.196" (30.38 mm) 1.196" (30.38 mm) 1.212" (30.81 mm) 1.245" (31.65 mm) 1.258" (31.95 mm) 1.292" (32.84 mm) 1.302" (33.07 mm) 1.337" (33.99 mm) 1.317" (33.45 mm) 1.345" (34.16 mm) 1.381" (35.10 mm) 1.386" (35.20 mm) 1.424" (36.17 mm) 1.427" (36.25 mm) 1.465" (37.21 mm) 1.504" (38.15 mm) 1.544" (39.24 mm) 1.681" (42.70 mm) 1.762" (44.75 mm) 1.735" (44.12 mm) 1.802" (45.77 mm) 1.88" (47.75 mm)
Code Word
(9,072 kg)
Safety, PPE and Comfort
605 MCM 605 MCM 605 MCM 636 MCM 636 MCM 636 MCM 636 MCM 636 MCM 666.6 MCM 666.6 MCM 715.5 MCM 715.5 MCM 795 MCM 795 MCM 795 MCM 795.0 MCM 795 MCM 795 MCM 900 MCM 900 MCM 954 MCM 954 MCM 954 MCM 954 MCM 954 MCM 1033.5 MCM 1033.5 MCM 1113 MCM 1113 MCM 1192.5 MCM 1192.5 MCM 1272 MCM 1272 MCM 1272 MCM 1351.5 MCM 1351.5 MCM 1431 MCM 1431 MCM 1590 MCM 1590 MCM 2034.5 MCM 2156 MCM 2167 MCM 2312 MCM 2515 MCM
No. of Alum. & Steel Strands
25,000 lb
Tool Kits
Diameter inches (mm)
F
25,000 lb
Conduit Tools and Measurement
MCM Cable Size
E
20,000 lb
Drivers and Wrenches
D
.966" - 1.88" (24.54 mm - 47.75 mm)
Pliers Strippers, Cutters, and Crimpers
Wire Pulling Grips
ACSS (Aluminum Conductor Steel Supported) For Cable Diameter
MAXIMUM SAFE LOAD
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
605 - 2515 MCM
F
.966" - 1.88" (24.54 mm - 47.75 mm)
25,000 lb (11,340 kg) with bolt on jaw
MCM Cable Size
Diameter inches (mm)
605 MCM 605 MCM 605 MCM 636 MCM 636 MCM 636 MCM 636 MCM 666.6 MCM 666.6 MCM 715.5 MCM 715.5 MCM 795 MCM 795 MCM 795 MCM 795 MCM 795 MCM 900 MCM 900 MCM 954 MCM 954 MCM 954 MCM 954 MCM 954 MCM 954 MCM 1033.5 MCM 1033.5 MCM 1113 MCM 1113 MCM 1192.5 MCM 1192.5 MCM 1272 MCM 1272 MCM 1351.5 MCM 1351.5 MCM 1431 MCM 1431 MCM 1590 MCM 1590 MCM 2034.5 MCM 2167 MCM 2156 MCM 2312 MCM 2515 MCM
.966" (24.54 mm) .994" (25.25 mm) .994" (25.25 mm) .977" (24.82 mm) .991" (25.15 mm) 1.019" (25.88 mm) 1.019" (25.88 mm) 1.00" (25.40 mm) 1.014" (25.76 mm) 1.081" (27.46 mm) 1.051" (26.70 mm) 1.063" (27.00 mm) 1.092" (27.74 mm) 1.092" (27.76 mm) 1.139" (28.93 mm) 1.107" (28.14 mm) 1.131" (28.73 mm) 1.162" (29.51 mm) 1.165" (29.59 mm) 1.165" (29.59 mm) 1.175" (29.85 mm) 1.196" (30.38 mm) 1.196" (30.38 mm) 1.248" (31.70 mm) 1.212" (30.81 mm) 1.245" (31.65 mm) 1.258" (31.95 mm) 1.292" (32.84 mm) 1.302" (33.07 mm) 1.337" (33.99 mm) 1.345" (34.16 mm) 1.381" (35.10 mm) 1.386" (35.20 mm) 1.424" (36.17 mm) 1.427" (36.25 mm) 1.465" (37.21 mm) 1.504" (38.15 mm) 1.544" (39.24 mm) 1.681" (42.70 mm) 1.735" (44.12 mm) 1.762" (44.75 mm) 1.802" (45.77 mm) 1.88" (47.75 mm)
Special order only. Please allow 30 days for delivery. These are not returnable.
296
www.kleintools.com > 800-553-4676
No. of Alum. & Steel Strands 26 x 7 30 x 7 30 x 19 24 x 7 26 x 7 30 x 19 30 x 7 24 x 7 26 x 7 30 x 19 26 x 7 45 x 7 24 x 7 54 x 7 30 x 19 26 x 7 45 x 7 54 x 7 20 x 7 45 x 7 48 x 7 54 x 7 24 x 7 30 x 19 45 x 7 54 x 7 45 x 7 54 x 19 45 x 7 54 x 19 45 x 7 54 x 19 45 x 7 54 x 19 45 x 7 54 x 19 45 x 7 54 x 19 72 x 7 72 x 7 84 x 19 76 x 19 76 x 19
Code Word
Cat. No.
Squab/ACSS Wood Duck/ACSS Teal/ACSS Rook/ACSS Grosbeak/ACSS Egret/ACSS Scoter/ACSS Flamingo/ACSS Gannet/ACSS Redwing/ACSS Starling/ACSS Tern/ACSS Cuckoo/ACSS Condor/ACSS Mallard/ACSS Drake/ACSS Ruddy/ACSS Canary/ACSS Corncrake/ACSS Rail/ACSS Towhee/ACSS Cardinal/ACSS Redbird/ACSS Canvasback/ACSS Ortolan/ACSS Curlew/ACSS Bluejay/ACSS Finch/ACSS Bunting/ACSS Grackle/ACSS Bittern/ACSS Pheasant/ACSS Dipper/ACSS Martin/ACSS Bobolink/ACSS Plover/ACSS Lapwing/ACSS Falcon/ACSS Mockingbird/ACSS Kiwi/ACSS Bluebird/ACSS Thrasher/ACSS Joree/ACSS
1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50R* 1628-50R* 1628-50P* 1628-50P* 1628-50S* 1628-50R* 1628-50R* 1628-50S* 1628-50S* 1628-50S* 1628-50S* 1628-50S* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50U* 1628-50U* 1628-50U* 1628-50U* 1628-50W* 1628-50W* 1628-50X* 1628-50X* 1628-50X* 1628-50X* 1628-50Y* 1628-50Y* 1628-50Z* 1628-50Z* 1628-50A* 1628-50C* 1628-50D* 1628-50D* 1628-50E* 1628-50F* For grip details See pages 291-293
See Wire Pulling Grips warnings on page 291
Pliers
Wire Pulling Grips
For Cable Diameter
MAXIMUM SAFE LOAD
795 - 2627.3 MCM
F
.960" - 1.762" (24.38 mm - 44.75 mm)
25,000 lb (11,340 kg)
Drivers and Wrenches
with bolt on jaw
Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories
For grip details see pages 291-293
www.kleintools.com > 800-553-4676
297
Lifting, Pulling, and Structural
See Wire Pulling Grips warnings on page 291
Cat. No 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50R* 1628-50R* 1628-50R* 1628-50S* 1628-50R* 1628-50S* 1628-50S* 1628-50S* 1628-50S* 1628-50S* 1628-50S* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50T* 1628-50U* 1628-50U* 1628-50U* 1628-50T* 1628-50T* 1628-50U* 1628-50U* 1628-50W* 1628-50W* 1628-50U* 1628-50W* 1628-50U* 1628-50W* 1628-50X* 1628-50X* 1628-50W* 1628-50W* 1628-50X* 1628-50X* 1628-50X* 1628-50X* 1628-50Y* 1628-50X* 1628-50Y* 1628-50Z* 1628-50Y* 1628-50Y* 1628-50Z* 1628-50A* 1628-50D*
Jobsite Accessories
Special order only. Application must be confirmed prior to ordering. Please allow 30 days for delivery
Code Word Wabash/ACSS/TW Maumee/ACSS/TW Tern/ACSS/TW Puffin/ACSS/TW Condor/ACSS/TW Drake/ACSS/TW Fraser/ACSS/TW Phoenix/ACSS/TW Rail/ACSS/TW Cardinal/ACSS/TW Kettle/ACSS/TW Suwannee/ACSS/TW Columbia/ACSS/TW Snowbird/ACSS/TW Ortolan/ACSS/TW Curlew/ACSS/TW Avocet/ACSS/TW Finch/ACSS/TW Bluejay/ACSS/TW Genessee/ACSS/TW Hudson/ACSS/TW Cheyenne/ACSS/TW Oxbird/ACSS/TW Bunting/ACSS/TW Grackle/ACSS/TW Yukon/ASCSS/TW Nelson/ACSS/TW Scissortail/ACSS/TW Catawba/ACSS/TW Pheasant/ACSS/TW Bittern/ACSS/TW Thames/ACSS/TW Martin/ACSS/TW Dipper/ACSS/TW Mackenzie/ACSS/TW Truckee/ACSS/TW Bobolink/ACSS/TW Plover/ACSS/TW Merrimack/ACSS/TW Miramichi/ACSS/TW St. Croix/ACSS/TW Rio Grande/ACSS/TW Potomac/ACSS/TW Platte/ACSS/TW Lapwing/ACSS/TW Falcon/ACSS/TW Schuylkill/ACSS/TW Pecos/ACSS/TW James/ACSS/TW Pee Dee/ACSS/TW Chukar/ACSS/TW Athabaska/ASCC/TW Cumberland/ACSS/TW Santee/ACSS/TW
Safety, PPE and Comfort
No. of Alum. & Steel Strands 20 x 7 20 x 7 17 x 7 18 x 7 20 x 7 20 x 7 35 x 7 30 x 7 32 x 7 20 x 7 32 x 7 22 x 7 21 x 7 30 x 7 32 x 7 22 x 7 30 x 7 38 x 19 33 x 7 34 x 7 24 x 7 30 x 7 30 x 7 34 x 7 38 x 19 38 x 19 35 x 7 30 x 7 30 x 7 39 x 19 38 x 7 39 x 19 42 x 19 35 x 7 36 x 7 30 x 7 36 x 7 44 x 19 39 x 19 36 x 7 33 x 7 38 x 19 36 x 7 33 x 7 36 x 7 42 x 19 36 x 7 39 x 19 34 x 19 38 x 7 38 x 19 44 x 7 42 x 19 64 x 19
Tool Kits
Diameter inches (mm) .990" (25.15 mm) .977" (24.82 mm) .960" (24.38 mm) .980" (24.89 mm) .993" (25.22 mm) 1.010" (25.65 mm) 1.077" (27.36 mm) 1.044" (26.52 mm) 1.061" (26.94 mm) 1.080" (27.43 mm) 1.060" (26.92 mm) 1.110" (28.19 mm) 1.092" (27.73 mm) 1.089" (27.66 mm) 1.102" (27.99 mm) 1.132" (28.75 mm) 1.129" (28.68 mm) 1.185" (30.10 mm) 1.143" (29.03 mm) 1.165" (29.59 mm) 1.196" (30.38 mm) 1.155" (29.34 mm) 1.170" (29.72 mm) 1.181" (29.99 mm) 1.225" (31.12 mm) 1.245" (31.62 mm) 1.213" (30.81 mm) 1.203" (30.56 mm) 1.203" (30.56 mm) 1.264" (32.11 mm) 1.220" (30.99 mm) 1.290" (32.77 mm) 1.300" (33.02 mm) 1.256" (31.90 mm) 1.259" (31.98 mm) 1.248" (31.70 mm) 1.291" (32.79 mm) 1.337" (33.96 mm) 1.340" (34.04 mm) 1.302" (33.07 mm) 1.292" (32.82 mm) 1.380" (35.05 mm) 1.350" (34.29 mm) 1.334" (33.88 mm) 1.358" (34.49 mm) 1.410" (35.81 mm) 1.386" (35.20 mm) 1.420" (36.07 mm) 1.470" (37.34 mm) 1.427" (36.25 mm) 1.445" (36.70 mm) 1.504" (38.20 mm) 1.550" (39.37 mm) 1.761" (44.73 mm)
Conduit Tools and Measurement
MCM Cable Size 762.8 MCM 768.2 MCM 795 MCM 795 MCM 795 MCM 795 MCM 946.7 MCM 954.0 MCM 954.0 MCM 954.0 MCM 957.2 MCM 959.6 MCM 966.2 MCM 1033.5 MCM 1033.5 MCM 1033.5 MCM 1113.0 MCM 1113.0 MCM 1113.0 MCM 1158 MCM 1158.4 MCM 1168.1 MCM 1192.5 MCM 1192.5 MCM 1192.5 MCM 1233.6 MCM 1257.1 MCM 1272 MCM 1272 MCM 1272 MCM 1272 MCM 1334.6 MCM 1351.5 MCM 1351.5 MCM 1359.7 MCM 1372.5 MCM 1431 MCM 1431 MCM 1433.6 MCM 1455.3 MCM 1467.8 MCM 1533.3 MCM 1557.4 MCM 1569 MCM 1590 MCM 1590 MCM 1657.4 MCM 1622 MCM 1730.6 MCM 1758.6 MCM 1780 MCM 1949.6 MCM 1926.9 MCM 2627.3 MCM
Strippers, Cutters, and Crimpers
ACSS/TW (Aluminum Conductor Steel Supported/Trapezoidal Wire)
Pliers Strippers, Cutters, and Crimpers
Wire Pulling Grips
AAC (All Aluminum Conductor) MAXIMUM SAFE LOAD
For Cable Diameter
A
B
C
D
4,500 lb
8,000 lb
15,000 lb
20,000 lb
(2,041 kg)
(3,629 kg)
(6,803 kg)
(9,072 kg)
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
4 AWG - 650 MCM .231" - .928" (5.87 mm - 23.57 mm) AWG or MCM Cable Size
Diameter inches (mm)
No. of Alum. Strands
Code Word
4
.231" (5.87 mm)
7
Rose
2
.292" (7.42 mm)
7
Iris
1
.328" (8.33 mm)
7
Pansy
1/0
.369" (9.36 mm)
7
Poppy
2/0
.414" (10.51 mm)
7
Aster
3/0
.465" (11.81 mm)
7
Phlox
4/0
.522" (13.25 mm)
7
Oxlip
250 MCM
.567" (14.40 mm)
7
250 MCM
.574" (14.58 mm)
266.8 MCM
Cat. No.
Cat. No.
Sneezewort
1656-40, 1656-40H and S1656-40H
1628-16PI*
19
Valerian
1628-16PI*
.586" (14.88 mm)
7
Daisy
266.8 MCM
.593" (15.05 mm)
19
Laurel
300 MCM
.628" (15.95 mm)
19
Peony
336.4 MCM
.665" (16.90 mm)
19
Tulip
350 MCM
.678" (17.22 mm)
19
Daffodil
397.5 MCM
.724" (18.38 mm)
19
Canna
450 MCM
.769" (19.53 mm)
19
Goldentuft
1656-40, 1656-40H and S1656-40H 1656-40, 1656-40H and S1656-40H 1656-40, 1656-40H and S1656-40H 1656-40, 1656-40H and S1656-40H 1656-40, 1656-40H and S1656-40H 1656-40, 1656-40H and S1656-40H 1656-40, 1656-40H and S1656-40H 1656-50, 1656-50H and S1656-50H
477 MCM
.792" (20.12 mm)
19
Cosmos
1628-16PM*
477 MCM
.794" (20.18 mm)
37
Syringa
1628-16PM*
500 MCM
.811" (20.60 mm)
19
Zinnia
1628-16PM*
500 MCM
.813" (20.65 mm)
37
Hyacinth
1628-16PM*
556.5 MCM
.856" (21.73 mm)
19
Dahlia
1628-16PN*
1628-30N*
556.5 MCM
.858" (21.80 mm)
37
Mistletoe
1628-16PN*
1628-30N*
600 MCM
.891" (22.63 mm)
37
Meadowsweet
1628-30O*
636 MCM
.918" (23.31 mm)
37
Orchid
1628-30O*
650 MCM
.928" (23.57 mm)
37
Heuchera
1628-30O*
"S" is for spring. "H" is for hot latch. *Special order only. Please allow 30 days for delivery. These are not returnable.
298
www.kleintools.com > 800-553-4676
Cat. No.
Cat. No.
1656-20, 1656-20H and S1656-20H 1656-20, 1656-20H and S1656-20H 1656-20, 1656-20H, S1656-20H, 1656-30, 1656-30H and S1656-30H 1656-20, 1656-20H, S1656-20H, 1656-30, 1656-30H and S1656-30H 1656-30, 1656-30H and S1656-30H 1656-30, 1656-30H and S1656-30H 1656-30, 1656-30H and S1656-30H
1628-16PJ* 1628-16PJ* 1628-16PJ* 1628-16PK* 1628-16PK* 1628-16PL* 1628-16PM*
For grip details See pages 291-293
See Wire Pulling Grips warnings on page 291
Pliers
Wire Pulling Grips
Strippers, Cutters, and Crimpers
AAC (All Aluminum Conductor) For Cable Diameter
MAXIMUM SAFE LOAD
700 - 2500 MCM
25,000 lb
25,000 lb.
(9,072 kg)
(11,340 kg)
(11,340 kg) with bolt on jaw
Cat. No. 1628-30P* 1628-30P* 1628-30P* 1628-30P* 1628-30P* 1628-30P* 1628-30R* 1628-30R* 1628-30R* 1628-30R* 1628-30R* 1628-30R* 1628-30S* 1628-30S* 1628-30S* 1628-30T* 1628-30T* 1628-30T* 1628-30T* 1628-30U* 1628-30U*
Cat. No.
1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50P* 1628-50R* 1628-50R* 1628-50R* 1628-50R* 1628-50R* 1628-50R* 1628-50S* 1628-50S* 1628-50S* 1628-50T 1628-50T* 1628-50T* 1628-50T* 1628-50U* 1628-50U* 1628-50W* 1628-50X* 1628-50X* 1628-50Y* 1628-50Z* 1628-50A* 1628-50D* 1628-50E*
Tool Storage
1628-40U* 1628-40U* 1628-40W* 1628-40X* 1628-40X* 1628-40Y* 1628-40Z* 1628-40A*
Cat. No.
Jobsite Accessories
Code Word Verbena Flag Violet Nasturtium Petunia Cattail Arbutus Lilac Fuchsia Heliotrope Anemone Crocus Cockscomb Magnolia Goldenrod Camellia Hawkweed Bluebell Larkspur Marigold Hawthorn Narcissus Columbine Carnation Gladiolus Coreopsis Jessamine Sagebrush Lupine
20,000 lb
Safety, PPE and Comfort
No. of Alum. & Steel Strands 37 61 37 61 37 61 37 61 37 61 37 61 37 37 61 61 37 37 61 61 61 61 61 61 61 61 61 91 91
F
Tool Kits
Diameter inches (mm) .963" (24.46 mm) .964" (24.49 mm) .974" (24.73 mm) .975" (24.76 mm) .997" (25.32 mm) .998" (25.35 mm) 1.026" (26.07 mm) 1.028" (26.11 mm) 1.029" (26.14 mm) 1.031" (26.19 mm) 1.076" (27.37 mm) 1.077" (27.36 mm) 1.092" (27.74 mm) 1.124" (28.55 mm) 1.126" (28.60 mm) 1.152" (29.26 mm) 1.152" (29.26 mm) 1.170" (29.71 mm) 1.172" (29.76 mm) 1.216" (30.88 mm) 1.258" (31.96 mm) 1.297" (32.94 mm) 1.339" (34.02 mm) 1.379" (35.02 mm) 1.417" (35.98 mm) 1.454" (36.93 mm) 1.524" (38.72 mm) 1.729" (43.92 mm) 1.823" (46.30 mm)
E
Conduit Tools and Measurement
MCM Cable Size 700 MCM 700 MCM 715.5 MCM 715.5 MCM 750 MCM 750 MCM 795 MCM 795 MCM 800 MCM 800 MCM 874.5 MCM 874.5 MCM 900 MCM 954 MCM 954 MCM 1000 MCM 1000 MCM 1033.5 MCM 1033.5 MCM 1113 MCM 1192.5 MCM 1272 MCM 1351.5 MCM 1431 MCM 1510.5 MCM 1590 MCM 1750 MCM 2250 MCM 2500 MCM
D
Drivers and Wrenches
.963" - 1.823" (24.46 mm - 46.30 mm)
Maximum safe stringing tension 12,500 lbs to minimize cable deformation. * Special order. Please allow 30 days for delivery. These are not returnable.
For grip details See pages 291-293
Voice/Data/Video Test and Measurement Power Tools and Accessories
www.kleintools.com > 800-553-4676
299
Lifting, Pulling, and Structural
See Wire Pulling Grips warnings on page 291
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Wire Pulling Grips
Chicago™ Grips 1656 Series smooth inside jaw contour on this • Round, series of grips is ideal for bare ACSR Smooth jawed grips with maximum contact • are less likely to cause cable deformation
Tool Kits
Conduit Tools and Measurement
1656-30
A
Cat. No. 1656-20 1656-20H S1656-20H 1656-30 1656-30H S1656-30H
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
B
Power Tools and Accessories
4,500 lb (2,041 kg) Maximum Safe Load Cable Type Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC
Cable Diameter 0.20" to 0.40" (5.08 to 10.16 mm) 0.20" to 0.40" (5.08 to 10.16 mm) 0.20" to 0.40" (5.08 to 10.16 mm) 0.31" to 0.53" (7.87 to 13.46 mm) 0.31" to 0.53" (7.87 to 13.46 mm) 0.1" to 0.53" (7.87 to 13.46 mm)
1656-40
Hot Latch —
• • — • •
Spring — —
•
— —
•
Locking Handle
• • • • • •
Jaw Type Round Round Round Round Round Round
Jaw Length 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4.75" (12.1 cm) 4.75" (12.1 cm) 4.75" (12.1 cm)
Weight 2.7 lb (1.2 kg) 3.15 lb (1.43 kg) 3.15 lb (1.43 kg) 3.4 lb (1.5 kg) 3.95 lb (1.79 kg) 4 lb (1.81 kg)
Jaw Type Round Round Round Round Round Round Round Round Round
Jaw Length 5.5" (14 cm) 5.5" (14 cm) 5.5" (14 cm) 5.5" (14 cm) 5.5" (14 cm) 5.5" (14 cm) 5.5" (14 cm) 5.5" (14 cm) 5.5" (14 cm)
Weight 7.4 lb (3.4 kg) 8.5 lb (3.92 kg) 8.65 lb (3.92 kg) 7.5 lb (3.4 kg) 8.45 lb (3.83 kg) 8.45 lb (3.83 kg) 7.8 lb (3.5 kg) 8.4 lb (3.81 kg) 8.36 lb (3.79 kg)
8,000 lb (3,629 kg) Maximum Safe Load
Cat. No. 1656-40 1656-40H S1656-40H 1656-50 1656-50H S1656-50H 1656-60 1656-60H S1656-60H
Cable Type Copper, ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC
Cable Diameter 0.53" to 0.74" (13.46 to 18.80 mm) 0.53" to 0.74" (13.46 to 18.80 mm) 0.53" to 0.74" (13.46 to 18.80 mm) 0.74" to 0.86" (18.80 to 21.84 mm) 0.74" to 0.86" (18.80 to 21.84 mm) 0.74" to 0.86" (18.80 to 21.84 mm) 0.86" to 0.96" (21.84 to 24.38 mm) 0.86" to 0.96" (21.84 to 24.38 mm) 0.86" to 0.96" (21.84 to 24.38 mm)
Hot Latch —
• • — • • — • •
Spring — —
•
— —
•
— —
•
Locking Handle
• • — • • — • • —
1628-16P Series jaws are shaped to provide maximum contact with the cable, • Round virtually eliminating cable deformation • Designed for large-diameter ACSR cables grips are special order only; please allow 30 days for delivery; • These special order grips are not returnable
C Cat. No. 162816PE 162816PF 162816PG 162816PH 162816PI 162816PJ 1628-16PK 162816PL 162816PM 162816PN
1628-16P
15,000 lb (6,803 kg) Maximum Safe Load Cable Type Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC Copper, ACSR, AAC
Cable Diameter 0.31" to 0.33" (7.87 to 8.38 mm) 0.33" to 0.39" (8.38 to 9.90 mm) 0.40" to 0.45" (9.93 to 11.50 mm) 0.46" to 0.52" (11.53 to 13.08 mm) 0.52" to 0.58" (13.11 to 14.68 mm) 0.58" to 0.64" (14.71 to 16.25 mm) 0.64" to 0.70" (16.28 to 17.86 mm) 0.71" to 0.76" (17.89 to 19.43 mm) 0.77" to 0.82" (19.46 to 21.03 mm) 0.83" to 0.89" (21.06 to 22.61 mm)
Hot Latch — — — — — — — — — —
Spring — — — — — — — — — —
Locking Handle — — — — — — — — — —
Jaw Type Round Round Round Round Round Round Round Round Round Round
Jaw Length 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm)
Weight 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg) 17.0 lb (7.7 kg)
Lifting, Pulling, and Structural
The "H" suffix does not indicate Hot Latch for this item.
300
www.kleintools.com > 800-553-4676
See Wire Pulling Grips warnings on page 291
Pliers
Wire Pulling Grips
Strippers, Cutters, and Crimpers
1628 Series jaws are shaped to provide • Round maximum contact with the cable, virtually
•
E
Cable Type ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC
Cable Diameter 0.83" to 0.89" (21.06 to 22.61 mm) 0.89" to 0.96" (22.63 to 24.21 mm) 0.95" to 1.02" (24.23 to 25.78 mm) 1.02" to 1.08" (25.81 to 27.38 mm) 1.08" to 1.14" (27.41 to 28.96 mm) 1.14" to 1.20" (28.95 to 30.55 mm) 1.21" to 1.26" (30.7 to 32 mm)
Hot Latch — — — — — — —
Spring — — — — — — —
Locking Handle Jaw Type Round — Round — Round — Round — Round — Round — Round
Jaw Length 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm)
Weight 27.0 lb (12.3 kg) 27.0 lb (12.3 kg) 27.0 lb (12.3 kg) 27.0 lb (12.3 kg) 27.0 lb (12.3 kg) 27.0 lb (12.3 kg) 27.0 lb (12.3 kg)
Hot Latch — — — — — —
Spring — — — — — —
Locking Handle Jaw Type Round — Round — Round — Round — Round — Round
Jaw Length 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm)
Weight 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg)
•
25,000 lb (11,340 kg) Maximum Safe Load Cable Type ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC ACSR, AAC
Cable Diameter 1.20" to 1.26" (30.48 to 32 mm) 1.27" to 1.32" (32.25 to 33.52 mm) 1.33" to 1.39" (33.78 to 35.30 mm) 1.39" to 1.45" (35.30 to 36.83 mm) 1.45" to 1.52" (36.83 to 38.6 mm) 1.52" to 1.58" (38.6 to 40.13 mm)
•
Jobsite Accessories
25,000 lb (11,340 kg) Maximum Safe Load with Bolt-On Jaw Hot Latch — — — — — — — — — — — — — —
Spring — — — — — — — — — — — — — —
Locking Handle Jaw Type Round — Round — Round — Round — Round — Round — Round — Round — Round — Round — Round — Round — Round — Round
•
Jaw Length 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm) 10.75" (27.3 cm)
Weight 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg) 34.0 lb (15.5 kg)
301
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Power Tools and Accessories
See Wire Pulling Grips warnings on page 291
Cable Diameter 0.95" to 1.02" (24.23 to 25.78 mm) 1.02" to 1.08" (25.91 to 27.43 mm) 1.08" to 1.14" (27.41 to 28.96 mm) 1.14" to 1.20" (28.95 to 30.55 mm) 1.20" to 1.27" (30.48 to 32.25 mm) 1.27" to 1.33" (32.25 to 33.78 mm) 1.33" to 1.39" (33.78 to 35.30 mm) 1.39" to 1.45" (35.30 to 36.83 mm) 1.45" to 1.52" (36.83 to 38.6 mm) 1.52" to 1.58" (38.6 to 40.13 mm) 1.64" to 1.70" (41.65 to 43.18 mm) 1.70" to 1.77" (43.18 to 44.95 mm) 1.77" to 1.83" (44.95 to 46.48 mm) 1.83" to 1.89" (46.48 to 48 mm)
Test and Measurement
Cable Type ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC ACSR, ACSS, ACSS-TW, AAC
Voice/Data/Video
Cat. No. 1628-50P 1628-50R 162850S 162850T 162850U 162850W 162850X 162850Y 162850Z 162850A 162850C 162850D 162850E 162850F
1628-50
Tool Storage
1628 Series Removable bolt on floating jaw, secured by a slotted nut • and cotter pin. Jaw provides increased cable coverage Cat. • No. 555 replacement bolt available • NOTE: Jaw must be removed to insert cable grips are special order only; please allow 30 days • These for delivery; special order grips are not returnable
F
Safety, PPE and Comfort
Cat. No. 162840U 162840W 162840X 162840Y 162840Z 162840A
20,000 lb (9,072 kg) Maximum Safe Load
Tool Kits
Cat. No. 162830N 162830O 162830P 162830R 162830S 162830T 162830U
1628-40
Conduit Tools and Measurement
D
1628-30
Drivers and Wrenches
eliminating cable deformation These grips are special order only; please allow 30 days for delivery; special order grips are not returnable
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Wire Pulling Grips
Dual Conductor specifically for VR2 (vibration-resistant) and TransPowr • Designed T-2 dual conductor twisted pair cables upper and lower jaws eliminate scoring or damage to • Machined second conductor grips are special order only; please allow 30 days for delivery; • These special order grips are not returnable ®
®
®
Conduit Tools and Measurement
162840VRU
Cat. No.
Cable Type
Cable Diameter
Hot Latch
Spring
— —
— —
Locking Handle Jaw Type
Jaw Length
Weight
10.75" (27.3 cm) 10.75" (27.3 cm)
34.0 lb (15.5 kg) 27 lb (12.3 kg)
15,000 lb (6,803 kg) Maximum Safe Load
162840VRU 162830VRP
ACSR ACSR
1.20" to 1.27" (30.5 to 32.3 mm) 0.95" to 1.02" (24.13 to 25.91 mm)
— —
Round Round
1613, 1628, 1684, 1686, 1671, 1672 and 1692 Series • Designed for cable sizes from 0.12" to 1" (3.05 mm to 25.4 mm) Double “V” grooves give four-point contact, reducing chance of slipping and providing proper • alignment of wire and cable. Cat. No. 1684-5F is a Single V with file insert. • Features an aggressive jaw profile for extra gripping power (Cat. No. 16845C) • 1671-10 & 1672-10 have a swing latch 1613-40
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
VR2 is a registered trademark of Southwire Company. TransPowr and T-2 are registered trademarks of General Cable Technologies Corporation.
Replacement parts or 1684-5F: Screws (Cat. No. 573) and file (Cat. No. 578)
Cat. No.
Cable Type
Cable Diameter
Hot Latch Spring Locking Handle Jaw Type
Jaw Length
Weight
4,500 lb (2,041 kg) Maximum Safe Load
1613-40 1613-40H S1613-40H
Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand
0.12" to 0.37" (3.05 to 9.40 mm) 0.12" to 0.37" (3.05 to 9.40 mm) 0.12" to 0.37" (3.05 to 9.40 mm)
—
0.16" to 0.55" (4.06 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm)
— —
• •
•
• • •
Double V Double V Double V
4.188" (10.6 cm) 4.188" (10.6 cm) 4.188" (10.6 cm)
2.7 lb (1.2 kg) 3.15 lb (1.43 kg) 3.2 lb (1.4 kg)
• • — • •
• • • • •
Single V with File Insert Double V Double V Double V Double V
5" 5" 5" 5" 5"
(12.7 cm) (12.7 cm) (12.7 cm) (12.7 cm) (12.7 cm)
6.4 lb (2.9 kg) 5.8 lb (2.6 kg) 6.5 lb (2.9 kg) 6.7 lb (3.0 kg) 5.4 lb (2.5 kg)
• • • •
Aggressive Double V, Milled Curved Double V, Milled Curved Double V, Milled Curved
5" 5" 5" 5"
(12.7 cm) (12.7 cm) (12.7 cm) (12.7 cm)
6.0 lb (2.7 kg) 5.6 lb (2.6 kg) 6.3 lb (2.9 kg) 6.45 lb (2.93 kg)
— —
8,000 lb (3,629 kg) Maximum Safe Load
1684-5F 1684-5 1684-5H S1684-5H 1692-5
Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand
• •
—
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
8,000 lb (3,629 kg) Maximum Safe Load – EHS Specific
16845C 1684-74 1684-74H S1684-74H
Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand
0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm)
— —
• •
• • — •
0.20" to 0.40" (5.08 to 10.16 mm) 0.20" to 0.40" (5.08 to 10.16 mm) 0.37" to 0.75" (9.40 to 19.05 mm) 0.37" to 0.75" (9.40 to 19.05 mm)
— — — —
— — — —
— — — —
Double V Double V - Serrated Double V Double V - Serrated
4.375" 4.375" 4.375" 4.375"
0.31" to 0.62" (7.87 to 15.75 mm) 0.50" to 0.75" (12.70 to 19.05 mm) 0.75" to 1.0" (19.05 to 25.40 mm)
— — —
— — —
• • •
Double V Double V Double V
7.25" (18.4 cm) 7.25" (18.4 cm) 7.25" (18.4 cm)
10,000 lb (4,536 kg) Maximum Safe Load
1686-10 1686-20 1671-10 1672-10
Aircraft, Messenger, Guy Strand Aircraft, Messenger, Guy Strand Aircraft, Messenger, Guy Strand Aircraft, Messenger, Guy Strand
(11.1 cm) (11.1 cm) (11.1 cm) (11.1 cm)
4.6 lb (2.1 kg) 4.6 lb (2.1 kg) 4.3 lb (2.0 kg) 4.4 lb (2.0 kg)
15,000 lb (6,803 kg) Maximum Safe Load
1628-16 1628-17 1628-18
302
Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand
> 800-553-4676
13.7 lb (6.2 kg) 14.6 lb (6.6 kg) 14.1 lb (6.4 kg)
See Wire Pulling Grips warnings on page 291
Pliers
Wire Pulling Grips
Strippers, Cutters, and Crimpers
Weatherproof Stranded and Solid Cable — 1611 Series • Round inside jaw contour for weatherproof coated wire • Notches in jaw provide firm grip on insulation
Cable Type
Cable Diameter
Hot Latch
Spring
Locking Handle Jaw Type
0.20" to 0.40" (5.08 to 10.16 mm) 0.31" to 0.53" (7.87 to 13.46 mm)
— —
• •
• •
0.53" to 0.70" (13.46 to 17.78 mm) 0.74" to 0.86" (18.80 to 21.84 mm)
— —
• •
• •
Jaw Length
Weight
1611-20 1611-30
Copper, ACSR, AAC Copper, ACSR, AAC
Notched Notched
4.188" (10.6 cm) 4.75" (12.1 cm)
2.6 lb (1.2 kg) 3.4 lb (1.5 kg)
Notched Notched
5.688" (14.5 cm) 5.688" (14.5 cm)
7.4 lb (3.4 kg) 7.4 lb (3.4 kg)
8,000 lb (3,629 kg) Maximum Safe Load
1611-40 1611-50
Copper, ACSR, AAC Copper, ACSR, AAC
Tool Kits
Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable.
Safety, PPE and Comfort
Bare Wire — 1613 Series for working with solid and stranded bare • Designed wire from 0.08" (2 mm) to 0.20" (5.1 mm) • Lightweight, cost-effective grip • Single “V” groove jaw Cat. Nos. 1613-35 and 1613-35H pull #6 and #8 bare • copper wire without damaging or deforming the cable
Cable Type
Cable Diameter
Hot Latch
Spring
Locking Handle Jaw Type
0.08" to 0.20" (2.03 to 5.08 mm)
—
•
•
0.1285" to 0.162" (3.3 to 4.06 mm) 0.1285" to 0.162" (3.3 to 4.06 mm)
—
• •
• •
Jaw Length
Weight
Single V
3" (7.6 cm)
1.5 lb (0.7 kg)
Single V Single V
4.188" (10.6 cm) 4.188" (10.6 cm)
2.9 lb (1.3 kg) 2.8 lb (1.3 kg)
Jobsite Accessories
1613-30
Cat. No.
Conduit Tools and Measurement
Cat. No.
4,500 lb (2,041 kg) Maximum Safe Load
Drivers and Wrenches
1611-30
1,500 lb (680 kg) Maximum Safe Load
Copper, Steel, ACSR
4,500 lb (2,041 kg) Maximum Safe Load
1613-35 161335H
Copper, ACSR Copper, ACSR
•
Voice/Data/Video
1659-30
Cable Type
Cable Diameter
Spring
Locking Handle Jaw Type
0.20" to 0.42" (5.08 to 10.67 mm) 0.31" to 0.50" (7.87 to 12.70 mm)
— —
• •
• •
0.49" to 0.79" (12.45 to 20.07 mm) 0.79" to 1.01" (20.07 to 25.65 mm)
— —
• •
• •
Jaw Length
Weight
1659-20 1659-30
PVC-Covered Cable PVC-Covered Cable
Round - Serpentine Round - Serpentine
4.188" (10.6 cm) 4.75" (12.1 cm)
2.6 lb (1.2 kg) 3.3 lb (1.5 kg)
Round - Serpentine Round - Serpentine
5.688" (14.5 cm) 5.688" (14.5 cm)
7.7 lb (3.5 kg) 7.3 lb (3.3 kg)
8,000 lb (3,629 kg) Maximum Safe Load
1659-40 1659-50
PVC-Covered Cable PVC-Covered Cable
www.kleintools.com > 800-553-4676
303
Lifting, Pulling, and Structural
See Wire Pulling Grips warnings on page 291
Power Tools and Accessories
Hot Latch
4,500 lb (2,041 kg) Maximum Safe Load
Test and Measurement
PVC-Covered Cable — 1659 Series Specially machined serpentine jaws allow insulated • conductor to be inserted through jaws • Eliminates necessity of stripping insulation from conductor • Round inside-jaw contour
Cat. No.
Tool Storage
1613-30
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Wire Pulling Grips Bell System B, L, and H — 1628, 1659, 1684 and 1692 Series are equipped with chain, toggle and shackle - keeps the • All grip from falling off of cable 1659-5AT is similar to Bell-System type “B” Strand Puller. • Designed to pull 1/4" (6.35 mm) figure-8 telephone cable
1659-5AT *1692-5AT (larger clamping force than 1684-5AT)
Cat. No. 1659-5AT
Safety, PPE and Comfort Jobsite Accessories
Cable Diameter
Hot Latch
Spring
Locking Handle
Jaw Type
Jaw Length
Weight
Steel Strand
0.20" to 0.37" (5.08 to 9.4 mm)
—
•
•
Round - Serpentine
5" (12.7 cm)
6.7 lb (3.03 kg)
0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm) 0.218" to 0.55" (5.54 to 13.97 mm)
— — —
• • •
• • •
Double V Aggressive Double V
5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm)
6.9 lb (3.12 kg) 6.9 lb (3.12 kg) 6.6 lb (2.99 kg)
0.31" to 0.62" (7.87 to 15.75 mm)
—
•
•
Double V
7.25" (18.4 cm)
15.8 lb (7.17 kg)
8,000 lb (3,629 kg) Maximum Safe Load
1684-5AT 16845CAT 1692-5AT
Aircraft, EHS, Messenger, Guy Strand Aircraft, EHS, Messenger, Guy Strand Steel Strand
15,000 lb (6,803 kg) Maximum Safe Load
1628-16AT
Tool Storage
Cable Type
5,000 lb (2,268 kg) Maximum Safe Load
Aircraft, EHS, Messenger, Guy Strand
Steel Strand – Haven's™ Grips 1604 Series for use when light, compact grip is desired • Designed and where cable deformation is not a factor pressure of the knurled jaw is • Gripping applied to 1/4" (6.35 mm) cable area • Latch on Cat. No. 1604-20L helps hold cable in the jaw • 1604-20L features a swing latch Cat. No. Cable Type
1604-20
Cable Diameter
Hot Spring Locking Jaw Latch Handle Type
Weight
2,500 lb (1,134 kg) Maximum Safe Load
1604-10
Messenger and Guy Strand
0.06" to 0.25" (1.52 to 6.35 mm)
—
—
—
Aggressive 15.2 oz (431 g)
— —
— —
— —
Aggressive 2.2 lb (1.0 kg) Aggressive 2.60 lb (1.18 kg)
1604-20L
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
5,000 lb (2,268 kg) Maximum Safe Load
1604-20 Messenger and Guy Strand 1604-20L Messenger and Guy Strand
0.125" to 0.5" (3.18 to 12.70 mm) 0.125" to 0.5" (3.18 to 12.70 mm)
1625 Series for use when light, compact grip is desired • Designed and where cable deformation is not a factor • Gripping pressure of the knurled jaw is applied to 1/4" (6.35 mm) cable area • All 1625 series have a swing latch to help hold cable in the jaw Cat. No.
Cable Type
Cable Diameter
Hot Latch
1625-20-114
Spring Locking Jaw Type Handle
Weight
2,000 lb (907 kg) Maximum Safe Load
162520-114
Wire Rope
0.75" to 1.25" (19.05 to 31.75 mm)
—
—
—
Aggressive
3.7 lb (1.7 kg)
— — —
— — —
— — —
Aggressive Aggressive Aggressive
3.5 lb (1.6 kg) 3.4 lb (1.5 kg) 3.4 lb (1.5 kg)
8,000 lb (3,629 kg) Maximum Safe Load
1625-20 162520-7/8 162520-1
304
Wire Rope Wire Rope Wire Rope
0.28" to 0.75" (7.11 to 19.05 mm) 0.38" to 0.88" (9.65 to 22.35 mm) 0.50" to 1.00" (12.70 to 25.40 mm)
www.kleintools.com > 800-553-4676
See Wire Pulling Grips warnings on page 291
Pliers
Wire Pulling Grips
Strippers, Cutters, and Crimpers
Parallel Jaw Grips
Cable Type Bare Copper, Aluminum, & ACSR
Cable Diameter 0.162 to 0.883" (4.11 to 22.42 mm)
Hot Latch —
Spring
• •
•
Locking Handle —
Jaw Type Round Round
•
HDPE-Coated Cable • Securely pulls HDPE-coated cable commonly known as "tree wire" • Innovative high-traction surface grips the cable without damaging the outer jacket • Tough carbide grit technology withstands even the harshest jobsite conditions
Jaw Length 3.31" (8.4 cm) 3.31" (8.4 cm)
Weight 2.9 lb (1.3 kg) 3.2 lb (1.5 kg)
1716-60
Cable Diameter
Hot Latch
Spring
Locking Handle
Jaw Type
Jaw Length
Weight
1716-70 1716-71
HDPE-Coated
0.625" to 1.362" (15.9 to 34.6 mm)
• •
• •
—
•
Round Round
4.5" (11.4 cm) 4.5" (11.4 cm)
5.10 lb (2.31 kg) 5.10 lb (2.31 kg)
0.70" to 1.30" (17.78 to 33.02 mm)
—
•
—
Round
5.125" (13 cm)
8.1 lb (3.7 kg)
Safety, PPE and Comfort
Cable Type
4,000 lbs. (1,814 kg) Maximum Safe Load
Tool Kits
1716-70
Cat. No.
Conduit Tools and Measurement
Cat. No. 16477 16477-20
16477
Drivers and Wrenches
Wide Range Distribution Grip • 20% lighter with one handed grip action • Holds a wide range of Bare Copper, Aluminum and ACSR cable opening in the handle accommodates a wide variety of hooks on hoists, • Large winches and tackle blocks • Patent pending design
12,000 lbs. (5,443 kg) Maximum Safe Load
1716-60
HDPE-Coated
Jobsite Accessories Tool Storage
KT Series • cable sizes reducing the number of grips needed Round jaw provides maximum contact • with the cable minimizing deformation Large in handle accommodates a wide • varietyopening of hooks on hoists, winches, and tackle blocks latch closes automatically to guard against • Hot grip accidentally disengaging from wire closes grip on cable helping to • Spring maintain initial position Locking handle keeps jaw open while • grip is placed on cable with a hot stick
KT4800
KT45005C
Cat. No.
Cable Type
Cable Diameter
Voice/Data/Video
KT4602
Spring
Locking Handle
0.18" to 0.60" (4.57 to 15.20 mm) 0.18" to 0.60" (4.57 to 15.20 mm) 0.18" to 0.60" (4.57 to 15.20 mm) 0.18" to 0.60" (4.57 to 15.20 mm)
— —
• • • •
— —
0.30" to 0.80" (7.62 to 20.3 mm) 0.30" to 0.80" (7.62 to 20.3 mm) 0.16" to 0.90" (7.62 to 20.3 mm)
—
• • •
—
0.70" to 1.25" (17.78 to 31.75 mm) 0.70" to 1.25" (17.78 to 31.75 mm) 0.70" to 1.25" (17.78 to 31.75 mm)
—
• • •
—
Jaw Type
Jaw Length
Weight
KT4500 KT45005C KT4501 KT4502
ACSR Guy Strand, EHS, Coated ACSR ACSR
Round - Serrated Round - Serrated Round - Serrated Round - Serrated
4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
3.8 lb (1.7 kg) 3.8 lb (1.7 kg) 3.8 lb (1.7 kg) 3.8 lb (1.7 kg)
• •
•
—
Round - Serrated Round - Serrated Round - Serrated
5" (12.7 cm) 5" (12.7 cm) 5" (12.7 cm)
7.0 lb (3.2 kg) 7.0 lb (3.2 kg) 7.0 lb (3.2 kg)
Round - Serrated Round - Serrated Round - Serrated
5.125" (13 cm) 5.125" (13 cm) 5.125" (13 cm)
9.0 lb (4.1 kg) 9.0 lb (4.1 kg) 9.0 lb (4.1 kg)
Test and Measurement
Hot Latch
5,000 lbs. (2,268 kg) Maximum Safe Load
10,000 lbs. (4,536 kg) Maximum Safe Load
ACSR ACSR ACSR
• •
•
—
12,000 lbs. (5,443 kg) Maximum Safe Load
KT4800 KT4801 KT4802
ACSR ACSR ACSR
•
—
www.kleintools.com > 800-553-4676
305
Lifting, Pulling, and Structural
See Wire Pulling Grips warnings on page 291
• •
Power Tools and Accessories
KT4600 KT4601 KT4602
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
1675 Series grips hold a wider range of ACSR cable • Versatile sizes reducing the number of grips needed • Round jaw provides maximum contact with the cable minimizing deformation opening in handle accommodates a wide • Large variety of hooks on hoists, winches, and tackle blocks latch closes automatically to guard against • Hot grip accidentally disengaging from wire • Locking handle keeps jaw open while grip is placed on cable with a hot stick Cat. No.
Cable Type
Cable Diameter
1675-20
Hot Latch
Spring
Locking Handle
• •
• •
—
Jaw Type
Jaw Length
Weight
Round - Serrated Round - Serrated
5" (12.7 cm) 5" (12.7 cm)
7.8 lb (3.5 kg) 7.8 lb (3.5 kg)
5,000 lbs. (2,268 kg) Maximum Safe Load
1675-20 1675-21
ACSR ACSR
0.16" to 0.90" (4.06 to 22.86 mm) 0.16" to 0.90" (4.06 to 22.86 mm)
•
1685 Series • Lightweight, compact grips pull an exceptionally wide range of cable sizes and types • Designed with a round inside-jaw contour for maximum contact to minimize conductor damage • Lower jaw is serrated to firmly grip insulated cables and conductors • Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Wire Pulling Grips
1685-31
Cat. No.
Cable Type
Cable Diameter
Hot Latch
Spring
Locking Handle
—
• •
— —
Jaw Type
Jaw Length
Weight
Round - Serrated Round - Serrated
2.5" (6.4 cm) 4.5" (11.4 cm)
2.6 lb (1.2 kg) 4.8 lb (2.2 kg)
7,500 lbs. (3,400 kg) Maximum Safe Load
1685-20 1685-31
Messenger, EHS, Coated Messenger, EHS, Guy Strand
0.157" to 0.875" (3.98 to 22.22 mm) 0.625" to 1.250" (15.87 to 31.75 mm)
•
Accessories Grip-Cleaning Brush Set • Set of four wire-bristle brushes designed for cleaning Klein wire and cable-pulling grips • Brushes have stiff wire bristles round and square shapes in both 12" and 14" (30.5 and 35.6 cm) lengths for • Includes efficient cleaning of different jaw configurations • Semi-flexible steel shafts set into comfortable wooden handles provide the necessary
Lifting, Pulling, and Structural
Power Tools and Accessories
reach into grip jaws
25450
1-9/16"
306
1-9/16"
www.kleintools.com > 800-553-4676
3/8"
3/8"
Cat. No. 25450
Weight 1.0 lb (0.5 kg)
See Wire Pulling Grips warnings on page 291
Strippers, Cutters, and Crimpers
Drivers and Wrenches
Conduit Tools and Measurement
Tool Kits
Safety, PPE and Comfort
Jobsite Accessories
Tool Storage
Voice/Data/Video
Test and Measurement
Power Tools and Accessories
Lifting, Pulling, and Structural
WIRE MESH GRIPS
Pliers
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
WIRE MESH GRIPS INTRODUCTION Klein mesh pulling-grips are used for pulling overhead or underground cable, for stringing service or communication lines into buildings, for pulling wire through conduit, and for general underground construction. Klein grips may be used for pulling bare or insulated wires, and wire rope. They install quickly and easily, and are designed to pass readily through ducts, conduit, blocks, and sheaves. Klein grips are reusable and do not damage the cable because pulling tension remains uniform along the length of the grip. The mesh will fit either a single cable, or a bundle of cables.
Prefix Letter Code KPJ
Pulling, Junior-Duty, Closed-Mesh, Single-Weave, Light Duty, Flexible Eye
KPL
Pulling, Closed-Mesh, Single-Weave, Flexible Eye
KSRK
Slack-Pulling, Light-Duty, Split-Mesh, Single-Weave, Rod Closure, Offset Flexible Eye
KPM
Pulling, Medium-Duty, Closed-Mesh, Double-Weave, Flexible Eye
KSCK
Slack-Pulling, Meduim Duty, Closed-Mesh, Double-Weave, Offset Flexible Eye
KSSK
Slack-Pulling, Meduim Duty, Split-Mesh, Double-Weave, Lace Closure, Offset Flexible Eye
KP
Pulling, Heavy-Duty, Closed-Mesh, Double-Weave, Flexible Eye
KPS
Pulling, Heavy-Duty, with Rotating Eye, Closed-Mesh, Double-Weave
Klein pulling grips are woven of galvanized steel – strong and long lasting.
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Wire Mesh Grips
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
General Application Information KPJ junior-duty series is used for small-job requirements where pulling tensions are low. Typical uses are to connect insulated building wire bundles to pulling tape, and pull through conduit. KPL light duty grips are economical for applications such as industrial plant wiring and rewiring jobs, and in underground electrical construction where pulling tensions are low. KSRK light-duty, slack-pulling grips are split mesh, single-weave design with rod closure for quick installation. Application areas similar to KSSK series, except mesh lengths are shorter and for lower pulling loads. KPM medium-duty grips are flexible and easily handled; ideal for use where the exceptional strength of heavy-duty grips is not required. KSCK medium-duty slack-pulling grips with closed double-weave mesh are used for final placement of underground cable where cable end is available, or for removing cable. Standard lengths are used in restricted space for short pulls. Where space is not restricted, longer lengths are used for higher pulling loads. KSSK medium-duty slack-pulling grip applications are similar to the KSCK series except they are used where cable end is not available. Double-weave split mesh has lace closure. KP heavy-duty grip series are recommended for underground installations. KPS heavy-duty grip series are also recommended for underground installations. An additional feature of the KPS includes "rotating eye" to allow twists in the cable to spin out during slack periods.
308
www.kleintools.com > 800-553-4676
Catalog Number Explanation KPS Grip Type* and Mesh
—
050
—
Cat. No.** Size Code
2 Final Digit, if any, refers to mesh length range or actual dimension.
* See Prefix Letter Code explanation. ** On Junior-duty grips, initial digit "0" is omitted in Cat. No.
Example: Cat. No. KPS-050-2 is a heavy-duty pulling grip with a rotating eye, for use with cable diameters from .50" to .61", with medium-length mesh.
Pliers
Wire Mesh Grips
How to select proper grip eye and mesh type
Design Strength Applications and conditions of use for Klein mesh pulling grips vary so widely that it is impossible to set any meaningful standard for "breaking strength." With wire-mesh pulling grips, the holding power achieved is directly related to the length of mesh. The longer the mesh, the firmer the grip on the cable. For smaller-diameter cable, or where the weight to be pulled is less, short mesh grips will serve the purpose.
Drivers and Wrenches
There are three basic styles of pulling grips, together with a choice of wire mesh types and lengths to meet a wide variety of pulling requirements.
Strippers, Cutters, and Crimpers
WIRE MESH GRIPS INTRODUCTION
Conduit Tools and Measurement
1. Flexible Eye: Closed Mesh
Tool Kits
KPJ/KPL/KPM/KP This pulling-grip eye allows maximum flexibility to follow the line of pull, and is used when the end of the cable is available. Mesh selection depends on the weight of the material being pulled. Closed-mesh, single weave, flexible-eye grips are offered in lengths for junior-duty and light-duty use; closed-mesh, double-weave, flexible-eye grips are offered for medium-duty and heavy-duty use.
2. Rotating Eye: Closed Mesh
Safety, PPE and Comfort
KPS Recommended for heavier pulling jobs and underground wiring, this pulling grip eye is furnished on double-weave mesh grips in a wide range of lengths. The rotating eye compensates for pulling torque, relieving strain on the cable. Rotating-eye grips should not be used on rope or as a swivel.
3. Offset Flexible Eye: Split and Closed Mesh Jobsite Accessories
KSRK/KSCK/KSSK These slack-pulling grips come in three styles: KSRK single-weave split-mesh with rod closure (light duty, where cable end is not available), KSCK double-weave closed-mesh (for medium duty, where the end of the cable is available), KSSK double-weave split-mesh with lace closure (medium duty, where cable end is not available).
Tool Storage
How grips are attached to cable Closed-mesh grips simply slip over the cable where the cable end is accessible. Split-mesh grips are used when the end of the cable is not available. The grip is folded around the cable, and secured with a wire lace or steel rod (supplied with the grip) as follows:
Voice/Data/Video
1. Split mesh with lace closure Start at the lead end of the grip, threading the lace through the first two loops of the split, then pulling it through until ends are centered evenly. Cross the lace ends and thread through next two loops, and so on down the grip. Do not pull lacing too tight. Spacing of laced closure should be about the same as the mesh weave. When the end of the grip is reached, twist lacing strands tightly together; wrap ends of lace around grip, and twist again to secure. Excess may be cut off.
WARNING: Do not exceed rated capacity.
Power Tools and Accessories
Wire-Mesh Grips Warnings
Test and Measurement
2. Split mesh with rod closure Simply wrap the grip around the cable, then thread the rod through the loops, using a cork-screw motion. To remove, pull the rod out, and the grip is ready for re-use.
WARNING: Always match proper size and type of grip to application. WARNING: Grips are to be used for temporary installation, not for permanent anchorage. WARNING: When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
WARNING: Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
309
Lifting, Pulling, and Structural
> 800-553-4676
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
Wire Mesh Grips
WIRE MESH GRIPS SELECTION How to select the proper pulling grip for your application 1. Select the proper pulling-grip series (Prefix Letter Code…e.g. KPS) based on the "General Application Information" descriptions in the Wire-Mesh Grips Introduction on preceding pages. 2. Select grip size based on the outside diameter or circumference of the cable(s) to be pulled. Refer to reference tables (on this and following page) for convenience in determining cable diameters.
3. Use Pulling-Grip Selection Tables (on this and following page) to determine the "Size" portion of the Catalog Number for the cable diameter required. In the ordering tables (see following pages) this "Size" code is incorporated within the catalog number under the various griptype classifications.
Table 1 Pulling Grip Selection Table for One or More Cables of Equal Diameter to Be Pulled in One Grip 1. 2. 3.
Read across on top line for number of cables in one grip Read down for diameter of each cable Use Cat. No. size code to select catalog number of the required size grip
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Example: 3 Cables, each with diameter of 1.31" use grip with Cat. No. Size Code 250. Cable Diameters in Decimal Inches 1 Cable
2 Cables
3 Cables
4 Cables
5 Cables
6&7 Cables
8 Cables
9 Cables
Cat. No. Size Code
Grip Diam. Range
0.50–0.62 0.62–0.75
0.27–0.36 0.36–0.45
0.26–0.33 0.33–0.36
0.24–0.28 0.28–0.31
0.21–0.25 0.25–0.29
0.19–0.22 0.22–0.26
0.17–0.20 0.20–0.23
0.15–0.19 0.19–0.22
050 062
0.50–0.62 0.62–0.75
0.75–1.00
0.45–0.60
0.36–0.49
0.31–0.42
0.29–0.38
0.26–0.34
0.23–0.31
0.22–0.31
075
0.75–1.00
1.00–1.25
0.60–0.76
0.49–0.63
0.42–0.54
0.38–0.48
0.34–0.43
0.31–0.39
0.29–0.36
100
1.00–1.25
1.25–1.50
0.76–0.91
0.63–0.76
0.54–0.65
0.48–0.58
0.43–0.52
0.39–0.46
0.36–0.43
125
1.25–1.50
1.50–1.75
0.91–1.08
0.76–0.89
0.65–0.77
0.58–0.67
0.52–0.60
0.46–0.54
0.43–0.49
150
1.50–1.75
2.00–2.50
1.23–1.54
1.02–1.28
0.88–1.10
0.77–0.96
0.69–0.86
0.62–0.77
0.57–0.72
200
2.00–2.50
2.50–3.00
1.54–1.84
1.28–1.53
1.10–1.32
0.96–1.16
0.86–1.03
0.77–0.93
0.72–0.86
250
2.50–3.00
3.00–3.50
1.84–2.15
1.53–1.79
1.32–1.54
1.16–1.35
1.03–1.20
0.93–1.08
0.86–1.00
300
3.00–3.50
3.50–4.00
2.15–2.45
1.79–2.05
1.54–1.76
1.35–1.54
1.20–1.37
1.08–1.24
1.00–1.14
350
3.50–4.00
Table 2
Table 3
Pulling-Grip Selection Table for Cables of Different Diameters to Be Pulled in One Grip
Reference Table: Dimension Conversions for Ordering Tables
Grip Circumference Range Fractional Decimal Inches Inches
Cat. No. Size Code
1-37/64–1-15/16 1-37/64–2-3/8
1.57–1.94 1.57–2.37
062 050
Grip Diameter Range Fractional Decimal Inches Inches 1/2–5/8 5/8–3/4
Decimal Inches
.50–.62 .62–.75
0.12–0.24 0.25–0.36
Fractional Inches
Metric Dimensions (mm)
1/8–15/64 1/4–23/64
3.17–5.95 6.35–9.13
2-3/8–3-5/32
2.37–3.15
075
3/4–1
.75–1.00
0.37–0.49
3/8–31/64
9.52–12.30
3-5/32–3-15/16
3.15–3.94
100
1–1-1/4
1.00–1.25
0.50–0.61
1/2–39/64
12.70–15.48
3-15/16–4-23/32
3.94–4.72
125
1-1/4–1-1/2
1.25–1.50
0.62–0.74
5/8–47/64
15.88–18.65
4-23/32–5-33/64
4.72–5.51
150
1-1/2–1-3/4
1.50–1.75
0.75–0.99
3/4–63/64
19.05–25.00
6-19/64–7-55/64
6.29–7.86
200
2–2-1/2
2.00–2.50
1.00–1.24
1–1-15/64
25.40–31.35
7-55/64–9-7/16
7.86–9.43
250
2-1/2–3
2.50–3.00
1.25–1.49
1-1/4–1-31/64
31.75–37.70
9-7/16–11-1/64
9.43–11.01
300
3–3-1/2
3.00–3.50
1.50–1.99
1-1/2–1-63/64
38.10–50.40
11-1/64–12-37/64
11.01–12.58
350
3-1/2–4
3.50–4.00
2.00–2.49
2–2-31/64
50.80–63.10
2.50–2.99
2-1/2–2-63/64
63.50–75.80
"Grip Circumference Range" refers to circumference of all cables held together.
3.00–3.49
3–3-31/64
76.20–88.50
1. Measure the circumference of bundle of cables to be held.
3.50–3.99
3-1/2–3-63/64
88.90–101.20
2. Read down to locate correct range.
Example:
3. Read across for catalog number size code.
For four cables together with circumference of 6.35", use grip containing catalog number size code "200".
310
www.kleintools.com > 800-553-4676
See Wire Mesh Grips warnings on page 309
Pliers
Wire Mesh Grips
Strippers, Cutters, and Crimpers
Single-Weave, Flexible-Eye Pulling Grips
KPJ-50
Mesh Length 8.5" (21.6 cm) 10" (25.4 cm) 11.5" (29.2 cm) 14" (35.6 cm) 15" (38.1 cm) 18" (45.7 cm)
Maximum Safe Load 260 lb (118 kg) 560 lb (254 kg) 780 lb (354 kg) 1060 lb (481 kg) 1360 lb (617 kg) 1700 lb (771 kg)
Conduit Tools and Measurement
Cable Diameter 0.50" to 0.61" (12.70 to 15.59 mm) 0.75" to 0.99" (19.05 to 25.15 mm 1.00" to 1.24" (25.4 to 31.50 mm) 1.25" to 1.49" (31.75 to 37.85 mm) 1.50" to 1.74" (38.10 to 44.20 mm) 2.00" to 2.49" (50.80 to 63.25 mm)
Drivers and Wrenches
Cat. No. KPJ50 KPJ75 KPJ100 KPL125-1 KPL150-1 KPL200-1
Double-Weave, Flexible-Eye Pulling Grips
Cable Diameter 0.50" to 0.61" (12.70 to 15.59 mm) 0.75" to 0.99" (19.05 to 25.15 mm) 1.00" to 1.37" (25.4 to 34.80 mm) 0.75" to 0.99" (19.05 to 25.15 mm) 1.00" to 1.49" (25.4 to 37.85 mm) 0.75" to 0.99" (19.05 to 25.15 mm) 1.00" to 1.49" (25.4 to 37.85 mm) 1.50" to 1.99" (38.10 to 50.55 mm)
Mesh Length 13" (33 cm) 16" (40.6 cm) 18" (45.7 cm) 24" (61 cm) 24" (61 cm) 36" (91.4 cm) 36" (91.4 cm) 36" (91.4 cm)
Maximum Safe Load 480 lb (218 kg) 1030 lb (467 kg) 1420 lb (644 kg) 1360 lb (617 kg) 1920 lb (871 kg) 1360 lb (617 kg) 1920 lb (871 kg) 3280 lb (1488 kg)
Safety, PPE and Comfort
Cat. No. KPM050 KPM075 KPM100 KP075-24 KP100-24 KP075-36 KP100-36 KP150-36
Tool Kits
KPM075
Jobsite Accessories
Double-Weave, RotatingEye Pulling Grips KPS062-2
Maximum Safe Load 1120 lb (508 kg) 1360 lb (617 kg) 1360 lb (617 kg) 2560 lb (1161 kg) 2560 lb (1161 kg) 3280 lb (1488 kg) 5440 lb (2468 kg) 6600 lb (2994 kg) 8200 lb (3720 kg) 9600 lb (4354 kg) 3280 lb (1488 kg) 3280 lb (1488 kg) 5440 lb (2468 kg)
Test and Measurement
Mesh Length 16" (40.6 cm) 16" (40.6 cm) 20" (50.8 cm) 20" (50.8 cm) 21" (53.3 cm) 25" (63.5 cm) 26" (66 cm) 28" (71.1 cm) 30" (76.2 cm) 32" (81.3 cm) 33" (83.8 cm) 34" (86.4 cm) 36" (91.4 cm)
Voice/Data/Video
Cable Diameter 0.50" to 0.61" (12.70 to 15.59 mm) 0.620" to 0.740" (15.74 to 18.79 mm) 0.75" to 0.99" (19.05 to 25.15 mm) 1.00" to 1.24" (25.4 to 31.50 mm) 1.25" to 1.49" (31.75 to 37.85 mm) 1.50" to 1.99" (38.10 to 50.55 mm) 2.00" to 2.49" (50.80 to 63.25 mm) 2.50" to 2.99" (63.50 to 75.95 mm) 3.00" to 3.49" (76.20 to 88.65 mm) 3.5" to 3.99" (88.90 to 101.35 mm) 1.00" to 1.49" (25.4 to 37.85 mm) 1.50" to 1.99" (38.10 to 50.55 mm) 2.00" to 2.49" (50.80 to 63.25 mm)
Tool Storage
Cat. No. KPS050-2 KPS062-2 KPS075-2 KPS100-2 KPS125-2 KPS150-2 KPS200-2 KPS250-2 KPS300-2 KPS350-2 KPS100-3 KPS150-3 KPS200-3
Slack-Pulling, Offset Flexible-Eye Pulling Grips
Cat. No. KSCK100-1 KSSK125-1
Mesh Length 15" (38.1 cm) 16" (40.6 cm)
Maximum Safe Load 800 lb (363 kg) 800 lb (363 kg)
www.kleintools.com > 800-553-4676
311
Lifting, Pulling, and Structural
See Wire Mesh Grips warnings on page 309
Cable Diameter 1.00" to 1.24" (25.4 to 31.50 mm) 1.25" to 1.49" (31.75 to 37.85 mm)
Power Tools and Accessories
KSCK100-1
LIFTING AND PULLING
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
• These are NOT occupational protective devices. NOT for human support. • Sheaves are strong, yet lightweight aluminum alloy with all-bronze bushings. • Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load.
• All Klein block and tackle use high-quality, 3/8” diameter rope. • Available with standard snap hooks or guarded snap hooks (with snap hook nose lengthened to extend over the latch or keeper). • Choice of forged hook Cat. No. 258 or swivel hook Cat. No. 259. • Catalog numbers followed by S/R have rope spliced to block. • Maximum safe load is 750 lbs. (338 kg).
Pliers
Hooks and Rope
258
Heavy-Duty Snap Hook • Snaps on with one hand hook may be used on many • Forged conventional steel blocks, 4" (10.2 cm)
Eye I.D. 5/8" (16 cm)
Throat Opening 1-7/8" (4.8 cm)
Overall Length 5.5" (14 cm)
Cat. No. 455
Overall Length 5" (12.7 cm)
•
Throat Opening 1/2" (1.3 cm)
Overall Length 443A 5.5" (14 cm)
snap hook with eye at 90° to opening Maximum safe load 1500 lb (675 kg)
Cat. No. 443A
Overall Length 6.5" (16.5 cm) 5" (12.7 cm)
Cat. No. 2012
Throat Opening 21/32" (1.7 cm)
Overall Length 4.375" (11.1 cm)
2012
Overall Width 1.625" (4.1 cm)
Tool Storage Voice/Data/Video
1804-60
Swivel Snap Hook swivel snap hook made for • Bronze use on canvas buckets • Maximum safe load 150 lb (68 kg)
Rope • Works with all block and tackle products • High-quality, 3/8" (1 cm) diameter rope • Maximum safe load 750 lb (340 kg)
Included 75' (22.9 m) of 5/16" (0.8 cm) Rope with Cat. No. 443A Snap 75' (22.9 m) of 5/16" (0.8 cm) Rope with Cat. No. 470 Swivel Snap
Cat. No. 48502
Diameter 3/8" (1 cm)
Tensile Strength 3600 lb (1632 kg)
Overall Length 25' (7.6 m)
www.kleintools.com > 800-553-4676
313
Lifting, Pulling, and Structural
WARNING: This is NOT an occupational protective device. NOT for human support.
48502
Power Tools and Accessories
1804-60
Description Polypropylene Hand-Line with Snap Hook Polypropylene Hand-Line with Swivel Hook
Test and Measurement
of 5/16" (0.8 cm) three-strand polypropylene • Made rope spliced to eye of snap hook • Both lines 75' (22.9 m) long • Forged steel with swivel clevis and quick-acting plunger-style latch • Maximum safe load 250 lb (113 kg) Cat. No. 1803-60
Jobsite Accessories
Polypropylene Hand-Lines with Snap Hook
Safety, PPE and Comfort
Throat Opening 1-7/8" (4.8 cm) 5/8" (1.6 cm)
Eye I.D. 1" (2.5 cm)
Tool Kits
259
470
Swivel Opening 1-3/16" x 1" (3 x 2.5 cm) 1-3/16" x 1" (3 x 2.5 cm)
Throat Opening 1" (2.5 cm)
Snap Hook • General-purpose forged
hook will engage with snap on Klein block and tackle Cat. Nos. 1802-30 and H1802-30 Swivel prevents twisting and kinking of rope Cat. No. 470 has plunger latch Maximum safe load 750 lb (340 kg)
Cat. No. 259 470
Eye I.D. 15/16" (2.4 cm)
455
Conduit Tools and Measurement
Swivel Anchor Hook • Swivel clevis on this forged
• • •
or smaller Maximum safe load 8000 lb (3629 kg)
Drivers and Wrenches
• Cat. No. 258
Strippers, Cutters, and Crimpers
Anchor Hook hook is designed to fit under • Forged insulator and engage pin of cross arm • Maximum safe load 750 lb (340 kg)
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
Blocks and Hoists Blocks • Blocks without ropes and hooks • Made of light galvanized steel and aluminum alloy • Sheaves have bronze bushings • Maximum safe load 750 lb (340 kg) Cat. No. 267 H267 268 H268
267
Description Self-locking Block Without Rope and Hook Block with Nose Extended Over Keeper Block with Eye to Splice Line to Block Block with Eye and Nose Extended Over Keeper
H267
Tool Kits
268
Howe Wire Tool • Strap is made of tough Klein-Kord™ • Swivel hook is forged steel with large opening • Shank of hook is lengthened to reach under insulator • Other end has device to hold the load at any distance • All metal parts are galvanized • Maximum safe load 500 lb (225 kg)
Web Strap Ratchet Hoist non-conductive drum knob allows web slack to be • Large, adjusted with ease • 360° handle rotation • 3/4 ton single line and 1-1/2 ton double line load rating • Tight ratcheting mechanism allows precise tensioning • Meets ANSI/ASME B30.21-2005 & B30.10-2009 standards • Cat. No. KN1500PEXH includes hot rings • Cat. No. KN1600PEX includes a removable handle
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
H268
Line Load Rating: 1500 lb (675 kg) • Single Min. to Max. Pulling Distance inches (mm):
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
20" to 138" (500 to 3500 mm)
Line Load Rating: 3000 lb (1350 kg) • Double Min. to Max. Pulling Distance inches (mm):
1720-20N
26" to 79" (700 to 2000 mm) 170220HH
Cat. No. 1702-20N 1702-20HH
314
Overall Width 1" (2.5 cm) 1.5" (3.8 cm)
www.kleintools.com > 800-553-4676
Cat. No. KN1500PEX KN1500PEXH KN1600PEX
Included — Hot Rings Removable Hnadle
KN1600P-EX
WARNING: This is NOT an occupational protective device. NOT for human support.
Pliers
Block and Tackle
Strippers, Cutters, and Crimpers
Block and Tackle with Standard Hooks • • • •
267 Block
268 Block
• • • •
• • • •
258 Anchor Hook
• •
259 Swivel Anchor Hook — —
— —
• •
Rope Spliced to Component Number — 268 Block — 268 Block
Conduit Tools and Measurement
Cat. No. 1802-30 1802-30SR 1802-30S 1802-30SSR
Drivers and Wrenches
Sheaves are strong, yet lightweight aluminum alloy with all-bronze bushings Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load All Klein block and tackle use high-quality, 3/8" (1 cm) diameter rope Available with standard snap hooks or guarded snap hooks (with snap hook nose lengthened to extend over the latch or keeper) • Choice of forged hook (Cat. No. 258) or swivel hook (Cat. No. 259) • Catalog numbers followed by S/R have rope spliced to block • Maximum safe load is 750 lb (338 kg)
Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage
1802-30
1802-30SR
Voice/Data/Video Test and Measurement Power Tools and Accessories
1802-30SSR 1802-30S
www.kleintools.com > 800-553-4676
315
Lifting, Pulling, and Structural
WARNING: This is NOT an occupational protective device. NOT for human support.
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches
Block and Tackle with Guarded Hooks • • • •
Sheaves are strong, yet lightweight aluminum alloy with all-bronze bushings Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load All Klein block and tackle use high-quality, 3/8" (1 cm) diameter rope Available with standard snap hooks or guarded snap hooks (with snap hook nose lengthened to extend over the latch or keeper) • Choice of forged hook (Cat. No. 258) or swivel hook (Cat. No. 259) • Catalog numbers followed by SR have rope spliced to block • Maximum safe load is 750 lb (338 kg)
Cat. No. H1802-30 H1802-30SR H1802-30S H1802-30SSR
H267 Block
H268 Block
258 Anchor Hook
• • • •
• • • •
• •
259 Swivel Anchor Hook — —
— —
• •
Rope Spliced to Component Number — H268 Block — H268 Block
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
Block and Tackle
H1802-30SR
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
H1802-30
Lifting, Pulling, and Structural
H1802-30S
316
www.kleintools.com > 800-553-4676
H1802-30SSR
WARNING: This is NOT an occupational protective device. NOT for human support.
Strippers, Cutters, and Crimpers
STRUCTURAL
CONSTRUCTION
Pliers
Drivers and Wrenches Conduit Tools and Measurement Tool Kits
Safety, PPE and Comfort Jobsite Accessories
Rebar Hickeys • Lightweight rebar hickey has exceptionally durable steel-alloy head and extra-strong handle to withstand extreme conditions
Hickey Size 1a 2 3 4
Bends Rebar Sizes No. 3 - 0.375" (9.525 mm) Dia. and No. 4 - 0.500" (12.700 mm) Dia. Rebar Sizes No. 5 - 0.625" (15.875 mm) Dia. Rebar Sizes No. 6 - 0.750" (19.050 mm) Dia. Rebar Sizes No. 7 - 0.875" (22.225 mm) Dia., No. 8 - 1.000" (25.400 mm) Dia., and No. 9 - 1.128" (28.651 mm) Dia.
Bend Angle Double 65° and 90° Single 65° Single 65° Single 65°
Handle Length 24" (61 cm) 40" (101.6 cm) 40" (101.6 cm) 60" (152.4 cm)
Voice/Data/Video
Cat. No. 64309 64310 64311 64312
Grizzly™ Bar
Cat. No. 64306
Overall Length 55-1/2" (141 cm)
Body Diameter 1-1/2" (3.8 cm)
End 60°
64306
Power Tools and Accessories
A heavy, strong, multi-purpose tool that saves time and effort on the job The 3" (7.6 cm) width protects concrete when stripping forms Efficient blade angle and 55.5" (141 cm) total length provide high leverage as a crow bar, as well as a nail and spike puller Blade is forged and hardened alloy with keyhole nail-pulling slot in center and "V" notch in tapered edge Can be used to help align walls during tilt-up construction, to roll and align large pipe, to remove shingles and flooring, and for many other stripping and prying tasks
Test and Measurement
• • • • •
Tool Storage
64310
WARNING: Always wear approved personal protective equipment.
317
Lifting, Pulling, and Structural
www.kleintools.com > 800-553-4676
Pliers Tool Kits
Conduit Tools and Measurement
Drivers and Wrenches
Strippers, Cutters, and Crimpers
Structural Tools Connecting Bar Holder with Lock Collar • Fits Klein 7/8" (2 cm) connecting bars (Cat. Nos. 3246 and 3248) • Leather construction • Tunnel loop allows for weight distribution on belt • Fits belts up to 3.5" (9 cm) wide • Replacement lock collar • Lock collar (Cat. No. 5459C) available
5420L
Ironworker's Heavy-Duty Tie-Wire Belt • Strong double-tongue buckle with keeper separate reel-strap with its own buckle that lets you quickly and • Has conveniently put on or take off a Klein tie-wire reel and optional pad
•
5459C
without removing the belt or your tool pouch Leather construction
Cat. No. 5420S 5420 5420L 5420XL
Overall Width 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm)
WARNING: Lock collar should ONLY be used on Klein 7/8" connecting bars. Lock collar must be installed on connecting bar before using holder.
Waist Size 32" to 40" (81.3 to 101.6 cm) 36" to 44" (91.4 to 111.8 cm) 40" to 48" (101.6 to 121.9 cm) 44" to 52" (111.8 to 132.1 cm)
Cat. No.
Tie-Wire Reel Pad Worn on the belt under the Klein • Tie-Wire Reel (Cat. No. 27400) Made of 3/16" (0.5 cm) thick rigging leather • Underside has sponge-rubber • pad to minimizea hip fatigue
Jobsite Accessories
Safety, PPE and Comfort
5459SLVR
Cat. No. 27450
Belt Connection Slotted
Belt Width
Overall Width 7" (17.8 cm)
Overall Height 0.75" (1.9 cm)
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Tie-wire reel and ironworker's heavy-duty tie-wire belts also available.
Lifting, Pulling, and Structural
Overall Overall Length Width 3" (7.6 cm) 2" (5.1 cm)
Overall Height 6.75" (17.2 cm)
27450
Overall Length 7" (17.8 cm)
Up to 2" (5.1 cm)
Belt Belt Width Connection Tunnel Up to 3.5" (9 cm)
5459SLVR
Tie-Wire Reel redesigned tie-wire reel allows • Klein's loading pre-coiled tie wire onto the reel
7FWSS10025
Fox Wedges for splitting mating surfaces and for packing • Used machinery and structures before fixing used in the marine environment because • Also of its corrosion-resistant properties • Forged from stainless steel for greater hardness and non-magnetic properties • Ground blade with fine edge for easy entry • Precision heat treated to best suit product application
without having to remove the cover lightweight reel is smooth • Rugged, aluminum alloy with wear parts
• •
made of steel Designed for left or right hand use Large, comfortable rewind knob
Cat. No. 27400
Overall Width 2.781" (7.1 cm)
27400
Dimensions 6-1/4" (15.9 cm) Diameter x 2-25/32" (7.1 cm) Width
Star Dropper Hammer • Used for driving in star (fencing) droppers • Also used to drive in marker pegs, stakes and concreting stakes • Heavy unit drives droppers very quickly and efficiently • Solid steel handles and slug are welded together, which gives greater strength Cat. No. 5SDSH
318
Overall Length 33.859" (86 cm)
Diameter 2.125" (5.4 cm)
www.kleintools.com > 800-553-4676
Cat. No. 5FW07538 5FW10025 5FW17550 7FW27050 7FWSS10025
Overall Length 3" (7.6 cm) 4" (10.2 cm) 7" (17.8 cm) 11" (27.9 cm) 4" (10.2 cm)
Overall Width 1.5" (3.8 cm) 1" (2.5 cm) 2" (5.1 cm) 2" (5.1 cm) 1" (2.5 cm)
Material Steel Steel Steel Steel Stainless Steel
Thickness 0.5" (1.3 cm) 0.313" (0.8 cm) 0.5" (1.3 cm) 1" (2.5 cm) 0.313" (0.8 cm)
5SDSH
Pliers
Structural Tools
Strippers, Cutters, and Crimpers
3242
3245
Round Bars
Overall Length 30" (76.2 cm) 36" (91.4 cm) 24" (61 cm) 30" (76.2 cm)
Body Diameter 3/4" (1.9 cm) 7/8" (2.2 cm) 3/4" (1.9 cm) 3/4" (1.9 cm)
End 15° 15° 15° Straight
Body Diameter 3/4" (1.9 cm) 7/8" (2.2 cm) 7/8" (2.2 cm) 3/4" (1.9 cm) 7/8" (2.2 cm) 3/4" (1.9 cm)
End 15° 15° 15° 15° 15° Straight
3261
Diameter 0.688" (1.8 cm) 0.813" (2.1 cm) 0.938" (2.4 cm) 1.063" (2.7 cm)
Point Diameter 0.313" (7.95 mm) 0.438" (11.11 mm) 0.500" (12.70 mm) 0.563" (14.29 mm)
Standard Bull Pins
Tool Storage
Broad Head Bull Pins
Overall Length 7.5" (19.1 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm)
Jobsite Accessories
Cat. No. 3260 3261 3262 3263
Safety, PPE and Comfort
Barrel-Type Drift Pins • Machined from quality alloy steel • Tapers are uniform and blend into body diameter • Tough, drop-forged steel will properly end-pein in use • Heat-treated for strength • Black finish for rust resistance
Overall Length 30" (76.2 cm) 36" (91.4 cm) 36" (91.4 cm) 24" (61 cm) 30" (76.2 cm) 30" (76.2 cm)
Tool Kits
Cat. No. 3245 3246 3246TT 3247 3248 3241
Hex Bars
Cat. No. 3242 3243 3244 3240
Conduit Tools and Measurement
Hex and Round Bars • • Forged fit-up bar is pointed on one end • Chisel-end is at a 15° angle to give greater leverage • Cat. No. 3246TT features tether hole for working at height
Drivers and Wrenches
3246TT
3255TT 3265
Overall Length 13.75" (34.9 cm) 10" (25.4 cm)
Diameter 1-1/4" (3.2 cm) 1-1/16" (2.7 cm)
Point Diameter 0.313" (7.9 mm) 0.25" (6.4 mm)
Cat. No. 3259 3265
Overall Length 12" (30.5 cm) 12" (30.5 cm)
Diameter 1-5/16" (3.3 cm) 1-1/4" (3.2 cm)
Point Diameter 0.44" (11.1 mm) 0.44" (11.1 mm)
Standard Bull Pins with Tether Hole For Working At Height
3259TT
12" (30.5 cm)
1-5/16" (3.3 cm)
0.44" (11.1 mm)
Power Tools and Accessories
Cat. No. 3255 3256
• Machined from quality alloy steel • Heat-treated for strength • Black finish for rust resistance
OSHA 1926.301 (c) specifically states: “Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads.”
Broad Head Bull Pins with Tether Hole For Working At Height
3255TT 3256TT
13.75" (34.9 cm) 10" (25.4 cm)
1-1/4" (3.2 cm) 1-1/16" (2.7 cm)
Test and Measurement
Forged, heat-treated bull pin increases efficiency by providing a larger • striking surface head and smooth blending of radii increase strength and • Angled reduce the danger of chipping the head, squared-off shoulders have been forged to provide a • Below surface for applying wrench to loosen wedged bull pins Added resistance to “mushrooming” permits much longer use than • conventional designs and the even taper reduces binding and hang-up Cat. Nos. 3256TT and 3255TT feature tether hole for working at height •
3259TT
Voice/Data/Video
3255
0.313" (7.9 mm) 0.25" (6.4 mm)
www.kleintools.com > 800-553-4676
319
Lifting, Pulling, and Structural
OSHA 1926.301 (c) specifically states: “Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads.”
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Structural Tools Extra-Wide Adjustable-Head Construction Wrenches • Eliminates the need for carrying several fixed-size wrenches from select alloy steel with continuous taper handle for aligning • Forged bolt and/or rivet holes • Industrial black finish for corrosion resistance • Includes lanyard hole for easy tool tethering jaws are individually chosen and assembled by • Precision-machines hand for smooth operation • Heat-treated for long life Cat. No. 3239 3227
Overall Length 16" (40.6 cm) 11" (27.9 cm)
3227
Handle Color Black Black
Handle Finish Black Oxide Black Oxide
1/2" Drive Ratcheting Construction Wrench • • Reversible ratchet • Eliminates the need for carrying several fixed-size wrenches from select alloy steel with continuous taper handle for aligning • Forged bolt and/or rivet holes • Industrial black finish for corrosion resistance
Jaw Capacity 1-5/8" (4.1 cm) 1-7/16" (3.7 cm)
3238
Cat. No. 3238
Overall Length 15" (38.1 cm)
Spud Wrenches • Forged from select alloy steel to withstand high-leverage and heavy loads • Extra-heavy-duty head area gives maximum strength and durability taper of handle makes lining-up bolt holes easy and works on a • Continuous range of bolt-hole sizes without binding • Extra-large hub area works on larger diameter holes better than other wrenches number, bolt size and nominal opening size are stamped on every • Catalog wrench for easy identification • American Bridge design • Cat. Nos. 3212TT, 3213TT, and 3214TT feature tether hole for working at height
Size 1/2"
3231
3214TT
Cat. No.
Nut Type
Square Nut Size Regular Nut Size Heavy Nut Size
Nominal Opening
Head Width
Taper Diameter
Overall Length
3210 3211 3212 3213 3214 3219 3220 3221 3222 3223 3224 3231 3232
U.S. Regular and Heavy U.S. Heavy U.S. Heavy U.S. Heavy U.S. Heavy U.S. Regular and Heavy U.S. Regular U.S. Regular U.S. Regular U.S. Regular U.S. Regular Utility Utility
— — — — — 7/16" (1.1 cm) 1/2" (1.3 cm) 5/8" (1.6 cm) 3/4" (1.9 cm) 7/8" (2.2 cm) 1" (2.5 cm) — —
1/2" (1.3 cm) 5/8" (1.6 cm) 3/4" (1.9 cm) 7/8" (2.2 cm) 1" (2.5 cm) 7/16" (1.1 cm) — — — — — 9/16" (1.4 cm) 5/8" (1.6 cm)
7/8" (2.2 cm) 1-1/16" (2.7 cm) 1-1/4" (3.2 cm) 1-7/16" (3.7 cm) 1-5/8" (4.1 cm) 3/4" (1.9 cm) 13/16" (2.1 cm) 1" (2.5 cm) 1-1/8" (2.9 cm) 1-5/16" (3.3 cm) 1-1/2" (3.8 cm) 15/16" (2.4 cm) 1-1/16" (2.7 cm)
2.25" (5.7 cm) 2.25" (5.7 cm) 2.5" (6.4 cm) 3" (7.6 cm) 3.625" (9.2 cm) 2.25" (5.7 cm) 2.25" (5.7 cm) 2.25" (5.7 cm) 2.5" (6.4 cm) 3" (7.6 cm) 3.625" (9.2 cm) 2.25" (5.7 cm) 2.5" (6.4 cm)
7/8" to 3/16" (2.2 to 0.5 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 1" to 1/4" (2.5 to 0.6 cm) 1-1/8" to 9/32" (2.9 to 0.7 cm) 1-1/8" to 1/4" (2.9 to 0.6 cm) 7/8" x 1/2" (2.2 to 1.3 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 1" to 1/4" (2.5 to 0.6 cm) 1-1/8" to 9/32" (2.9 to 0.7 cm) 1-1/8" to 1/4" (2.9 to 0.6 cm) 7/8" to 3/16" (2.2 to 0.5 cm) 1" to 1/4" (2.5 to 0.6 cm)
14.75" (37.5 cm) 14.75" (37.5 cm) 16.625" (42.2 cm) 17.375" (44.1 cm) 18" (45.7 cm) 14.75" (37.5 cm) 14.75" (37.5 cm) 14.75" (37.5 cm) 16.625" (42.2 cm) 17.375" (44.1 cm) 18" (45.7 cm) 14.75" (37.5 cm) 16.625" (42.2 cm)
3/4" (1.9 cm) 7/8" (2.2 cm) 1" (2.5 cm)
1-1/4" (3.2 cm) 1-7/16" (3.7 cm) 1-5/8" (4.1 cm)
2.5" (6.4 cm) 3" (7.6 cm) 3.625" (9.2 cm)
1" to 1/4" (2.5 to 0.6 cm) 1-1/8" to 9/32" (2.9 to 0.7 cm) 1-1/8" to 1/4" (2.9 to 0.6 cm)
16.625" (42.2 cm) 17.375" (44.1 cm) 18" (45.7 cm)
9/16" (1.4 cm) — — — — 1/2" (1.3 cm) — — 3/4" (1.9 cm) 7/8" (2.2 cm) 1" (2.5 cm) 5/8" (1.6 cm) —
Spud Wrenches With Tether Hole For Working At Height
3212TT 3213TT 3214TT
320
U.S. Heavy U.S. Heavy U.S. Heavy
— — —
— — —
www.kleintools.com > 800-553-4676
Pliers
Alphabetical Page
A
Coaxial......................................... 232–233 Insulated ........................................36, 144 Pliers ..................... 14–15, 23–24, 26, 47, 235 Ratcheting ......................................37, 234 Sheet Metal ...........................................46 Twisted Pair......................................... 234 Wire Strippers ........................................35
D Datacom .......................................... 231–252 Diagonal-Cutting Pliers ...................... 17–21, 142 Digital Levels ........................................... 129 Distance Measuring ................................... 132 Drift Pins ............................................... 319 Drill Bits .......................................... 284–288 Drill/Tap................................................. 286 Duct Tools ................................................48
E Earbuds, Bluetooth®................................... 180 Electrical Test Kits ............................... 257, 260 Electrical Testers................................. 263–267 Electrode Bags ................................... 191, 229 Eyewear ........................................... 158–159
Power Tools and Accessories Lifting, Pulling, and Structural
321
Test and Measurement
www.kleintools.com > 800-553-4676
Voice/Data/Video
G Gas Leak Detector ..................................... 272 Glove Bags ............................................. 218 Gloves Bags ................................................. 218 Camouflage ......................................... 164 Cold Weather ....................................... 165 Cowhide ............................................. 166 Electrician’s ......................................... 165
Tool Storage
Face Mask .............................................. 159 Fish and Glow Rod Kit ................................ 112 Fish and Glow Rods................................... 113 Fish Rod Carrying Bag................................ 113 Fish Rods ......................................... 112–114 Attachments ........................................ 113 Fish Tape Repair Kit ................................... 111 Fish Tapes ........................................ 108–111 Accessories ......................................... 111 Fiberglass ..................................... 109–110 Multi-Groove ........................................ 109 Steel ................................................. 110 Flashlights ........................................ 170–174 Flex Bit .................................................. 285 Folding Rules .......................................... 132 Fox Wedges ............................................ 318
Jobsite Accessories
F
Safety, PPE and Comfort
C Cable Benders............................................43 Cable Boots ............................................ 238 Cable Clips ............................................. 240 Cable Cutting Tools Battery-Operated ............................. 279–280 BX/Armored ......................................... 119 Cable Cutters .............................. 39–43, 144 Cable Cutters Ratcheting ....................... 42–43 Coaxial.................................................40 Insulated ..............................................39 Sheath Splitting Knives ..............................57 Skinning Knives ......................................56 Splicing................................................57 Utility ............................................. 41–42 Cable Grips ....................................... 290–306 Cable Knives ........................................ 56–57 Sheath Splitting ......................................57 Skinning...............................................56 Splicing................................................57
Page
Tool Kits
Backpacks ........................................ 208–210 Bags................................... 207–221, 224–229 Bars Grizzly™ ............................................. 317 Hex/Round .......................................... 319 Batteries ................................................ 182 Chargers and Cables ............................... 184 Power Station ................................ 182–183 Solar Panel.......................................... 183 Battery-Operated Tools ......................... 276–281 Blocks ................................................... 314 Bolt Cutters...............................................44 Borescopes ............................................. 270 Box Wrenches ...........................................92 Boxes, Compartment.................................. 223 Bubble Levels .................................... 127–129 Buckets Canvas......................................... 225–227 Hook ................................................. 230 Load Rated.......................................... 225 Oval .................................................. 227 Bull Pin and Bolt Bags .......................... 190, 192 Bull Pins ................................................ 319 BX and Armored Cable Cutter........................ 119
Cable Management .............................. 239–241 Cable Management Sleeves .......................... 241 Cable Preparation...................................... 232 Cable Stapler ........................................... 239 Cable Stripping Tools .............................43, 232 Radial Strippers .................................... 232 Cable Termination ............................... 232–235 Cable Testing ..................................... 246–252 Cable Tie Roll .......................................... 240 Can Wrench ........................................94, 235 Carbon Monoxide Meter .............................. 272 Caution Tapes .......................................... 168 Chargers and Cables .................................. 184 Chicago™ Grips.................................. 300–304 Chisels .................................................. 105 Cinch Straps ........................................... 241 Circuit Breaker Finder ................................. 267 Circuit Tester ........................................... 267 Clamp Meters .................................... 254–257 Carrying Cases ..................................... 274 Claw Milled Hammer .................................. 102 Coaxial ................................ 232–236, 242–252 Installation Kits ............................... 242–245 Testers ......................................... 247–252 Tools ..................................... 232–235, 242 Coaxial Hex-Crimp Die ................................ 235 CoaxMap™ Kit ......................................... 251 Commander™ .................................... 250–251 Compression Connectors....................... 238–239 Compression Crimpers ............................... 232 Conduit Benders ....................................... 118 Conduit Locknut Wrench .........................94, 119 Conduit Reamers ...................................... 120 Conduit Scoring Tool.................................. 119 Conduit Tools .................................... 117–121 Accu-Bend Levels .................................. 127 Benders ............................................. 118 BX/Armored Cable Cutter ......................... 119 Knockout Punches ................................. 121 Locknut Wrench................................94, 119 Pliers ............................................14, 120 Reamers............................................. 120 Scoring Tool ........................................ 119 Connecting Bars ....................................... 319 Connectors Coaxial............................................... 238 Compression ................................. 238–239 IDC ................................................... 235 Pass-Thru ........................................... 238 Twisted Pair (RJ & CAT) .......................... 238 Construction Tools .............................. 317–320 Continuity Testers ..................................... 266 Coolers.................................................. 179 Cooling Gear ........................................... 161 Crimping Tools Battery-Operated ............................. 280–281
Item
Conduit Tools and Measurement
B
Page
Drivers and Wrenches
Aerial Aprons........................................... 230 Anchor Hook ........................................... 313 Anchors................................................. 288 Arbors................................................... 282 Auger Bits ........................................ 284–285
Item
Strippers, Cutters, and Crimpers
Item
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Alphabetical Item
Page
“Extreme” ........................................... 164 “Grip”................................................ 164 High Dexterity ...................................... 164 Jersey ............................................... 165 Leather .............................................. 163 Lineman ............................................. 166 Utility ................................................ 163 Wire Pulling......................................... 163 Grips .............................................. 290–311 Chicago™ ..................................... 300–304 Cleaning Brush Set ................................ 306 Haven’s™............................................ 304 Parallel Jaw ................................... 305–306 Grizzly™ Bar............................................ 317
H Hammers ......................................... 101–103 Dead Blow .......................................... 103 Electrician’s Hammers............................. 102 Lineman’s ..................................... 102–103 Non-Sparking....................................... 103 Sledge ............................................... 103 Straight-Claw ....................................... 102 Hand Cleaning Towels ................................ 168 Hard Hats Accessories ................................... 155–158 Cooling Fan ......................................... 158 Non-Vented, Class E ............................... 152 Vented, Class C..................................... 152 Haven’s™ Grips ........................................ 304 Headlamps ....................................... 156–157 Hex Bars ................................................ 319 Hex Drivers ............................................. 287 Hex-Keys ...........................................96–100 Folding ................................................99 L-Style............................................... 100 Metric..................................................98 SAE ....................................................97 T-Handle.......................................... 97–99 TORX® .................................................98 High Voltage Testers .................................. 274 Hoist .................................................... 314 Hole Saws ........................................ 282–283 Adjustable........................................... 283 Bi-Metal ............................................. 282 Carbide .............................................. 283 Hooks Aerial ................................................ 230 Anchor............................................... 313 Snap ........................................... 230, 313 Howe Wire Tool........................................ 314 HVAC Tools Crimpers and Cutters ........................... 46–47 Duct....................................................48 Snips ..................................................46
322
www.kleintools.com > 800-553-4676
Item
Page
Swaging Punch ..................................... 123 Tube Bender ........................................ 123 Tube Cutter.......................................... 123
I IDC Connectors ....................................26, 235 Illuminated Fish Rod Tip.............................. 113 Illumination....................................... 170–178 Flashlight...................................... 171–174 Headlamps ........................ 156–157, 175–177 Magnetic ................................ 171, 173–174 Rechargeable ..................... 156–157, 171–177 Worklight ...................................... 171, 178 Impact and Torque Drivers .............................78 Impact Flip Sockets .....................................79 Impact Socket.................................... 276–277 Impact Tools ..................................... 276–278 Impact Wrenches ...................................... 278 Insulated Tools Cable Cutting ...................................39, 144 Crimper..........................................36, 144 Nut Drivers.......................................... 147 Pliers ....... 13–15, 18–20, 23, 27, 32–33, 142–143 Screwdrivers ...........................66–68, 74, 146 Skinning Knife ..................................56, 144 Tool Kits ............................................. 147 Wire Strippers ...................................... 144 Ironworker’s Belt ................................................... 318 Buckets.............................................. 225 Bull Pins............................................. 319 Bull Pin/Bolt Bags.................................. 192 Drift Pins ............................................ 319 Holders .............................................. 195 Pliers ..................................................16 Round Bars ......................................... 319 Wrenches .............................................95
J Jab Saws .................................................61 Jobsite Accessories ............................. 169–184 Jobsite Fan ............................................. 181 Jobsite Speaker .................................. 180–181
K Kits ...................................................... 260 Knee Pads .............................................. 167 Knife and Scissors Sharpener .........................60 Knives ................................................ 49–57 Cable.............................................. 56–57 Insulated ........................................56, 144 Pocket ............................................ 49–53 Sharpening ............................................60
Item
Page
Utility ............................................. 54–55 Knockout Punch ....................................... 121
L LAN Explorer™ Tester ................................. 247 LAN Scout™ Jr. Tester ................................ 247 LanMap™ Kit ........................................... 251 Laser Distance Measurer ............................. 132 Levels ............................................. 124–129 Bubble ......................................... 127–128 Digital................................................ 129 Laser ........................................... 125–127 Self-Leveling ........................................ 125 Self-Leveling Planar ............................... 126 Tripod ................................................ 126 Li-Ion Battery .......................................... 126 Light Meter ............................................. 273 Line Splitter ............................................ 262 Line-Hose Bag ......................................... 229 Lineman Bags .................................... 228–229 Lineman Buckets ................................ 225–227 Lineman’s Pliers .............................. 12–15, 142 Load Rated Buckets ................................... 225 Lockouts ................................................ 168 Long-Nose Pliers ................................... 22–26
M Magnetic Wire Puller .................................. 115 Magnetizer................................................64 Manometer ............................................. 271 Meter Accessories ............................... 261–262 Carrying Cases ..................................... 274 Magnetic Hangers .................................. 262 Test Leads........................................... 262 Meters Carbon Monoxide .................................. 272 Carrying Cases ..................................... 274 Clamp .......................................... 254–257 Gas Leak Detector ................................. 272 Light ................................................. 273 Moisture ............................................. 273 Multimeter .................................... 258–260 USB .................................................. 273 Mobile Phone Holders Tradesman Pro™ ............................. 181, 203 Modular Crimpers ............................... 233–234 Moisture Meter ........................................ 273 Multimeters ...................................... 258–260 Carrying Cases ..................................... 274 Kits ................................................... 260
Pliers
Alphabetical Page
N
Outlet Tester...................................... 266–267 Oval Buckets ........................................... 227 Hooks................................................ 230
R
Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
323
Tool Storage
www.kleintools.com > 800-553-4676
Jobsite Accessories
S Safety Glasses ................................... 158–159 Safety Helmets ......................................... 154 Accessories ......................................... 154 Cooling Fan ......................................... 158 Visors ................................................ 154 Safety Lamp............................................ 157 Safety Vest ............................................. 160 Saws Adjustable Hole Saw ............................... 283 Blades .................................................62 Carbide Hole Saws ................................. 283 Hacksaw...............................................62 Hand .............................................. 61–62
Hole Saws..................................... 282–283 Jab .....................................................61 Reciprocating....................................... 283 Scissors ............................................. 58–60 Sharpening ............................................60 Scotchlok (IDC) ..........................................26 Scout® Pro Tester ..................................... 248 Scout® Pro Tester Kits .......................... 248–249 Scratch Awls .............................................84 Screwdrivers ........................................ 65–78 Bits .........................................75, 287–288 Cushion-Grip .................................... 66–74 Demolition ............................................68 Electronics ............................................76 Impact and Torque ...................................78 Insulated ...............................66–68, 74, 146 Interchangeable .................................... 146 Magnetizer ............................................64 Multi-Bit .......................................... 70–72 Plastic-Handle ................................... 76–77 Precision ......................................... 72–73 Replacement Parts...................................75 Screw-Holding ................................... 69, 77 Slim-Tip ............................................. 145 Tamperproof ..........................................74 Torque .................................................78 Wire Bending .........................................69 Sharpener ................................................60 Sheet Metal Tools .................................. 45–48 Crimper ................................................46 Hole Cutter............................................47 Snips ..................................................46 Shoe Covers............................................ 161 Slide Racks ............................................. 222 Slip-Joint Pliers ..........................................26 Snap Hook........................................ 230, 313 Snap Loop .............................................. 196 Snips ................................................. 46–47 Socket Wrenches ................................... 89–91 Sockets, Impact ................................. 276–277 Solar Panel ............................................. 183 Speaker, Wireless................................ 180–181 Specialty Testers................................. 271–273 Spud Wrenches........................................ 320 Star Dropper Hammer ................................ 318 Steel Strand (Haven’s™) Grips....................... 304 Step Drill Bits .......................................... 284 Storage Racks ................................... 222–223 Structural Tools.................................. 317–320 Suspenders............................................. 198 Powerline™ Series ................................. 206 Tradesman Pro™ ................................... 202 Swaging Punch ........................................ 123
Safety, PPE and Comfort
Radial Strippers........................................ 232 Ratcheting PVC Cutters ............................... 122 Ratcheting Tools ................................. 233–234 Modular Crimpers ............................ 233–234 Rebar Hickeys.......................................... 317 Receptacle Testers .................................... 266 Reciprocating Saw Blades ............................ 283 Replacement Parts Cable Skinning Blades ...............................56 Compass Saw Blades ................................62 Data Testers......................................... 247 Fish Tapes ........................................... 111 Hard Hats ........................................... 155 Katapult Blades .......................................34 Modular Crimpers............................ 233–234 Multimeter Fuses ................................... 261 Pliers Handles ........................................28 Saw Blades ...........................................62 Screwdriver Bits ......................................75 Test Leads........................................... 262 Utility Knife Blades ...................................55 Respirators ............................................. 159 Rope .................................................... 313 Round Bars............................................. 319
Page
Tool Kits
P Parallel Jaw Grips ............................... 305–306 Pipe & Tubing Tools PVC Cutters......................................... 122 Swaging Punch ..................................... 123 Tube Bender ........................................ 123 Tube Cutter.......................................... 123 Pliers ...................................................9–28 Bolt-Thread Holding .................................14 Combination ....................................15, 143 Conduit ..........................................28, 119 Crimping ................. 14–15, 23–24, 26, 47, 235 Diagonal-Cutting .......................... 17–21, 142 End-Cutting ...........................................28 Insulated ................................................. ........ 13–14, 18–19, 20, 23, 27, 32–33, 142–143 Ironworker’s ..........................................16 Lineman’s .................................. 12–16, 142 Long-Nose ................................. 22–26, 143 Multifunction .................................... 15, 24 Plastic-Cutting ........................................21 Pump ............................................27, 143 Replacement Handles ...............................28 Slip-Joint..............................................26 Wire Stripping ..................... 15, 18, 20, 23–24 Pocket Knives ....................................... 49–53 Multi-Blade............................................53 Pocket Thermometers ................................ 268 Pole Pick................................................ 230 Pole Sling............................................... 230 Poly Pull Line .......................................... 116 Pouches .............................. 187–195, 204–206 Power ............................................. 182–184 Chargers and Cables ............................... 184 PowerBox ........................................... 184 Power Stations ............................... 182–183 Solar Panel.......................................... 183 Power Drivers .......................................... 288
Power Tools Bits ............................................. 287–288 Powerline™ Series Suspenders ......................................... 206 Tool Belts............................................ 205 Tool Pouches ................................. 204, 206 Tool Pouch Sets .................................... 205 PPE ................................................ 150–168 Punchdown Tool Kits ................................. 245 Punchdown Tools ......................... 236–237, 245 Punches ................................................ 106 PVC Cutters ............................................ 122 PVC Tube Cutter ....................................... 122
Item
Conduit Tools and Measurement
O
Page
Drivers and Wrenches
Non-Contact High Voltage Tester.................... 274 Non-Contact Voltage Testers ................... 264–265 Nut Drivers .................................... 79–84, 147 Cushion-Grip .................................... 79–81 Hollow-Shaft...........................79–81, 83, 147 Insulated ............................................ 147 Multi-Bit ...............................................82 Plastic-Handle ........................................83
Item
Strippers, Cutters, and Crimpers
Item
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Alphabetical Item
Page
T Tackle ............................................. 315–316 Tape Dispenser ........................................ 240 Tape Measures ................................... 130–132 Fiberglass ........................................... 132 Holders .............................................. 131 Tape Thong............................................. 196 Tapping Tools ............................................84 Test Kits .......................................... 257, 260 Test Leads .............................................. 262 Test-n-Map™ Remote Kit ............................. 251 Testers ............................................ 271–273 Tether ................................................... 168 Thermal Imager ........................................ 271 Thermocouples ........................................ 261 Thermometers ................................... 268–269 Infrared........................................ 268–269 Pocket ............................................... 268 Tie Tensioning Tools ....................................47 Tie-Wire Reel........................................... 318 Tone & Probe PRO Kit ................................ 252 Tone and Probe Testers ............................... 251 Tone Generator ........................................ 252 Tool Aprons ...................................... 193, 199 Tool Backpacks .................................. 208–210 Tool Bags ......................................... 207–221 Accessories ......................................... 218 Canvas............................................... 215 Glove ................................................ 218 Leather .............................................. 217 Rolling............................................... 212 Tradesman Pro™ ................................... 207 Zipper Bags ................................... 219–221 Tool Belts ............................. 196–199, 201, 205 Powerline™ Series ................................. 205 Tool Cases........................................ 202–203 Tool Holders...................................... 194–195 Tool Kits ...............................133–138, 147-149 Coaxial............................................... 243 Insulated ...................................... 147–149 Multimeters ......................................... 260 Twisted Pair......................................... 244 Voice/Data/Video ............................. 242–245 Tool Pouches..................................... 187–193 Powerline™ Series ................................. 204 Powerline™ Series Sets ........................... 205 Tape Measures ..................................... 131 Tradesman Pro™ ............................. 199–200 Tradesman Pro™ Sets ............................. 199 Tool Storage...................................... 185–230 Torpedo Levels......................................... 128 Totes .................................................... 217 Tradesman Pro™ Cooler ............................................... 179 Kneeling Pads ...................................... 167
324
www.kleintools.com > 800-553-4676
Item
Page
Meter Cases ........................................ 274 Mobile Phone Holders ....................... 181, 203 Rolling Tool Bag .................................... 212 Suspenders ......................................... 202 Tool Bags............................................ 207 Tool Cases .......................................... 202 Tool Pouches ................................. 199–200 Tool Pouches Sets ................................. 199 Zipper Bags ......................................... 219 Tripod ................................................... 126 Tube Bender ............................................ 123 Tube Cutters............................................ 123 Tumbler ................................................. 179 Twisted Pair (RJ & CAT) Cable Boots ......................................... 238 Connectors .......................................... 238 Installation Kits............................... 244–245 Testers ......................................... 247–252 Tools ............................... 233–235, 238–239
U USB Testers ............................................ 273 Utility ........................................... 41, 43, 104 Cable Benders ........................................43 Cable Cutters .........................................41 Cable Strippers .......................................43 Staple Starter ....................................... 104 Utility Knives ........................................ 54–55 Blades .................................................55 Blade Dispenser ......................................55 Folding ................................................54 Utility LED Light ....................................... 281
V VDV Kits .......................................... 242–245 VDV Tester Remotes .................................. 251 Voice/Data/Video Tools .....................40, 231–252 Cable Cutters .........................................40 Prep ...................................... 232, 238–239 Staplers ............................................. 239 Termination ................................... 232–235 Test ............................................ 246–252 Voltage Testers .................................. 263, 266 Non-Contact .................................. 264–265
W Warming Gear ......................................... 160 Web Strap Ratchet Hoist ............................. 314 Wire Management Sleeves ........................... 241 Wire Marker Books.................................... 116 Wire Mesh Grips................................. 307–311 Wire Pulling ...................................... 114–116 Lubricants..................................... 115–116
Item
Page
Poly Pull Line ....................................... 116 Wire Pulling Grips ............................... 290–306 Chicago™ ..................................... 300–304 Cleaning Brush Set ................................ 306 Haven’s™............................................ 304 Parallel Jaw ................................... 305–306 Wire Spanner .......................................... 114 Wire Strippers ...................................... 30–35 Insulated ............................................ 144 Knives ............................................ 49–50 Multifunction .........................................35 Pliers ............................... 15, 18, 20, 23–25 Romex® ......................................31–32, 34 Work Wear ....................................... 160–161 Work@Height Tools Bolt Bags ............................................ 192 Bull Pins............................................. 319 Pliers ............................................. 18–19 Round Bars ......................................... 319 Tether ................................................ 168 Wrenches ........................................... 320 Worklights.............................................. 281 Wrenches ............................................ 85–95 Adjustable..............................86–87, 95, 320 Box ................................................ 92, 94 Can .....................................................94 Combination ..........................................88 Impact Sockets..................................... 277 Lineman .......................................... 93–94 Open-End .............................................87 Ratcheting ................................. 92–94, 320 Socket ............................................ 89–91 Spud .............................................95, 320 Strap ...................................................94 Wristband, Magnetic .................................. 180
Z Zip Ties ................................................. 241 Zipper Bags ...................................... 219–221
Pliers
Numerical Page
1
Page
Page
Page
19542 ............................... 66 19543 ............................... 66 19544 ............................... 66 19545 ............................... 66 19546 ............................... 66 19555 ............................... 66
2
Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
325
Jobsite Accessories
www.kleintools.com > 800-553-4676
Safety, PPE and Comfort
200028EINS ............ 18, 142, 147 200048EINS .................. 19, 142 20009NEEINS ................ 13, 142 2005N ............................... 36 2006................................. 37 2012..........................230, 313 201-7CST ........................... 16 2036EINS ..................... 23, 143 2037EINS ..................... 23, 143 2038EINS ..................... 23, 143 2100-5 .............................. 58 2100-7 .......................... 57-58 2100-8 .............58, 242, 244-245 2100-9 .............................. 58 21010 ............................... 57 21010-6-SEN................. 58, 245 21050 ............................... 43 21051 ............................... 43 21051B ............................. 43 21051C ............................. 43 2138NEEINS ................. 13, 142 213-9NE ............................ 13 2139NEEINS ........... 13, 142, 147 213-9ST ............................ 16 22000 ............................... 59 22001 ............................... 59 22002 ............................... 59 22003 ............................... 59 23008 ............................... 60 23010 ............................... 60 23011 ............................... 60 23015 ............................... 60 24000 ............................... 59 24001 ............................... 59 25450 ..............................306 258 .................................313 259 .................................313 26001 ............................... 59 267 .................................314 268 .................................314 27400 ..............................318 27450 ........................196, 318 29025 ..............................158 29026 ..............................126 29035 ..............................184 29201 ..............................184 29202 ..............................184 29209 ..............................184 29210 ..............................184 29250 ..............................183
Tool Kits
1628-50F .............. 295-296, 301 1628-50P ........ 259-297, 299, 301 1628-50R ........ 295-297, 299, 301 1628-50S ........ 295-297, 299, 301 1628-50T ........ 295-297, 299, 301 1628-50U ........ 295-297, 299, 301 1628-50W ....... 295-297, 299, 301 1628-50X .............. 295-297, 301 1628-50Y ........ 295-297, 299, 301 1628-50Z ........ 295-296, 299, 301 16477 ..............................305 16477-20 ..........................305 1656-20..........292, 294, 298, 300 1656-20H ........292, 294, 298, 300 1656-30..........292, 294, 298, 300 1656-30H ........292, 294, 298, 300 1656-40..........292, 294, 298, 300 1656-40H ........292, 294, 298, 300 1656-50..........292, 294, 298, 300 1656-50H ........292, 294, 298, 300 1656-60................292, 294, 300 1656-60H ..............292, 294, 300 1659-20......................292, 303 1659-30......................292, 303 1659-40......................292, 303 1659-50......................292, 303 1659-5AT ....................292, 304 1671-10......................292, 302 1672-10......................292, 302 1675-20............................306 1675-21............................306 1684-5 .......................292, 302 1684-5AT ....................292, 304 16845C ............................302 1684-5C ...........................292 16845CAT .........................304 1684-5F ......................292, 302 1684-5H .....................292, 302 1684-74......................292, 302 1684-74H ..........................302 1685-20......................292, 306 1685-31......................292, 306 1686-10......................292, 302 1686-20......................292, 302 1692-5 .......................292, 302 1692-5AT ....................292, 304 1702-20HH ........................314 1702-20N ..........................314 1716-60............................305 1716-70............................305 1716-71............................305 1802-30............................315 1802-30S ..........................315 1802-30SR ........................315 1802-30SSR ......................315 1803-60............................313 1804-60............................313 19352 ..............................120 19353 ..............................120
Item
Conduit Tools and Measurement
1550-44............................. 52 1550-6 .............................. 53 1570-3 .............................. 56 1570-3LR ........................... 56 1571INS ...........56, 144, 148-149 1580-3 .............................. 56 1604-10......................292, 304 1604-20......................292, 304 1604-20L ....................292, 304 1611-20......................292, 303 1611-30......................292, 303 1611-40......................292, 303 1611-50......................292, 303 1613-30......................292, 303 1613-35............................303 161335H ...........................303 1613-40......................292, 302 1613-40H ....................292, 302 1625-20......................292, 304 162520-1 ....................292, 304 162520-114 .......................304 162520-7/8 ..................292, 304 1628-16......................292, 302 1628-16AT...................292, 304 1628-16P ..........................292 162816PE .........................300 162816PF..........................300 1628-16PG ..................294, 300 1628-16PH ..................294, 300 1628-16PI .............294, 298, 300 1628-16PJ.............294, 298, 300 1628-16PK ............294, 298, 300 1628-16PL ............294, 298, 300 1628-16PM............294, 298, 300 1628-16PN ............294, 298, 300 1628-17......................292, 302 1628-18......................292, 302 1628-30............................292 1628-30N ..............294, 298, 301 1628-30O ........ 294-295, 298, 301 1628-30P ..............295, 299, 301 1628-30R ..............295, 299, 301 1628-30S ..............295, 299, 301 1628-30T ..............295, 299, 301 1628-30U ..............295, 299, 301 162830VRP .......................302 1628-40............................292 1628-40A ..............295, 299, 301 1628-40U ..............295, 299, 301 162840VRU .......................302 1628-40W .............295, 299, 301 1628-40X ..............295, 299, 301 1628-40Y ..............295, 299, 301 1628-40Z ..............295, 299, 301 1628-50............................292 1628-50A ........ 295-297, 299, 301 1628-50C .............. 295-296, 301 1628-50D ........ 295-297, 299, 301 1628-50E ........ 295-296, 299, 301
Item
Drivers and Wrenches
1000................................. 35 1001................................. 35 1004................................. 34 1005......................36, 134-135 1005-INS ............... 36, 144, 148 1006................................. 36 1009................................. 33 1010................................. 35 1011................................. 33 1011M .............................. 33 1016................................. 53 1019................................. 33 1104................................. 40 11045 ....................33, 135-138 11045-INS .........33, 144, 148-149 11046 ............................... 33 11047 ............................... 33 11048 ............................... 33 11049 ............................... 33 11049-INS .................... 33, 144 11053 ............................... 32 11054EINS ............. 32, 144, 147 11054GLW ......................... 32 11055 ..............32, 134, 136-138 11055GLW ......................... 32 11055-INS .............. 32, 144, 149 11057 ............................... 32 11061 ............................... 34 11063W............................. 34 11073 ............................... 34 11074 ............................... 34 11081 ............................... 34 1200L ............................... 46 1201R............................... 46 1202S ............................... 46 12098 ............................... 15 12098EINS ................... 15, 143 12098-INS .............. 15, 143, 148 1218BI .............................. 62 1218BI-P ........................... 62 1224BI .............................. 62 1224BI-P ........................... 62 1232BI .............................. 62 1232BI-P ........................... 62 13104 ............................... 75 13105 ............................... 75 13156 ......................... 74, 146 13157 ......................... 74, 146 13231 ............................... 75 13391 ............................... 75 13392 ............................... 75 1515-1 .............................. 57 1515-S .............................. 57 1550-11............................. 52 1550-2 .............................. 53 1550-24............................. 52 1550-4 .............................. 52
Item
Strippers, Cutters, and Crimpers
Item
Pliers Strippers, Cutters, and Crimpers
Item
Drivers and Wrenches
Numerical
3005CR ............................. 37 3146................................. 93 3146A ............................... 93 3146B ............................... 93 31716 ..............................283 31727 ..............................283 31728 ..............................283 31731 ..............................283 31734 ..............................283 31737 ......................... 61, 134 31739 ..............................283 31741 ..............................283 31751 ..............................283 31755 ..............................283 31761 ..............................283 31850 ..............................283 31852 ..............................283 31856 ..............................283 31860 ..............................283 31866 ..............................283 31868 ..............................283 31870 ..............................283 31872 ..............................283 31873 ..............................283 31874 ..............................283 31900 ..............................282 31902 ..............................282 31905 ..............................282 31906 ..............................282 31907 ..............................282 31914 ..............................282 31918 ..............................282 31922 ..............................282 31928 ..............................282 31932 ..............................282 31940 ..............................282 31944 ..............................282 31948 ..............................282 31958 ..............................282 31972 ..............................282 32008 ............................... 68 3210........................... 95, 320 3211........................... 95, 320 3212........................... 95, 320 3212TT........................ 95, 320 3213........................... 95, 320 3213TT........................ 95, 320 3214........................... 95, 320 3214TT........................ 95, 320 3219........................... 95, 320 3220........................... 95, 320 3221........................... 95, 320 32215 ............................... 69 32216 ............................... 69 32217 ..............................286
Page
29601 ..............................184
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Tool Kits
Conduit Tools and Measurement
3
326
Item
Page
3222........................... 95, 320 3223........................... 95, 320 32234 ..............................288 32235 ..............................288 32237 ..............................286 32238 ..............................286 32239 ..............................286 3224........................... 95, 320 32240 ..............................286 32241 ..............................286 32242 ..............................286 3227........................... 95, 320 32286 ......................... 74, 146 32287 ......................... 74, 146 32288 ......................... 74, 146 32293 ......................... 74, 146 32303 ............................... 71 32304 ............................... 71 32305 ............................... 71 32307 ............................... 71 32308 ............................... 71 3231........................... 95, 320 32314 ......................... 73, 134 3232........................... 95, 320 32327 ............................... 73 32328 ............................... 73 32378 ............................... 67 3238........................... 95, 320 3239........................... 95, 320 32392 ............................... 75 32394 ............................... 75 32395 ............................... 75 32396 ............................... 75 32397 ............................... 75 32398 ............................... 75 32399 ............................... 75 3240................................319 32400 ............................... 75 32401 ............................... 75 3241................................319 32410 ............................... 75 32411 ............................... 75 32412 ............................... 75 3242................................319 3243................................319 3244................................319 3245................................319 3246................................319 3246TT.............................319 3247................................319 32476 ............................... 70 32477 ............................... 70 32478 ............................... 75 32479 ............................... 75 3248................................319 32482 ............................... 75 32483 ............................... 75 32484 ............................... 75 32485 ............................... 75
www.kleintools.com > 800-553-4676
Item
Page
32500 ............................... 70 32500MAG ......................... 70 32510 ............................... 74 32517 ............................... 84 32518 ............................... 84 32525 ............................... 74 32526 ............................... 74 32527 ............................... 70 32528 ............................... 75 32534 ............................... 72 32535 ............................... 72 32536 ............................... 72 32537 ............................... 72 32538 ............................... 72 32539 ............................... 72 32540 ............................... 75 32541 ............................... 75 32542 ............................... 75 32543 ............................... 75 32544 ............................... 75 32545 ............................... 75 32546 ............................... 75 32547 ............................... 75 32548 ............................... 75 32549 ............................... 75 3255................................319 32550 ............................... 75 32551 ............................... 75 32552 ............................... 75 32553 ............................... 75 32554 ............................... 75 32557 ............................... 70 32559 ............................... 70 3255TT.............................319 3256................................319 32560 ............................... 70 32561 ......................... 70, 134 32562 ............................... 70 3256TT.............................319 32581 ............................... 73 32585 ............................... 73 3259................................319 32593 ............................... 71 32594 ............................... 71 32596 ............................... 74 3259TT.............................319 3260................................319 3261................................319 32613 ............................... 73 32614 ............................... 73 32618 ............................... 71 32619 ............................... 71 3262................................319 3263................................319 3265................................319 32708 ............................... 71 32709 ............................... 71 32713 ............................... 71 32715 ............................... 71
Item
Page
32717 ............................... 72 32751 ............................... 71 32752 ............................... 75 32759 ..............................288 32766 ......................... 79, 287 32767 ......................... 79, 287 32768 ......................... 79, 287 32770 ............................... 75 32771 ............................... 75 32772 ............................... 75 32773 ............................... 75 32774 ............................... 75 32775 ............................... 75 32776 ............................... 75 32777 ............................... 75 32778 ............................... 75 32779 ............................... 75 32780 ............................... 75 32781 ............................... 75 32782 ............................... 75 32783 ............................... 75 32784 ............................... 75 32791 ..............................287 32792 ..............................287 32793 ..............................287 32794 ..............................287 32795 ..............................287 32796 ..............................287 32797 ..............................287 32798 ..............................287 32799 ..............................287 32800 ............................... 82 32801 ............................... 82 32807MAG ......................... 82 32900 ......................... 79, 287 32905 ..............................282 32907 ......................... 79, 287 33524 ......................... 81, 147 33525 ..............................149 33525SC ...........................148 33526 ..............................149 33527 ..............................148 33528 ......................... 67, 146 33529 ..............................149 33532-INS .................... 67, 146 33535 ..............................149 33535SC ...........................148 33536 ..............................149 33537 ..............................148
4 40002 ..............................165 40003 ..............................166 40004 ..............................166 40006 ..............................166 40007 ..............................166 40008 ..............................166 40010 ..............................166
Pliers
Numerical Page
Page
Page
5
Page
Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
327
Jobsite Accessories
www.kleintools.com > 800-553-4676
Safety, PPE and Comfort
5104VT ............................226 5105-20............................215 5105-24............................215 5106................................226 5106P ..............................226 5106S ..............................226 5107-6 .............................194 5107-9 .............................194 5108-18............................217 5108-20............................217 5108-24............................217 5109................................225 5109CSV...........................225 5109P ..............................225 5109PS ............................225 5109S ..............................225 5109SLR...........................225 5109SV ............................225 51100 ..............................115 5110-48............................229 5111................................189 5112................................194 5113................................226 5113S ..............................226 5114DSC ..........................225 5114DSC22 .......................225 5115................................217 5118C ..............................194 5118P4 ............................188 5118P5 ............................188 5118PRS ..........................194 5118R ..............................194 5118RT ............................194 5118S ..............................194 5119..........................138, 188 5121-15............................218 5121-19............................218 5122-16............................218 5122-18............................218 5124-15............................218 5124-17............................218 5124-19............................218 5125................................188 5125L ..............................188 5126................................188 5127................................188 5127T ..............................188 5129................................194 5130................................196 5136................................220 5139.................... 134-135, 221 5139B ..............................221 5139C ..............................221 5139L ..............................221 5139PAD ..........................221 5140................................220 5140K ..............................190 5141................................220 5141P ..............................191
Tool Kits
500-18 .............................. 86 500-24 .............................. 86 50031 ..............................122 5003-18............................216 50032 ..............................122 5003-20............................216 50033 ..............................122 50034 ..............................122 50035 ..............................122 50210EINS ................... 27, 143 502-10-EINS ......................143 50350 ..............................111 50351 ..............................111 50400 ............................... 43 50402 ............................... 43 50506SEN .........................122 50549 ..............................122 50550 ..............................110 50611 ..............................115 50611ML ..........................115 506-15 .............................. 86 507-10 .............................. 86 507-12 .............................. 86 507-6................................ 86 507-8................................ 86 5100M .............................194 5101................................194 51010 ..............................116 51012 ..............................116 51013 ..............................116 51015 ..............................116 51017 ..............................116 51018 ..............................116 5102-12............................215 510212BLK ........................215 5102-14............................215 5102-14SP ........................215 5102-16............................215 5102-16SP ........................215 5102-16SPBLK ...................215 5102-18............................215 5102-18SP ........................215 5102-18SPBLK ...................215 5102-20............................215 5102-22............................215 5102-24............................215 5102-24SP ........................215 51028 ..............................115 5102S ..............................218 5103S ..............................226 5104................................225 5104CLR17........................225 5104CLR22........................225 5104CLRFR .......................225 5104FR ............................225 5104OCTO .........................225 5104S ..............................225
Item
Conduit Tools and Measurement
44005R ............................. 51 44005RC............................ 51 44006 ............................... 50 44007 ............................... 50 44032 ............................... 52 44033 ............................... 52 44034 ............................... 52 44036 ............................... 52 44037 ............................... 52 44052BLK .......................... 51 44101 ............................... 55 44103 ............................... 55 44130 ............................... 54 44131 ....................54, 134-135 44133 ............................... 55 44135 ............................... 54 44136 ............................... 55 44138 ............................... 56 44142 ............................... 51 44151 ............................... 60 44200 ............................... 57 44201 ............................... 50 44213 ............................... 49 44217 ............................... 50 44218 ............................... 56 44219 ............................... 56 44220 ............................... 50 44222 ............................... 50 44223 ............................... 49 44228 ............................... 49 443A ...............................313 450-001............................239 450-002............................239 450-003............................239 450-100............................239 450-200............................241 450-210............................241 450-320............................241 450-330............................241 450-400............................240 450-410............................240 450-600............................241 450-700............................240 450-900............................240 450-950............................240 450-960............................240 450-999............................240 45200 ..............................168 45201 ..............................168 455 .................................313 46037 ............................... 57 46039 ............................... 57 470 .................................313 48036 ............................... 60 48502 ..............................313 4BPSET5...........................106 4PPLSET8 .........................106
Item
Drivers and Wrenches
40012 ..............................166 40014 ..............................166 40015 ..............................166 40016 ..............................166 40017 ..............................166 40018 ..............................166 40021 ..............................166 40022 ..............................166 40023 ..............................166 40072 ..............................165 40074 ..............................165 40080 ..............................166 40082 ..............................166 40084 ..............................166 40086 ..............................166 40205 ..............................163 40206 ..............................163 40207 ..............................163 40208 ..............................164 40209 ..............................164 40210 ..............................164 40211 ..............................165 40212 ..............................165 40213 ..............................165 40214 ..............................164 40215 ..............................164 40216 ..............................164 40217 ..............................164 40218 ..............................164 40219 ..............................164 40220 ..............................163 40221 ..............................163 40222 ..............................163 40226 ..............................163 40227 ..............................163 40228 ..............................163 40229 ..............................164 40230 ..............................164 40231 ..............................164 40232 ..............................163 40233 ..............................163 40234 ..............................163 42200 ..............................193 42201 ..............................193 42241 ..............................189 42242 ..............................193 42244 ..............................193 42245 ........................189, 193 42246 ........................189, 193 42247 ..............................190 44000 ............................... 50 44000-BLK ......................... 51 44001 ............................... 50 44001-BLK ......................... 51 44002 ............................... 51 44003 ............................... 51 44004 ............................... 51 44005 ............................... 51 44005C ............................. 51
Item
Strippers, Cutters, and Crimpers
Item
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Numerical Item
Page
5142................................191 51425 ..............................168 51427 ..............................119 51428 ..............................119 51429 ..............................119 5142P ..............................191 5143................................229 5144................................227 5144B ..............................227 5144BHB ..........................227 5144BHB14OS ....................227 5144BHHB.........................227 5144H..............................230 5144HBS ..........................227 5144S ..............................227 5145................................188 5146................................190 5151................................217 5152S ..............................227 5155................................216 5156................................216 51603 ..............................118 51604 ..............................118 51605 ..............................118 51606 ..............................118 51607 ..............................118 51608 ..............................118 51609 ..............................118 51610 ..............................118 51611 ..............................118 51612 ..............................118 51613 ..............................118 5162T ..............................187 5163................................194 5164..........................136, 187 5164T ..............................187 5165..........................136, 187 5166..........................137, 187 5167................................187 5171PS ............................226 5172PS ............................226 5178................................187 5179................................191 5179S ..............................191 5180................................228 5181ORA ..........................228 51828 ..............................230 51829 ..............................230 51829M ............................230 51829MHS ........................230 5182BLA ...........................228 5183................................200 5184..........................202, 274 5185................................194 5185BLK ...........................228 5185ORA ..........................228 5187........................... 57, 194 5187T ..............................194 5188................................194
328
Item
Page
5188T ..............................194 5189..........................202, 274 5190................................187 5195....................131, 193, 195 5195TT.............................131 5196..........................131, 195 51A .................................190 51TOP..............................226 5200-15............................216 5201................................197 5202L ..............................197 5202M .............................197 5202XL ............................197 5204..........................138, 197 5207L ..............................196 5207M .............................196 5207XL ............................196 5216V ..............................228 5225.............. 136-137, 193, 197 5236................................220 5240................................200 5241................................200 5242................................200 5243................................200 5244................................199 5248................................202 5300................................137 53000 ..............................286 53001 ..............................286 53002 ..............................286 53100 ..............................286 53101 ..............................286 53102 ..............................286 53103 ..............................286 53104 ..............................286 53105 ..............................286 53106 ..............................286 53107 ..............................286 53108 ..............................286 53109 ..............................286 53110 ..............................286 53111 ..............................286 53112 ..............................286 53113 ..............................286 53114 ..............................286 53115 ..............................286 53116 ..............................286 53117 ..............................286 53118 ..............................286 53119 ..............................286 53120 ..............................286 53121 ..............................286 53122 ..............................286 53123 ..............................286 53124 ..............................286 53125 ..............................286 53126 ..............................286 53127 ..............................286 53128 ..............................286
www.kleintools.com > 800-553-4676
Item
Page
5336................................220 53402 ..............................284 53404 ..............................284 53406 ..............................284 53408 ..............................284 53715SEN .........................285 53716 ..............................285 53717 ..............................285 53718 ..............................285 53719 ..............................285 53720 ..............................285 53721 ..............................285 53722 ..............................285 53723 ..............................285 53725 ..............................119 53726-SEN ........................119 53727SEN .........................121 53728SEN .........................121 53729 ..............................288 53731 ..............................283 53732SEN .........................121 53751 ..............................285 53819 ..............................121 53820 ..............................121 53827 ..............................121 53828 ..............................121 53837 ..............................121 53838 ..............................121 53849 ..............................121 53850 ..............................121 53857 ..............................121 53858 ..............................121 53867 ..............................121 53868 ..............................121 53871 ..............................121 53872 ..............................121 53873 ..............................121 5415................................197 5415L ..............................197 5415S ..............................197 5415XL ............................197 5416................................192 5416L ..............................192 5416OCTO .........................192 5416T ..............................192 5416TBR...........................192 5416TC ............................192 5416TCP ...........................192 5416TFR ...........................192 5416TSR...........................192 5417................................195 5417T ..............................195 5420..........................197, 318 5420L ........................197, 318 5420S ........................197, 318 5420XL ......................197, 318 5425M .............................198 5425XL ............................198 5426L ..............................198
Item
Page
5426M .............................198 5426XL ............................198 54436 ..............................223 54437 ..............................223 54438 ..............................223 54439 ..............................223 54440 ..............................223 54445 ..............................223 54446 ..............................223 54447 ..............................223 54448 ..............................223 54451 ..............................223 54474 ..............................222 54476 ..............................222 54477 ..............................222 54484 ..............................222 54486 ..............................222 5456................................195 5456T ..............................195 5456TS ............................195 5458................................196 5459C ........................196, 318 5459SLVR ...................196, 318 5459T ..............................195 5460................................195 5461T ..............................195 5471..........................191, 229 5471FR ......................191, 229 5481................................189 5482................................189 5539BLU...........................220 5539CPAK .........................220 5539LBLU .........................220 5539LCPAK .......................220 5539LNAT .........................220 5539LRED .........................220 5539LYEL ..........................220 5539NAT ...........................220 5539RED ..........................220 5539YEL ...........................220 55400 ..............................202 554158-14.........................213 5541610-14 .......................213 55419SP-14 .......................200 55421BP-14 ........... 134-135, 210 55421BP14CAMO ................210 55427 ..............................199 55428 ..............................199 55429 ..............................199 55431 ..............................211 55437 ..............................178 55439BPTB........................210 55448 ..............................213 55452RTB .........................212 55455M ............................211 55456BPL .........................210 55460 ........................181, 203 55461 ........................181, 203 55468 ........................181, 203
Pliers
Numerical Page
Page
Page
Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
329
Tool Storage
www.kleintools.com > 800-553-4676
Jobsite Accessories
60163 ..............................158 60164 ..............................158 601-6-INS .........................149 60171 ..............................158 60172 ..............................158 60173 ..............................158 60174 ..............................158 60176 ..............................159 60177 ..............................159 601-7-INS .............. 67, 146, 148 601-8................................ 67 60180 ..............................161 60181 ..............................161 60184 ..............................167 60185 ..............................162 60186 ..............................162 60188 ..............................165 60189 ..............................165 60197 ..............................162 60198 ..............................162 602-10 .............................. 67 60210B ............................198 602-12 .............................. 67 602-3................................ 67 60230 ..............................161 602-4................................ 67 60244 ..............................159 60245 ..............................159 60246 ..............................159 60248 ..............................152 60249 ..............................152 602-4DD ............................ 68 602-4-INS .........67, 146, 148-149 602-6................ 67, 69, 134-135 60262 ..............................152 60268 ..............................160 60269 ..............................160 602-7DD ............................ 68 602-7-INS .........67, 146, 148-149 602-8................................ 67 602-8-INS .........67, 146, 148-149 603-1................................ 67 603-10 .............................. 67 603-3...............67, 134, 136-138 603-4.......... 67, 69, 135, 137-138 60344 ..............................167 60345 ..............................153 60346 ..............................153 60347 ..............................153 603-4B .................. 69, 134, 136 6034DD ............................. 68 603-4-INS .........67, 146, 148-149 603-6................................ 67 60364 ..............................160 603-7................................ 67 6037INS ...................... 67, 146 60380 ..............................160 60383 ..............................160 60388 ..............................160
Safety, PPE and Comfort
6 60.................................... 28 600-1................................ 67 600-12 .............................. 67 600-4......................67, 69, 134 60053 ..............................136 60056 ..............................136 600-6................................ 67 600-8................................ 67 60090 ..............................161 60093 ..............................161 60100 ..............................152 60105 ..............................152 60107 ..............................152 60107RL ...........................152 601-10 .............................. 67 60113RL ...........................152 601-3.......................... 67, 134 60132 ..............................160 60135 ..............................167 60136 ..............................167 601-4................................ 67 60145 ..............................154 60146 ..............................154 60147 ..............................154 60148 ..............................154 60149 ..............................154 601-4-INS .............. 67, 146, 148 60150 ..............................154 60155 ..............................158 60156 ..............................157 60159 .................. 134-135, 158 601-6.....67, 69, 134-135, 137-138 60160 ..............................158 60161 ..............................158 60162 ..............................158
Page
Tool Kits
5713................................206 5714................................206 5715................................206 5716................................206 5717................................206 5718................................204 5719..........................137, 204 5720.......................... 137-138 5766................................204 58000 ..............................168 58001 ..............................168 58002 ..............................168 58003 ..............................168 58886 ..............................217 58888 ..............................217 58889 ..............................218 58890 ..............................217 5FW07538 .........................318 5FW10025 .........................318 5FW17550 .........................318 5SDSH .............................318
Item
Conduit Tools and Measurement
56254 ..............................116 56255 ..............................116 56312 ..............................113 56324 ..............................113 56325 ..............................113 56331 ........................110, 134 56333 ..............................110 56334 ..............................110 56335 ..............................110 56341 ..............................110 56350 ..............................110 56351 ..............................110 56380 ..............................109 56382 ..............................109 56383 ..............................109 56400 ..............................112 56401 ..............................113 56402 ..............................174 56403 ..............................171 56406 ..............................113 56409 ..............................113 56411 ..............................172 56412 ..............................173 56413 ..............................173 56414 ........................157, 177 56415 ..............................113 56418 ..............................113 56430 ..............................113 56511 ..............................113 56512 ..............................113 56513 ..............................113 56514 ..............................113 56515 ..............................113 56516 ..............................113 56517 ..............................113 56999 ......................... 94, 119 5700................................204 57000 ............................... 90 57005 ............................... 90 5701................................204 57010 ............................... 90 5702................................204 5703................................204 57032 ............................... 78 5704L ..............................205 5704M .............................205 5704XL ............................205 5705.................... 136-138, 205 5706................................206 57060 ............................... 78 5707..........................131, 206 5708................................206 5709L ..............................205 5709M .............................205 5709XL ............................205 5710L ..............................205 5710M .............................205 5710XL ............................205 5712..........................131, 206
Item
Drivers and Wrenches
55469 ..............................211 55470 ..............................219 55473RTB .........................212 55474 ........................181, 203 55475 ..............................210 55482 ..............................209 55485 ..............................208 55487 ..............................161 55488 ..............................161 55489 ..............................161 55560 ..............................219 55563 ........................181, 203 55564 ........................181, 203 55580 ..............................179 55597 ..............................210 55598 ..............................211 55599 ..............................219 55600 ..............................179 55601 ..............................179 55655 ..............................209 55895 ..............................180 55912 ..............................201 55913 ..............................201 55914 ..............................201 55917 ..............................201 55918 ..............................201 55919 ..............................201 55920 ..............................201 55921 ..............................201 56002 ..............................110 56014 ..............................110 56025 ..............................111 56026 ..............................172 56027 ..............................174 56028 ..............................171 56040 ..............................171 56048 ..................153, 156, 175 56049 ..................134, 156, 176 56056 ..............................109 56059 ..............................109 5606................................230 56060 ........................157, 178 56062 ........................156, 177 56063 ..............................157 56064 ..............................175 56108 ..............................116 56110 ..............................116 56115 ..............................111 56116 ..............................111 56117 ..............................116 56119 ..............................113 56120 ..............................111 56211 ..............................118 56220 ..............................176 56221 ..............................178 56250 ..............................116 56251 ..............................116 56252 ..............................116 56253 ..............................116
Item
Strippers, Cutters, and Crimpers
Item
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Numerical Item
Page
60389 ..............................162 60390 ..............................162 60391 ..............................160 60400 ..............................152 60401 ..............................152 60406RL...........................152 60407 ..............................152 60407RL...........................152 60413 ..............................160 604-3................................ 66 60439 ..............................161 60442 ..............................159 60443 ..............................159 60455 ..............................160 60465 ..............................161 60466 ..............................160 60470 ..............................158 60471 ..............................158 60486 ..............................161 60489 ..............................152 60490 ..............................158 60501 ..............................160 60508 ..............................161 60509 ..............................161 605-10 .............................. 67 60535 ..............................152 605-4.....................67, 135-138 605-4B .............................. 69 605-6.......... 67, 69, 134, 136-137 605-6B .............................. 69 605-7-INS .................... 67, 146 605-8................................ 67 606-2................................ 66 607-3................................ 66 607-3-INS .................... 66, 146 607-4................................ 66 608-10 .............................. 66 608-3................................ 66 608-4................................ 66 608-6................................ 66 608-8................................ 66 610 .................................. 81 610-1/4 ............................. 81 610-1/4M ........................... 80 610-5/16............................ 81 610-5/16M ......................... 80 610M ................................ 80 612-4................................ 69 612-4-INS .............. 67, 146, 148 613-3................................ 73 614-2................................ 73 614-3................................ 73 614-4................................ 73 614-6................................ 73 618-1/4M ........................... 80 618-5/16M ......................... 80 625-24 .............................. 84 625-32 .............................. 84 626 .................................. 84
330
Item
Page
626-24 .............................. 84 626-32 .............................. 84 627-20 .............................. 84 628-20 .............................. 84 630-1/2 ..................81, 134-135 630-1/2M ........................... 80 630-1/4 ..................81, 134-137 630-1/4M ........................... 80 630-10MM ......................... 81 630-11/32 ...............81, 134-135 630-11/32M ........................ 80 630-11MM ......................... 81 63016 ............................... 40 63020 ....................40, 242-243 630-3/16 .................81, 134-135 630-3/16M ......................... 80 630-3/8 ..................81, 134-135 630-3/8M ........................... 80 63030 ............................... 40 63035 ............................... 41 63035SC ............................ 41 630-4.5MM......................... 81 63041 ............................... 41 63041TH ............................ 41 63045 ............................... 41 63047 ............................... 41 630-4MM ........................... 81 630-5/16 .................81, 134-137 630-5/16M ......................... 80 630-5/8 ............................. 81 63050 ............................... 39 63050-EINS .................. 39, 144 63050-INS .........39, 144, 148-149 630-5MM ........................... 81 63060 ............................... 42 630-6MM ........................... 81 630-7/16 .................81, 134-135 630-7/16M ......................... 80 630-7MM ........................... 81 630-8MM ........................... 81 630-9/16 ............................ 81 630-9MM ........................... 81 630M................................ 80 631 .................................. 81 63118 ............................... 44 63124 ............................... 44 63130 ............................... 44 63136 ............................... 44 631M ................................ 80 63215 ............................... 39 63225 ......................... 39, 134 633 .................................. 81 63314 ............................... 44 63318 ............................... 44 63324 ............................... 44 63330 ............................... 44 63336 ............................... 44 63342 ............................... 44 6334INS ...........67, 146, 148-149
www.kleintools.com > 800-553-4676
Item
Page
633-4-INS .........................148 6337INS ...........67, 146, 148-149 633-7-INS .........................148 635-1/2 ............................. 79 635-1/4 ............................. 79 635-3/8 ............................. 79 635-4................................ 79 635-5/16 ............................ 79 635-6................................ 79 635-7/16 ............................ 79 635-9/16 ............................ 79 63601 ............................... 42 63607 ............................... 42 63700 ............................... 43 63711 ............................... 42 63750 ............................... 42 63800ACSR ........................ 42 64306 ..............................317 64309 ..............................317 64310 ..............................317 64311 ..............................317 64312 ..............................317 646-1/2 ............................. 81 646-1/2-INS .................. 81, 147 646-1/2M ........................... 80 646-1/4 ............................. 81 646-1/4-INS .................. 81, 147 646-1/4M ........................... 80 646-11/32 .......................... 81 646-11/32-INS ............... 81, 147 646-11/32M ........................ 80 646-3/16 ............................ 81 646-3/16-INS ................ 81, 147 646-3/16M ......................... 80 646-3/8 ............................. 81 646-3/8-INS .................. 81, 147 646-3/8M ........................... 80 646-5/16 ............................ 81 646-5/16-INS ................ 81, 147 646-5/16M ......................... 80 646-5/8 ............................. 81 646-5/8-INS .................. 81, 147 646-7/16............................ 81 646-7/16-INS ................ 81, 147 646-7/16M ......................... 80 646-9/16 ............................ 81 646-9/16-INS ................ 81, 147 646M ................................ 80 647 .................................. 81 647M ................................ 80 650 ............................ 84, 134 65064 ............................... 82 650DD .............................. 84 65129 ............................... 74 65131 ............................... 74 65160 ............................... 81 65200 ............................... 89 65500 ............................... 91 65502 ............................... 91
Item
Page
65504 ............................... 91 65506 ............................... 91 65508 ............................... 91 65510 ............................... 91 65512 ............................... 91 65514 ............................... 91 65600 ............................... 89 65601 ............................... 89 65602 ............................... 89 65603 ............................... 89 65604 ............................... 89 65605 ............................... 89 65606 ............................... 89 65607 ............................... 89 65608 ............................... 89 65610 ............................... 89 65611 ............................... 89 65613 ............................... 89 65614 ............................... 89 65620 ............................... 90 65621 ............................... 90 65622 ............................... 90 65623 ............................... 90 65700 ............................... 89 65701 ............................... 89 65702 ............................... 89 65703 ............................... 89 65704 ............................... 89 65705 ............................... 89 65706 ............................... 89 65707 ............................... 89 65708 ............................... 89 65711 ............................... 89 65712 ............................... 89 65713 ............................... 89 65714 ............................... 89 65715 ............................... 89 65716 ............................... 89 65717 ............................... 89 65720 ............................... 90 65721 ............................... 90 65722 ............................... 90 65723 ............................... 90 65724 ............................... 90 65800 ............................... 89 65801 ............................... 89 65802 ............................... 89 65804 ............................... 89 65805 ............................... 89 65806 ............................... 89 65807 ............................... 89 65808 ............................... 89 65809 ............................... 89 65810 ............................... 89 65811 ............................... 89 65812 ............................... 89 65820 ............................... 90 65821 ............................... 90 65823 ............................... 90
Pliers
Numerical Page
Page
Page
Page
69401 ..............................274 69406 ........................203, 274 69407 ........................203, 274 69408 ........................203, 274 69409 ..............................262 69410 ..............................262 69411 ..............................267 69417 ..............................262 69435 ..............................261 69445 ..............................262 6944INS ...................... 68, 145 6946INS ...................... 68, 145 6956INS ...................... 68, 145 6984INS ...................... 68, 145 6986INS ...................... 68, 145
7
Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
331
Tool Storage
www.kleintools.com > 800-553-4676
Jobsite Accessories
8 80006 ..............................138 80014 ..............................136 80028 ..............................135 80118 ..............................136 80141 ..............................134 807-18 .............................102
Safety, PPE and Comfort
70.................................... 28 702-12 .............................. 62 70220 ............................... 78 70550 ....................99, 134-135 70571 ............................... 99 70572 ............................... 99 70573 ............................... 99 70574 ............................... 99 70575 ............................... 99 70579 ............................... 99 70580 ............................... 99 70581 ............................... 99 70582 ............................... 99 70586 ............................... 99 70591 ............................... 99 71980 ............................... 25 72192 ............................... 20 725 .................................. 61 7314................................. 67 7324................................. 67 7FW27050 .........................318 7FWSS10025 .....................318 7HBRFRH04 .......................103 7HBRFRH07 .......................103 7HBRFRH10 .......................103 7HBRFRH14 .......................103 7WRP13 ...........................106 7WRP16 ...........................106 7WRP19 ...........................106 7WRP22 ...........................106 7WRP25 ...........................106 7WRP32 ...........................106
Tool Kits
68416 ............................... 88 68417 ............................... 88 68418 ............................... 88 68419 ............................... 88 68420 ............................... 88 68421 ............................... 88 68422 ............................... 88 68423 ............................... 88 68424 ............................... 88 68425 ............................... 88 68450 ............................... 87 68452 ............................... 87 68460 ............................... 87 68461 ............................... 87 68462 ............................... 87 68463 ............................... 87 68464 ............................... 87 68465 ............................... 87 68466 ............................... 87 68500 ............................... 88 68502 ............................... 88 68507 ............................... 88 68508 ............................... 88 68509 ............................... 88 68510 ............................... 88 68511 ............................... 88 68512 ............................... 88 68513 ............................... 88 68514 ............................... 88 68515 ............................... 88 68517 ............................... 88 68519 ............................... 88 69028 ..............................261 69031 ..............................261 69032 ..............................261 69033 ..............................261 69034 ..............................261 69035 ..............................261 69105 ..............................267 69127 ..............................266 69131 ..............................266 69133 ..............................266 69140 ..............................261 69142 ..............................261 69144 ..............................261 69146 ..............................261 69149P ............................260 6916INS ...................... 68, 145 69194 ..............................261 6924INS ................ 68, 145, 147 6926INS ...................... 68, 145 69345 ..............................126 69346 ..............................129 69347 ..............................129 6934INS ................ 68, 145, 147 69355 ..............................260 69367 ..............................262 6936INS ...................... 68, 145 69381 ..............................262
Item
Conduit Tools and Measurement
662-4-INS .................... 66, 146 662-7-INS .................... 66, 146 663 .................................. 66 66310 ..............................106 66311 ..............................106 66312 ..............................106 66313 ..............................106 66320 ..............................106 66321 ..............................106 66322 ..............................106 66323 ..............................106 66324 ..............................106 66325 ..............................106 66340 ..............................106 66342 ..............................106 66343 ..............................106 66344 ..............................106 66385 ............................... 84 66400 ..............................123 665 .................................. 66 666 .................................. 66 667 .................................. 66 668 .................................. 66 670-3................................ 68 670-6...................... 68-69, 136 67100 ............................... 68 67101 ............................... 75 671-6................................ 68 68005 ......................... 94, 235 68200 ............................... 92 68201 ............................... 92 68202 ............................... 92 68203 ............................... 92 68204 ............................... 92 68205 ............................... 92 68206 ............................... 92 68221 ............................... 92 68222 ............................... 92 68234 ............................... 92 68236 ............................... 92 68238 ............................... 92 68240 ............................... 92 68242 ............................... 92 68244 ............................... 92 68245 ............................... 92 682-6................................ 68 68309 ............................... 92 68310 ............................... 92 6840................................. 88 68400 ............................... 88 68402 ............................... 88 68404 ............................... 88 68406 ............................... 88 68410 ............................... 88 68411 ............................... 88 68412 ............................... 88 68413 ............................... 88 68414 ............................... 88 68415 ............................... 88
Item
Drivers and Wrenches
65825 ............................... 89 65826 ............................... 89 65827 ............................... 89 65828 ............................... 89 65829 ............................... 89 65830 ............................... 89 65831 ............................... 89 65907 ............................... 89 65908 ............................... 89 65909 ............................... 89 65910 ............................... 89 65911 ............................... 89 65912 ............................... 89 65913 ............................... 89 65914 ............................... 89 65915 ............................... 89 65916 ............................... 89 65917 ............................... 89 65918 ............................... 89 65919 ............................... 89 660 .................................. 66 66001 ..............................277 66004 ..............................277 66010 ..............................277 66011 ..............................277 66012 ..............................277 66014 ..............................277 66015 ..............................277 66016 ..............................277 66030 ..............................276 66031 ..............................276 66040 ..............................277 66041 ..............................277 66050E.............................277 66051E.............................277 66052E.............................277 66053E.............................277 66054E.............................277 66060 ..............................277 66061 ..............................277 66062 ..............................277 66064 ..............................277 66065 ..............................277 66066 ..............................277 661 .................................. 66 66100 ..............................105 66140 ..............................105 66141KIT ..........................230 66142 ..............................105 66143 ..............................105 66144 ..............................105 66145 ..............................105 66146 ..............................105 661-4-INS .................... 66, 146 66174 ..............................105 66177 ..............................105 661-7-INS .................... 66, 146 66183 ..............................105 662 .......................66, 134-137
Item
Strippers, Cutters, and Crimpers
Item
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Numerical Item
Page
808-16 .............................102 809-36 .............................103 809-36MF .........................103 811-16 .............................103 811-32 .............................103 819-03 .............................103 819-04 .............................103 832-26 .............................102 832-32 .............................102 85071 ............................... 67 85072 ............................... 67 85074 ............................... 67 85075 ............................... 67 85076 ............................... 67 85077 ............................... 69 85078 ............................... 67 85091 ........................120, 134 85105 ............................... 67 85191 ........................120, 135 85442 ............................... 67 85484 ............................... 66 85613 ............................... 73 85614 ............................... 73 85664 ............................... 66 85742 ............................... 67 86125 ..............................131 86216 ..............................131 86520 ............................... 46 86522 ............................... 47 86524 ............................... 47 86526 ............................... 46 86528 ............................... 46 86530 ............................... 47 86532 ............................... 47 86534 ............................... 47 86570 ............................... 47 86571 ............................... 47 86600 ..............................287 86601 ..............................287 8660110 ...........................287 86602 ..............................287 86939 ............................... 92 87904 ..............................198 87906 ..............................198 88904 ..............................123 88906 ..............................119 88907 ..............................119 88908 ..............................119 88910 ..............................123 88912 ..............................122 89.................................... 28 89030 ..............................123 89552 ............................... 47 89554 ............................... 48 89556 ............................... 47 89565 ............................... 48
332
Item
Page
9 900-6...............................132 901-6...............................132 905-6...............................132 910-6...............................132 911-6...............................132 9125.................... 131, 135-137 92003 ..............................137 9215................................131 9216................................131 9225....................131, 134, 136 9230................................131 92906 ..............................138 92911 ..............................138 92914 ..............................137 931-9RETT ........................128 935 .................................128 935AB1V...........................127 935AB4V.....................127, 134 935DAG ............................129 935DAGL ..........................129 935L................................128 935R ...................128, 135, 137 935RB..............................128 935RBLT ...........................128 9375..........................131, 137 93LCLG ............................125 93LCLS ............................125 93LDM65 ..........................132 93PLL ..............................126 94130 ..............................147 946-100............................132 946-150............................132 946-50 .............................132 98554 ........................ 244-245
A A000 ................................ 76 A116-2 .............................. 76 A116-3 .............................. 76 A130-2 .............................. 76 A130-3 .............................. 76 A131-2 .............................. 76 A216-4 .............................. 76 A216-6 .............................. 76 A316-8 .............................. 76 AEPJS1 ............................181 AEPJS2 ............................181 AEPJS3 ............................180 AESEB1 ............................180
B BAT20-12T165 ....................281 BAT20-12T1651 ..................281 BAT20-716 ........................278 BAT20-7161 .......................278
www.kleintools.com > 800-553-4676
Item
Page
BAT20-7T ..........................280 BAT20-7T1 ........................280 BAT20-7T10 .......................280 BAT20-7T11 .......................280 BAT20-7T12 .......................280 BAT20-7T13 .......................280 BAT20-7T134H....................280 BAT20-7T14 .......................280 BAT20-7T144H....................280 BAT20-7T14H .....................280 BAT20-7T16 .......................280 BAT20-7T17 .......................280 BAT20-7T18 .......................280 BAT20-7T2 ........................280 BAT20-7T23 .......................280 BAT20-7T234H....................280 BAT20-7T24H .....................280 BAT20-7T3 ........................280 BAT20-7T34H .....................280 BAT20-7T4 ........................280 BAT20-7T44H .....................280 BAT20-7T4H.......................280 BAT20-7T5 ........................280 BAT20-7T54H .....................280 BAT20-7T6 ........................280 BAT20-7T7 ........................280 BAT20-7T9 ........................280 BAT20CD ..........................276 BAT20CD1 .........................276 BAT20CW ..........................276 BAT20CW1 ........................276 BAT20-G4..........................279 BAT20-G5..........................279 BAT20-G8..........................279 BAT20-G9..........................279 BAT20-GD1 ........................279 BAT20-GD10 ......................279 BAT20-GD14H ....................279 BAT20-GD4BAC ...................279 BAT20-GDBEHS...................279 BAT20LW ..........................278 BAT20LW1.........................278 BAT20LWA ........................278 BAT20LWS ........................278 BAT20UBL .........................281 BAT20UBL1 .......................281 BD111............................... 76 BD122............................... 76 BD133............................... 76 BD308............................... 76 BL10 ...............................100 BL12 ...............................100 BL14 ...............................100 BL16 ...............................100 BL2 .................................100 BL20 ...............................100 BL24 ...............................100 BL4 .................................100 BL5 .................................100
Item
Page
BL6 .................................100 BL7 .................................100 BL8 .................................100 BL9 .................................100 BLK12 ..............................100 BLM10 .............................100 BLM15 .............................100 BLM2...............................100 BLM25 .............................100 BLM3...............................100 BLM4...............................100 BLM5...............................100 BLM6...............................100 BLM8...............................100 BLMK10 ...........................100
C CL120 ........................ 255-256 CL120KIT ..........................257 CL120VP...........................257 CL150 ..............................257 CL220 ........................ 255-256 CL320 ........................ 255-256 CL320KIT ..........................257 CL360 ..............................257 CL390 ........................ 255-256 CL440 ........................ 255-256 CL600 ........................ 255-256 CL700 ........................ 255-256 CL800 ........................ 255-256 CL900 ........................ 255-256 CLMBRSPN .......................154 CLMBRSTRP ......................154
D D2000-28 ........................... 18 D200028GLW ...................... 18 D2000-28-INS ....18, 142, 148-149 D2000-48 ..................... 19, 134 D2000-48-INS ....19, 142, 148-149 D2000-49........................... 19 D2000-7 ............................ 13 D2000-7CST ....................... 16 D2000-8 ............................ 13 D2000-9NE ................... 13, 138 D2000-9NECR ..................... 14 D2000-9NEGLW ................... 13 D2000-9NE-INS...13, 142, 148-149 D2000-9NETH...................... 14 D2000-9NETP.......... 14, 120, 134 D2000-9ST ......................... 16 D201-7CST ......................... 16 D201-7CSTA ....................... 16 D201-7CSTLFT..................... 16 D201-7CSTT ....................... 16 D201-7NE .......................... 15 D201-8NE .......................... 15
Pliers
Numerical Page
Page
ET600 ..............................260 ET900 ..............................273 ET910 ..............................273 ET920 ..............................273
H H1802-30 ..........................316 H1802-30S ........................316 H1802-30SR ......................316 H1802-30SSR.....................316 H267 ...............................314 H268 ...............................314 H80332 ............................102 H80718 ............................102 H80816 ............................102 H80820 ............................102 HD2000-9NE ....................... 13 HD213-9NE......................... 13 HD213-9NETH ..................... 14 HVNCVT-1 .........................274 HVNCVT-2 .........................274
Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
333
Voice/Data/Video
www.kleintools.com > 800-553-4676
Tool Storage
J248-8 .............................. 19 J502-10 ..................27, 136-137 J63050 .............................. 39 J63225N ............................ 39 JTH410E ............................ 97 JTH4E06 ............................ 97 JTH4E07 ............................ 97 JTH4E08 ............................ 97 JTH4E09 ............................ 97 JTH4E10 ............................ 97 JTH4E11 ............................ 97 JTH4E12 ............................ 97 JTH4E13 ............................ 97 JTH4E14 ............................ 97 JTH4E15 ............................ 97 JTH4E17 ............................ 97 JTH610E ............................ 97 JTH610EB .......................... 97 JTH67T ............................. 98 JTH68M............................. 98 JTH68MB ........................... 98 JTH6E06 ............................ 97 JTH6E06BE ......................... 97 JTH6E07 ............................ 97 JTH6E07BE ......................... 97 JTH6E08 ............................ 97 JTH6E08BE ......................... 97 JTH6E09 ............................ 97 JTH6E09BE ......................... 97 JTH6E10 ............................ 97 JTH6E10BE ......................... 97 JTH6E11 ............................ 97 JTH6E11BE ......................... 97 JTH6E12 ............................ 97 JTH6E12BE ......................... 97 JTH6E13 ............................ 97 JTH6E13BE ......................... 97 JTH6E14 ............................ 97 JTH6E14BE ......................... 97 JTH6E15 ............................ 97 JTH6E15BE ......................... 97 JTH6E17 ............................ 97 JTH6E17BE ......................... 97 JTH6M10 ........................... 98 JTH6M10BE ........................ 98 JTH6M2............................. 98 JTH6M25 ........................... 98 JTH6M25BE ........................ 98 JTH6M2BE ......................... 98 JTH6M3............................. 98 JTH6M3BE ......................... 98 JTH6M4............................. 98 JTH6M4BE ......................... 98 JTH6M5............................. 98 JTH6M5BE ......................... 98 JTH6M6............................. 98 JTH6M6BE ......................... 98 JTH6M8............................. 98 JTH6M8BE ......................... 98
Jobsite Accessories
J J1005 ............................... 36 J12098 .............................. 15 J2000-28 ........................... 18 J200048 ...........................137 J2000-48 ..................... 19, 136 J2000-59 ........................... 19 J20008 .............................. 13 J2000-9NE ......................... 13 J2000-9NECR ...................... 14 J2000-9NECRTP ............. 14, 120 J2000-9NETP .......... 14, 120, 136 J203-6 .............................. 23 J203-7 .............................. 23 J2038 ..............................137 J203-8 .............................. 23 J203-8N ...................... 23, 136 J206-8C............................. 24 J207-8CR ........................... 24 J2138NE ............................ 13 J213-9NE ........................... 13 J213-9NECR ....................... 14 J2139NECRN....................... 14 J2139NETP ........................137 J213-9NETP .................. 14, 120 J215-8CR ........................... 15 J215-9CRTP........................ 15 J228-8 .............................. 18
Page
Safety, PPE and Comfort
I IR07 ................................268 IR1 .................................269 IR10 ................................269 IR1KIT .............................269 IR5 .................................269
Item
Tool Kits
E ET05................................268 ET10................................268 ET110 ..............................272 ET120 ..............................272 ET130 ..............................273 ET140 ..............................273 ET16................................270 ET160 ..............................272 ET180 ..............................271 ET20................................270 ET250 ........................134, 263 ET300 ..............................267 ET310 ..............................267 ET40................................263 ET45................................263 ET45VP ............................263 ET60................................263
Page
Conduit Tools and Measurement
D301-6 .............................. 24 D301-6C ............................ 24 D302-6 .............................. 25 D307-51/2C ........................ 24 D318-51/2C ........................ 25 D320-41/2C ........................ 26 D321-41/2C ........................ 24 D322-41/2C ........................ 24 D327-51/2C ........................ 24 D333-8 ........................ 28, 119 D335-51/2C ........................ 25 D502-10 .................27, 134-138 D502-10-INS ......27, 143, 148-149 D502-10TT ......................... 27 D502-12 ............................ 27 D502-12TT ......................... 27 D502-16 ............................ 27 D502-6 .............................. 27 D502-6TT ........................... 27 D504-10 ............................ 27 D504-10B........................... 27 D504-12 ............................ 27 D504-12B........................... 27 D504-7 .............................. 27 D506-4 .............................. 86 D507-10 ...................... 86, 136 D507-12 ............................ 86 D507-6 .............................. 86 D507-8 .............................. 86 D509-8 .............................. 86 D511-6 .............................. 26 D511-8 .............................. 26 D511-10 ............................ 26 D514-8 .............................. 26 D86930 ............................. 87 D86932 ............................. 86 D86934 ............................. 86 D86936 ............................. 86 DK06 ................................ 48
Item
Drivers and Wrenches
D202-6.............................. 20 D202-6C ............................ 20 D203-6.............................. 23 D203-6C ............................ 23 D203-6H2 .......................... 23 D203-6-INS ............ 23, 143, 148 D203-7.............................. 23 D203-7C ............................ 23 D203-7-INS ............ 23, 143, 148 D203-8...................23, 135-138 D203-8-GLW ....................... 23 D203-8-INS .......23, 143, 148-149 D203-8N ...................... 23, 134 D203-8NCR ........................ 23 D203-8N-INS......23, 143, 148-149 D209-4C ............................ 20 D209-5C ............................ 20 D210-6C ............................ 20 D213-8NE .......................... 13 D213-9.............................. 13 D213-9NE ...............13, 137-138 D213-9NE-CR ...................... 14 D213-9NE-CR-INS........... 14, 142 D213-9NE-INS ......... 13, 142, 149 D213-9NETH ..... 14, 102, 156, 277 D2139NETP .......................138 D213-9NETP ......14, 120, 135-137 D213-9NETT ....................... 13 D213-9ST........................... 16 D213-9STT ......................... 16 D220-7.............................. 20 D220-7-INS ............ 20, 142, 148 D227-7C ............................ 21 D228-7.............................. 18 D228-8.............................. 18 D228-8-INS ............ 18, 142, 149 D228-8TT ........................... 18 D2291............................... 25 D230-4C ............................ 21 D232-8.............................. 28 D234-6.............................. 26 D234-6C ............................ 26 D238-8.............................. 19 D240-6.............................. 20 D243-8.............................. 18 D244-5C ............................ 20 D245-5.............................. 20 D248-8...................19, 135-138 D248-8-GLW ....................... 19 D248-8-INS .................. 19, 142 D248-9ST........................... 19 D248-9STT ......................... 19 D252-6.............................. 20 D252-6SW.......................... 20 D257-4.............................. 20 D257-4C ............................ 20 D259-4C ............................ 20 D275-5.............................. 21 D295-4C ............................ 20
Item
Strippers, Cutters, and Crimpers
Item
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories Lifting, Pulling, and Structural
Numerical Item
Page
JTH6T10 ............................ 98 JTH6T15 ............................ 98 JTH6T20 ............................ 98 JTH6T25 ............................ 98 JTH6T27 ............................ 98 JTH6T30 ............................ 98 JTH6T40 ............................ 98 JTH910E ............................ 97 JTH98M............................. 98 JTH9E06 ............................ 97 JTH9E07 ............................ 97 JTH9E08 ............................ 97 JTH9E09 ............................ 97 JTH9E10 ............................ 97 JTH9E11 ............................ 97 JTH9E12 ............................ 97 JTH9E13 ............................ 97 JTH9E14 ............................ 97 JTH9E15 ............................ 97 JTH9E17 ............................ 97 JTH9M10 ........................... 98 JTH9M2............................. 98 JTH9M25 ........................... 98 JTH9M3............................. 98 JTH9M4............................. 98 JTH9M5............................. 98 JTH9M6............................. 98 JTH9M8............................. 98
K K11095 ............................. 32 K12035 ............................. 31 K12065CR .......................... 31 K14 .................................. 77 K1412 ......................... 32, 134 K1412CAN.......................... 32 K16 .................................. 77 K19 .................................. 77 K23 .................................. 77 K28 .................................. 77 K34 .................................. 77 K36 ..............................69, 77 K38 .................................. 77 K44 .................................. 77 K46 .................................. 77 K48 .................................. 77 KHH56220.........................152 KHHSPN ...........................155 KHHSPN2..........................153 KHHSTRP..........................155 KHHSWTBND ............... 154-155 KHHSWTBND2 ....................153 KHHTOPPAD ................ 154-155 KHHTOPPAD2.....................153 KN1500PEX .......................314 KN1500PEXH .....................314 KN1600PEX .......................314 KP075-24 ..........................311
334
Item
Page
KP075-36 ..........................311 KP100-24 ..........................311 KP100-36 ..........................311 KP150-36 ..........................311 KPJ100 ............................311 KPJ50 ..............................311 KPJ75 ..............................311 KPL125-1 ..........................311 KPL150-1 ..........................311 KPL200-1 ..........................311 KPM050 ...........................311 KPM075 ...........................311 KPM100 ...........................311 KPS050-2..........................311 KPS062-2..........................311 KPS075-2..........................311 KPS100-2..........................311 KPS100-3..........................311 KPS125-2..........................311 KPS150-2..........................311 KPS150-3..........................311 KPS200-2..........................311 KPS200-3..........................311 KPS250-2..........................311 KPS300-2..........................311 KPS350-2..........................311 KSCK100-1 ........................311 KSSK125-1 ........................311 KT151T ............................. 93 KT152T ............................. 93 KT155HD ........................... 93 KT155T ............................. 93 KT223X4 ............................ 94 KT223X4-INS ...................... 94 KT4500 ............................305 KT45005C .........................305 KT4501 ............................305 KT4502 ............................305 KT4600 ............................305 KT4601 ............................305 KT4602 ............................305 KT4800 ............................305 KT4801 ............................305 KT4802 ............................305 KTB1000 ...........................182 KTB500 ............................183 KTSB01 ............................284 KTSB03 ............................284 KTSB11 ............................284 KTSB14 ............................284 KTSB15 ............................284
L LBL100 ............................127 LL10................................100 LL12................................100 LL14................................100 LL16................................100
www.kleintools.com > 800-553-4676
Item
Page
LL2 .................................100 LL20................................100 LL24................................100 LL4 .................................100 LL5 .................................100 LL6 .................................100 LL7 .................................100 LL8 .................................100 LL9 .................................100 LLK12 ..............................100 LLM10 .............................100 LLM15 .............................100 LLM2 ...............................100 LLM25 .............................100 LLM3 ...............................100 LLM4 ...............................100 LLM5 ...............................100 LLM6 ...............................100 LLM8 ...............................100 LMK10 .............................100
M M200ST.........................16, 28 M201-7CSTA ....................... 16 MAG2 .....................64, 68, 134 MM300 ............................259 MM320KIT ........................260 MM400 ............................259 MM600 ............................259 MM700 ............................259
N NCVT-1P ...........................264 NCVT-2P ...........................264 NCVT2PKIT ........................265 NCVT-3P ............... 134-135, 264 NCVT3PKIT ........................265 NCVT-4IR ..........................264 NCVT-5A ...........................264 NCVT5KIT .........................265 NCVT-6.............................264 NRHD ..............................277 NRHD3 .............................277 NRHD4 .............................277 NRHDA.............................277 NRHDA3 ...........................277 NRHDA4 ...........................277
P P12 .................................. 76 PH115..............................288 PH1355 ............................288 PH162..............................288 PH2115 ............................288 PH2355 ............................288 PH262..............................288
Item
Page
PH315..............................288 PH3355 ............................288 PH362..............................288 PJSFM1 ............................181 PND125 ............................288 PND71610 .........................288 PND7165 ..........................288 PND91610 .........................288 PND9165 ..........................288
R RT110 ..............................266 RT210 .................. 134-135, 266 RT250 ..............................265 RT250KIT ..........................265 RT310 ..............................266
S S1018 ............................... 83 S1018M............................. 83 S106 ................................ 83 S106M .............................. 83 S11 .................................. 83 S116 ................................ 83 S12 .................................. 83 S126 ................................ 83 S-12H ............................... 94 S1613-40H ........................302 S1656-20H ............294, 298, 300 S1656-30H ............294, 298, 300 S1656-40H ............294, 298, 300 S1656-50H ............294, 298, 300 S1656-60H ..................294, 300 S166 ................................ 83 S1684-5H..........................302 S1684-74H ..................292, 302 S-18H ............................... 94 S5118PRS .........................194 S66 .................................. 83 S-6H................................. 94 S8 ................................... 83 S86 .................................. 83 SK234 ............................... 77 SL1415 ............................288 SL14355 ...........................288 SL31615 ...........................288 SL316355 .........................288 SRS56036 .........................114 SRS56037 .........................114 SRS56038 .........................114 SRS56980 .........................114 SRS56981 .........................114 STP001 ............................104 STP100 ............................104
Pliers
Numerical Page
T
V
Page
VDV826-605 ......................235 VDV826-611 ......................238 VDV826-628 ..........238, 242, 244 VDV826-702 ......................238 VDV826-703 ......................238 VDV826-704 ......................238 VDV826-705 ......................238 VDV826-728 ......................238 VDV826-729 ......................238 VDV826-754 ......................238 VDV826-762 ......................238 VDV826-763 ......................238 VDV826-764 ......................238 VDV999-033 ......................235 VDV999-064 ......................234 VDV999-068 ......................252 VDV999-074 ......................234 VDV999-076 ......................233 VDV999-078 ......................234 VDV999-200 ......................247 VISORCLR .........................154 VISORGRAY .......................154
Tool Kits Safety, PPE and Comfort Jobsite Accessories Tool Storage Voice/Data/Video Test and Measurement Power Tools and Accessories
www.kleintools.com > 800-553-4676
335
Lifting, Pulling, and Structural
VDV427-821 ......................237 VDV427-822 ......................237 VDV500-063 ......................252 VDV500-123 ......................252 VDV500-705 ......................251 VDV500-820 ......................252 VDV501-211 ......................251 VDV501-212 ......................251 VDV501-213 ......................251 VDV501-214 ......................251 VDV501-215 ......................251 VDV501-216 ......................251 VDV501-217 ......................251 VDV501-218 ......................251 VDV501-219 ......................251 VDV501-220 ......................251 VDV501-221 ......................251 VDV501-222 ......................251 VDV501-823 ......................245 VDV501-828 ......................250 VDV501-829 ......................250 VDV501-851 ................ 248-249 VDV501-852 ................ 248-249 VDV501-853 ................ 248-249 VDV512-056 ................249, 251 VDV512-100 ................243, 247 VDV512-101 ......................247 VDV512-110 ......................247 VDV526-052 ......................244 VDV526-055 ................249, 251 VDV526-100 ......................247 VDV526-200 ......................247 VDV726-125 ......................249 VDV770-125 ................ 248-249 VDV770-126 ................ 248-249 VDV770-127 ................ 248-249 VDV770-500 ......................252 VDV770-834 ......................251 VDV770-850 ......................248 VDV770-851 ......................248 VDV770-855 ......................251 VDV812-606 .......... 239, 242-243 VDV812-612 ......................239 VDV812-615 ................239, 242 VDV812-618 ......................239 VDV812-623 ................238, 242 VDV812-624 ......................238 VDV812-627 ................238, 243 VDV813-607 ................239, 242 VDV813-613 ......................239 VDV813-616 ................239, 242 VDV813-619 ......................239 VDV814-609 ......................238 VDV824-650 ......................238 VDV826-600 ................238, 242 VDV826-601 ......................238 VDV826-602 ......................238 VDV826-603 ................238, 242 VDV826-604 ......................235
Item
Conduit Tools and Measurement
VDV000-133 ......................242 VDV001-081 ......................237 VDV001-819 ......................245 VDV001-833 ......................242 VDV002-818 ......................243 VDV002-820 ......................243 VDV011-832 ......................242 VDV011-852 ......................243 VDV026-049 ....................... 26 VDV026-211 ......................243 VDV026-212 ......................244 VDV026-812 ......................244 VDV026-831 ......................242 VDV027-813 ......................245 VDV110-046 ....................... 34 VDV110-061 .... 232, 242-243, 245 VDV110-095 ......................232 VDV110-261 ................232, 244 VDV110-295 ......................232 VDV200-010 ................ 234-235 VDV201-040 ......................235 VDV201-042 ......................235 VDV205-035 ......................235 VDV205-036 ......................235 VDV205-039 ......................235 VDV205-044 ......................235 VDV211-037 ......................235 VDV211-038 ......................235 VDV211-041 ......................235 VDV211-043 ......................235 VDV211-048 ..........233, 242, 245 VDV211-063 ................233, 242 VDV211-100 ......................232 VDV212-008-SEN ..........233, 243 VDV212-034 ......................235 VDV226-005 ................234, 238 VDV226-011 .......... 238, 244-245 VDV226-011-SEN ..........234, 244 VDV226-107 ..........234, 238, 242 VDV226-110 ................233, 238 VDV226-817 ......................244 VDV327-103 ................ 236-237 VDV427-013 ......................245 VDV427-015-SEN ..........236, 245 VDV427-016-SEN ................236 VDV427047 .......................245 VDV427-104 ................ 236-237 VDV427-110 ......................236 VDV427-300 ......................236
Page
Drivers and Wrenches
T1710 ............................... 37 T1715 ............................... 37 TI250 ...............................271 TT1 .................................168 TT2 .................................168
Item
Strippers, Cutters, and Crimpers
Item
NOW TRUST THEM OFF-THE -CLOCK
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Safety, PPE and Comfort
Klein Tools has a variety of tools to make your customer’s forget about the stress of work and enjoy all that life has to offer.
Jobsite Accessories
Tool Kits
Conduit Tools and Measurement
YOU PUT YOUR TRUST IN KLEIN PRODUCTS ON-THE-CLOCK,
98002BT Klein Bottle Opener
98028 Klein Leather Coasters, 6pk 98222 Klein BBQ Tool Set 98288 Klein Canvas Apron
Lifting, Pulling, and Structural
Power Tools and Accessories
Test and Measurement
Voice/Data/Video
Tool Storage
98022 Klein Key Chain
For a additional information on our promotional branded products visit www.kleintools.com/catalog/branded-collection
Pliers
Strippers, Cutters, and Crimpers
Drivers and Wrenches
BRANDED
Conduit Tools and Measurement
MERCHANDISING
Tool Kits
Safety, PPE and Comfort
Jobsite Accessories Tool Storage
Voice/Data/Video
Test and Measurement
Lifting, Pulling, and Structural
www.kleintoolsgear.com
Power Tools and Accessories
For a complete line of our branded merchandise visit
Pliers Strippers, Cutters, and Crimpers Drivers and Wrenches Conduit Tools and Measurement
CONTRACTOR COMMUNICATION
Tool Kits
RESOURCE
Scan the QR code to learn more about the following value-add programs
• Custom Kits
• Preferred Pro
• Tool Conversion
• On-Site Events
• Quarterly New Products
• Product Demonstrations
GO MOBILE Text 52165 to receive alerts about new
Power Tools and Accessories
Scan the QR code to see our complete line of products
products and chances to win FREE tools
Lifting, Pulling, and Structural
Test and Measurement
Voice/Data/Video
Tool Storage
Jobsite Accessories
Safety, PPE and Comfort
Learn how Klein Tools will partner with your company to save time and money.
www.kleintools.com
TRADESMAN CLUB Join the Tradesman Club at www.kleintradesmanclub.com for newest products, innovations and chances to win FREE tools
98342.2203 © 2022 Klein Tools, Inc.